Develop Bugs

Platinum Series Case for HTC EVO 4G from Best Buy - $30

http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.

They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.

can we get some pics? the product wasn't displayed good on there site

it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this

enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.

I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.

Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.

There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.

:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji

phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?

The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App

Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App

senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.

I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.

yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage

I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.

senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.

Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).

New Case Review - Perforated Plastic

I was tired of waiting for SGP to get their $^#& together and decided to get yet another case.
I got this Perforated Retro Sports Case from Fommy.com.
http://www.fommy.com/view-full-page.asp?divid=Samsung&model=Samsung+Vibrant+T959&skuno=89299
I'm not sure what makes it "retro", but it is a nice looking case. It's a combination of hard plastic (the perforated area) and flexible plastic sides. It's thin - not like the Samsung mesh or Case Mate Barely There - thin, but probably a touch thinner than the average TPU case.
The case covers all sides, although you can still see a bit of the bezel. However, unlike a different case I tried, the amount that peeks out is consistent all around so it still looks nice.
Now, it's not without it's quirks - which may be deal breakers for some. First there are no cutouts for the speaker or the mic. The speaker is no big deal because the case is perforated - I didn't really notice much difference in volume of some music I tried. The mic, on the other hand, required a hammer and nail to deal with. It was pretty simple, though. I just lined up the hole from another case and then hammered a small nail through. It works just fine and I tested some calls with no reports of sound loss on the receiver's end.
The other "quirk" is that the cutouts on the top and sides are a little strange. The one on the volume side is really long and spans over the rocker keys and the strap-loop-hole. It's tapered well along the edges so it doesn't look bad or anything, just a little odd. The top opening also spans across both the jack and the usb port. This makes the bar along the top feel a little less solid than the rest of the flexible areas. I would have preferred they used two separate openings on top rather than one for the extra support. It's also cut rather close to the port, so if you are using a thick plug, you have to move the plastic up a bit. A little annoying, but at least you don't have to take the case off to plug it in like with some cases.
Things may change after a week of use, but my initial impression is positive. Overall, the case is very nice and is unique compared to the other stuff that's currently available. I do, however, think it's a bit pricey at $14.95+shipping (around $5 for super saver). But hey, money grows on trees.

Just ordered mine, From the looks of it, I think i will like this case better than the perforated plastic snap on case. This one looks like it offers full phone protection. tell me if the case would protect the phone in the event of a fall or drop. Rate its protection from a fall as either minimal, moderate, or maximum protection. I would appreciate your advice. Thanks

Since it covers all sides the protection is going to be better than the snap on. But its thin and pretty stiff so impact resistance is probably minimal to moderate at best, especially compared to silicone or TPU.
Sent from my SGH-T959 using XDA App

thanks for the review, but i would be worried about knowing from the get go that i would need to use a hammer and nails to get a plastic case to work.

mikey98277 said:
thanks for the review, but i would be worried about knowing from the get go that i would need to use a hammer and nails to get a plastic case to work.
Click to expand...
Click to collapse
Very true. I didn't try calls before making the hole so I'm not entirely sure it's necessary (although I imagine you would get a drop in sound quality with the hole covered).

I love this case. It is slim and perfectly follows the contours of the phone. The only thing that i didnt like was the hole missing over the microphone. But the texture and quality of the case is top notch. I have the mesh galaxy s back cover, the tpu grey argyle case, the body glove rubber case, the case mate tough case, and the carbon fiber samsung case. This one is the best of them all, I am very happy with this case

whoa, that looks like it'd be pretty ****in sweet if they made them 2 tone..

turbosix said:
whoa, that looks like it'd be pretty ****in sweet if they made them 2 tone..
Click to expand...
Click to collapse
http://cgi.ebay.com/Black-Blue-XMat...268389?pt=PDA_Accessories&hash=item5d2b1cd525
Like this?

talltexan said:
http://cgi.ebay.com/Black-Blue-XMat...268389?pt=PDA_Accessories&hash=item5d2b1cd525
Like this?
http://s3.amazonaws.com/daydeal_com/t959_xmartrix_blublk1.jpg[/IG][/QUOTE]
i love you more than you could ever know. :eek:
Click to expand...
Click to collapse

turbosix said:
i love you more than you could ever know.
Click to expand...
Click to collapse
they also have pink and white if your into that just search Xmatrix Vibrant case. They are cheaper than OP's so i dont know if they are the same or not but they do look the same.

I ordered this case on Tuesday and it came today. I am very impressed and the quality is much better then I expected.

Did the one you got off Ebay come with the hole for the mic already cut? Looks in their photos like it's there already.

No i ordered it from fommy and I forgot about the missing mic hole lol.

dashed said:
No i ordered it from fommy and I forgot about the missing mic hole lol.
Click to expand...
Click to collapse
I ordered the blue and black one from fommy on thursday and received it today. Mine has the mic hole already cut out. In my opinion it feels just a little bit loose and kinda cheep. I like the way it looks and is very slim so I'm gonna give it some time to see if it grows on me or if i want something else

The black case I received fits extremely well and is not loose at all.

Great Deal on this Case
I'm getting one from Handhelditems.com found here xmatrix case and it's 10.99 and $2.89 shipping, plus I used coupon code 30vibrantsamsung and got 3.30 (30%) off. Price out the door - $10.54. Helluvuh deal

Got the case today. It sucks.
Sent from my SGH-T959 using XDA App

Incipio Silicrylic Case - Review

So I didn't find a thread for this case yet so I decided I would and put my review up for everything. I myself am not terribly picky when it comes to reviewing; I'm satisfied with most things I purchase. I hope this will help any who are thinking about buying this case.
First off, I love the look of the case. The mixture of soft and hard and the double color combo is what really made me want to get the case. It really stands out over the the tpu and silicone cases because of this. I got the the black hard cover with the gray inside silicone. Both colors were a bit lighter than what I was expecting; the black isn't true black more matte and the gray was a couple of shades lighter, a medium gray. The feel of each piece is nice also, very easy to grip and doesn't slide in your hands.
Now to the protection. This is where my one downside is to the case. I don't know if they all come this way, but my silicone is a bit looser than I was expecting. You can pull on the sides and they come away from the xoom, allowing dust and particles to go inside. This I felt should have been tighter, almost like a tpu case to keep the dust out. But thanks to the outer shell you don't notice it any where else. It doesn't slide around on the xoom and stays in place as a case should. (The reason I switched from just a silicone case, because it got too loose and didn't hold the xoom firmly) I really feel that if I dropped the xoom that the case wouldn't fall off and be able to protect it from any damage or scratches. Also the sides do come up a bit higher off the xoom than my silicone one from Verizon. The raised edge around the xoom makes the case feel a bit different, but I'm getting used to it.
Also, the pop out kickstand is a great feature. It stays nice and flat in the back and clicks into place, which was something I was worried about and not wanting it just flopping around back there. It holds nice on most surfaces unless its something slippery like a glass tile or something. I am able to peck type and it doesn't move or feel like its about to fall. There is a raised edge for the hinge but I never notice it when holding it unless you have huge hands possibly.
All the cutouts are there, even for the sd card! The buttons for the volume buttons are way easier than my old case since they are more defined. I do not have a dock so I can't tell whether its possible to dock in the case or not. (sorry for anyone who wants to know)
Hope this may help someone out there that's on the fence about this case! I would give it a 4.5/5 just docked because of the loose edges. Other than that I feel like I may not look for another case for a long time. Thumbs up to Incipio!
Here are a couple of pics I snapped that someone requested..
Edit: It also comes with a screen protector, which I haven't put on yet.

This looks very interesting. How durable do you think the pop out stand is? Does it look like it could break easily?
I know you said that you do not have a dock to test with, so I posted a question to Incipio if it will fit in the docking station. If I hear back I will post thier response.

I would say its pretty durable the hinge has a bit of give to it and the kickstand itself is thick enough that it wouldn't snap in half
Sent from my ADR6300 using XDA Premium App

So I was chatting with one of the Incipio customer service people and I asked if the Xoom could still be docked with the case installed and they said no. Not being one to take no for an answer I asked how thick the case was in the back so I can compare with my silicon skin. The CSR had no clue but promissed to email me the information as soon as they could get it. That was a couple days ago so we will see.
So would you be so kind to measure how thick the case is in back? Just for reference the silicon case is about 2mm thick. If I were to make a complete guess I bet this case is about 3-4mm thick. If I can find out how thick it is, I can artificially make my silicon case thicker to match and see if it will still dock.
I really like the looks of this case and the built-in stand is a nice feature, I just would hate to have to take it out of the case every night when I put my Xoom in the dock to charge.

HuckFinn said:
So I was chatting with one of the Incipio customer service people and I asked if the Xoom could still be docked with the case installed and they said no. Not being one to take no for an answer I asked how thick the case was in the back so I can compare with my silicon skin. The CSR had no clue but promissed to email me the information as soon as they could get it. That was a couple days ago so we will see.
So would you be so kind to measure how thick the case is in back? Just for reference the silicon case is about 2mm thick. If I were to make a complete guess I bet this case is about 3-4mm thick. If I can find out how thick it is, I can artificially make my silicon case thicker to match and see if it will still dock.
I really like the looks of this case and the built-in stand is a nice feature, I just would hate to have to take it out of the case every night when I put my Xoom in the dock to charge.
Click to expand...
Click to collapse
Any update on this? I just got the case and would like to get a dock as well
Sent from my Xoom using XDA Premium App

I got this too but I went for white and black, thought it looked cooler. It's not just you by the way, the sides are very loose. I think the best thing about this case is the kickstand. It stays put and I can actually Swype something on it. The angle is perfect for viewing content and it makes the device feel more snug and easier to grip. I think this is the best case thus far for the Xoom. It has a stand and it makes the device feel so much more safe.
Sent from my Xoom

Smokexz said:
I got this too but I went for white and black, thought it looked cooler. It's not just you by the way, the sides are very loose. I think the best thing about this case is the kickstand. It stays put and I can actually Swype something on it. The angle is perfect for viewing content and it makes the device feel more snug and easier to grip. I think this is the best case thus far for the Xoom. It has a stand and it makes the device feel so much more safe.
Sent from my Xoom
Click to expand...
Click to collapse
Well glad it isn't just me..
Btw, do you have the dock for the xoom? I am tossing around the idea of getting one, but if it doesn't fit with the case..

Confirmed the case will work with a standard dock if you remove the adapter plate from the dock.

yup i just got the speaker dock and it works without the case adapter though it is a bit loose.. wish they would've made the case adapter without the front goove/ledge bc it would fit if that wasn't there..

I do not have my dock here, but is it the thickness of the case that causes the problem or the lip on the front of the adapter plate? If it is just the lip that could easily be sanded/cut away.

I think it may fit if it didn't have the lip but the thickness on the bottom may make it too thick to plug in all the way anyway
Sent from my Synergy Rom using XDA Premium App

does xoom with this case fit on speaker dock?
Posted before I saw the other responses. The dock comes with a cutout for an encased Xoom but does not fit the Kevikev leather case (that I like otherwise). Wish there was a case I could just leave on the Xoom docked or closed up to carry around...
Thx
Rob

[Review] Momax UltraThin Case

Just a quick review of one of the better cases that I have come across...for those who dont like TPU and soft cases were the lip around the screen would easily peel back, and dont feel like actual part of the phone...Seems to be the only option was to run with no case, or them clip on cases.
The Momax UltraThin is the best case for myself at the moment, offering all that I am after, a phone that is still slim, protects it from minor scratches...I admit, not much drop protection but then, even thicker cases dont always promise absolute protection.
Anyways, the case is well lipped, accurate and precise, the holes for the buttons are well placed and shaped, overall very easy, as if there was no case on. The camera hole is well flushed to the camera itself.
Most of all this case actually clips on very tight and firm, just the way I like it...there is no give or any gap or loose points like TPU cases or SGP Neos...its just a firm case, that makes you feel like you are holding onto a phone without any added bulk...
Plus, the paint job on it is absolutely stunning...pretty flawless, high quality product...for a fair price...Ill let the photos do the talking...
Cheers.

Nice and simple case. The price seems cool too, thanks for sharing the product, I'll have a look at it!

Looks very nice. Where did you get it from?

plisk3n said:
Looks very nice. Where did you get it from?
Click to expand...
Click to collapse
I got mine on Ebay, shipping took about 1 week to New Zealand which is as slow as things get...

Also, is the material on the inside part of the case metal? I'm afraid it would scratch the plastic on the back of the phone if there's any rubbing.. ?

plisk3n said:
Also, is the material on the inside part of the case metal? I'm afraid it would scratch the plastic on the back of the phone if there's any rubbing.. ?
Click to expand...
Click to collapse
It is plastic, very smooth so I do not think it would scratch at all unless there is sand or other small hard particles between the case and phone.

What is different from other mesh cases ?

rouvax said:
What is different from other mesh cases ?
Click to expand...
Click to collapse
There are no mesh that allows small dusts to get between case and phone I suppose? I believe it also comes in transparent as well...

Have the same case - price and quality are perfect. I like that comparing to original phone materials this case feels like good-old soft-touch back panel. Only drawback I can find is that this case can be scratched easily - after a month of carrying my phone mainly in the pocket there appeared lots of small scratches. I bet this is due to the material of the case.

is there any problem with voice conversation like other ebay cases ?
No gps problem ?

raver2046 said:
is there any problem with voice conversation like other ebay cases ?
No gps problem ?
Click to expand...
Click to collapse
I havent had any issues with calls or GPS...

Not a fan of cases that expose the top or bottom of the phone so I am still looking while my S2 is in transit.
Thanks.

leather case for HTC U11+ anyone?

Can somebody please manufacture a high quality leather case for the HTC U11+ ?
I can't find one online. Does it even exist yet?
Please let me know if you find a good leather case for it.
Thank you.
The case should offer enough protection while at the same time supporting the edge sense feature.

I used the included Clear plastic case, AND then purchased a high quality leather case from Piel Frama which has a pull tab.
The IPhone 7 plus case is a perfect fit for the U11+ with the included clear case.
I don't think that there will be many cases for this device as the U12 is 6 months away.

globalgpj said:
I used the included Clear plastic case, AND then purchased a high quality leather case from Piel Frama which has a pull tab.
The IPhone 7 plus case is a perfect fit for the U11+ with the included clear case.
I don't think that there will be many cases for this device as the U12 is 6 months away.
Click to expand...
Click to collapse
can you show some picture about your leather case?

See attached photos.
Fits like a glove !

globalgpj said:
See attached photos.
Fits like a glove !
Click to expand...
Click to collapse
Great how much does it cost ?
what screen protection do you use (link please)?

See link below.
Hands down, Piel Frama makes the best quality leather cases in the world.
https://www.pielframa.com/en/producto/iphone-7-plus-cases/pull-style
There are a lot of colours and a couple of textures available.
I haven't used screen protectors for years. Not necessary if you use a pouch/case for protection.

globalgpj said:
See link below.
Hands down, Piel Frama makes the best quality leather cases in the world.
https://www.pielframa.com/en/producto/iphone-7-plus-cases/pull-style
There are a lot of colours and a couple of textures available.
I haven't used screen protectors for years. Not necessary if you use a pouch/case for protection.
Click to expand...
Click to collapse
thanks

There are 4 small holes on the bottom right of the pouch. This allows for the speaker notification sounds to come through easily when the phone is in the pouch. Very clever. Perfect for this device.

This is one of the many problems with the leather cases on amazon. The product images are clearly fake.

I found this online,
https://www.casefanatic.com/htc/bus...r-cover-oneplus-5-oneplus-5t-htc-u11-htc-u11/
Have no idea about the quality but it looks good to my eyes :fingers-crossed:
Edit: The exact same case as above is available in aliexpress for half the price.
Edit: I found one more https://www.noreve.com/en/u11/3475-htc-u11-leather-cover.html
The above link is for U11 but they are currently in the process for making it for U11+ as well. Expensive but looks very high quality.

http://bit.ly/2CnzvQe

frevell said:
http://bit.ly/2CnzvQe
Click to expand...
Click to collapse
Looks good but where is that magnetic thing to close the case?
Also how does the phone sit inside the case? I don't see a silicone cover glued inside the leather case...
Please show more pics of it.
Does it provide sufficient protection for the edges of the phone?
Are all buttons easily accessible?

lebigmac said:
Looks good but where is that magnetic thing to close the case?
Also how does the phone sit inside the case? I don't see a silicone cover glued inside the leather case...
Please show more pics of it.
Does it provide sufficient protection for the edges of the phone?
Are all buttons easily accessible?
Click to expand...
Click to collapse
I received it today (1-9) . Cannot find a magnet. So it will not close by itself. Inside there is a glued cover (plastic) Fits, nice. All buttons are accessible and all the microphones are accessible too. Smells like real leather. Nicely wrapped in a box and bubble plastic.

Noreve has 3 models available now for pre-order, I ordered one (back cover only), should get it by the end of the month...

frevell said:
I received it today (1-9) . Cannot find a magnet. So it will not close by itself. Inside there is a glued cover (plastic) Fits, nice. All buttons are accessible and all the microphones are accessible too. Smells like real leather. Nicely wrapped in a box and bubble plastic.
Click to expand...
Click to collapse
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
But, the opening to the volume and power -button is too small for me. You need small fingertips or use your nail to reach them. Its also missing an opening for the led at the top so I can't see it when charging or messages has arrived. Also it is very hard to use the fingerprint scanner if you don't have small fingertips. I have inform the seller/company about this and they will probably fix i in the next batch, they say.
As I said the quality is very good, exept what I have mentioned but maybe a bit overdone. With this case the package feels very thick, with the plastic bed for the phone and quite thick leather on top of that again. Solid, looks very exclusive no doubt, but to mutch I think.

fasst said:
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
But, the opening to the volume and power -button is too small for me. You need small fingertips or use your nail to reach them. Its also missing an opening for the led at the top so I can't see it when charging or messages has arrived. Also it is very hard to use the fingerprint scanner if you don't have small fingertips. I have inform the seller/company about this and they will probably fix i in the next batch, they say.
As I said the quality is very good, exept what I have mentioned but maybe a bit overdone. With this case the package feels very thick, with the plastic bed for the phone and quite thick leather on top of that again. Solid, looks very exclusive no doubt, but to mutch I think.
Click to expand...
Click to collapse
I got a new leather case today. https://goo.gl/ea8Jr4
It feels lighter and not so compact/heavy as the earlier mentioned case.
But this case as the earlier one is missing a hole/opening for the charger/message-LED. It seems that companies who make this leather cases is missing this. The LED is not visible on the phone until it lights up. On the first case I made a hole for it but on this one, if I make one, it will destroy one of the vertial seam.

fasst said:
I also got the same a few days ago. https://goo.gl/9t2V3u
It is of a very good qualtity and smells like real leather. The top cover attatch to the bottom with a magnet. If it don't you have to bend the top cover to back and front a few times because the new leather is stiff. After that mine attach to the bottom without any problem.
Click to expand...
Click to collapse
You are right. After a few days of use I noticed there is a magnet. Sorry.

Received my noreve case, I got the synthetic leather one, back only ( there was a discount going on at the time, got it for 29€). Took about 20 days for delivery.
First impression is very positive, on first sight feels like really high quality, the synthetic leather seems to be of a high quality kind, fits perfectly... exept two things, one I knew about, the other one, I could live with.
First is the big cut outs for the squeeze feature, they look kinda ugly and we know that this feature works with most cases anyway... Thats why I got the black case to minimize this cutout...but still, not good.
Second thing is that the back mic cutout is not centered, mind you it doesn’t cover the mic, but just barely.
So in its current state, I wouldn’t buy it again, but having started a mail exchange with them, as it is a handmade on order brand, I think I will be able to place a special order without the cutout and with the mic hole centered correctly...
Will let you know how it goes...

Ok so my last update on the noreve case, I decided to return the one I got, didn't look good with the big cutouts for the squeeze feature...
Also they couldn't accomodate my idea for a case without these cutouts, as it would have been too expensive and too difficult for a one off case...
Back to square one, did not find a really nice case yet...

ziplepingouin said:
Ok so my last update on the noreve case, I decided to return the one I got, didn't look good with the big cutouts for the squeeze feature...
Also they couldn't accomodate my idea for a case without these cutouts, as it would have been too expensive and too difficult for a one off case...
Back to square one, did not find a really nice case yet...
Click to expand...
Click to collapse
As I see the issue isn't in the case ...
sent from my translucent black hTc