Related
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
aE3-ink said:
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Click to expand...
Click to collapse
Thanks for your advices.
When I bought that phone seller didn't mention that this phone belongs to some operator. So is it possible to get information to witch operator it belongs (phone doesn't have any operator brands on his self, and isn't any special application or images in it).
And one more time... is it realy possible that phone belongs to operator... because like I wrote before that i can download and install earlier ROM from official web site, but problem is only with the latest ROM.
Perhaps the download doesn't work as many people had problems installing the latest rom ? It would reboot into the bootscreen & block.
Maybe they have the download until they know why it screws up (but works perfect via an internal flash).
Dunno though, as it's weird you getting the 'operater' message.
Anyway, you can get the latest official rom in here, so you'll be able to flash your device.
Here's the thread : http://forum.xda-developers.com/showthread.php?t=471699
Just flash it from the internal storage. Works fine. Extract the setup with winrar or something, then you will see 2 files - one approx 140Mb, the other one like 2Mb. Rename the big one to Diamimg.nbh and copy it to your internal storage.
* Soft Reset + Hold volume down button + back button <----
* Follow instructions on screen
vladasklp said:
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
Click to expand...
Click to collapse
Read here where it says "stops at 5% or invalid model id:
http://forum.xda-developers.com/showthread.php?t=409425
Next think about HardSPL.
1.93.479.3 if you had this rom in your device, and you tried to download from HTC Support site and get the "This is rom isnt for your device" you get this because there are NO 2.03.479.3 rom the BOLD tells you what region rom u are using. And If you download another rom and try to flash and get "invalid vendor" you MUST hard-spl your device, after that you can flash every rom you can find an example of region rom, I have put this at least 4 times now so people try o understand what i meen when speaking of region roms.
RUU_Diamond_HTC_DAN_2.03.403.2_
RUU_Diamond_HTC_SPA_2.03.412.1_
RUU_Diamond_HTC_FRA_2.03.406.2_
RUU_Diamond_HTC_GER_2.03.407.2_
RUU_Diamond_HTC_WWE-ME_1.93.456.2_
RUU_Diamond_HTC_Europe_2.03.401.2_
Thanks everyone for advices!
First i tried Kevbodian recommended method. Downloaded OliPro's NBH Util and tried rebuild NBH file, but program generates only empty file (0Kb - size), maybe it doesn't work in Windows 7 So I'm fail.
Then tried laser21 method and succeed! I downloaded Unsigned-Hard-SPL-Diamond-OliNex.zip (http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2), installed them, and made everything step by step like he wrote.
Phone works seams fine, but maybe a little bit slower , so I'm tried reinstall ROM one more time, but do that in standard way. Just downloaded _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship (http://forum.xda-developers.com/showthread.php?t=471699) and ran it. Everything was fine (installation pass 100%) but than it shows - ERROR [270] - UPDATE ERROR, phone also restarted and shows information in red/green/blue/white background.
In red space
Code:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
In green space
Code:
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Place try again
So one more time I made like laser21 recommended - and phone works again. But can I do something more that latter update i can do in standard way ?
I'm not sure what you mean by:
But can I do something more that latter update i can do in standard way ?
Click to expand...
Click to collapse
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
I did everything like you (and laser21) wrote. But now i have problem when updating ROM in standart way - downloading official ROM exe file, and ran it (like I wrote before, after 100% proceed it display error that update unsucceed)
So why now I can't update ROM in standard way, maybe is solution to fix that problem ?
Sorry for mistakes in post
Try one more time with out any changes
omaga said:
Try one more time with out any changes
Click to expand...
Click to collapse
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
vladasklp said:
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
Click to expand...
Click to collapse
error 270 has happened before. try searching. I know I am an old hag, but this may be the best help I can give:
in google search for: "error [270] - update error"
include the "" marks.
help me
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
if you have a question
love_mido said:
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
Click to expand...
Click to collapse
please ask it only once....not 3 times in other threads...this is not allowed.
i have deleted them. read the rules before you post again.
thank you
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
This post is exactly what i needed to upgrade using the internal (memory) route.
touch diamond p3700 error
help me!!
My previous users of htc touch diamond p3700 s / n HT827GN42467 through my htc official site upgrade romnya WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, the program does not run again .....
solution please ....
help me please ....
My previous users of htc touch diamond p3700 s / n HT827GN42467 through the official website of my htc rom upgrade its WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, does not show the logo and the windows mobile does not work anymore at all also can not connect to pc ..... how can I fix that right again, the solution please ....
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
try doing a hard reset not just a soft reset that might help
medo_punsher said:
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
Click to expand...
Click to collapse
if u have loaded hardspl then hold power button + OK button on sides of phone and then stick stylus into reset button an dthis should get u 2 red, green, white, blue colour screen and then plug usb in and re-flash
get hermes in bootloader mode, connect USB cable and flash with this http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
Activesync doesn't need to be runing.
download mtty and do like he said here "http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen" (copy all text between " " and paste to your browser).
After "set 14" give "task 8"
Try flashing from SD card, first the HardSpl ant then the Original Stripped ROM.
@TheMim : tried but didnt work
@eryunt : how ?? i have a custom rom with the name HERMIMG.nbh on my sd card but it doesnt upgrade it says loading for a few seconds then some red numbers and letters appear at the top of the screen then it goes into the bootloader and doesnt upgrade
NOTE THAT : i dont have hard spl (no supercid)
Thnx again , plz help
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
Hope it fixes your Tytn
Many thanks for your help , i will try that tomorrow but one final question ,
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
medo_punsher said:
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
Click to expand...
Click to collapse
Yes, you need an SD-Reader for your PC
Okay , now i have a cooked rom on my sd card (fat32 formatted) named HERMIMG.nbh when i get into bootloader it says loading for a few second then a red number "00068002" appears at the top of the screen and it continues to the tri-colour bootloader
any help ??
Have You already installed HARDSpl correctly via SD-card?
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
medo_punsher said:
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
Click to expand...
Click to collapse
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
JUST FOLLOW ALL THE STEPS ABOVE
No no no no..... HSPL cant be upgraded now via SD card cause th SSPL was unsuccesfull!!!!!.....
Get a XP PC... your batt must be 50% charged or more "better", a working USB cable
NO SD CARD inserted... your XP pc must have NET frameworks 3.5
put your device in bootloader mode.... and upgrade any stock rom to rewrite a valid SPL cause your is corrupted now
then when you get a stock rom working via SSPL you will be able to redo the steps to flash HSPL V7
hi boss i have problem with my ARTEMIS after unlocking it the screen goes black and goes off i need help to solve this problem pls thanx in advance
artemis help
i m new to this site i just flashed my p3300 with bad cooked rom now it close. it wont boot it stuck in boot screen and one of the main thing is there is no OS .... symbol on bootscreen only showing IPL SPL GSM when i press and hold record and power + reset it wont go to bootloader how can i enter in to boot loader plzzz hel me ,
im awaiting for any one reply
if someone help that greatfull for me
plz help me
...
robinzen said:
i m new to this site i just flashed my p3300 with bad cooked rom now it close. it wont boot it stuck in boot screen and one of the main thing is there is no OS .... symbol on bootscreen only showing IPL SPL GSM when i press and hold record and power + reset it wont go to bootloader how can i enter in to boot loader plzzz hel me ,
im awaiting for any one reply
if someone help that greatfull for me
plz help me
Click to expand...
Click to collapse
* if you have an SD card in the device, take it out..
* put these two .cab files on your device and run them..
- Cert_SPCS
- EnableRapi
* get activesync connection to pc..
* start_uspl.. (runs a dos window on pc)
* screen on phone goes blank.. or penguin picture..
* only when the rom update utility window opens on pc, soft reset when its 100%..
(to get new activesync connection)
* continue to run rom update utility..
***ONLY after doing uspl is it safe to flash a rom..
when you have done uspl on your device startup you will see..
SPL: 1.11.cmon
* its done.
now flash any rom to your device..
USPL 1.11.CMON here.........
http://forum.xda-developers.com/attachment.php?attachmentid=41246&d=1181558635
***you have bricked your device so read carefully...
you MUST flash you device with the official rom before uspl..
you can find your official rom here...
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
flash with official rom and message back wen you have done it --- only the official rom will work on a bricked device.. --- for now..
message me if you get stuck dude
Hi all,
I tried to flash new rom and the usb connection was broken while flashing.
Now my TP2 can not boot anymore.
I tried to hard-reset, but it did not work, can someone help me ?
I got this while booting:
RUNNBH
RHOD100 32MB SS-BC
SPL-0.85.OliNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
511U536 708ROM2code error
802, 19D122 Please try again
216,846 Calibrated
(PLEASE SEE ATTACHED PICTURE - My error is SPL-0.85.Olinex instead of 000 in this picture)
hold your vol down button while reseting your device, then you should get to the bootloader and from there you can use task29 and then reflash your rom
Muhownage said:
hold your vol down button while reseting your device, then you should get to the bootloader and from there you can use task29 and then reflash your rom
Click to expand...
Click to collapse
Thanks God... and thank you... It seems working... will update the result soon.
WORKED !!! GOOD GOOD !!!
Thank you very much...
Stay in touch if you want...
Yahoo ID: nguyenngochieuthuan
Skype: nnhthuan
Google talk: [email protected]
Just would like to share after searching on xda-dev
i think the error says
"Upgrade ROM code error
Please try again "
try this and see if it works.
1. Download orginal rom from HTC.com
2. Remove HTC Battery
3. Remove SD-Card
3. Connect the Phone to USB-Computer
4. Start-up the phone in the Tree-color screen
5. If everything is right, in the bottom you will see USB
6. Start-up the update on your computer (rom you've downloaded from htc.com)
7. Run the Update
8. Your phone will boot after it succesfull install
9. Place the battery and SD-Cart back in the Phone
Enter BOOTLOADER mode
Hi,
A video how to enter the bootloader mode: HERE
Makes perfect sense to me. If you broke the USB connection, it didn't finish flashing the ROM. So it has nothing to boot. Same thing if you hard reset, there is nothing to hard reset too, if the ROM is messed up. But as long as you can get into bootloader, you can flash the ROM and recover.
bigchrizzieboy said:
Hi,
A video how to enter the bootloader mode: HERE
Click to expand...
Click to collapse
Thanks for your video. It's useful.
can't do anything from bootloader screen
I have been flashing ROMs for years, so not a total noob. For some reason, after running task29, rhodium won't connect to pc via activesync. I can enter bootloader and it says 'usb', however. I tried flashing ROM from SD card, but stays stuck in bootloader screen and goes nowhere. Please help?
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
flashing
did you changed port number to 41 ? sorry if you did.
Edit: Run all programs as Administrator if you are on windows !
درورد بر برادر شیرازی
هماهنگ کن یه سر بیا مغازه ببینیم چیکارش میشه کرد
ضمن اینکه هزار تا تالار رفتی ولی یه سر به
تالار اندروید ایران
هم نزدی !
MOD EDIT - Translation added (seems a bit off)
Drvrd brother Shirazi
Come shop to see Chykarsh 's now a head coordinator
While thousands were leaving the hall , but a head
Android Forums Iran
Is near !
scamex said:
did you changed port number to 41 ? sorry if you did.
Edit: Run all programs as Administrator if you are on windows !
Click to expand...
Click to collapse
yes ... my problem is with the phone .. i guess one partition must be written in first place to get the other work and writeable .. but i tried all solution and still the phone give me no answer ... all i have tried to write even one partition failed .... any other ideas ???
mastershex said:
salam bar to ey hamshahri
dadash man khodam tahe LG kara hastam ... lg khamush hanuz az zire dastam birun narafte .... inam az save vasam umade .. teh rafte ... yazd rafte .. shirazam dase kolofta gashte alan reside dastam mikham kar be taviz hard nakeshe ... yani kari nis k nakarde basham rosh pasazh soti tasvir das doktor ham boode nashode ..... dg mundam chikaresh konam ... age rahnamaee ya file dari mamnon misham
Click to expand...
Click to collapse
ok , dar har soorat
dr ham ehtemalan vaght nadashte vagarna injoor mavaredo ghablan too g2 hal kardim
agar khasti ye sar biar checkesh konim
do you have sdcard inserted in the phone ? or maybe you are mistypping partition name .... sorry for my english.
in linux that error is based on fstrim error, wich means that the memory hardware is corrupted.
If you want you can jtag that phone via Octopus box.
scamex said:
do you have sdcard inserted in the phone ? or maybe you are mistypping partition name .... sorry for my english.
in linux that error is based on fstrim error, wich means that the memory hardware is corrupted.
If you want you can jtag that phone via Octopus box.
Click to expand...
Click to collapse
in this case that solution does not work i tried but no success ... im 100% sure of the spelling of what im typing .... any other idea ???
mastershex said:
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
Click to expand...
Click to collapse
Just stop using your phone and keep it dead for a week. It will get back to normal.
LG G3 Fastboot
i am having the exact same problem with my lg g3, and i cant find the solution anywhere on the internet. If you solved your problem please kindly share the procedure.....
Same problem here
Any news from the topicstarter? I have the same problem as well on my D855 that only fastboot is working.
I am not sure what happened but my phone just rebooted out of the blue and booted android as far as the lockscreen when it froze and rebooted again. After that only fastboot is showing up.
*Update: I brought my phone back to the store and it is fixed under warranty. I haven't received a report on the repair carried out so I only can guess what they have done and that is that they have replaced the mainboard (different IMEI now). Good news is that it works like it should. It's shipped to me running Lollipop so I will downgrade to Kitkat but that's just my personal preference.
I have the same problem with D855, is it dead mmc? any suggestions, anyone knows something?
Same problem here. Anyone can help finding a solution for this?
soltution for no download mode, stcuk in fastboot mode, stuck lg logo, qhsusb bulk mo
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
i have got this prob with my lg g3 d855 32gb model. phone is not responding to anything . it neither goes into download mode nor the recovery mode it has got complete dead idk why. please help out if u can solve this through team viewer ?
masrooraly said:
i have got this prob with my lg g3 d855 32gb model. phone is not responding to anything . it neither goes into download mode nor the recovery mode it has got complete dead idk why. please help out if u can solve this through team viewer ?
Click to expand...
Click to collapse
Send me ur team vuewer id and pass
Trying to respawn the post, becouse i have the same proble with my phone. I want to know if someone find a solution for it. Thanks
Same problem here..
mastershex said:
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
Click to expand...
Click to collapse
Same Problem here.. Any luck ?