Related
Hi everybody,
I'm stuck trying to upgrade my TyTn to WWE WM6 (HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe).
After following all the steps of the upgrade wizard, the screen of the Tytn goes black and subsequently the ActiveSync connection is lost. After a while i then get the dreaded "ERROR [260]: CONNECTION".
I am running the original ROM (ROM 1.18.255.3) , and active sync 4.5 on Windows XP SP2. I downloaded the WM6 upgrade directly from HTC website after properly registering my device.
I even tried upgrading to SPL version is 2.10.olipro, but i still get the same behaviour.
[EDIT] Another thing i noticed is that when launching the upgrade executable, when it "veryfies informationj on my computer", if the TyTn is already connection via ActiveSync, it automatically resets into bootloader (4 colors window) and i am forced to perform a soft reset before re-trying the upgrade.
Could anybody help me out here?
Thx!
few people have seen this - no solution as yet.
Best workaround is to use the SD Card update method. No USB connection required.
todd_jg, could you please point me out to a procedure for upgrading to WM6 via SD card?
Thank you in advance.
dondobert
There is a description in the WIKI, just go HERE for instructions on how to flash from SD card.
Best wishes
I'm having the same exact problem....
I'll try the SD card method I guess. I'm suspecting it has something to do with how activesync recognizes my phone, because when I just sync normally it doesn't do it as well as previous phones, for example when I plug in the phone it wont auto recognize, I hafta manually start active sync on my computer before it starts.
this is because the usb port in the device is crap...it gets worn and then the cable gets lose....im having the same problem ,it is a nitemare...new usb cable sometime fixes the problem.i have tried 7 new cables the same happens. it gets so bad tha you will be unabled to charge the device,im afraid we got to send the device to htc for repair.
Still nothing...
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
@dondobert -
i assumed, you have already tried to uninstall and re-install ActiveSych 4.5 and recreate the synch profile.
OR
try this -
#1. on your phone device goto start-settings-connections-USB to PC
and set the tick mark to Enable advanced network.
#2. synch your device via ActiveSync
#3. do your upgrade OS or Radio
#4. once you are completed the install, undo #1.
Note 1: only do the above steps if you are having continously encountered the lost connectivity to ActiveSynch during the OS or Radio upgrade.
Note 2: your device must has either HardSPL Olipro method or SuperCID
The best way I have found to work around error 260 is
First disable Antivirus software
Next Go into Windows Firewall then exception tab, and search for "Windows Mobile-based Device Connectivity". Check it as an exception.
For the people who use Microsoft Live OneCare,
Go to "Change OneCare Settings" then go to the "Firewall" tab then click the "Firewall Connection Tool" . Make sure the Active Sync/Windows Mobile Device Center is checked on
Good luck
Let me know if this works
dondobert said:
Just tried for a few hours to perform the upgrade via SD card... but no way!
After reading various threads on the forum i think i tried every tweak and twist in order to have the upgrade via SD card method work (made sure the SD card is formatted as FAT32, not corrupted and with only the HERMING.nbh on it; tried also with SSPL-HERM.exe; etc.) but still no success at all.
Like other users i read of, after entering bootloader, my TyTn just sits there and the only way to proceed is to perform a soft reset.
Any idea?
Has anybody who has the USB upgrade problem been able to succesfully upgrade with the SD card method, or does there seem to be some kind of connection between the two failures?
Thx
Click to expand...
Click to collapse
I had this problem, and managed to upgrade with my SD card just fine. In fact, my upgrade died and the device was stuck on bootloader mode.
The SD upgrade method is so reliable I may just do it now for every upgrade.
@dondobert -
on your reply post #8, you have mispelled on the HERMING.nbh file name. it should be HERMIMG.nbh
please verify the file name on your SD card, and rerun the SD procedure.
I had the same 260-error. Fixed:
- Did a "Clear Storage" (factory settings)
- Did all the "settings up your new device"-stuff.
- Did new active sync to computer (vista)
- Flashed just fine from original exe. (And i do have olipro SPL)
I have problem and resolved
Hi I have a same problem but, i just try to upgrade with mobile in boot mode and appears the error, but when connect normally mobile to pc and start upgrade error dissapear, and upgrade full, schap's spanish and radio 1.50 try this method cheers
Had the same problem and got it working
You need to set you TyTn in bootloader (4 color screen) mode and then connect it to the computer. then start loading the WM6 and you should be fine. I had done it using Schaps wm6 and it worked fine...
good luck.
Hi there ...
I had the same Prob with error 260 ...
- After i disabled the "USB-TO-PC" extendet function
- Reboot the PC
- Soft Reset my Vario II
ist works, but i don't know why
I hope it will work on yout decive to ... CU No.Trace !!!
Successful!!!
Thank you all for the great support!
For all of those out there still struggling with the problem, for me it finally worked following hellomotto's suggestion.
Regarding otoro_315 remark: yes, my mispelling int he post, file name on SD card was indeed HERMIMG.nbh.
Thank you all again!
Cheers
Had exactly the same problem. Resorted to SD upgrade - went very smoothly (Official Cingular WM6). However, will keep these suggestions in mind for the future.
I think the SD upgrade probably also eliminates some possible points of failure. According to wiki instructions, SD must be erased except for the img file - takes a bit to transfer 2G to/from SD. Don't know if this is a must - but didn't want to take a chance. Might just buy a cheapie SD just for upgrades.
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
You mean the SD card was not erased and there were other files on it? (You don't say that explicitly).
I too was amazed at the speed - the wiki said it takes about 30 minutes - when it indicated complete in less than 10 min, I let it alone for about 15 min. because I thought it was going to do something else!
consul said:
One more for the SD card method. Extremely quick too ...I was really amazed that a 45MB ROM would flash in less than 5 minutes.
And it worked fine for me WITHOUT even formatting the SD Card first, I just pasted the extracted .nbh file to the root folder and loaded the SSPL file.
Click to expand...
Click to collapse
hey guys,
i've problems to update my pocket pc to mobile 6. I tried both methods no one works for me.
First i tried to connect my pocket to my pc and started windows mobile center. Downloaded all the files, but always when i start the update, my pocket goes to the boot screen with the red, freen and blue stripes and the connection disconnects. And i get the message 260 update problems and my pocket stays at the boot screen. Than i tried the same with Windows XP and ActiveSync, the same problem again.
After that, i tried to update with a micro SD card 2GB. I downloaded the "Hard-SPL-V7"-File and saved it to the micro SD. Rebooted the Pocket, but nothing happend, the pocket stayed in the boot screen. Than i renamed RUU_signed.nbh in HERMIMG.nbh and tried it again, nothing happens.
Can somebody help me please? I want to use mobile 6, because i want to use a 8GB Micro SD.
EDIT: THANKS A LOT, but now i have a new Problem i described it in post #6 in this thread. Thank u 4 helping me.
EDIT II: Thank u all, i fixed it by myself. Finally the upgrade worked with XP and ActiveSync. The best thanks to ultramag69 again, he solved my problem.
If you are using vista you need to install this, removing all older versions
Do you have the newest .net framework on your computer from here?
You wont be able to flash via SD without HardSPL, so you need todo it via activesync.
Try another USB port.
Try flashing the shipped from for your device, you can get your newest WM6 rom from here.
If that fails, tell us:
Whats your device (theres loads of different models of the Hermes)
Have you flashed anything before?
What rom is on your device atm?
What SPL do you have atm? (Hard or not)
Also check your serial number against this list for known problems.
There are certain steps needed to be taken. First is making sure your computer has the .net compact framework. Get it here.
Only then can you run hard spl from your computer.
Also, when you put on a .nbh file onto the microsd and rename it, you need to go into bootloader not reboot. You need to hold the power button and ok button while pressing the reset button with stylus...
I have got the same problem....
Using XP not able to flash neither via Active sync nor by SD card...
Stck at MRH 8.4...
Go to post 1160 on page 116 of this thread to flash Hard SPL using the sd card method - http://forum.xda-developers.com/showthread.php?t=296722
You can't flash using the sd card method without Hard SPL. To flash Hard SPl on you need to do an extra step - flash with soft SPL.
To flash the os just leave out steps 5 & 6 from the above post after you have Hard SPL installed...
Cheers...
Thank you guys for helping me,
A big thank to ultramag69, your post solved my problems. It worked great.
But now i have a new problem. I upgrated the SPL to HardSPL v7 (opipro 2.10). With the help from ultramag69 it worked perfect. Sooner i did the radio update with Micro SD - worked perfect too.
So finally i tried to update the ROM, downloaded the german ROM version from this Thread copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and did a reboot (ok, start and reset buttons) like i did it before. But it shows me at the screen only HERMIMG.nbh and BOOTLADER. When i start the update it runs 2 seconds and i get the message HERMIMG.nbh - OK BOOTLOADER - OK UPDATE COMPLETE. But it doesnt start the WM6 Update. Why not? Can someone help me again please?
I think the only file that's supposed to be on the microsd is the hermimg file...
not sure if having other files there will effect it like that...
Rollswap said:
... copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and... But it doesnt start the WM6 Update. Why not? Can someone help me again please?
Click to expand...
Click to collapse
the only file that you have to copy to your SD card is RUU_Wrapper.nbh (size: about 90 MB) after naming it to HERMIMG.nbh
note that this will up-/downgrade your Radio to V1.47.00.10 so you can also check other available German Versions with other Radio versions on the Hermes Wiki
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
alex8525 said:
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
Click to expand...
Click to collapse
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
zocster said:
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
Click to expand...
Click to collapse
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
alex8525 said:
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
Click to expand...
Click to collapse
Ok so what is the status of your device now, have you flashed back to official shipped rom?
Please try these instructions. also here please view.
If the sd card is more than 2gb it won't be recognised by bootloader. The os (wm06+) is able to detect and read sdhc but the bootloader doesn't.
Did you format the sd card fat32. I know a few people who swear black and blue they did but when I reformatted it, it was registering as being fat.
Did you copy ONLY THE .NBH file to the sd card and rename it to hermimg.nbh? Won't be recognised if you didn't.
These are steps I tend to go through myself as 1 little thing overlooked can mean either nothing happens or disaster....
Cheers...
HI, i recently change service from sprint to cricket, i have a htc sprint touch, i accidentaly broke one of the usb pins on my phone, i need to fully flash to cricket. is there any other way? already loaded the cricket prl only text and talk work, as i used my memory card to uploaded it. how can i unlock it so i can load a custom rom with a memory card?
can i use activesync with bluetooth to run the unlocker?
ive tried active sync with BT and didnt have much luck but if you can get it to connect you should be ok ( im just assuming here)
xcaliburpcs said:
HI, i recently change service from sprint to cricket, i have a htc sprint touch, i accidentaly broke one of the usb pins on my phone, i need to fully flash to cricket. is there any other way? already loaded the cricket prl only text and talk work, as i used my memory card to uploaded it. how can i unlock it so i can load a custom rom with a memory card?
can i use activesync with bluetooth to run the unlocker?
Click to expand...
Click to collapse
I don't think you can flash the ROM via bluetooth, but I could be wrong. One thing you can do is flash the ROM/unlocker directly from the memory card in the phone. From what I understand it needs to be a non-HD card (usually 2gb or less) and also needs to be formatted FAT32. Then you can download the 'imcokeman' unlocker, decompress it and pull out the *.nbh file. You will have to rename this to VOGUIMG.nbh and put it in the root folder of the card. Then when you activate the bootloader, by POWER>CAMERA>SOFT RESET it will load the NBH. Then you can also put a custom ROM on this way too...just pull the nbh file from what you get, and follow same procedures after the phone is unlocked. I've never done this before, but I have read where people have done it successfully. If you need more info reference this thread http://forum.ppcgeeks.com/showthread.php?t=20370&highlight=memory+card.
You can also d/l the unlocker there. The area where they are talking about using memory cards is like post 260 or so...good luck. Let me know if you're still stuck.
Also there's a great write up on the process here http://forum.ppcgeeks.com/showthread.php?t=17473.
I tried that it just gets stuck in bootloader, it says "loading..." and nothing happends. what am i doing wrong?
xcaliburpcs said:
I tried that it just gets stuck in bootloader, it says "loading..." and nothing happends. what am i doing wrong?
Click to expand...
Click to collapse
1. Format your MicroSD card to FAT32 (YES - FAT 32 32 32!! not just plain old FAT) (again, this is not required if your card is already fat32; it is ok to have other data on the card). I have read that the card needs to be 2gb or smaller, though I'm not sure how much truth, if any, there is to that...
2. Extract the .NBH you desire to flash from the exe or zip or w/e put it on the microsd card rename it from RUU_signed.nbh to VOGUIMG.NBH
3.Put the MicroSD card in your phone and Get To the BOOTLOADER screen (camer+power+reset) it should then start updating with the .NBH on the SD card and the procedure should begin automatically.
you can also use this procedure to unlock your phone by flashing the .nbh from Cokemans unlocker just extract it and rename it VOGUIMG.NBH or if your stuck at that HTC screen and cant sync because your phone wont boot up.
---This really the best info I can give you...just double check everything you are doing to make sure that you are doing it right. As I said I have never done the unlock process this way, but many people have. Check the second link I gave you in my original post if you need more help...they'll be able to help you I'm sure.
I have done all of that but my phone just gets stuck at the loading grey screen and nothing happends. my phone has the latest rom from sprint. its the 6.1 and I installed it by the bootloader mode with the micro sd card. anything else I can do? if not I found a guy who can repair my mini usb port, but hes about an hour away.
You'll probably waist more time trying to figure this out. I would just drive the hour and get it fixed. It would be more of an investment really especially once you re-sale it for a new phone.
Plus re-programming the phone becomes a whole lot easir 8p
Yeah, that was my Idea, either replace it or fix it. maybe sale it as is and replace it for the touch pro.hmmm, lifes hard choices. what to do...what to do? 8 (
rzawora said:
you can also use this procedure to unlock your phone by flashing the .nbh from Cokemans unlocker just extract it and rename it VOGUIMG.NBH or if your stuck at that HTC screen and cant sync because your phone wont boot up.
Click to expand...
Click to collapse
so i just copy cokemans unlocker to memory card rename it and run it like i would do for a rom?
still waiting for someone to answer this please
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Natureboyhcg said:
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Click to expand...
Click to collapse
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
KK13 said:
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
Click to expand...
Click to collapse
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
WM05 and bootloader only support 2Gb or less though there is an sdhc patch for WM05.
WM06 had the patch to support SDHC cards from 4Gb up to 32Gb. WM6.1 and WM6.5 are also SDHC compliant.
You need a 2Gb or less sd card to flash an OS or different SPL as the bootloader only supports 2Gb or less. Its not upgradeable.
Now that everythings clear as mud,
Cheers...
You could also pick up a 1 gig (or even a 512meg) card on the cheap to do your flashing, and use the 4 gig for your everyday storage in the phone. Then have the best of both worlds!
psylink said:
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
Click to expand...
Click to collapse
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
KK13 said:
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
Click to expand...
Click to collapse
HardSPL only needed to install once, after that you can install whatever ROMs you like many times.
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
ultramag69 said:
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
Click to expand...
Click to collapse
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
StefanHou said:
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
Click to expand...
Click to collapse
Did you try formating the SD card on a desktop (or laptop) computer and not phone with Memaid?? Maybe that has something to do with it. Is it a 2gig card or less than 2 gig??
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
Onya dude .. you have a better way with words !!
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
OK, will find SDconverter and try the suggestion, thx KK and Ultramag
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
zivkong said:
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
Click to expand...
Click to collapse
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
StefanHou said:
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
Click to expand...
Click to collapse
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Man, I don't have a clue. The only issue I ever encountered was thinking my card was formatted fat32 when it wasn't.
I think this is now beyond me.
StefanHou said:
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Click to expand...
Click to collapse
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Also check your spelling of hermimg.nbh as a simple error will screw up everything...
Also put sd card in then reset to bootloader, hold in all the buttons - ok, power and reset with stylus, until the bootloader comes up.
Cheers...
KK13 said:
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Click to expand...
Click to collapse
KK13, Boog and Ultramag
OK this is what I did last night:
1. Flashing to the shipped AT&T Stripped ROM
2. Having it reflashed with the HardSPL V7 (to ensure the file is non corrupted, I re-downloaded it from some links in some thread and check the file size, they are all the same )
3. Reformating my SD Card with PC for FAT32;
4. Copy the nbh file and rename it with HERMIMG.nbh (recheck three times and I think I get it right. btw, is there any different to write it in capital? );
5. Press OK and Power, then stick the reset button.
6. Go to the boot loader (with 'Serial' on ht white screen)
click here to download:
6.1---http://www.999ppc.com/Program Files/rom/M88+WM6.1.zip
6.5---http://www.999ppc.com/Program Files/rom/M88+WM6.5.zip
before upgrade rom, make sure you known how to enter bootloader.
contact me if you need help or any question.
***who get corrupted zip files, use this software to repair zip :
http://www.ziprepair.com/
*UPDATED*___________________new link download for 6.1 here:
http://www.brsbox.com/filebox/down/fc/c46dae4977fd993ec6b7074f48a3c1ab/rand/1805916922
(click the green arrow button to download)
and here is way perfect success 100% how to enter bootloader mode:
format your micro SD card to FAT32, dont give anything in this,
after download rom, put ''update.img'' to root folder of SD card,
dont create any folder, just use root folder.
copy''update.img'' and create 3 new files with name:
''uploader.img'', 'uploader'' , ''update''
rememer some files need type .img inside, and some file no need type that.
that mean you just need total 4 files in card.
then put card to phone, keep it turn off.
now turn on phone by hold home key and power key same time,
you will see white screen or red screen show '' image downloading please...''
wait about 5-10 mins, will be completed.
WARNING:
- if you haven't create all 4 files, you'll get blue screen with only
hard reset.
- SD card 4gb and 8gb can't use to do this job.
- Low memory card will give bootloader time faster, example : 512 MB
thank you for readed and good bye, contact me at : [email protected]
file corrupted
Hi, the two files are corrupte, could you repair it, Im very interested in these roms... thanks
nellmarliz said:
Hi, the two files are corrupte, could you repair it, Im very interested in these roms... thanks
Click to expand...
Click to collapse
hi
i just downloaded test it again , haven't corrupted .
may be your download network problem make file corrupted.
you try use software help download faster, may be IDM ?
yeah both arquives are corrupt! can you upload it again
***who get corrupted zip files, use this software to repair zip :
http://www.ziprepair.com/
sorry.....
Languages of rom?????
Thanks Boss!!!!
Hi two questions first language in english????
Second I downloaded files and even with program that you said to repair zip files still cannot unzip the image file????
What shall I do?????
hi guys beware they do not not if it is original have a read here
http://translate.google.com/transla...ttp://www.999ppc.com/Program+Files&hl=en&sa=G
can not repair the file, please help
please we need the file in a good position to create and install
please we need the file in a good position to create and install
I was finally able to download 6.5 but its in Chinese. Is there one in English?
*UPDATED*___________________new link download for 6.1 here:
http://www.brsbox.com/filebox/down/f...and/1805916922
(click the green arrow button to download)
please help, i not understand this page, is chinese
please can u upload in any ra..id share site so we can dnld it this site dont let me more than 5-7% i use mozilla and ie7.
thank u
bob
friends, the two roms are in chinese language, no use to us any
I wonder if the new link is chinese too...
yes it was but some good things on it like patch for sd card a program for true bass i take for music and registry editor and program to show you cpu usage shame it was in chinese but windows was very quick compared to version 6
hey ... is there a version of wm 6.5 or 6.1 in english or it doesn't exist?
the two roms are in chinese language, no good