Develop Bugs

Reset to cradle and more

I'm in serious need of help - i tried to upgrade my sx56 to the 4.00.05 with voice command and now i can't get the back light on, i've got no phone and i can't even get the usb connection to notice the unit.
HELP - what do i do to fix this problem
thanks :shock:

Can you get to the bootloader? If it was only the operating system that you flashed you should be able to recover it. You will need an sd/mmc card, a card reader/writer and xdatools. All the info is here on the forum. You can download a rom from www.yorch.net and choose at the bottom of screen "sd card flashing".

forgive my ignorance but where would i find the bootloader and i unfortunately don't have a sd card as yet - i've been looking into that guess i'll be gettng one pretty soon
may i assume that this will resolve the issue that my usb connection is not even recognizing that my unit exists
thanks
robin

hey cruisin-thru, i have just purchased a 256 card - will i be able to resolve this problem or am i totally screwed
thanks
:shock:

Hi ...
since ur gonna flash ur XDA with SD i may advice you to get a newer ROM than 4.00.05. i recommend either TMO 4.01.00 or A30.09. both you can get cooked at Stefan kitchen at lumpistefan.dyndns.net
once you cook the ROM as .nbf file and download it, u will need SD reader/writer for ur PC. move the file to the SD card and insert it into ur XDA. if it asks u to format it just press NO.
goto the bootloader by pressing and holding the power button while soft reset. it should recognize the card content and ask u to press the action key .... enjoy ur new ROM!
note: if u still want the 4.00.05 ROM, use winzip or winrar to open the exe file and extract the .nbf file and follow the above steps.
good luck ...

thank you for your assistance - i've just purchased the card reader/writer and am about to transfer the .nbf file over
you indidated going to the 4.01.00, can you tell me what difference there is between the different roms
thanks again for all your help
robin

Hi ...
Mainly the diferences are bugs that are fixed in old versions like some issue with the back light, SD card erasing, self rebooting ... etc.
A30.09 is perfect except it has an annoying sound issue and has no extras at all ... that's why I prefer TMO 4.01.00
BTW, I noticed that I just misspelled the kitchen address ... it's http://lumpistefan.dyndns.org/

Converting WM2k3 from Korean to English

I was wondering if the Korean WM2k3 PPC Phone Ed. can be converted to English? I believe I have seen a discussion on this website where someone had successfully converted from Chinese to English and vice/versa? Any help is greatly appreciated. I am looking at some of the awesome Korean PPC's and am hoping to be able to convert it. I just have to make sure it works on 1900mhz so its compatible in the US. Thanks for any help...

asume it's a xda1 then make a english rom in one of the kitchens
and use xdatools to flash it
http://wiki.xda-developers.com/wiki/XDAtools
changing to a rom of another language change the language it's pretty much as simple as that

Thanks. Its great to know that it can be done. Your website is the only place that has said it CAN be done while all the rest said it can't. However, I am an extreme newbie to the PPC and honestly dont fully understand but I will continue to attempt to figure it out. I guess I will see about ordering the LG SC8000 possibly since it works on 1900mhz and can be converted. Thanks....

Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
a guide somebody wrote once about how to upgrade a Wallaby device
but if you are very very newbiee then maybe you should have somebody do it for you so you dont ruin the device making it an expensive doorstop

I am a very very newbie due to the fact I have always used Palm which is Kindergardenish compared to PPC. I still think I get the drift on what to do though because it sounds mostly like what you might do with normal windows. This is going to sound extremely retarded but here it goes, do you have to have an SD Card disk drive hooked to your main computer to install stuff on it? I suppose in this case maybe, due to it being in a different language. Anyway, thanks alot. I will let you know how it goes.

[NEW ROM][WWE][Asus P527]SCHIST WM6.5 21864

The thread here is CLOSED and is moved on

download pim backup for having backup of ur device.. dont backup from asus backup.

kalpeshmist said:
download pim backup for having backup of ur device.. dont backup from asus backup.
Good Work
Click to expand...
Click to collapse

what is the language?
how many memory (sire and ram) he take?

kalpeshmist said:
these are the wm6.5 build 21189 for ASUS P527.
SCHIST_21189
SCHIST_21189lite(office and taskfacade included)
youtube video link -- http://www.youtube.com/watch?v=kVVBVYrSXjI
thank you hdubli for helping me, solving the messaging inexecutable bug.
apps removed in the lite version:
opera mini, google navigator, pocketrar, adobe pdf, rss hub
pls feedback!!
SCHIST ROM Installation
METHOD #1
1> unzip the rar file.
2> make sure you are usinig windows xp (not vista) and your device is connected to the pc via activesync.
3> click Flashrom.bat. Follow the instructions.
4> Flashrom.bat will automatically open P527FUU.exe
5> browse the OS option to flash.dio.nb0.
6> 'check' os box and 'uncheck' gsm box.
7> click ????, and updating process runs. do not disconnect your device till its 100%
METHOD #2
if you are not using windows xp...
1> copy flash.dio.nb0 from the extracted folder to your device's memory card.
2> after copying, pull down the lock on the right-side of your device, then press and hold the left-side ok button and the camera button and make a soft reset.
3> you'll see an sd card flashing process running on your device. keep holding the two buttons even after the soft rest till you see a numerical percentage process running.
4> wait till it gets 100% and reboots.
**NOTE:
-- make sure the battery life of your device is more than 40% before you begin installation.
-- after updating, it is necessary to make a hard reset to your device by holding up the left-side scroll key and pressing a soft reset. keep holding the scroller up till you see a WARNING page. press the answer button.
-- there is no ASUS Backup in this ROM, may be it'll in the future. make sure you backup all your contents using PIM backup only.
-- updating from your memory card many or less times might lose your sd data. make sure you backup all your memory card files.
official roms here -- http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P527
Click to expand...
Click to collapse
thanks kalpeshmist, will try and get back to you!
do you by any chance have official p 527(preferably Indian version) rom backup in
flash.dio.nb0
GSM.dio.nb0
EXTROM.nb0
format?
I am not able to flash the official rom in both expert and normal mode!
but able to flash using sd card mode and using P527FUU.exe

superb
tried full version! Good work! wm 6.5 is really good! need to check more things but first impression is very good.

ppindia said:
thanks kalpeshmist, will try and get back to you!
do you by any chance have official p 527(preferably Indian version) rom backup in
flash.dio.nb0
GSM.dio.nb0
EXTROM.nb0
format?
I am not able to flash the official rom in both expert and normal mode!
but able to flash using sd card mode and using P527FUU.exe
Click to expand...
Click to collapse
yes... i have those 3 nb0, officials. but exe shud run. u need activesync installed in ur pc nd connected to ur device.

ppindia said:
tried full version! Good work! wm 6.5 is really good! need to check more things but first impression is very good.
Click to expand...
Click to collapse
here its is
the 3 nb0 (wm6.1 official indian version) is in this rar file..

Thanks
kalpeshmist said:
here its is
the 3 nb0 (wm6.1 official Indian version) is in this rar file..
Click to expand...
Click to collapse
Thanks kalpeshmist, I was looking this for long time. my phone bricked when I was flashing had to use a Russian ROM to recover the phone and then tried a manila cooked rom with touch flo interface by pda.net(this is also good but slow ). But yours wm6.5 cooked ROM is very good. only problem I had was that opera browser was not working it got stuck when starting for first time even installed opera once again but still not working.
Could you also share as to what all tools you used to cook the ROM and where you got wm6.5?

kalpeshmist said:
yes... i have those 3 nb0, officials. but exe shud run. u need activesync installed in ur pc nd connected to ur device.
Click to expand...
Click to collapse
some how I was not able to flash using the official utility and ROM wm6.1 it always gets stuck. I find that SD card way of updating the ROM to be the best. only problem might be that SD card has to be small and formatted correctly!

ppindia said:
Thanks kalpeshmist, I was looking this for long time. my phone bricked when I was flashing had to use a Russian ROM to recover the phone and then tried a manila cooked rom with touch flo interface by pda.net(this is also good but slow ). But yours wm6.5 cooked ROM is very good. only problem I had was that opera browser was not working it got stuck when starting for first time even installed opera once again but still not working.
Could you also share as to what all tools you used to cook the ROM and where you got wm6.5?
Click to expand...
Click to collapse
yeah.. opera mini is not working.. i'll fix that in the new build. im working on wm6.5 build 21202 now.. just waiting for more responses of this 21189 and then i'll upload it..
download this opera mini cab file
it'll run fine. it runs in mine.
ppindia said:
some how I was not able to flash using the official utility and ROM wm6.1 it always gets stuck. I find that SD card way of updating the ROM to be the best. only problem might be that SD card has to be small and formatted correctly!
Click to expand...
Click to collapse
sd card installation is very good and its the fastest way of flashing a rom in p527.. within a minute, the flashing's complete...
i flashed many a times with sd installation when i was testing 21189.. but then, my card reader didnt just locked the sd card.. i changed the micro sd adapter and then it starting working fine.. but again, the card was locked..... it was running fine in my p527.. the mass storage option is working fine.. but whenever i put a card reader for copying using the same adapters.. the card is locked and i cant edit...
so, i recommend to use usb installation if u r flashing it many times..!!

Secret mode in p527
in asus p527 when you
with lock on
volume down + ok + reset
release reset first
shows a secret menu. but I am not able to select any of the options do you have any idea how to select the options. none of the key pad keys work!

ppindia said:
in asus p527 when you
with lock on
volume down + ok + reset
release reset first
shows a secret menu. but I am not able to select any of the options do you have any idea how to select the options. none of the key pad keys work!
Click to expand...
Click to collapse
yeah, a black screen shows with all the options... but keys r not working!!

keypad abc mode solved!!
first thing download the three..
read the instructions first from t9abc.. it'll solve ur keypad bug!!! i extracted the registries from wm 6.0!! there is still a little prob of xt9 but keypad works fine.. all u have to do when writing, close keyboard. press and hold '*' select abc mode.. and u can write sms or nething using keypad just like u had in wm6.0..
i'll fix those things in new builds..

Excellent work
Hi Kalpesh.
Excellent buddy! Nice work. was looking out for such roms. hats off to u. i hope u'll b coming with much more tweaks on it & improve it. keep it going buddy.

Shreyas said:
Hi Kalpesh.
Excellent buddy! Nice work. was looking out for such roms. hats off to u. i hope u'll b coming with much more tweaks on it & improve it. keep it going buddy.
Click to expand...
Click to collapse
thnx! right now im in holidays.. will continue work after a week or so..

Hi,
Could you also upload the Kitchen for it, I tried the lite version, but t still had some extra stuff, looking for a very plain version of 6.5 with no additional applications, hope that helps, thanks for your help, not many people developing ROM's for ASUS especially not in english, lol

Kitchen
Can u plz upload the kitchen ... actually not many people around worling on p527 wwe roms...

tawheedmanzoor said:
Can u plz upload the kitchen ... actually not many people around worling on p527 wwe roms...
Click to expand...
Click to collapse
let me complete with the new build first..

new build uploaded!!

[How-To] properly install Android

It is not quite self-explaining how to install Android on our Windows Mobile devices. Therefore I took some time and wrote down all the steps for people who are new to "Android".
More testers -> more experience -> more knowledge -> faster/better development.
I hope this way the forum is kept clean(er) from all kinds of questioned that have already been answered many times.
ReadMe Includes:
- Partitioning
- Device preparations
- Boot loader
- Install steps
- Fixes
- Links
- more...
If you are a developer (you create your own package) feel free to use my ReadMe for your packages (update regularly though).
to download the ReadMe click the [Android Repository] button in my signature.

It goes to a rapidshare page with 3 files, and when I click on the filename Android_README.TXT
or start download, I get the error
The file could not be found. Please check the download link.

ok thanks. i fixed it (rs bug when renaming files ^^)

How would i partition a 1GB SD Card? ie what sizes etc are the last 3 same but the unallocated is just whats left over?
I want to use a spare card rather then the one that came with my HD.

ATHiEST said:
How would i partition a 1GB SD Card? ie what sizes etc are the last 3 same but the unallocated is just whats left over?
I want to use a spare card rather then the one that came with my HD.
Click to expand...
Click to collapse
normally just calculate how i wrote in the readme:
whole space -768 (3* 256) and then the other 3 x 256
but in ur case i would make the swap smaller (i think its not even used at all) and the fat32 bigger; for instance:
fat32 - 384 MB
ext2 - 256 MB
ext2 - 256 MB
swap - 128 MB (rest)

To be honest the bit I find most confusing is all the different versions!

i didnt create any partitions on my card, and android works as good as it does on any, mind you i have not updated the files fo0r a month so alot might have changed

ReadMe updated!
updated a bit...

Geeba said:
To be honest the bit I find most confusing is all the different versions!
Click to expand...
Click to collapse
i agree...
i've been looking these posts here for a couple of days now and i still don't know how to do it....
especially the DualBoot thing...
is it possible to make a little bigger how-to manual?
or at least explain the versioning and the needed thing a little more?

the readme is about 50 times longer than anything else u will find about installing android anywhere else
the different versions are just like in windows mobile, theres not much to explain, its rather up to ur personal preference. doesnt take as long as flashing a wm rom, so its easy to try out more versions, especially with more sd cards.
dual boot is easy:
1. install the cab
2. open the dual boot program and make all your settings, for example: auto boot android (click on the checkbox/ratio under android logo), check auto boot checkbox and check fast boot (means 3 instead of 10 secs).
3. restart your device, DONT LAUNCH HARET because that will destroy all the dualboot settings. if you restart/shutdown the device normally, the settings will be stored and android will automatically booted at next startup (or whatever you set before)
if you have android autoboot and u want to boot wm, just QUICKLY press the wm LOGO when the dual boot screen appears.
i might include this in the readme soon, just dont have the time right now unfortunally

N!ghty said:
the readme is about 50 times longer than anything else u will find about installing android anywhere else
the different versions are just like in windows mobile, theres not much to explain, its rather up to ur personal preference. doesnt take as long as flashing a wm rom, so its easy to try out more versions, especially with more sd cards.
dual boot is easy:
1. install the cab
2. open the dual boot program and make all your settings, for example: auto boot android (click on the checkbox/ratio under android logo), check auto boot checkbox and check fast boot (means 3 instead of 10 secs).
3. restart your device, DONT LAUNCH HARET because that will destroy all the dualboot settings. if you restart/shutdown the device normally, the settings will be stored and android will automatically booted at next startup (or whatever you set before)
if you have android autoboot and u want to boot wm, just QUICKLY press the wm LOGO when the dual boot screen appears.
i might include this in the readme soon, just dont have the time right now unfortunally
Click to expand...
Click to collapse
Thanks for the dualboot help... i'll try that...
the first problem I have encountered yesterday when trying to put Android was SD card formating...
i downloaded the program you said and followed the instructions oh how-to and was not able to do it under Windows 7 with my 16GB SD card... does it even work for Windows 7??? is there another program I can try to do it with???
I have also dualboot on my PC with the Kubuntu being the second OS, but I'm not using it as much as Windows 7... I can try with it if you think it will work.. but first I have to download the 15GB of data from my SD card to my PC, again
I would like to put the Espresso build cause I saw that it has everything working beside the GPRS and camera...
can you tell me what should I download for my Blackstone so it works properly???
thanks alot...

qtype said:
Thanks for the dualboot help... i'll try that...
the first problem I have encountered yesterday when trying to put Android was SD card formating...
i downloaded the program you said and followed the instructions oh how-to and was not able to do it under Windows 7 with my 16GB SD card... does it even work for Windows 7??? is there another program I can try to do it with???
I have also dualboot on my PC with the Kubuntu being the second OS, but I'm not using it as much as Windows 7... I can try with it if you think it will work.. but first I have to download the 15GB of data from my SD card to my PC, again
I would like to put the Espresso build cause I saw that it has everything working beside the GPRS and camera...
can you tell me what should I download for my Blackstone so it works properly???
thanks alot...
Click to expand...
Click to collapse
like the readme says: partitioning is only needed for partitined builds, which means that android uses several partitions to store different kinds of data, for - hopefully - more speed. only glossy uses partitions, espresso doesnt.
for glossy, u can also use ubuntu (download parted magic or something similar) to create partitions.
for espresso, u just need to copy the stuff onto ur sdcard.
but thats all in the readme... i dont have time to explain in detail coz i need to study a whole ****in lot at the moment +.+

N!ghty said:
like the readme says: partitioning is only needed for partitined builds, which means that android uses several partitions to store different kinds of data, for - hopefully - more speed. only glossy uses partitions, espresso doesnt.
for glossy, u can also use ubuntu (download parted magic or something similar) to create partitions.
for espresso, u just need to copy the stuff onto ur sdcard.
but thats all in the readme... i dont have time to explain in detail coz i need to study a whole ****in lot at the moment +.+
Click to expand...
Click to collapse
ok... thanks for the help... you helped me a lot just with the claryfication of the versions that need partitioning and the ones that don't...
i didn't know that...
good luck with studying!!!!

one more question...
I get the following message '' Failed to load file\Storage Card\zImage''
Can you help me with that????

qtype said:
one more question...
I get the following message '' Failed to load file\Storage Card\zImage''
Can you help me with that????
Click to expand...
Click to collapse
meaning u dont have a zImage at all (ur probably using espresso?). so download one from here, copy files onto sd card and rename "zImage.xxxxxx" to "zImage" and ur ready to go.

N!ghty said:
meaning u dont have a zImage at all (ur probably using espresso?). so download one from here, copy files onto sd card and rename "zImage.xxxxxx" to "zImage" and ur ready to go.
Click to expand...
Click to collapse
yep, I downloaded it but I didn't know that i have to rename it...
It did the trick... booting up Android
thanks for all of your help...

updated the readme, not includes DualBoot howto and some other changes...

I managed to get the WiFi working but no matter which zImage I'm using I can't get the 3G to work...
I'm I doing something wrong or did I maybe forgot to do something????

qtype said:
I managed to get the WiFi working but no matter which zImage I'm using I can't get the 3G to work...
I'm I doing something wrong or did I maybe forgot to do something????
Click to expand...
Click to collapse
well, some details about what version you are using would be helpful. however, this is not the right channel to ask this question. i think this question has already been asked several times in other threads. try search function or read the thread for ur version, its probably a version-issue or only for your country/provider

N!ghty said:
well, some details about what version you are using would be helpful. however, this is not the right channel to ask this question. i think this question has already been asked several times in other threads. try search function or read the thread for ur version, its probably a version-issue or only for your country/provider
Click to expand...
Click to collapse
sorry about that...I realized it later that I should ask in another thread that question...
I managed to figure it out... I just needed to manually configure my APN settings...

Android ON Diamond ?

Hey
can any one help me to install (use) Android on My Touch Diamond ?
i read many thread but i cant install it
ty

- the first, u download android package full (ex : [Donut 1.6 Donut][Samsung Galaxy S Theme][Released 07.16.2010] ) , extract it on pc, copy all files to Internal storage ( diamond ) , then copy file STARTUP.TXT in folder startup to outside (root)...done !
- chose haret.exe in root and wait android boot on divice

escoda said:
Hey
can any one help me to install (use) Android on My Touch Diamond ?
i read many thread but i cant install it
ty
Click to expand...
Click to collapse
First of all you have to decide on which version you use. If you wanna use Xdandroid-method then go the way escoda recommended you.
If you wanna try something else then try my builds (requires partitioning)

vatoloco said:
If you wanna try something else then try my builds (requires partitioning)
Click to expand...
Click to collapse
Hi vatoloco, can you tell me how partitioning diamond on windows?

As far as i know you can't, but you can use Gparted, a freeware linux app.
If you haven't got linux, you can just download a live gparted cd and boot directly from this one, without changing your OS at all

cinars said:
- the first, u download android package full (ex : [Donut 1.6 Donut][Samsung Galaxy S Theme][Released 07.16.2010] ) , extract it on pc, copy all files to Internal storage ( diamond ) , then copy file STARTUP.TXT in folder startup to outside (root)...done !
- chose haret.exe in root and wait android boot on divice
Click to expand...
Click to collapse
many thanks i'll try it now

vatoloco said:
First of all you have to decide on which version you use. If you wanna use Xdandroid-method then go the way escoda recommended you.
If you wanna try something else then try my builds (requires partitioning)
Click to expand...
Click to collapse
vatoloco thanks for ur reply i'll try it as soon as i can

OK...New to this and would love to learn and understand how to mod my phones...I have an LG eve, Iphone 3g and a HTC touch diamond and have figured out how to jailbreak the iphone...Now I know the LG eve is hopeless as far as upgrades and I am trying to figure out how to install Android on my Diamond...So far I have copied the files to a folder...
The 2 root access files are copied to my internal storage however i am not sure what to do about the Galaxy s build....Do I copy the whole folder or do I copy everything but the start up config file? I am a bit confused...Please help...Oh and will I still have Windows in the phone or does this take it out? Oh and if I have issues can I revert back to windows? Sorry for all the newbie questions...I have searched and read for like a month now and it seems so complicated...This is the first thread that seems simple enough...Please help me...Thanks so much...
Ok so I copied the files and am not sure where to find the STARTUP.TXT files..? I found 2 files in the Galaxy folder in the start up config however one of them is Black start up and other is called Diam start up ? with one do I copy? Or am I am the wrong path? I also opened the Haret.exe file on the phone and get the error:
cannot open script file/internal...etc...Please help...
Thanks
Andy

please help? I have tried everything I can think of and have been reading for like 8 hours now and still can't seem to get it to work...I download the above files and then copied the startup.txt in the other partition and when i click on the Haret.exe...nothing happens...Tried it like 20 times...When you run file wizard starts it automatically has the install.exe or something like that...should I replace it with something else? please help...I am having a hard time explaining this so if you need more info please let me know...thanks

I tried to use Android on diamond by using sometime like Eclair but unstable and slow. It takes me almost 5 minutes to boot up and gives me a crash when I use it for minutes.
Is there any way to remove the windows and just use Android instead? Thanks.

Hi, I also had issues installing Android. First I thought it was too nasty.
Finally, by mixing many instructions I got it.
I would say, for [Xd]Android with an EXT2 partition (from Linux):
1/
Start Ubuntu from a bootable CD (No need to install it) and follow the steps from Vatoloco (Thx for this video) here:
Video1
When done you can move back to windows. You should take some notes from the video to do the same.
2/
- Then you can take the Neopeek Android Installer V1.1, found on Neopeek's website:
CyanogenMod6 - Port
+extract on your pc
- Also download the Android build (for example the one here from Neopeek) called "CM6 RC3 (Nightlie Build 17-08-2010)" on the same page.
- And the "HARET-PaketV1.5" +extract on your pc
3/
- Rename the Android build you just downloaded as "androidinstall.tar.gz"
- Then copy "npkinstall" folder to your internal storage (the fat32 partition)
- In your "internal storage\npkinstall" folder, copy the android build "androidinstall.tar.gz"
- In your "internal storage\" (root) copy what is contained in "Haret-PaketV1.5"
- Copy the "startup.txt" file from your own device (found here: "internal storage\Startups" to the root : "Internal storage\"
===== You're done ====
4/ The only step remaining is to run the 2 programs:
- "Internal storage\npkinstall\install.exe"
(It doesn't take too long, if you read what is written (and readable ), you can see if it worked)
Your device will restart at the end of the installation.
- Then Run the last program:
"Internal Storage\haret.exe"
It takes longer. When Android starts it seems to be bugged but finally work if you are patient. Next restart will be a lot better.
=====================
On my side, I used Android only a few hours as it did not meet my expectations.
It works perfectly and is smooth enough. But I will perhaps use Android when we won't need to have windows also installed.
Hope it helps! I just collected some infos and put that in 1 thread.

is it reccomended to use this android http://forum.xda-developers.com/showthread.php?t=735978 all day, always? i don't like WM so i wanna use android. but does it work fine? sms photo and internet?

daniel93 said:
is it reccomended to use this android http://forum.xda-developers.com/showthread.php?t=735978 all day, always? i don't like WM so i wanna use android. but does it work fine? sms photo and internet?
Click to expand...
Click to collapse
hi
I use this one now for a 5 or 6 days without going back to WinMO and it still works perfect. only thing is that you have to charge twice or more a daybecause you cant see the correct battery state. last time i checked the uptime without charging was around the 8 hours. but i didnt know how long it lasted after that.
you can download it from this page
|prj||XDANDROID||2.2||AOSP||19.8.10|SYSTEM-UPDATE||
with the latest kernel initrd and rootfs
you can download these from here
xdandroid.com.
also check the above page often because it will be continues updated
They only thing that isn't working is the Camera/Video function.
Have fun with it
Fill