Any good recommendations? I'm not a big fan of magnet on cases and seems most reasonably priced (<$30) folio style cases have magnet strip.
Sent from my Inspire 4G using XDA Premium App
Can't post link as of yet, but go to Amazon and type in "Acase Samsung 10.1 case". Its full name is "Acase Samsung GALAXY Tab 10.1 High Quality Premium Slim Leather Case Folio"
This is the case I ordered. It's got good customer reviews. It's non magnet and around the price point you mentioned.
http://www.amazon.com/Acase-Samsung...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Great looking case btw.. Never even thought to check Amazon.
Thanks for the recommendation.. Ordering mine today.
Roocase ultra slim
Roocase Ultra Slim
Got this instead from pcmicrostore.com. Amazon cells it too but pcmicro has 20% off tablet accessory code 20OFFTABLET so turned out to be cheaper. Also got a screen protector there. I prefer that case over Acase for a little more protection. Also it's genuine leather. $26 shipped.
Thanks for the heads up on the coupon code. I had been on the fence on a case and this sealed the deal for me. You just saved me $8. Thanks!
frenchie746 said:
http://www.amazon.com/Acase-Samsung...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Great looking case btw.. Never even thought to check Amazon.
Thanks for the recommendation.. Ordering mine today.
Click to expand...
Click to collapse
I got one of these and sent it back. Aside from the horrible smell of the material they use to make it the stand function was very limited and you have to unsnap the bottom clips that hold the tab to the case to fold it back to stand it up. Eventually that will probably scratch the paint off the corners of the tab. It did fit well.
I have the Acase and the bottom things aren't even clips. More like rests and it will not rub the paint off. The tab is held by only the top four clips. The only problem with this case is lack of a hole for the charger when closed. My case did not have smell and if it did I think a lil spray of febreeze or your favorite cologne could take care of that. Also the case has 4 angles to choose from so I don't think that the stand is limited.
I posted a review and pics of the case in the big cases thread going.
haas599 said:
I have the Acase and the bottom things aren't even clips. More like rests and it will not rub the paint off. The tab is held by only the top four clips. The only problem with this case is lack of a hole for the charger when closed. My case did not have smell and if it did I think a lil spray of febreeze or your favorite cologne could take care of that. Also the case has 4 angles to choose from so I don't think that the stand is limited.
I posted a review and pics of the case in the big cases thread going.
Click to expand...
Click to collapse
Agreed. I just received my case and there's no foul odor. It smells like what leather is supposed to smell (even which you'd have to literally put your nose up to the case to get any smell).
The case fits perfectly and the material is very nice. The only minor grip I have is that the lowest angle is a little too steep for a comfortable typing. It does work well on a table, but not so well lying down in bed. The ipad 2 version of the exact same case has a bend in the front side which allows an angle for more comfortable typing. I don't know why Acase got rid of that position for this version, but I'm sure they have their reasons.
zariman said:
Agreed. I just received my case and there's no foul odor. It smells like what leather is supposed to smell (even which you'd have to literally put your nose up to the case to get any smell).
Click to expand...
Click to collapse
Mine smelled like a dead meat. The whole room where I opened it smelled. My wife thought the cat died. If that's what leather is supposed to smell like I'm gonna sell my truck, couch and the cow grazing in my garage. Obviously I got a bad one. It also felt more like vinyl than fine corinthian leather.
As for the bottom clips (or whatever they were) folding back a third of the case to stand it up wasn't my idea of good design.
You are of course entitled to your opinion. My opinion is the "official" Samsung case, for the few bucks extra, is much better designed, better fitted and less odoriferous.
Still can't charge with the case closed on the official case. The official case has fewer resting positions and the little flap that holds it in place is prone to fall out in the upright position. Because Samsung wanted the case to be thin, they sacrificed good padding around the tab.
I find it hard to believe your case smelt like "a dead meat". I got the Acase for $20 shipped so the Samsung is a lil' more than a few bucks more.
haas599 said:
Still can't charge with the case closed on the official case. The official case has fewer resting positions and the little flap that holds it in place is prone to fall out in the upright position. Because Samsung wanted the case to be thin, they sacrificed good padding around the tab.
I find it hard to believe your case smelt like "a dead meat". I got the Acase for $20 shipped so the Samsung is a lil' more than a few bucks more.
Click to expand...
Click to collapse
Well, after spending $600 on the tablet, I guess $22 more seemed to me as "just a little." As far as how my case "smelt" I'm not concerned whether you believe it or not. Since Amazon got it back it's now their concern.
Related
http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.
They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.
can we get some pics? the product wasn't displayed good on there site
it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this
enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.
Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji
phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?
The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App
Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App
senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.
phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.
yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.
phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.
senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.
Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).
Looks like the iPad case, but leather and only $17.99 with free shipping on eBay.
http://cgi.ebay.com/Samsung-Galaxy-Tab-10-1-GT-P7510-Leather-Case-Cover-BLK-/190542584350?pt=PDA_Accessories&hash=item2c5d391a1e
Anyone try this one yet? I'm going to buy one and I'll post a review once I get it.
A few pics:
I just ordered one as well. The pictures look good. We'll see what it's like when it arrives.
Note: the price is now $18.99 with free shipping.
The case showed up today from the eBay seller and I have to say I'm quite pleased.
It's fairly sturdy, holds the tablet snugly in place with a velcro strap, has perfectly aligned openings for the camera, charging port, headphone jack etc., has all the other features of an iPad case like folding up to incline for typing or watching movies and when closed it's held shut with hidden magnets.
I've put all the pictures I took of the case into an album for those of you who are looking for a case.
http://imgur.com/a/9jJMY#4iBov
If you'd like me to take more pictures of a certain side of the case just let me know
PhyerFly said:
The case showed up today from the eBay seller and I have to say I'm quite pleased.
It's fairly sturdy, holds the tablet snugly in place with a velcro strap, has perfectly aligned openings for the camera, charging port, headphone jack etc., has all the other features of an iPad case like folding up to incline for typing or watching movies and when closed it's held shut with hidden magnets.
I've put all the pictures I took of the case into an album for those of you who are looking for a case.
http://imgur.com/a/9jJMY#4iBov
If you'd like me to take more pictures of a certain side of the case just let me know
Click to expand...
Click to collapse
Nice, thank you so much for the amazing pictures.
So when it's shut down it doesn't open up by mistake? The magnets attach to the tablet itself?
It's certainly the best price for this type of case.... now I am torn between this one and the official book sleeve case (which is $ 60!)
rubi76 said:
So when it's shut down it doesn't open up by mistake? The magnets attach to the tablet itself?
Click to expand...
Click to collapse
No, when it's closed it stays shut and is very solid. The magnets are in the edges of the flap that closes and in the part that covers the bezel of the tablet (right where the front-facing camera is).
Because of how sleek and light the GT10.1 is I didn't want a case that would add too much bulk like the ones I've seen for the XOOM. As long as it holds together this case fits the bill perfectly and I don't see myself replacing it
Nice find! Wish I would of read this thread earlier. For the $17.99 price with free shipping why not? Personally I'd raise that price if I were them!
This is actually Polyurethane (PU) and not leather. But I'm sure you all assumed that given the price
edit: Apparently you can get these in 5 different colors if your order directly from China: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220798495079
OneStepAhead said:
Nice find! Wish I would of read this thread earlier. For the $17.99 price with free shipping why not? Personally I'd raise that price if I were them!
This is actually Polyurethane (PU) and not leather. But I'm sure you all assumed that given the price
edit: Apparently you can get these in 5 different colors if your order directly from China: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220798495079
Click to expand...
Click to collapse
It's the "PU" that scares me. I got a "PU" case for my Nook Color and it stunk so bad I had to leave it outside. P.U.! It smelled like dead meat.
MisterEdF said:
It's the "PU" that scares me. I got a "PU" case for my Nook Color and it stunk so bad I had to leave it outside. P.U.! It smelled like dead meat.
Click to expand...
Click to collapse
Ive had that happen before as well with PU
Sent from my GT-P7510 using XDA Premium App
I've been using mine for a week now and I'm quite happy with it, especially for the price I paid.
When using it as a stand, it's not the most stable unless you arrange it so that you're viewing it "upside-down" but it'd be fine as long as it's on a stable surface.
Weight?
Do you have the specs on the weight of this case? I want one that is *really* *really* light to go with the low weight of the gtab
This a nice find. I will definitely keep this in mind.
Sent from my GT-P7510 using Tapatalk
I really like this case.
I currently have the belkin slim folio case but I find very hard to insert and take the tab out because the case is very tight and its material generates too much friction.
Is it hard to insert and take the tab out from this case?
Thanks!
Cheaper case Item number: 150622771410 http://cgi.ebay.co.uk/Black-Leather...K_iPad_Tablet_Accessories&hash=item2311d118d2
ZENUS LEATHER BAND CASE Item number: 200621541201 http://cgi.ebay.co.uk/ZENUS-LEATHER...t=LH_DefaultDomain_0&var=&hash=item746b8352ce
Expensive case Item number: 310324624222 http://cgi.ebay.co.uk/Leather-Case-...K_iPad_Tablet_Accessories&hash=item4840c9fb5e
PhyerFly said:
Looks like the iPad case, but leather and only $17.99 with free shipping on eBay.
http://cgi.ebay.com/Samsung-Galaxy-Tab-10-1-GT-P7510-Leather-Case-Cover-BLK-/190542584350?pt=PDA_Accessories&hash=item2c5d391a1e
Anyone try this one yet? I'm going to buy one and I'll post a review once I get it.
Click to expand...
Click to collapse
This looks like same one only on Amazon.co.uk:
http://www.amazon.co.uk/SAMSUNG-GAL...VY/ref=sr_1_15?ie=UTF8&qid=1309113518&sr=8-15
PhyerFly said:
The case showed up today from the eBay seller and I have to say I'm quite pleased.
It's fairly sturdy, holds the tablet snugly in place with a velcro strap, has perfectly aligned openings for the camera, charging port, headphone jack etc., has all the other features of an iPad case like folding up to incline for typing or watching movies and when closed it's held shut with hidden magnets.
I've put all the pictures I took of the case into an album for those of you who are looking for a case.
http://imgur.com/a/9jJMY#4iBov
If you'd like me to take more pictures of a certain side of the case just let me know
Click to expand...
Click to collapse
I just bought one based on your review. Thanks for posting this. It seems like the best case for the money so far. How many days did it take from ordering till you received it? I'm hoping to have it before camping this weekend.
Also, it has to be unfolded to be charged correct?
Hm... this looks like a nice case for carrying the tab around. I actually got a soft gel (TPU) case just to be able to throw the tablet around at home since I already have a screen protector. And I like how it's texturized on the sides for better grip.
http://cgi.ebay.com/ws/eBayISAPI.dl...94520&ssPageName=STRK:MEWNX:IT#ht_2922wt_1158
Will keep this case cover in mind though. Looks nice enough.
for about $16.. pretty nice
http://www.ctcstore.com/Acase-Samsung-GALAXY-Tab-10.1-High/M/B0057I6ZVI.htm
radiohead14 said:
for about $16.. pretty nice
http://www.ctcstore.com/Acase-Samsung-GALAXY-Tab-10.1-High/M/B0057I6ZVI.htm
Click to expand...
Click to collapse
Looks nice, but could we fold the cover flap fully to the back, in case we want to hold the tab in book reading mode
I just ordered one of those from amazon.
Bad thing is that for me, shipping was even more expensive (15$) than the cover itself (14$)...
I think you can fold the cover flap fully to the back, in case you want to hold the tab in book reading mode. Take a look at a video on youtube about this case, but ipad version. Search for "Review: Acase Slim Leather Folio Case with Stand for iPad 2".
doesn't look like it. there's no crease on the front cover like the ipad case i have.
i bought one earlier and it should be here next week. now i'll have a matching set for my ipad, gt7 and gt10.1.
madsquabbles said:
doesn't look like it. there's no crease on the front cover like the ipad case i have.
i bought one earlier and it should be here next week. now i'll have a matching set for my ipad, gt7 and gt10.1.
Click to expand...
Click to collapse
Aw man, didn't see that. If only it is a mistake with the pictures and the cover we receive is OK... I think that crease helps you type on the best position. Well, you know better that you have the I pad version.
you can rest the bottom on the "latch" and put in a slightly upraised position. i just find it a little too bouncy when doing that while typing.
I have the same case for my 7" Galaxy Tab and am very happy with it. The quality is that of a much more expensive case. If I had not already bought another case I would be picking one of these up.
Unless I am seeing it wrong in the photos the problem with this case is that you have to constantly detach it from the BOTTOM HALF of the TAB to use it in a tilted position. This is how that $90 Zenus brand carbon fiber case I bought and returned worked. It was a real PITA plus it will eventually wear the paint off the tab.
i prefer that than the extra thickness (like belkin folio case). i haven't had any chipping or scratching on either of my other tablet's yet, but i did bend all those tabs a bit after getting them to make it easier to pull out. i even loosened the cover latches a bit too.
Since a fair few of you will now have one of these, I was just looking to get some thoughts and opinions on one please?
Also I know it can stand vertical with this case on, but can it stand landscape?
Thanks
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
TecQuality said:
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
Click to expand...
Click to collapse
I've seen that it can stand vertical on it's own when the case is on, I was wondering if it could stand landscape too?
Thanks
Sent from my GT-I9100 using Tapatalk
Yeah, it's a great little case. I bought the black one, and i'm looking at getting a blue one next. Really cheap for official ones from Trusted Sellers on ebay (roughly £7 without original packaging, £10 with)
the only downside is it lets dust through the little holes, so you get a neat little dust pattern on the back side of your phone - a regular removal and wipe on your trousers helps.
I've had one on it for about 2 weeks and I like it, only drawback is I had to shave down by USB connector plastic to get it to fit while the case is still on. I ordered another from dealextreme because it was really cheap. I notice the case just touches the mic area but doesnt cover it up. I like it because it's not very bulky and the plastic 'mesh' back fits over a soft case and makes it rigid and easy to hold.
Good luck for u
Got a generic cheap mesh case from eBay, its pretty awesome but as mentioned above, gets a bit dirty after some long time, and mine is cheap enough to start breaking on corners, had a few falls tho, and that's the purpose of a case, so the phone doesn't break instead
I had this case, it was okay at the start but in the end the plastic on the top corner started breaking away. Also the one and only time I dropped my phone with this case on I got a nasty scratch just above the screen where there was no protection. I had to ditch it. I'm using a plain black tpu case now, much more protection. The advantage of the mesh case is that its so slim.
Edit : Oh yea and its a dust magnet.
Got the original mesh case, I dropped it twice since I got it. First time no damage at all, protected the phone nicely. Second time the phone popped out of the case as it hit the floor (shoulder hight, had a nice spin to it also) but both the case and the phone didn't suffer any damage. So I guess it serves it's purpose and looks nice as well.
Aesthetically nice.
Crap if you want proper protection.
I bought it merely to protect the camera and back when I put the phone down to prevent scratching. For overall phone protection it's definitely going to be lacking as the top and bottom edges of the phone aren't covered. The case clips on easily but stays on fairly tightly. The rubbery material gives better grip when holding the phone. Dust does get in over a week or so over the back of the phone, though isn't noticeable with the case on, and can easily be wiped off. I think the case looks pretty nice, all key areas are fully accessible and for the price of about £8 was worth it.
is not compatible for i9100P
I've just buy the genuine Samsung mesh vent case for my Samsung Galaxy S2 win NFC (i9100P) but it is NOT compatible. My colleague on the i9100, not NFC, perfect fit.
Some ideas?
Light, strong and keeps the thinness we all love about our S2s!
Dropped mine a couple of times on to wooden floors and no damage yet
Protects the camera lens too when lying on a flat surface
The dust comments are true but only noticeable when u take the cover off so no big deal and it fits so snugly it kinda looks part of the phone!
To answer original question tho, no only stands in portrait
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Andrewawright said:
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Click to expand...
Click to collapse
I'll take the case if it's on offer, let me know your thoughts on shipping to Australia Figure you sent all your convicts here, so a case shouldn't be a problem
Hi All,
I just ordered this case for my wife's A100.
http://www.amazon.com/gp/product/B0060N4OIK/ref=oh_o00_s00_i00_details
I have a case for my A500, from the same manufacturer, that I am very happy with.
Should get it later today. I can post my thoughts on it once it arrives if anyone is interested.
Wow, this case looks excellent--just like the one I had on my Transformer. Thanks for posting!
Just e-mailed seller, no shipping to Canada, and no equivalent cases on eBay
KevOne said:
Just e-mailed seller, no shipping to Canada, and no equivalent cases on eBay
Click to expand...
Click to collapse
Just wait, when they are new it just takes some time.
How is this only $15????? And eligible for Amazon Prime, too!
This case is absolutely phenomenal.
Feels like you're holding a dense leather rectangle of quality.
-Fit and finish is perfection
-Thing is completey rigid (no twist or slop-- unlike those bezel-covering slide-in-pocket flip cases)
- Stand is solid and stable
- The clasp mechanism feels fantastic (really, when this thing is closed, it feels locked down).
- Protects the screen, back plastic, and corners. Seems to offer about as much shock/crush/drop protection as any case I've ever seen, yet adds very little in the way of bulk and mass.
- Access to all ports/plugs
Can't exaggerate how much I love this case. Protection factor aside, the thing simply makes me like using my table more.
Thanks for the review! Definitely going with this case now.
Sent from my HTC Inspire 4G using Tapatalk
Glad to hear my review was useful--post back with your impressions of the case when you get a chance.
[email protected]! I waited too long and Amazon is sold out with no restock date. There are several cases out there, but the Blurex was the only one I saw with corner clips instead of the chunky looking leather frame.
I contacted Blurex to see if there were any other resellers, and they said that it would be back in stock on Amazon shortly. A few hours later, and it's back in stock!
how sure are you that it would help survive a fall while open and in use...looks like it would pop out...
trying to decide between thsi and
the acer bumpter case
http://us.acer.com/ac/en/US/content/model/LC.BAG0A.070
Depending on height of fall and hardness of contact surface, I'm not sure I'd bet on a pane of glass in any case, but the Blurex's corner-clips do hold the tablet with some serious authority. It'd take some funky, but not impossible, physics to pop it out.
The bumper case you linked to looks like what I had in mind before going for the Blurex offering. I figured the small form factor made the A100 more like a reach-for-it-and-go phonelet than a full tablet, so I wanted a hard, snap case with no flap to contend with. When using the tablet in portrait, I'll occasionally get annoyed with the folded-back flap, but the more complete protection and premium/professional appearance/feel of the Blurex case more than make up for it.
I received the Blurex case mentioned by the OP yesterday.
Quite frankly, I have not seen any case fit any device better.
It significantly reduces the amount of bulk the "OEM" case has;
Because it basically has *no* sides, it does not have the OEM case's problem of ports not lining up quite right; and
Its material seems higher quality and is easier to grip in my opinion.
Also, under current (not Black Friday) pricing, it costs only half as much.
Very nice case i like it
Sent from my A100 using xda premium
I received the blurex case today, ordered based on what I read here.
It does seem well-made and I very much like that it adds very little to the dimensions and weight of the A100.
At first the clasp that closes the cover annoyed me when holding it open in portrait to read like a book. (I use Kindle frequently.) The sharp corner dug into the side of my finger.
Then I got out a nail file and just lightly softened the one corner and that pretty much took care of the problem.
As a result, the rounded clasp actually works as a finger hold to grasp the tablet in one hand without putting my thumb on the screen. (See photos.)
Overall, it's a pretty good addition.
I ordered mine last night. I hate the actual case that acer puts out. Cant wait for this one to come in...
My BluRex case arrived yesterday, and it's even smaller than I expected. It a very nicely made case (especially for the price), and fits like a really tight glove (insert OJ joke here). My only concern is that the clip that holds the cover closed might wear through the finish on the side of the tablet over time. Otherwise, great case! Highly recommended!
DaveRichardson said:
Depending on height of fall and hardness of contact surface, I'm not sure I'd bet on a pane of glass in any case, but the Blurex's corner-clips do hold the tablet with some serious authority. It'd take some funky, but not impossible, physics to pop it out.
The bumper case you linked to looks like what I had in mind before going for the Blurex offering. I figured the small form factor made the A100 more like a reach-for-it-and-go phonelet than a full tablet, so I wanted a hard, snap case with no flap to contend with. When using the tablet in portrait, I'll occasionally get annoyed with the folded-back flap, but the more complete protection and premium/professional appearance/feel of the Blurex case more than make up for it.
Click to expand...
Click to collapse
great! thanks so much for the quick reply...after receiving the unit, and looking at it ocmpared to the car mount we have, think this case will be perfect for it.
Out of stock
It appears that Amazon is out of these... I've checked a couple dozen Google links for the case and they all lead back to the Amazon "out of stock" page.
Anyone know of another source for these cases?
Thanks.
Blurex was out of stock, but stumbled across this at Bureau En Gros.
Acer Portfolio, has a carbon finish and similar looking to the Blurex though not as slim as the Blurex.
All the ports and camera holes fit great. This model doesn't have a smell that i've read in other threads. It doubles as a stand too.
Cover holds down by a magnet, so no intrusive or wailing clasp.
Check out the attachments.
p.s. i had initially posted this in the A500 / A100 case thread, my apologies for double post
So Nolan, do you like the case?
Sent from my MB855 using XDA Premium App