hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
try to change rom or hard-spl...maybe is rom related
if nothing works i think you have to format your internal memory to do this soft reset then press volume down and the central button of the d-pad and press down..
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
veli4ko said:
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
Click to expand...
Click to collapse
maybe...if changing it doesn't help i think you have bricked your phone...and there is only a solution...bring it back to htc
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
veli4ko said:
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
Click to expand...
Click to collapse
i was meaning bring it back to the service...
veli4ko said:
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
Click to expand...
Click to collapse
Hy veli4ko here is HardSpl
To veli4ko
here is a Stok HardSpl
To veli4ko
1. Solution :
- On smartphone: press volume down and reset simultaneously to get the boot mode. Once you made that follows the instructions on the screen.
2. Solution :
- Possibly you do not succeed the first step to obtain a version of HardSPL Diamond, copy the file there. ROMUpdateUtility.exe nbh and running the phone connected to PC and a loader.
Good luck and more attention next time !
thanks
DjMaryuslive but that won't solve the problem... when i put it in boot mode i saw that i were with hardspl 1.93 and the i swich with stockSPLs_htchackerssign.zip in the ROMUpdateUtility.exe
and then i make hard reset but problem is still there... i don't know what to do... any more ideas
Related
I'm in serious need of help - i tried to upgrade my sx56 to the 4.00.05 with voice command and now i can't get the back light on, i've got no phone and i can't even get the usb connection to notice the unit.
HELP - what do i do to fix this problem
thanks :shock:
Can you get to the bootloader? If it was only the operating system that you flashed you should be able to recover it. You will need an sd/mmc card, a card reader/writer and xdatools. All the info is here on the forum. You can download a rom from www.yorch.net and choose at the bottom of screen "sd card flashing".
forgive my ignorance but where would i find the bootloader and i unfortunately don't have a sd card as yet - i've been looking into that guess i'll be gettng one pretty soon
may i assume that this will resolve the issue that my usb connection is not even recognizing that my unit exists
thanks
robin
hey cruisin-thru, i have just purchased a 256 card - will i be able to resolve this problem or am i totally screwed
thanks
:shock:
Hi ...
since ur gonna flash ur XDA with SD i may advice you to get a newer ROM than 4.00.05. i recommend either TMO 4.01.00 or A30.09. both you can get cooked at Stefan kitchen at lumpistefan.dyndns.net
once you cook the ROM as .nbf file and download it, u will need SD reader/writer for ur PC. move the file to the SD card and insert it into ur XDA. if it asks u to format it just press NO.
goto the bootloader by pressing and holding the power button while soft reset. it should recognize the card content and ask u to press the action key .... enjoy ur new ROM!
note: if u still want the 4.00.05 ROM, use winzip or winrar to open the exe file and extract the .nbf file and follow the above steps.
good luck ...
thank you for your assistance - i've just purchased the card reader/writer and am about to transfer the .nbf file over
you indidated going to the 4.01.00, can you tell me what difference there is between the different roms
thanks again for all your help
robin
Hi ...
Mainly the diferences are bugs that are fixed in old versions like some issue with the back light, SD card erasing, self rebooting ... etc.
A30.09 is perfect except it has an annoying sound issue and has no extras at all ... that's why I prefer TMO 4.01.00
BTW, I noticed that I just misspelled the kitchen address ... it's http://lumpistefan.dyndns.org/
I have searched the forum,but my problem is a little weired,after upgrading my madio and ce rom image load properly but my extension rom does not,ie the autorun gives me a msg saying "customize in 3 sec" but after that nothing happens,tried a hard reset and reflashing(also from the sd card ) but no luck Could anyone pl help me out in this??
You need to go to wiki and read about the ext rom in the kitchen.
Here you will get a better understanding of what it does, how it works, be able to open it and be able to see if you have anything in it.
Try that first then come back with a tad more info.
Hey please help me im flashing my hermes from an sd card an till now it has more than 30 minutes hang... i dont know whats happening im scared!! i think i could brick my device like this ! mm hellpp!!!
no brick
don't worry nothing happened... in worst situations reset your device, read the instructions provided on the wiki pages on how to flash from SD card, and retry again... and if it doesn't want to work, find a computer and flash it using activesync
Just out of curiousity, which ROM are you flashing?
MRH 5.0.0..... well i finally flash it with my computer but dont know why it didnt work i tried several times and waited up to 20 min and the bar didnt move
Did you Hard Spl your Hermes first?
Did you rename .nbh file to "hermimg.nbh"?
These are a must to flash from sd card.... Cheers...
hey guys,
i've problems to update my pocket pc to mobile 6. I tried both methods no one works for me.
First i tried to connect my pocket to my pc and started windows mobile center. Downloaded all the files, but always when i start the update, my pocket goes to the boot screen with the red, freen and blue stripes and the connection disconnects. And i get the message 260 update problems and my pocket stays at the boot screen. Than i tried the same with Windows XP and ActiveSync, the same problem again.
After that, i tried to update with a micro SD card 2GB. I downloaded the "Hard-SPL-V7"-File and saved it to the micro SD. Rebooted the Pocket, but nothing happend, the pocket stayed in the boot screen. Than i renamed RUU_signed.nbh in HERMIMG.nbh and tried it again, nothing happens.
Can somebody help me please? I want to use mobile 6, because i want to use a 8GB Micro SD.
EDIT: THANKS A LOT, but now i have a new Problem i described it in post #6 in this thread. Thank u 4 helping me.
EDIT II: Thank u all, i fixed it by myself. Finally the upgrade worked with XP and ActiveSync. The best thanks to ultramag69 again, he solved my problem.
If you are using vista you need to install this, removing all older versions
Do you have the newest .net framework on your computer from here?
You wont be able to flash via SD without HardSPL, so you need todo it via activesync.
Try another USB port.
Try flashing the shipped from for your device, you can get your newest WM6 rom from here.
If that fails, tell us:
Whats your device (theres loads of different models of the Hermes)
Have you flashed anything before?
What rom is on your device atm?
What SPL do you have atm? (Hard or not)
Also check your serial number against this list for known problems.
There are certain steps needed to be taken. First is making sure your computer has the .net compact framework. Get it here.
Only then can you run hard spl from your computer.
Also, when you put on a .nbh file onto the microsd and rename it, you need to go into bootloader not reboot. You need to hold the power button and ok button while pressing the reset button with stylus...
I have got the same problem....
Using XP not able to flash neither via Active sync nor by SD card...
Stck at MRH 8.4...
Go to post 1160 on page 116 of this thread to flash Hard SPL using the sd card method - http://forum.xda-developers.com/showthread.php?t=296722
You can't flash using the sd card method without Hard SPL. To flash Hard SPl on you need to do an extra step - flash with soft SPL.
To flash the os just leave out steps 5 & 6 from the above post after you have Hard SPL installed...
Cheers...
Thank you guys for helping me,
A big thank to ultramag69, your post solved my problems. It worked great.
But now i have a new problem. I upgrated the SPL to HardSPL v7 (opipro 2.10). With the help from ultramag69 it worked perfect. Sooner i did the radio update with Micro SD - worked perfect too.
So finally i tried to update the ROM, downloaded the german ROM version from this Thread copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and did a reboot (ok, start and reset buttons) like i did it before. But it shows me at the screen only HERMIMG.nbh and BOOTLADER. When i start the update it runs 2 seconds and i get the message HERMIMG.nbh - OK BOOTLOADER - OK UPDATE COMPLETE. But it doesnt start the WM6 Update. Why not? Can someone help me again please?
I think the only file that's supposed to be on the microsd is the hermimg file...
not sure if having other files there will effect it like that...
Rollswap said:
... copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and... But it doesnt start the WM6 Update. Why not? Can someone help me again please?
Click to expand...
Click to collapse
the only file that you have to copy to your SD card is RUU_Wrapper.nbh (size: about 90 MB) after naming it to HERMIMG.nbh
note that this will up-/downgrade your Radio to V1.47.00.10 so you can also check other available German Versions with other Radio versions on the Hermes Wiki
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
alex8525 said:
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
Click to expand...
Click to collapse
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
zocster said:
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
Click to expand...
Click to collapse
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
alex8525 said:
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
Click to expand...
Click to collapse
Ok so what is the status of your device now, have you flashed back to official shipped rom?
Please try these instructions. also here please view.
If the sd card is more than 2gb it won't be recognised by bootloader. The os (wm06+) is able to detect and read sdhc but the bootloader doesn't.
Did you format the sd card fat32. I know a few people who swear black and blue they did but when I reformatted it, it was registering as being fat.
Did you copy ONLY THE .NBH file to the sd card and rename it to hermimg.nbh? Won't be recognised if you didn't.
These are steps I tend to go through myself as 1 little thing overlooked can mean either nothing happens or disaster....
Cheers...
Hello all, best wishes for all of you.
I am new on this forum and read many stuff here allready. However i didn't find a real solution yet for my problem to get cab-files installed, f.e.:
I'd like to install Gyrator 2 on my HTC Touch HD (UK) (And other software)
When i try this i get this error:
"The file "gyrator" cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file".
The same message occures when i try to do this with other cab-files. GSen was going fine and even CabInstaller did. Net Compact Framework 3.5. installed and ROM version: 1.14.401.3
I copied the cab-files from PC to PPC by dragging it into the Storage Card.
I would really appreciate your help, because im goin' nuts!!!
Tia ....
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
BlackMonkey said:
Hello.
try this:
- make a soft reset and try again to install from the SD card
- make a soft reset, copy the .cab file with activesync to the phone memory (not on the SD card) and try again to install
when this also won´t work I´m afraid you will have to hard reset your phone..
Click to expand...
Click to collapse
Didn't work either ... A hard reset? Uhm .... Don't like that, i hope and will wait first for a solution ...
patterns said:
i had same problem
why dont you just use Gsen, same thing, works great! its definately here
Click to expand...
Click to collapse
As said it is not only Gyrator but it occures with more cab-files. The rotate is not my only goal, therefor i surely could use Gsen, but Gyrator 2 cn do much more. The same with other 3rd Party's ...
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Problem SOLVED!!
AllTheWay said:
Use Advanced Configuration to make sure that your security warning is disabled.
What .cabs are you trying to install?
Click to expand...
Click to collapse
Problem solved! The way i used CabInstaller was wrong. Instead of open the CaBinstaller first and then adding the cab-file and destination path, i double clicked on the cab-files first and then it won't work, because i gave CabInstaller permission to take over the control of installing cab-files
Thank you anyway for thinking with me ..
Great to hear you solved your problem!
<off-topic>Could you please change your subject in the initial post? subject is supposed to describe what the thread is about like "unable to install CAB files" or something like that...thanks<off-topic>