http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.
They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.
can we get some pics? the product wasn't displayed good on there site
it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this
enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.
Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji
phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?
The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App
Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App
senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.
phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.
yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.
phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.
senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.
Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).
Related
Check out the review with some Q&A here...
http://androidforums.com/htc-evo-4g/88106-sprints-body-glove-protective-cover-evo-4g.html
As for this vs the Siedio case, I'm thinking this one is a bit thinner and would fit in my pocket easier.
wow like the bodyglove cover.whats the price? and can i buy one online?
GHOST99K said:
wow like the bodyglove cover.whats the price? and can i buy one online?
Click to expand...
Click to collapse
It's 29.99 - and will be available at Sprint stores upon launch. You might be able to grab one now depending on how charismatic you are...
As for online, the online sprint store may be selling them - not sure, you'd have to check on the 4th.
Nice I like the look of that case and I just orderd the ghost armor case as you get the whole body armor for 14.99, the bodyglove might be better but I might use both, and then be covered for everything...
im usually not a fan of these type cases but i think ill grab it for the honeymoon period also
Will never get another body glove again. Their tabs break off all the time. Went through two of them in a month for my TP2.
damm i checked the sprint accessory online store and its not available yet i guess but ill b heading to the store to c if they got any before launch.so far got screen protector for the SUPERSONIC.
I've been searching online for the past couple of days for a case for my Evo. I really want this body glove case. I am going to stop by my Corporate Sprint Store tomorrow on my way to work to see if they have any and if they would let me buy one. I called them earlier last week about another matter and the store associate started talking about the Evo. When I told him I would have mine this past Friday he was shocked and wanted to see it. So maybe...and I mean maybe if I go up there show them my Evo and everything they may be nice and let me get one of the cases. Plus I have a Sprint Premier Account, so we'll see.
sanjsrik said:
Will never get another body glove again. Their tabs break off all the time. Went through two of them in a month for my TP2.
Click to expand...
Click to collapse
Has anyone had similar issues? Have you tried other cases? If so, what would you recommend for protection and as slim as possible...
keatre said:
Has anyone had similar issues? Have you tried other cases? If so, what would you recommend for protection and as slim as possible...
Click to expand...
Click to collapse
YES! I've had the exact same results with the Samsung moment case, the front panel is held on by 4 small plastic tabs.
These tabs easily break off just by taking the case on and off. I replaced my case twice after giving up completely and going naked. I'll never buy Body Glove again.
I would be very careful with the Body Glove or Seidio cases. I bought the Seidio Innocase II and put it on my iPhone 3GS on day one. When I got it ready for sale a few days ago, I removed the case to find some scratches on the chrome bezel. The felt on the rear protected the back just fine. If they lined the entire case with it, then it would be good. The bezel on the Evo appears to be shiny plastic, so I would expect it to scratch even easier than the metal iPhone bezel.
I've tried other cases...
keatre said:
Has anyone had similar issues? Have you tried other cases? If so, what would you recommend for protection and as slim as possible...
Click to expand...
Click to collapse
I have tried other cases, they are of the cheaper rubber cases that have this interlocking mechanism on top and bottom that were okay, the fit wasn't good but the cases were good. The unfortunate thing is that comparing a TP2 case with the Evo case is apples and oranges.
That IS until I saw that the Evo case is also a 2-piece snap on. If there is no sliding keyboard why then is it a two piece snap on and not a once piece hard case? The tabs break, pure and simple. If the reset button is under the back cover, every time you take off the back bodyglove cover, you risk breaking the tabs holding the case in place.
When I say I have gone through two bodyglove cases, I wasn't kidding. The thing looks good, until the case parts start randomly popping off because the tabs have broken off. Not really a protector then, is it?
sanjsrik said:
I have tried other cases, they are of the cheaper rubber cases that have this interlocking mechanism on top and bottom that were okay, the fit wasn't good but the cases were good. The unfortunate thing is that comparing a TP2 case with the Evo case is apples and oranges.
That IS until I saw that the Evo case is also a 2-piece snap on. If there is no sliding keyboard why then is it a two piece snap on and not a once piece hard case? The tabs break, pure and simple. If the reset button is under the back cover, every time you take off the back bodyglove cover, you risk breaking the tabs holding the case in place.
When I say I have gone through two bodyglove cases, I wasn't kidding. The thing looks good, until the case parts start randomly popping off because the tabs have broken off. Not really a protector then, is it?
Click to expand...
Click to collapse
Hmm, well thanks a lot guys, I've definitely changed my mind on this case. I'll probably go naked until Otterbox comes out with a case (in which case the honeymoon phase will be over, and I'll be more worried about long-term protection).
keatre said:
Hmm, well thanks a lot guys, I've definitely changed my mind on this case. I'll probably go naked until Otterbox comes out with a case (in which case the honeymoon phase will be over, and I'll be more worried about long-term protection).
Click to expand...
Click to collapse
Give the Sprint Silicone Case a try. I got it and love it. It's nice and cheap especially with a 25% premier customer discount. It covers everything, slips on easy and comes off easy, good fit, and it actually makes the power button easier to hit and feel.
http://shop.sprint.com/NASApp/onlin...=Carry+&+Protect&selectedAccessoryID=CZH1980R
Its pretty nice. I have it and its decently built. Only structural issue I see is by the volume keys. But otherwise seems quite solid.
I like the look of the case, very cyber, but if it splits the longest way around the edge& is only held together with little tabs, I'd look elsewhere. On a one-piece phone with no moving parts there is no sense in it. I'm looking at the Seidio since it has the smallest seam, it goes around the middle, and is made to be held in holster. I don't like shoving phones in my pocket any way and especially not this giant thing. Second choice might be the Sprint one with multi colors or the silicone one.
I love my Evo body glove
I bought My body glove from the Dover, NH Sprint store from wireless link. The thing is amazing picked it up for $20 (special discount)
When I bought my evo, they had that body glove case at the store for $20. I got it, and I like it. It almost has an "iron man" type of look to it. The thing I liked about it was that it was thick enough to protect the camera, meaning when you laid it down, the camera didnt touch anything.
It is a pain in the butt to take off though. It has the back piece and then a really cheap-feeling front piece, and they clip together around the phone. Its hard to un-clip them at that point. I've already bent the hell out of the side of the front piece, but it still looks alright.
Regardless of that, I'd say its worth getting.
i have it like above mentioned feels cheap when taking on or off but when on its great protects camera lense i have no complaints so far i might be grabbing one of those 3500mah batteries so ill probably have to change sooner or later
You guys should try this case too. (Incipio Feather case) I spent like 3 days searching for the perfect case for my captivate (from silicone case to leather pouch) and this one has by far the best quality and look, not to mention about the extreme thinness. Got it this afternoon and fits perfect to the phone and looks great as in the picture. The only draw back is that it doesn't cover the front side, but I can live with that.
I loved that case with my iphone, it's crazy light and thin. The only problem I had on my iphone is all I could get was white and it got nasty dirty in a week, so I would advise against white
Sent from my SGH-I897
samzoferrari said:
You guys should try this case too. (Incipio Feather case) I spent like 3 days searching for the perfect case for my captivate (from silicone case to leather pouch) and this one has by far the best quality and look, not to mention about the extreme thinness. Got it this afternoon and fits perfect to the phone and looks great as in the picture. The only draw back is that it doesn't cover the front side, but I can live with that.
Click to expand...
Click to collapse
Is it made of the soft rubber like material that gathers dust?
it's made of plastic, but looks like it's mixed w/ some sort of rubber or soft material because it's got that little bit of soft touch. (maybe that's why it's more flexible too) So far it doesn't gather any dust like some silicone cases do, but i will have to see more since i just got it today.
i wish they had more colors. Black phones get lost in the void that is my purse.
ladymelody said:
i wish they had more colors. Black phones get lost in the void that is my purse.
Click to expand...
Click to collapse
Ebay captivate incipio and they have the exact same case but in pink (but its called magenta)
From the eBay description: "With a convenient two-part sliding design, the EDGE™ embodies innovative cases focused on accessibility. Simply remove the bottom cap to dock your device in most any docking station for quick and easy charging."
I have a home dock I put the phone in every night. This is the main reason I stopped using a case. How does this design work with the Samsung dock? I can't tell from the pictures and I'm not willing to risk $25 to find out.
Miami_Son said:
From the eBay description: "With a convenient two-part sliding design, the EDGE™ embodies innovative cases focused on accessibility. Simply remove the bottom cap to dock your device in most any docking station for quick and easy charging."
I have a home dock I put the phone in every night. This is the main reason I stopped using a case. How does this design work with the Samsung dock? I can't tell from the pictures and I'm not willing to risk $25 to find out.
Click to expand...
Click to collapse
Not sure if you realize but the EDGE is a different case than the Feather, which is what the OP got. Again, sorry if you knew that. Just thought you might not realize.
fooldog01 said:
Not sure if you realize but the EDGE is a different case than the Feather, which is what the OP got. Again, sorry if you knew that. Just thought you might not realize.
Click to expand...
Click to collapse
I thought so, but the one I was looking at on eBay (that I took that quote from) matched the one in the pic the OP posted.
Just wondering if this slides on like a silicone case or if it clips on like other hard plastic cases, is it hard plastic or like a hard silicone?
Any way you could take a picture, the incipio site doesn't really show anything to great about it?
Does it fit tight?
How does it hook on?
Even though I'm a dude I'm tempted to get the "Magenta" one just to spruce up my phone haha.
Is it hard to get on and off? I need to replace my battery once a day.
The Feather is 1 piece that snaps on, and from the pictures, it looks like it only hugs the corners. The EDGE is a 2 piece snap on case.
*taken from http://www.myincipio.com/
Does anyone have any photos of this case from the top or sides? I can't find any real world or manufacturer pics of that.
that looks nice
it doesn't cover the edges and by the looks of it, it only protects the back and if you place it face down it won't lift the phone off the surface any
It looks nice but it doesn't protect anything. The corners and front have no protection. With my experience when you drop a phone the corners get messed up
I ordered this case for my wife:
http://cgi.ebay.com/SILVER-BLACK-FL...461939?pt=PDA_Accessories&hash=item4156763633
It came in and it fits perfectly, its slightly rubberized feeling so its grippy and its slim. I tested it and it works in a pocket without sticking to the pocket liner.
The nicest thing I like is that the graphics are several layers deep, giving it an interesting depth to it. Ill try to take some pics with my Tbolt of her Tbolt in the case.
Not bad for 6 bucks. The only drawback I noticed but she does not care about is that some of the graphics of the front and back piece do not line up perfectly on the seam.
I also ordered her another similar case but more flowery. Ill post when that comes in.
I bought a solid black one from the same seller. It is a nice case for the price. Looks good and appears to be good quality. Only time will tell if it begins to peel.
Here's a few pictures of the case.
im so torn over whether to use a case on this or not. if it had gorilla glass i wouldnt care.
Being a 2 piece case, how well does it hold together from a fall? If it landed on its edge is it going to pop open?
Hard to tell. I don't want to drop it and test it for obvious reasons.
But it does snap together pretty well and its not terribly easy to open it back up and take it off.
Here are a few pictures of the second case I ordered for her from Amazon. This one looks even better than the other. And it snaps the same, front/back, but it feels a little less sturdy. It does not snap as strongly as the other.
possible to get a pic of the two pieces separately?
how is the power button? easy to push?
Which "finish'' are these cases? I see there are a different ones listed.
bad4u6669 said:
possible to get a pic of the two pieces separately?
how is the power button? easy to push?
Which "finish'' are these cases? I see there are a different ones listed.
Click to expand...
Click to collapse
Here are two pics of the two pieces of the case.
Power button opening is quite large so my entire thumb pad fits well and the button is not obstructed at all.
I have no idea on name for finish, they are rubberized plastic. So they are grippy on the outside and won't slip. But they are smooth plastic on the inside. Also, its not grippy to where it clings to pocket liners, its fine in my jeans and in my khakis and suit for work.
I just need to find one I like for myself now. Maybe something like this:
http://www.amazon.com/HTC-ThunderBolt-Incredible-Rubberized-Shield/dp/B004LSYEC2/ref=pd_rhf_shvl_32
or this:
http://cgi.ebay.com/ABSTRACT-ART-RF-CASE-HTC-THUNDERBOLT-4G-CHARGER-/230598620069
Also, some people praise TPU cases, what s TPU? Plastic or the jelly kind?
man that case on ebay is vibrant! I went for the hard/rubberized case from the same seller. figure if i dont like it or it beaks after a few months im only out 6$
as long as it can stand falling off my lap when i stand up im good.
bad4u6669 said:
man that case on ebay is vibrant! I went for the hard/rubberized case from the same seller. figure if i dont like it or it beaks after a few months im only out 6$
as long as it can stand falling off my lap when i stand up im good.
Click to expand...
Click to collapse
Very nice case indeed
TPU (or Thermoplastic polyurethane) is like silicone, except much sturdier and glossier. http://en.wikipedia.org/wiki/Thermoplastic_polyurethane
I got the shell/holster combo from VZW and I love it. It is slim and grippy.
Ordered my case yesterday. Got it today. That person don't mess around. Damn good case for the price too. I got the rubberized black one. Had to graba Sharpe and mark the inside edges black, cause they were showing white when clipped together.
This thing will stay together for a few falls. Can't beat it for this price.
Sent via bits and bytes
Cool. Can you take some pictures? I went ahead and got the dark red/burgundy one. Ill get the arty/colorful one when it drops in price a tad.
1st complaint
I removed the case for the first time today. I used a penny in the access slot on te side and it chipped away some of the black. I had to use a sharpie to fill it in so it wouldnt be so obvious.
Any good recommendations? I'm not a big fan of magnet on cases and seems most reasonably priced (<$30) folio style cases have magnet strip.
Sent from my Inspire 4G using XDA Premium App
Can't post link as of yet, but go to Amazon and type in "Acase Samsung 10.1 case". Its full name is "Acase Samsung GALAXY Tab 10.1 High Quality Premium Slim Leather Case Folio"
This is the case I ordered. It's got good customer reviews. It's non magnet and around the price point you mentioned.
http://www.amazon.com/Acase-Samsung...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Great looking case btw.. Never even thought to check Amazon.
Thanks for the recommendation.. Ordering mine today.
Roocase ultra slim
Roocase Ultra Slim
Got this instead from pcmicrostore.com. Amazon cells it too but pcmicro has 20% off tablet accessory code 20OFFTABLET so turned out to be cheaper. Also got a screen protector there. I prefer that case over Acase for a little more protection. Also it's genuine leather. $26 shipped.
Thanks for the heads up on the coupon code. I had been on the fence on a case and this sealed the deal for me. You just saved me $8. Thanks!
frenchie746 said:
http://www.amazon.com/Acase-Samsung...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Great looking case btw.. Never even thought to check Amazon.
Thanks for the recommendation.. Ordering mine today.
Click to expand...
Click to collapse
I got one of these and sent it back. Aside from the horrible smell of the material they use to make it the stand function was very limited and you have to unsnap the bottom clips that hold the tab to the case to fold it back to stand it up. Eventually that will probably scratch the paint off the corners of the tab. It did fit well.
I have the Acase and the bottom things aren't even clips. More like rests and it will not rub the paint off. The tab is held by only the top four clips. The only problem with this case is lack of a hole for the charger when closed. My case did not have smell and if it did I think a lil spray of febreeze or your favorite cologne could take care of that. Also the case has 4 angles to choose from so I don't think that the stand is limited.
I posted a review and pics of the case in the big cases thread going.
haas599 said:
I have the Acase and the bottom things aren't even clips. More like rests and it will not rub the paint off. The tab is held by only the top four clips. The only problem with this case is lack of a hole for the charger when closed. My case did not have smell and if it did I think a lil spray of febreeze or your favorite cologne could take care of that. Also the case has 4 angles to choose from so I don't think that the stand is limited.
I posted a review and pics of the case in the big cases thread going.
Click to expand...
Click to collapse
Agreed. I just received my case and there's no foul odor. It smells like what leather is supposed to smell (even which you'd have to literally put your nose up to the case to get any smell).
The case fits perfectly and the material is very nice. The only minor grip I have is that the lowest angle is a little too steep for a comfortable typing. It does work well on a table, but not so well lying down in bed. The ipad 2 version of the exact same case has a bend in the front side which allows an angle for more comfortable typing. I don't know why Acase got rid of that position for this version, but I'm sure they have their reasons.
zariman said:
Agreed. I just received my case and there's no foul odor. It smells like what leather is supposed to smell (even which you'd have to literally put your nose up to the case to get any smell).
Click to expand...
Click to collapse
Mine smelled like a dead meat. The whole room where I opened it smelled. My wife thought the cat died. If that's what leather is supposed to smell like I'm gonna sell my truck, couch and the cow grazing in my garage. Obviously I got a bad one. It also felt more like vinyl than fine corinthian leather.
As for the bottom clips (or whatever they were) folding back a third of the case to stand it up wasn't my idea of good design.
You are of course entitled to your opinion. My opinion is the "official" Samsung case, for the few bucks extra, is much better designed, better fitted and less odoriferous.
Still can't charge with the case closed on the official case. The official case has fewer resting positions and the little flap that holds it in place is prone to fall out in the upright position. Because Samsung wanted the case to be thin, they sacrificed good padding around the tab.
I find it hard to believe your case smelt like "a dead meat". I got the Acase for $20 shipped so the Samsung is a lil' more than a few bucks more.
haas599 said:
Still can't charge with the case closed on the official case. The official case has fewer resting positions and the little flap that holds it in place is prone to fall out in the upright position. Because Samsung wanted the case to be thin, they sacrificed good padding around the tab.
I find it hard to believe your case smelt like "a dead meat". I got the Acase for $20 shipped so the Samsung is a lil' more than a few bucks more.
Click to expand...
Click to collapse
Well, after spending $600 on the tablet, I guess $22 more seemed to me as "just a little." As far as how my case "smelt" I'm not concerned whether you believe it or not. Since Amazon got it back it's now their concern.
Product Link: http://amzn.com/B0062V037Q
I'm not really prepared to give a full review of this case yet since I just put it on today and haven't "lived" with it for very long, but I wanted to go ahead and post some pics for anyone who might be interested. These pics are of a Galaxy Nexus LTE with extended battery. I believe it's designed to fit the LTE with standard battery, but it fits just fine with the extended battery.
What I can tell so far -- the glossy/gel part of this case is rubbery and sticks to hard surfaces, but doesn't seem to stick to fabric/clothes so i don't think it'll be a problem getting in and out of pockets. The matte part is like a textured plastic -- very smooth and not sticky at all. The gel fits around the front and sticks up only a fraction above the screen like it's supposed to, so you can lay it face down and the screen won't touch the surface. Anyway, here are the pics.
If I'm missing any angles that anyone wants to see, let me know and I'll take more pics. I'll try to add some more opinions about this case after I've carried it around a little.
how flexible is the case?
Thanks for sharing large photos, it really helps to show the fit of the case. Think I'll go ahead and order one.
For those who have a different case, it would be nice to see those cases posted in a similar fashion.
I have this case too and I believe it was molded to fit the GSM version. I've had both versions of the phone and it fit the GSM version perfectly. The Verizon version (even without the extended batt) does not fit quite right. You can see it clearly in your 4th pic how it bulges out and does not hug the edges of the screen area properly. I also don't care for the button areas, as they are both enclosed and make it difficult to locate the buttons by feel.
Thanks. I just picked up one in green and it seems to fit fine over the extended battery. I am still able to find the power button because it has a different texture than the rest of the side.
It will probably take a few days to see if it is better out worse that the gel I got at Verizon. So far, so good. And it was on sale!
Sent from my Galaxy Nexus using xda premium
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
ludow said:
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
Click to expand...
Click to collapse
i don't think that is the same case. the one i got is made by Qubits.
@halo0: yes, i can tell this case wasn't made for the extended battery, and i can see what you're talking about in picture 4, but i don't notice any bulge in actual use, and i'm pretty anal about my cases.
also, like @VivianC mentioned, it's easy to find the power and volume buttons by touch because of the difference in texture.
ludow said:
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
Click to expand...
Click to collapse
My case was around £3 and is IDENTICAL to the pictures above and this link.
Don't spend more than $10/£5 on this case.
The reason why I am getting rid of this case is because it makes the screen/sleep button quite weird to press. (However, having this case for nearly a month you get used to it)
Sadly, lint and dirt collects easily around the lip of the case where it touches the screen.
There are NO issues with this case pulling up the screen protector edge. (I've read how someone said cheap TPU cases sometimes do this)
Does provides good protection for small knocks and drops! - Dropped my phone on wood floor twice and was well protected!
Got these on amazon for 8 each.green one for my girl black for myself. Barely noticeable and I actually think it fits better with the extend battery than the standard, mine (with extended battery) just feels better than hers without. Good skin, very pleased with it
Sent from my Galaxy Nexus using XDA App
I have three different colors (red, clear, and black) of this case and I have to say I am very pleased with them. They were made for the GSM version but they still fit pretty good with the CDMA's. (Small buldge that was previously mention) Paid $5 for the red and the clear one. $8 for the black one. I'd recommend it for those prices.
I've got this and I really don't like the button covers. They're to stiff for my liking. Amazon carries this for $9.99 with two screen protectors and a micro fiber pouch.
Sent from my ICY+ Galaxy Nexus