Which security theft application - Touch HD Themes and Apps

Dear members,
can anybody please tell me a security application working on HD? I tried the following, but they either worked only partially or the didn't work at all.
- Ultimate theft alert 3.5
- Where is my phone WIMP
- Don't steel my phone DSMP
- Phone Creeper 0.8
- Sprite Terminator
Can anybody confirm any of these programms working? I'm using a blackstone device with WM 6.5
The application should at least provide the following functuailities:
- silent SMS, if sim card is changed
- possibility to initiate silent callback via SMS
- possibility to get GPS coordinates by SMS
Help / information appreciated. Thanks in advance!
Bye, Tom

solved
I found a application working on Touch HD running WM 6.5. It is called Remote Tracker.
http://remotetracker.sourceforge.net/
It runs nicely, but remember to use the rt2 command if you installed WM 6.5

Related

Bluetooth Explorer creates PROBLEMS for TomTom!!!

Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX
On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.
I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?
Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.
herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02
perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx
Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com
SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.
Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.
so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com
Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot
ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.
Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...
Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks
try to check \windows\startup
I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers
u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,
I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?

MS Voice Command 1.6

Hi guys,
First of all - I'm very glad to be here. On the last few days I red a couple of threads (a very lot of) but now I would like to ask two questions...
1.)
When I install MS Voice Command 1.6 (German Version) with AX3L_WM6_WWE_v2.0.8.1 Image, all is the voice stuff recognition stuff is working, but the announcments of incoming calls und mails are not. For sure I have activated this feature in settings dialog. There was a post around in this forum about the replacing of files (I did - but doesn't work)
By the way I have the newsest version of Voice Command but still not working. (is is a global wm6 issue with this product or only image related?)
2.)
Sometimes if I try to turn bluetooth on it doesn't... only after a warm reboot Bluetooth works. I know this problem from my old HP hx4700. Is this only a specific Image problem, or is this normal on today's images?
EDIT: Of course I red also the threads about this specific problem.. but before testing all cooked roms - is it in gerneral a problem with bluetooth turning on?
Thanks,
kind regards,
Pinocchios
sorry for my bad english - I'm austrian
I am having the same problem trying to get WM6 and VC 1.6 to announce incoming call.
Bluetooth and GPRS issue solved
Hi there,
My problem (described above) is solved now. I read an article about a memory leak in SPB Mobile Shell.. And yes, when I turn off the TODAY plugin (program starter, weather preview) I can turn on Bluetooth when a celular data connection is established.
It's reproduceable.. the today plugin consumes too much memory.
(the now screen turned on from mobile shell will function as usual)
I am not able to install MS Voice command 1.6. It gives an error during the installation concerning the certificates etc... The install is then terminated. What should I do?
Thanks
I still can't get voice command 1.6 to announce incoming call on any trinity wm6 rom. not on the bluetooth headset and not on the device speaker. did you succeed?
No - I can't get it working.
seems as microsoft have to develop this product for wm6
Hi there,
I have the v1.6.17919 on the earlys Ger WM6 bepe rom in use and I'am surprice to tell you that the incomming calls where brought to me over the internal speaker!!!! Thats a cool feature, to here the name of the person that is calling!!!
Lalle
Hi
really?? I have tried bepe's newest rom, but there's an issue with active sync.. the exchange server sync get stuck and after an reboot of the mobile device, windows doesn't continue to boot - I just see windows mobile screen.
.. with other images is no problem..
.. another question... VOIP is working in bepe's rom?
on AX3L I can't get it working. there is only noise coming from the internal speaker.
regards,
Pinocchios
I installed MS Voice Command for a little while on WM6 (official release) but I found it to be pretty useless, don't know if it was because it was WM6 as I haven't used MS Voice Command on WM5. Anyway, switched back to Cyberon Voice Commander for the mean time, maybe when microsoft release a new version I will look at trying it again.

Using a TomTom x20 with WM6 (DUN Enabled)

Thanks to this excellent forum I have managed to improve my Orbit / HTC 3300 and
Upgrade to WM6 (using O2's ROM image)
Enable/Install Dial Up Networking through Bluetooth
What I would like to do now is fully connect to my shiny new TomTom 720. I can get the Handsfree and Wireless data working, but it won't recognise my SMS inbox nor allow me to access the messages.
TomTom has hopeless documentation and M$ aren't much better.
Is it possible?
How can I do it?
I'm sure someone out there can help (and I'd be very grateful!)
Cheers,
Neil

WM6.0 SIP client configuration - Not working

WM6.0 SIP client configuration - Not working
--------------------------------------------------------------------------------
Hi all,
I have followed the procedure in
http://forum.xda-developers.com/showthread.php?t=299950 and now i get Internet calling enabled in my device. However i could not make call. I am using the ondo SIP server for testing, no real service provider. I have tried many times and am not successful in getting it work.
However my doubt now is can the SIP client be configured in any of the three WM6.0 Operating system. It has 3 flavours :
1. WM6.0 Classic
2. WM6.0 Professional
3. WM6.0 Standard.
Can the SIP client be unlocked and worked from all the three or any specific flavour only ?
I think those who have made it work can provide insights into it. This is quite important for me. As till now i have been testing with WM6.0 professional. We intend to buy a WM6.0 device, so which flavour should we opt for ?
Hoping to get an earliest positive response.
im goin to be honest:
1. WM6.0 CLassic --> It works, but speakerphone sound (no earpiece)
2. WM6.0 Proff--> Same as classic
3. WM6.0 Standard--> Works bcoz says Internet Calling not available but when I configure a working server, it freezes my device at startup, so I have to hardreset it
Clear voice, Good responsiveness. So WM6.0 VoIP is quite good
I am using a LAN setup . Server used in Ondo server. But then my SIP client does not get registered with the server. Is it possible to try making calls using direct IP without any servers involved ?
kk2202,
Are you using any firewall at the SIP Server's machine?
I think you need to open SIP port (UDP 5060) at the firewall or disable it.
I'm using Ondo server (aka Brekeke SIP Server) without any problem.
Hi, did you make a _setup.xml with your settings and manage to install it?
If not make sure your phone is application unlocked and then follow the instructions again.
I'm successful on WM 6.1 Standard
You might also check for the Prov0Settings file and attach your xml here for verification.
My NAT creates problems for my Sipura 2100 box, but my softphones including the WM6.1 client gets through it without problems. For this reason I don't think your issues are NAT related. You might see the searching state, however when the IP phone icon appears in the top bar you should be good to go.
I might also add that if you suspect NAT issues you could try Fring www.fring.com/cab it is really easy to setup. If that works then it's clearly a configuration issue.
Hi,
I have attached the _setup.xml for verification. 192.168.0.101 is the machine where the ondo SIP server is running.
What should i check in Prov0Settings in this file. It gets created when i install my .cab file.
Fring is not working on WM6
Hey guys,
Im new to the XDA developer site, recently i have upgraded my Imate Jas Jam from WM5(Telestra) to WM6(3 Network) using "HERM_DOPODASIA_WWE_3.54.707.3_6275_CustomRUU" I have downloaded fring from www.fring.com/cab
Installation is successful, but when i start Fring it simplay shows up the screen which says fring is loading then close application, tried too many times could'nt make this to work, any ideas...
your help is appreciated

Gps Cycle Computer

Hello Artemis/Orbit/P3300 dudes
Does anyone have GpsCycleComputer QVGA V2.39 working on their device.
I have the QVGA version 2.39 which has a new DLL for directly addressing the GPS port which can be selected instead of the winmo driver.
The winmo version works fine on the Orbit but the direct access driver doesn't and hangs the app needing a soft reset to clear it from memory.
I'm just wondering if anyone else can duplicate the bug so that I can report to the developer to assist him?
EDIT: KobiP has reported the same bug on another Artemis, use the WinMo driver for now I think.
Thanks
Kim

Categories

Resources