Develop Bugs

Platinum Series Case for HTC EVO 4G from Best Buy - $30

http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.

They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.

can we get some pics? the product wasn't displayed good on there site

it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this

enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.

I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.

Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.

There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.

:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji

phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?

The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App

Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App

senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.

I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.

yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage

I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.

senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.

Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).

Cheap case looks and works pretty good.

I ordered this case for my wife:
http://cgi.ebay.com/SILVER-BLACK-FL...461939?pt=PDA_Accessories&hash=item4156763633
It came in and it fits perfectly, its slightly rubberized feeling so its grippy and its slim. I tested it and it works in a pocket without sticking to the pocket liner.
The nicest thing I like is that the graphics are several layers deep, giving it an interesting depth to it. Ill try to take some pics with my Tbolt of her Tbolt in the case.
Not bad for 6 bucks. The only drawback I noticed but she does not care about is that some of the graphics of the front and back piece do not line up perfectly on the seam.
I also ordered her another similar case but more flowery. Ill post when that comes in.

I bought a solid black one from the same seller. It is a nice case for the price. Looks good and appears to be good quality. Only time will tell if it begins to peel.

Here's a few pictures of the case.

im so torn over whether to use a case on this or not. if it had gorilla glass i wouldnt care.

Being a 2 piece case, how well does it hold together from a fall? If it landed on its edge is it going to pop open?

Hard to tell. I don't want to drop it and test it for obvious reasons.
But it does snap together pretty well and its not terribly easy to open it back up and take it off.
Here are a few pictures of the second case I ordered for her from Amazon. This one looks even better than the other. And it snaps the same, front/back, but it feels a little less sturdy. It does not snap as strongly as the other.

possible to get a pic of the two pieces separately?
how is the power button? easy to push?
Which "finish'' are these cases? I see there are a different ones listed.

bad4u6669 said:
possible to get a pic of the two pieces separately?
how is the power button? easy to push?
Which "finish'' are these cases? I see there are a different ones listed.
Click to expand...
Click to collapse
Here are two pics of the two pieces of the case.
Power button opening is quite large so my entire thumb pad fits well and the button is not obstructed at all.
I have no idea on name for finish, they are rubberized plastic. So they are grippy on the outside and won't slip. But they are smooth plastic on the inside. Also, its not grippy to where it clings to pocket liners, its fine in my jeans and in my khakis and suit for work.
I just need to find one I like for myself now. Maybe something like this:
http://www.amazon.com/HTC-ThunderBolt-Incredible-Rubberized-Shield/dp/B004LSYEC2/ref=pd_rhf_shvl_32
or this:
http://cgi.ebay.com/ABSTRACT-ART-RF-CASE-HTC-THUNDERBOLT-4G-CHARGER-/230598620069
Also, some people praise TPU cases, what s TPU? Plastic or the jelly kind?

man that case on ebay is vibrant! I went for the hard/rubberized case from the same seller. figure if i dont like it or it beaks after a few months im only out 6$
as long as it can stand falling off my lap when i stand up im good.

bad4u6669 said:
man that case on ebay is vibrant! I went for the hard/rubberized case from the same seller. figure if i dont like it or it beaks after a few months im only out 6$
as long as it can stand falling off my lap when i stand up im good.
Click to expand...
Click to collapse
Very nice case indeed

TPU (or Thermoplastic polyurethane) is like silicone, except much sturdier and glossier. http://en.wikipedia.org/wiki/Thermoplastic_polyurethane
I got the shell/holster combo from VZW and I love it. It is slim and grippy.

Ordered my case yesterday. Got it today. That person don't mess around. Damn good case for the price too. I got the rubberized black one. Had to graba Sharpe and mark the inside edges black, cause they were showing white when clipped together.
This thing will stay together for a few falls. Can't beat it for this price.
Sent via bits and bytes

Cool. Can you take some pictures? I went ahead and got the dark red/burgundy one. Ill get the arty/colorful one when it drops in price a tad.

1st complaint
I removed the case for the first time today. I used a penny in the access slot on te side and it chipped away some of the black. I had to use a sharpie to fill it in so it wouldnt be so obvious.

[Q] Barely There-type case for the Samsung Captivate

So it looks like Case-Mate does not make a Barely There type case for the Samsung Captivate. Are there any other good similar options out there?

incipio feather is similar...but its less flexible

For a truly "barely-there" experience, I've just installed a screen protector. Voila!

I used to use what noma_pride mentioned above and was quite happy until recently. The full body skins tend to peel up from the edges and eventually dull overtime requiring replacements which can become quite annoying.
IMO I found no case/skins best. I found these jackets made from microsuede from sfbags.com and they are awesome! Check them out http://www.sfbags.com/products/cellphonecases/cell-phone-cases.php

slntdth93 said:
incipio feather is similar...but its less flexible
Click to expand...
Click to collapse
Picked that up for my wife. She loves it. Thanks.

I personally like the flexible cases that body glove makes. The AT&T store sells this one, but I would not recommend getting it from them. Much cheaper through ebay. I had a hard case that snapped on, but found it covered up the sides and bottom too much. It affected dragging apps from main screen to other screens because you couldn't get your finger far enough to the side for the screens to scroll. Also I purchased a spare battery with battery charger and it was a pain to unsnap the case and swap batteries when I needed to. I have dropped mine with the body glove and phone still looked perfect. I am sure a hard enough drop would still be able to damage it though. The only thing about the body gloves that I think suck is only comes in black or pink.

I have a silicon case I bought in the mall (don't recommend that but I needed one as the lady one broke), and it's awesome. It's a harder silicon that still moved, and grips the phone like a condom. Our was made by an off brand, but I'm sure you can find it easily in any mall or online shop
sent from something somewhere

I think TPU cases are the best. They aren't "barely there" cases but the closest providing all the proctection you need. Price is a plus too. Try searching tpu in ebay

SGP Case Ultra Capsule (White) for the Galaxy Nexus

I purchased this case. I'm a sucker for white cases. I thought you VZW GNEX folks out there would like to know how it fits.
I'm sorry to say that I am a bit disappointed.
This case will probably be great for the GSM version. I was not satisfied with the fit on the Verizon G-NEX. As you can see the case is a bit shallow on top of the phone. Compared to the Verizon TPU cases, this case seemed loose and could slide off, again probably because this was meant for the GSM phone. As a note, I do not have the extended battery.

scorch968 said:
I purchased this case. I'm a sucker for white cases. I thought you VZW GNEX folks out there would like to know how it fits.
I'm sorry to say that I am a bit disappointed.
This case will probably be great for the GSM version. I was not satisfied with the fit on the Verizon G-NEX. As you can see the case is a bit shallow on top of the phone. Compared to the Verizon TPU cases, this case seemed loose and could slide off, again probably because this was meant for the GSM phone. As a note, I do not have the extended battery.
Click to expand...
Click to collapse
Well if you decide to sell it. Im your man :-D

I have the Black Version. Been using it for a few weeks now. I use mine with the Extended Battery and Backplate. It won't fall out, but I did mention (with pics) that it was too shallow at the top of the phone (where I never thought it would have a problem).
The phone fits good on the Extended battery backplate. Real nice and tight. The case fits perfectly at the bottom. The case lip is fine but only the top half is too shallow.
It still fits... not perfectly but fits. I've never had the case come off or remotely make me think otherwise. It is pretty good quality and I like that the black blends in with the screen pretty well.
That said, I did order a Diztronic v3 case with the button cutouts. It supposedly fits better. We'll see. I should be getting it Wednesday (or today!). I got the Smoke Gray and I probably won't like the color. I'm really digging the Matte Black or White but they didn't have any available during CES.
Here is my review of the SGP Capsule case: http://forum.xda-developers.com/showpost.php?p=21385362&postcount=42
Edit:
Mine seems to fit better. All my corners are covered, its only the buttons that are out of whack. Perhaps you got the GSM model.

Perhaps. Buttons alignment is good however.
Sent from my Galaxy Nexus using Tapatalk

I ordered a white one too. I am still waiting for it, but I am have the GSM version. I guess I will like mine when it comes

I think you will, build quality is good. I like a little bit of a lip around the screen so if it happens to fall face first, there is less of a chance of contact.

scorch968 said:
I think you will, build quality is good. I like a little bit of a lip around the screen so if it happens to fall face first, there is less of a chance of contact.
Click to expand...
Click to collapse
Thank you for the reassurance. How long did you have to wait to get your case? I am assuming you are in US and got USPS to ship it.

About 7 days.

Just got my white ultra capsule today too for the CDMA version. As stated the fit isn't very good around the top but it is a beautiful case. I was wondering if anyone has tried any modification to the top section to make it fit better?

Anyone willing to trade their white case for a brand new matte black barely there case,I have the GSM version and it doesn't fit mine.
Sent from my Galaxy Nexus

Shenit Bumper Case Review (LG Bumper Clone)

There have been a few threads linking to the Shenit TPU Bumper Case that have kinda died out because, well, it's no longer available on Amazon despite having been available long ago with a very future ship date. I ordered mine when the listing first went up on Amazon and it just arrived today! Here are my observations and judgments:
The Details
The case is made from two materials: TPU and a hard plastic. You can see the two materials in the photos on Amazon. It's done in a way that is still incredibly low-profile. The TPU covers all buttons, corners/edges, and ports (not the camera lens nor camera light, though). The hard plastic covers the back, the back corners, and some of the sides. The hard plastic is a *perfect fit* over the camera lens ring - from the back of the phone it is 100% impossible to tell the color of my phone.
Something that can be very clearly seen in the photos, and is the same with the official bumper, are the angles at which the sides have. This causes the feeling that the back edges of the phone "stick out". This seems to be a love-it or hate-it thing for most people. I'm torn about whether I like it or not - it definitely seems different than what I'm used to. That said, this was by no means a surprise for me and I expected it to be just like this. So in my Pro/Con list, this is what I'm talking about with the "back corners sticking out".
Oh, and it came with a piece of red velcro for some reason!
The Good
Overall, it's a very nice and snug fit on the phone yet it's not terribly difficult (also not terribly easy, in a good way) to get it off of the phone. With this case on the phone, I'm certainly not concerned with the phone slipping out whether pulling the phone out of a purse with something tugging on the case nor with skinny jean pockets or anything else. The feel of it is a mix of a TPU feel and a "soft" feel for hard plastic (think the feel of the back of the black version of the Nexus 5 to mean what I mean "soft" for hard plastic, not Quicksand case "soft"). Nobody will have problems with this slipping in and out of their pockets nor is it incredibly slippery either.
For protection, this provides the protection you would hope from a TPU case and not much more. As you can see in the photos, every corner and edge is covered by TPU including the four corners on both the front and back as well as the edges along both the front and back of the phone. The back of the phone, however is only covered with the hard plastic. Take a look at the photos and you can tell where the TPU ends on the insides of the case and where the hard plastic begins on the outsides of the case. This case might protect your phone from a drop and it might not - just like with all TPU cases. If you buy this and you play first-person shooter games where you can change your armor out, this case could be thought of as light armor or perhaps medium armor but no where near heavy armor.
It is definitely an attractive (and Nexus branded!) case that doesn't look like what many of the other $14 cases out there look like. As you can see from the photos, the case is molded perfectly to fit with the camera ring cutout. Speaking of the camera ring, the case is just a tad thicker on the back side than your camera ring so if you lay it down on the back, your camera ring is no longer a protrusion. This may have some implications for those of you with magnetic accessories for the camera ring but I can't really comment much on that. Ultimately, unless you look at the port cutouts or see my white speaker on the front, this case makes it impossible to tell the color of my phone - that's how perfect the molding is for the fit. The ONLY flaw I could find with the case's fit was for the microphone on the top of the phone. The microphone isn't perfectly centered in the hole but it's also not covered either.
The Bad
There are three primary problems I have with the case.
First of all, a quick browsing at the time I wrote this turned up quite unfruitful in actually identifying where you can even buy this case today! It is now listed as unavailable on all of the Amazon postings and even all of the eBay cases that look just like the OEM bumper case have seemed to vanish. I'm curious if you can even buy this case anymore as I couldn't find it anywhere now!
So here's the first knock on the case: The buttons have a mushy feel with terrible feedback on the power/volume buttons. We all know that cases tend to be Good, Meh, or Bad here and this case definitely qualifies as bad. Sorry!
And the last thing:The USB Port cutout, while appearing quite large, is unfortunately too small for a variety of USB cables. The first 3 USB cables I randomly grabbed didn't fit comfortable in the space provided although the fourth one did. So you'll have to find a cable that will fit in there if you ever need one and don't use Qi for all of your charging needs.
Pros:
Nexus Branded!
Plenty of color options and cheap (it was $14 shipped from Amazon)
Great snug fit with perfect molding to the phone
Feels like you hope it would feel from the photos
Very low profile - better than your typical TPU case (except for the back corners sticking out)
Plenty of room around the 3.5mm audio port.
Won't affect NFC, Qi, or radios
Cons:
Hard to buy (no longer on Amazon and the eBay lookalikes are no longer listed either)
Took a month to ship
Bad button tactile feedback
Many USB cables won't fit in the cutout for the USB port
I hope you enjoy!!

Sent from my Nexus 5 using Tapatalk

I just got mine today too. I got the blue one. Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case. But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Sent from my Nexus 5 using Tapatalk

Just added the more thorough review and several photos. Hope you guys enjoy! Feel free to ask any questions you might have!
guapinoy said:
Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. <<snip>> But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Click to expand...
Click to collapse
Yup, I commented on this in my more thorough review. It's different than I'm used to but exactly what I expected from the photos on Amazon (and Google's OEM listings/reviews as well). I still don't know if I like it or not. Like you said, it's weird.
guapinoy said:
Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case.
Click to expand...
Click to collapse
If I compared this to the worst TPU case I've ever had (and I've had some bad ones) that was rated as a 1 from 1-10, then I'd give this case a 2. You're right, there is worse. But not much worse - it's pretty bad. Maybe your blue one has slightly different buttons than mine but mine is pretty bad.
For the white around my camera on the back, I can't see any white whatsoever. At least I don't think I can even as I'm trying to look for it although I guess it's possible that the white + shadow makes it blend in with my light gray case. I don't see it, though.

Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).

Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
That looks like the same case but is definitely different packaging than what I received. Thanks for the link though, I was unable to find those on eBay when I tried yesterday.

Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
Uhh have you seen what most people have been saying about the official bumper? It's a low quality POS for the most part. Not worth full price, and even at $26 it isn't worth it with the peeling, staining, etc. Doesn't matter if it's from the play store. The unofficial ones might even hold up better, who knows, but the standard Google set with the official bumper case isn't exactly high. Besides, there's extra colors with the unofficial ones that some people might enjoy.
Anyway, if anyone still wants these ones I did find a link for super cheap. Of course it will probably take 3 weeks to a month to get to you, which is the case for most things shipping from overseas. But $12.99 shipped should make up for it. The Nexus logo is printed in a different color than the case on some of the color choices (just scroll down on the page to see).
http://www.aliexpress.com/item/For-LG-Google-Nexus-5-bumper-case-FREE-SHIPPING-front-screen-protectors/1612944308.html

God, it can't be any worse than the official bumper. I wish we had a better selection of actual bumper cases.

I'm using the Gray bumper clone for couple days. No staining (yet) , nice soft touch. Back panel is a bit bigger than front (as mentioned in 1st post).
I also have glass protector from Nillkin on, the case doesn't seem to push the glass.
Update: Now it has some blue from my jeans. sigh..

I may certainly be wrong but I'm beginning to think these unofficial cases are the same as the official ones, same manufacturing line and everything.
Sent from my XT1053 using Tapatalk