Related
Hi
I HardSPL my phone with Hard-SPL-V7 then I have update wm6.1 (OS+5.2.19209+(Build+19209.1.0.2+PV+DVH)+(B&C)+8MB+PP.rar) but
my phone is continuous halting after 5 to 6 hours as well as 1 to 2 days then after halting i have to hard rest the phone to run again. I have change many roms but the halting problem remains same.
Please anybody help me
Regards
you need to flash a stock windows mobile rom. the best seems to be the ATT rom.
Do this before you flash any rom and it is sure to fix your problems.
You are able to find the rom in the WIKI.
thanks for ur reply
i have download rom from wiki but not installing in my phone
actually i have imate jasjam radio version 1.07.03.10. problem is
when i install rom in my phone error occur the rom version problem or cable not connect.
note that i already install hard spl v7. ipl 2.01 olipro
what should i do. may i downgrade radio version before install wiki rom?
please help me
You could try flashing the ROM from the SD Card, I had the same problem and that worked for me. Instructions on how to do so in the wiki.
Thanks hamster, I have successfully install wiki ROM with following steps.
1 - Download wiki rom for my mobile
2 - Download Dutty's Good NBH Tool
3 - Extract .nbh file from wiki rom
4 - Create new .nbh file from Dutty's Good NBH tool
5 - Install new rom from RUUWrapper.exe.
Please tell me now what to do? am i install wm6.1 now?
ialwaywanted, you are using the wrong instructions... What you need to do is format an sd card fat 32. copy the .nbh file onto the sd card and rename it to "hermimg.nbh". Put the sd card back into you phone and go into bootloader(hold ok button above flywheel, power button and use stylus to soft reset. hold all three buttns in until you get to tri-colour screen). It should automatically detect the os upgrade and ask you to push power button to upgrade os. After it finishes soft reset and you will have successfully upgraded os with sd card. I find this safer than using the pc as ther will be no "accidents" with power, usb cable being yanked or resetting of the pc.
Hope this helps..... Cheers...
Yes i have successfully install rom in phone from SD card. Greart its working thanks a lot.
But my actual problem is when i install wm6.1 its stuck my phone on any screen then i hardrest the phone which cause all my installed progam and data was removed from phone.
Please suggest.
I seem to have success with Pdaviet 19900 and 19581. These were very stable for me when others weren't. You might need to experiment with different series of 6.1.
As for backing up everything on my phone, I use SPB backup. Please note however it is a commercial program. Also, you have to be restoring the backup on the same version and series of wm6.1 otherwise you will have problems.
It puts EVERY file back exactly as found so upgrading then running the restore is pointless. You have to find the right rom then backup. Make sure you back up regularly though or else you will find things missing. Cheers....
hey guys,
i've problems to update my pocket pc to mobile 6. I tried both methods no one works for me.
First i tried to connect my pocket to my pc and started windows mobile center. Downloaded all the files, but always when i start the update, my pocket goes to the boot screen with the red, freen and blue stripes and the connection disconnects. And i get the message 260 update problems and my pocket stays at the boot screen. Than i tried the same with Windows XP and ActiveSync, the same problem again.
After that, i tried to update with a micro SD card 2GB. I downloaded the "Hard-SPL-V7"-File and saved it to the micro SD. Rebooted the Pocket, but nothing happend, the pocket stayed in the boot screen. Than i renamed RUU_signed.nbh in HERMIMG.nbh and tried it again, nothing happens.
Can somebody help me please? I want to use mobile 6, because i want to use a 8GB Micro SD.
EDIT: THANKS A LOT, but now i have a new Problem i described it in post #6 in this thread. Thank u 4 helping me.
EDIT II: Thank u all, i fixed it by myself. Finally the upgrade worked with XP and ActiveSync. The best thanks to ultramag69 again, he solved my problem.
If you are using vista you need to install this, removing all older versions
Do you have the newest .net framework on your computer from here?
You wont be able to flash via SD without HardSPL, so you need todo it via activesync.
Try another USB port.
Try flashing the shipped from for your device, you can get your newest WM6 rom from here.
If that fails, tell us:
Whats your device (theres loads of different models of the Hermes)
Have you flashed anything before?
What rom is on your device atm?
What SPL do you have atm? (Hard or not)
Also check your serial number against this list for known problems.
There are certain steps needed to be taken. First is making sure your computer has the .net compact framework. Get it here.
Only then can you run hard spl from your computer.
Also, when you put on a .nbh file onto the microsd and rename it, you need to go into bootloader not reboot. You need to hold the power button and ok button while pressing the reset button with stylus...
I have got the same problem....
Using XP not able to flash neither via Active sync nor by SD card...
Stck at MRH 8.4...
Go to post 1160 on page 116 of this thread to flash Hard SPL using the sd card method - http://forum.xda-developers.com/showthread.php?t=296722
You can't flash using the sd card method without Hard SPL. To flash Hard SPl on you need to do an extra step - flash with soft SPL.
To flash the os just leave out steps 5 & 6 from the above post after you have Hard SPL installed...
Cheers...
Thank you guys for helping me,
A big thank to ultramag69, your post solved my problems. It worked great.
But now i have a new problem. I upgrated the SPL to HardSPL v7 (opipro 2.10). With the help from ultramag69 it worked perfect. Sooner i did the radio update with Micro SD - worked perfect too.
So finally i tried to update the ROM, downloaded the german ROM version from this Thread copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and did a reboot (ok, start and reset buttons) like i did it before. But it shows me at the screen only HERMIMG.nbh and BOOTLADER. When i start the update it runs 2 seconds and i get the message HERMIMG.nbh - OK BOOTLOADER - OK UPDATE COMPLETE. But it doesnt start the WM6 Update. Why not? Can someone help me again please?
I think the only file that's supposed to be on the microsd is the hermimg file...
not sure if having other files there will effect it like that...
Rollswap said:
... copied all files to the micro SD, renamed the SPL.nbh file in HERMIMG.nbh and... But it doesnt start the WM6 Update. Why not? Can someone help me again please?
Click to expand...
Click to collapse
the only file that you have to copy to your SD card is RUU_Wrapper.nbh (size: about 90 MB) after naming it to HERMIMG.nbh
note that this will up-/downgrade your Radio to V1.47.00.10 so you can also check other available German Versions with other Radio versions on the Hermes Wiki
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
alex8525 said:
Please help
I have done everything but not able to flash...
Currently i have flashed AT&T rom...
with Hard SPL (a year ago)
I am not able to flash via USB or by SD card...
always everything stuck at bootloader
Please help
Click to expand...
Click to collapse
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
zocster said:
Ok are you running XP? what errors do you get on your PC? what ROM are you running currently? etc etc, the more information you can give us the more we can help
Click to expand...
Click to collapse
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
alex8525 said:
I am using XP..Activesync 4.5 installed...
Previously I have flashed many ROMs using this setup and even I have flashed AT&T official ROM yesterday (Previously I was on MRH 8.4)
Now I am not able flash...Phone is connected and synced...
On strating any Flash (I have tried many PDAcorner, MRH, Schaps etc.. Even AT&T official again) It goes upto bootloader, I can see USB in bootloader..
After that PC shows your phone is not connected acheck USB connection...
And even using SD card method I can go up to bootloader then it does'nt flas anything and not even shows any ROM...
I have Hrd SPL alredy flashed
Any one help?
Click to expand...
Click to collapse
Ok so what is the status of your device now, have you flashed back to official shipped rom?
Please try these instructions. also here please view.
If the sd card is more than 2gb it won't be recognised by bootloader. The os (wm06+) is able to detect and read sdhc but the bootloader doesn't.
Did you format the sd card fat32. I know a few people who swear black and blue they did but when I reformatted it, it was registering as being fat.
Did you copy ONLY THE .NBH file to the sd card and rename it to hermimg.nbh? Won't be recognised if you didn't.
These are steps I tend to go through myself as 1 little thing overlooked can mean either nothing happens or disaster....
Cheers...
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Natureboyhcg said:
i read around for methods on flashing a rom. this is my first time .i did a back up with hpb backup and put hard spl 2 on my phone. from what i read sdcard is the best route to go . my question is do i need to erase everytihng off of my card before doing the rom? or can i leave it all there put the ruu file on there and get started ? maybe i should ask is there a tutorial to how to do the different methods?
a side note how do i know if a rom is friendly to changing the orientation when you slide for the keyboard
Click to expand...
Click to collapse
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
KK13 said:
No you don't have to take everything off the card. Make sure your card is 2gig or smaller and not SDHC. Here is a link to the instructions in the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlash
As far as the keyboard orientation you could search in the rom's thread for any reference to it or just flash the rom and see for yourself.
Click to expand...
Click to collapse
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
WM05 and bootloader only support 2Gb or less though there is an sdhc patch for WM05.
WM06 had the patch to support SDHC cards from 4Gb up to 32Gb. WM6.1 and WM6.5 are also SDHC compliant.
You need a 2Gb or less sd card to flash an OS or different SPL as the bootloader only supports 2Gb or less. Its not upgradeable.
Now that everythings clear as mud,
Cheers...
You could also pick up a 1 gig (or even a 512meg) card on the cheap to do your flashing, and use the 4 gig for your everyday storage in the phone. Then have the best of both worlds!
psylink said:
im confused, does the card need to be 2gb or smaller, not sdhc, to properly do hardspl or general. cause ive read the phone only supports 2gb or smaller microsd. but i have also seen the 16gb or 32gb thread, ive seen others saying about using larger than 2gb cards in their phones. im awaiting the delivery of my phone currently and i have a 4gb microsd i use in my htc excalibur i was planning on using. so im majorly confused as to if im going to be able to use it or not, or if i just need a 2gb to do the intial hardspl then ill be fine w/ my 4gb once i go to a cooked rom.
would greatly appreciate some clarity on this all from someone.
Click to expand...
Click to collapse
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
KK13 said:
You need a smaller than 2gig card for flashing. Everything else you can use your 4 gig card. (As Ultramag69 and Boog321 say) The original question was to do with flashing hardspl or roms only.
Click to expand...
Click to collapse
HardSPL only needed to install once, after that you can install whatever ROMs you like many times.
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
ultramag69 said:
True, but if you use the sd card method to install roms you will still need a 2Gb or less sd card...
Click to expand...
Click to collapse
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
StefanHou said:
Hi Ultramag
I have a problem installing with sdcard.
Have followed the Wiki, have discussed with you previously, Boog and anagarika still no solution. I have elaborated step by step what I did in separate thread.
Do you mind have a look and advise some?
http://forum.xda-developers.com/showthread.php?t=316726&page=34
Click to expand...
Click to collapse
Did you try formating the SD card on a desktop (or laptop) computer and not phone with Memaid?? Maybe that has something to do with it. Is it a 2gig card or less than 2 gig??
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
Onya dude .. you have a better way with words !!
ultramag69 said:
As KK13 said, try a pc to format the card as the steps are right.
Double check that the .nbh is named hermimg.nbh as I know of at least 2 people who named it herming.nbh, small mistake but a critical one.
Remove and insert the sd card then reboot to tri-colour screen. Might do something.
But I strongly recommend using the PC to format the sd card FAT32.
Cheers...
Click to expand...
Click to collapse
OK, will find SDconverter and try the suggestion, thx KK and Ultramag
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
zivkong said:
*Newbie* Custom ROM Flashing Guide
Just follow the steps start from 1. Don't skip step unless it is an optional step.
PC Requirement: Windows XP, ActiveSync [Don't try to flash with Vista if you are new], 7zip Installed (Google it)
Connect your device to your computer and make sure the ActiveSync icon appeared on your phone before proceeding. 50% or above bettery is a must. Your phone won't charge when flashing.
1. HardSPL (A Big Big Must)
I asume you are using the original ROM from manufacture as HardSPL won't work with custom ROM.
Download HardSPL V7 from here. Unzip the whole things. Execute the "RUUWrapper" thing and select "Force Using SSPL". Check all the boxes in all the steps and continue with updates. Look at your phone and press "Yes" to everything that prompted. Then your phone will restart in Tri-Color mode [a.k.a bootloader] and start flashing HardSPL.
In this case if any errors appear on your computer screen before the update progress start, soft reset your phone, let it boot into Windows and start RUUWrapper again.
If error appear during flashing progress, then you might in deep hell. Try not to worry. Manually put your device into bootloader (Hold On/Off Btn + Left OK Btn, then push the soft-reset btn). Then start the RUUWrapper again.
End of the step you should see 'HardSPL 2.10Olipro' in bootloader mode.
2. Radio Flashing *Optional*
You can choose not to flash your Radio Stack if you satisfy with the existing. Additional, Radio Stack flashing is the main cause of device bricking (the death of your device)
Choose and download your Radio ROM here. Do some research about the Radio ROM that fits you and your country. Recommended the latest 1.56.70.11. Unpack everything and you will see something similar to HardSPL (RUUWrapper). Don't run RUUWrapper this time.
Let's do the safe way. Format your MicroSD card into FAT32 (Kill yourself if you don't know). Then copy the RUU_signed.nbh into your MicroSD. Then rename RUU_signed.nbh to hermimg.nbh. Put your MicroSD into you phone.
Manually put your phone into bootloader mode. Then a different screen with grey background should appear shortly. Press On/Off btn to start flashing. After the process done (it will tell you when it is done, don't try to judge yourself if you feels that 50% is done), soft-reset your phone.
During flashing, put your phone aside and enjoy your coffee. Don't touch it before it ends as this is dangerous. Don't ever fail radio flashing. Careful, careful and careful.
End of this step, you should see R 1.56.70.11 during Windows Boot.
3. Custom ROM Flashing
First, download Dopod 838 Stripped ROM. Then unpack it. Delete your previous hermimg.nbh in MicroSD which you use to flash Radio Stack. Then copy RUU_signed.nbh from Dopod 838 Stripped ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE). This official ROM from Dopod is very important which need to be flashed before you flash your custom ROM.
Then the last step is get your custom ROM loaded. Download custom ROM from this forum (Recommended from TAI_sw or JoshKoss).
Then simply follow the steps in Dopod 838 Stripped ROM Flashing.
(Then copy RUU_signed.nbh from Custom ROM to your MicroSD and rename it to hermimg.nbh. Put your device into booloader and start flashing like how you flash you radio rom. After it done, give your device a Hard-Reset (Hold Left + Right softkey and press Reset. Slide you keyboard then press R and SPACE).)
Yes. I have grammar mistakes. Sorry!
That's your ROM and don't expect every ROM is stable. You will see some bugs in Custom ROM. Post your bugs at their own thread.
Anything just PM me.
Thanks
-Ziv-
Click to expand...
Click to collapse
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
StefanHou said:
Hi Ziv
I have flashed over twenty or more cooked ROM, and they are successfully done through Active Sync. As you see in my signature, My IPL is 1.04 and my SPL is 2.10 Olipro.
I have also followed Ultramag and KK suggestion to format the SDCard using PC. And still stuck in bootloader (3 colors) and one more: it states 'Serial' in the bottom color (white).
I also bought the new 1GB SDCard, but the problem persit.
So, is there any other suggestion to try?
Click to expand...
Click to collapse
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Man, I don't have a clue. The only issue I ever encountered was thinking my card was formatted fat32 when it wasn't.
I think this is now beyond me.
StefanHou said:
Ultramag, KK13, Boog & Zocster
Have tested using SD Converter and formatted it with PC, still no use. In the boot loader screen, I stucked with 'Serial' in the white bar. Is this meaning something to you? Any other work around?
Click to expand...
Click to collapse
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Also check your spelling of hermimg.nbh as a simple error will screw up everything...
Also put sd card in then reset to bootloader, hold in all the buttons - ok, power and reset with stylus, until the bootloader comes up.
Cheers...
KK13 said:
Well now .. you've got me too. I have only had "serial" showing in the boot loader once and it was because I had the wrong sd card in with no HERMIMG file. Once I put the right one in with the file and reset the device it was ok. All I would suggest is to do a Hard reset and follow all the steps again one by one, triple checking everything. Maybe write everything you do down and post it back here.
Click to expand...
Click to collapse
KK13, Boog and Ultramag
OK this is what I did last night:
1. Flashing to the shipped AT&T Stripped ROM
2. Having it reflashed with the HardSPL V7 (to ensure the file is non corrupted, I re-downloaded it from some links in some thread and check the file size, they are all the same )
3. Reformating my SD Card with PC for FAT32;
4. Copy the nbh file and rename it with HERMIMG.nbh (recheck three times and I think I get it right. btw, is there any different to write it in capital? );
5. Press OK and Power, then stick the reset button.
6. Go to the boot loader (with 'Serial' on ht white screen)
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
try to change rom or hard-spl...maybe is rom related
if nothing works i think you have to format your internal memory to do this soft reset then press volume down and the central button of the d-pad and press down..
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
veli4ko said:
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
Click to expand...
Click to collapse
maybe...if changing it doesn't help i think you have bricked your phone...and there is only a solution...bring it back to htc
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
veli4ko said:
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
Click to expand...
Click to collapse
i was meaning bring it back to the service...
veli4ko said:
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
Click to expand...
Click to collapse
Hy veli4ko here is HardSpl
To veli4ko
here is a Stok HardSpl
To veli4ko
1. Solution :
- On smartphone: press volume down and reset simultaneously to get the boot mode. Once you made that follows the instructions on the screen.
2. Solution :
- Possibly you do not succeed the first step to obtain a version of HardSPL Diamond, copy the file there. ROMUpdateUtility.exe nbh and running the phone connected to PC and a loader.
Good luck and more attention next time !
thanks
DjMaryuslive but that won't solve the problem... when i put it in boot mode i saw that i were with hardspl 1.93 and the i swich with stockSPLs_htchackerssign.zip in the ROMUpdateUtility.exe
and then i make hard reset but problem is still there... i don't know what to do... any more ideas
ok, phone was on charge, phone rang, went to answer, phone rebooted!. Left it but it stayed on 02 screen??.. Battery out, reboot - same thing!
Tried going into recovery but again it hangs on the o2 boot screen?
What the hell has happened?????
Was running DeFrost 3.6 with no problems!
Someone please tell me my phone is not kaput!!
First of all, pull off your sdcard.
Tried that - removed sdcard - still same.. o2 boot screen...
Can anyone help me please?? I cant even get into recovery to to a nandroid restore.. everything i try the phone just sits there on the o2 screen... is there a way to reflash an original rom incase i have to send it back???
I just dont undestand why answering the phone on charge i have ended up with a f**cked phone???
So i imagine you can see hboot screen.
You may try to flash a new recovery with unrevoked.
Yes i can see the Hboot screens.. i tried the unrevoked methos but it wont go any further than saying: waiting for device enable usb debugging... as the phone wont startup.
Vicious circle eh.. thanks for quick reply though..
b6rt said:
So i imagine you can see hboot screen.
You may try to flash a new recovery with unrevoked.
Click to expand...
Click to collapse
What i was going to say .... if you cant get to the hboot screen well then bad times indeed
Extreme solution
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
No i CAN get into hboot screen.. i just have no idea as to what to do now???
vivus said:
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
Click to expand...
Click to collapse
Ok, i will lose root but will i be able to use the unrevoked method again??.. or am i completey screwed then as hboot will be too high etc...
I have put my goldcard in.. but just cant do anything
So...the alternative is to have a not working phone. In any case, Unrevoked or not, you should give it a try if you don't have other solutions. But I suggest you to read a lot of threads before you proceed... many similar experiences could help you to understand the procedure.
Yeah agreed.. would rather a working phone.. I have been looking at the bricked threads but they are not so easy to understand.. Appreciate the help though..
wingnutta said:
Ok, i will lose root but will i be able to use the unrevoked method again??.. or am i completey screwed then as hboot will be too high etc...
I have put my goldcard in.. but just cant do anything
Click to expand...
Click to collapse
follow the hboot steps using the .zip file everthing will return to default so then you can use unrevoked to root you phone again #
Edit quoting this -
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
Ok, i am completely stuck now.. I think i can repair the phone but i just have no idea how. I have trawled through bricked threads..just cant find a solution.
I think if i could get usb debugging enabled unrevoked might just work.
Using the cmd tool i can use enableqxdm 0 and it says okay - however unrevoked still does not see it as neither does my pc!
I have no idea how to restore my nandroid without getting into recovery???
I am unsure weather to flash the PB99img.zip as i have a branded phone and i am worried i will completely brick it!
Just so so lost....
Heres a tip though - dont answer your phone when its on charge!!!!
jshields said:
follow the hboot steps using the .zip file everthing will return to default so then you can use unrevoked to root you phone again #
Edit quoting this -
If you can get the Hboot screen, as extreme solution, just copy in your SDcard (root directory)the file PB99IMG.zip or similar (I have no brand phone, maybe O2 requires a different file).
Be carefull, because this method will reset completely your phone. You will loose Root, every data, and you'll come back to the original branded phone.
You can search for this file at:
http://shipped-roms.com/shipped/Bravo/
Download the zip file corresponding to your version and rename it in PB99IMG.zip
Put this file in the root directory of your sdcard, start the device in Hboot mode and it should start automatically!
I hope this can help you.
If anyone more expert has a better solution, please help him
Click to expand...
Click to collapse
Can i use any of the PB99IMG.zips then as it was an o2 branded phone??? Or can i use the update.zip (is this the nandroid backup??) thats already on my sd card - have card reader so can mess about with that no probs..
I have just seen where it checks for the image afetr getting to Hboot so i understand what its looking for now... Question is what image do i use..
Really do appreciate all the help guys
Ok, i tried flashing one of the pb99img and i get a CID error (incorrect). It says this is because goldcard is not present but it is???? Is it because i am using a different standard rom to the one that was on the phone???
I give up for today - i gotta go to work. If i could get USB debugging to work i would probably be ok, but when i do the commands via cmd prompt it says okay but it doesnt seem to do anything!
My goldcard now seems like it doesnt want to be one, thus the cid error..
I am just going round in circles here..
Think i might just throw the damn thing out of a window - Its doing my head in!!!!!
All from answering the poxy phone whilst plugged in!!!!!
wow.. was hoping for a few replies.. guess no one has any ideas.. guess i am buggered then... ok so if i send the phone back to o2 - what is worse case scenario if they do see its flashed??.. will they just charge me for the fix or just not touch it at all??
wingnutta said:
wow.. was hoping for a few replies.. guess no one has any ideas.. guess i am buggered then... ok so if i send the phone back to o2 - what is worse case scenario if they do see its flashed??.. will they just charge me for the fix or just not touch it at all??
Click to expand...
Click to collapse
I would suggest you put your SD card in your computer and verify the content. Or even better, I hope you have a backup of your SD Card after you rooted your phone. I think your partition may have gone, so you can't boot up anymore. Try to format your sd card, partition it with Gpartition or whatever prog you have and copy back the content of your SD Crad back up on your newly formated SD card. It should do the trick. The same happened to me when I changed my 8gb SD Card for a 16gb one.
Good luck and let me know how it works (or not).
forelli, in Darth Sidious mode.
The sd card seems ok in a card reader? I did do a backup a while back but i have a spare sd card so i will try that? Would the sd card problem stop me going into recovery though??? I thought that was phone based and not sd card based??