Develop Bugs

Major problem with new I-Mate ROM. Looking for ideas.

Hi everyone.
I just installed the new rom off of the i-mate ftp, installed it and have run across a major issue. When I try to install some of my basic programs like Agile Messenger or even Total Commander I get a message back saying: "The installation of <filename>.CAB was not successful." Nothing more then that. To get around this I tried installing the default_signed_disablesecurity.cab, but that will not install either. I'm stumped. Anyone here know what the problem is? Oh, i am installing these programs straight from .cab files, not through activesync.

I had a similar problem on previous upgrades when installing to SD card, when the same program was already present. Had to resolve by deleting from the card first.
Could be related.

Nope, just trying to install straight to the device. Don't have an SD card in anyway. I originally tried to install these files from my ext rom, then just from copying the cabs to 'my documents' and running them from there.
The only file I have in my ext rom that I added in that will install is the extrom_unlocker.cab.
*shrug*

try a hard reset (reset + fn1 + fn2) and reset before it start installing the extended rom customization. See if it solves the problem

Imate sp3i
- I have tryed the hard reset on my device but now i can not open it anymore it got stuck I can not open it in Windows or Return to the old modes..
what do i do now ? ( no connection to ActivSync either)
is there any way of installing or patching so it will recover it again !>?
let me know ( [email protected])

RavenGirl said:
Hi everyone.
I just installed the new rom off of the i-mate ftp, installed it and have run across a major issue. When I try to install some of my basic programs like Agile Messenger or even Total Commander I get a message back saying: "The installation of <filename>.CAB was not successful." Nothing more then that. To get around this I tried installing the default_signed_disablesecurity.cab, but that will not install either. I'm stumped. Anyone here know what the problem is? Oh, i am installing these programs straight from .cab files, not through activesync.
Click to expand...
Click to collapse
Are you using SPB Pocket plus software??
If so, un-install it and then install the applications wich you need to install first and then install SPB Pocket Plus at the end.

Re: Imate sp3i
fatosb said:
- I have tryed the hard reset on my device but now i can not open it anymore it got stuck I can not open it in Windows or Return to the old modes..
what do i do now ? ( no connection to ActivSync either)
is there any way of installing or patching so it will recover it again !>?
let me know ( [email protected])
Click to expand...
Click to collapse
Just conncet your device to the computer, and re-flash the rom to the device, don't mind if the computer does not recognize the device, just reflash.... I hope it will work.

khaledelfeki said:
RavenGirl said:
Hi everyone.
Are you using SPB Pocket plus software??
If so, un-install it and then install the applications wich you need to install first and then install SPB Pocket Plus at the end.
Click to expand...
Click to collapse
You're not understanding me. There's nothing to "uninstall." I can't install anything so far. I have everything in .cab format so i could theoretically dump it into my extrom for automatic install. It seems like there's a new security/registry entry that's killing my ability to install unsigned cab files.
Click to expand...
Click to collapse

RavenGirl said:
khaledelfeki said:
RavenGirl said:
Hi everyone.
Sorry for the missunderstanding, I would suggest for you to reflash the ROM again to your device as the installed ROM might be corrupted.
I would suggest also that after reflashing the rom again to your device you should un-install the anti-virus program if you don't need it.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse

In new ROM does anyone install Microsoft .NET Compact Framework 2.0???
I can do it?!?!?!? Error error erro..... please help me
... Sorry i've solved now.
The problem was on photo contact pro active....

what about video calls?¿?
Thanks

Camera is not a valid Pocket PC Application...

Last week I did a hard reset, but since then did not test the camera soft.
The camera is still working as I can use it with QCode. But camera.exe for the camera seems dead. I don't know if it is due to an other software installation since then.
Does someone have an idea to help me that would avoid me loose time redo a hard reset and install applications?

Given the titel you give this "Camera is not a valid Pocket PC Application..." I assume this is the message you are getting?
Can you check if the Camera.exe in /windows is in ROM or not? You can check with programs like Total Commander. If Camera.exe is not in ROM, delete (or rename) it. Also, Camera.lnk should be in ROM. If you delete the non-rom versions, the rom version should appear again (if you have Total Commander set to show ROM files)
If they are in ROM, do you get the message when starting Camera.lnk? Do you get the error when starting Camera.exe directly? Either way, you may need to not only hard-reset, but reflash your ROM as well. Are you using a custom ROM?

thank for your reply, indeed i have only one camera.exe file in the rom. I'll reflash the rom...

I did not flash my HD until now, that's the good time to do it ;-) I suppose that the problem appeared after I installed the Microsoft VB Runtimes for PocketPC.

Odd. If you did not flash yet and are still on factory ROM there is no reason why the build in camera.exe should be corrupted. It may indicate that above hypotheses is false, though I would not see how.
Do try a hard-reset before you reflash. If it is some other problem, like installing VB runtime, it should be gone after a reflash

machina2 said:
thank for your reply, indeed i have only one camera.exe file in the rom. I'll reflash the rom...
Click to expand...
Click to collapse
Just so we do not miscommunicate: You will only ever see one Camera.exe. The question is: Does it have the ROM attribute. If you (or any installer) install another, it will be in flash, and the ROM one gets 'hidden'.
So, do you see it with the ROM attribute, or did you assume because you saw only one that it was in ROM?

Looking at their properties, they are marked as ROM.
I deleted and got : "impossible to delete" . (seems logical if this is rom)

Before I hardreset / flahs phone, just for testing, would someone be able to send me the camera.exe file?

I'd like to help, but that is not so easy, with these devices, not only can you not copy to rom, you also cannot copy from rom. So it would have to be someone who dumped the entire rom on a PC using one of the ROM kitchens.

Ok, I hard reset and the camera works now. i will consciously reinstall my apps checking which one may have cause the problem. I wish it is not one of the games I said were working on the HD.

So I finally found that I was copying a file HTCSensorSDK.dll which caused this problem. mistake from me, I thought it was necessary for the graphic api.

Bluetooth not working

Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?

Bladesharp said:
Hi, my bluetooth does not seem to work on the device. If I reset it i get the error message on start up saying 'BTTRAYCE' is not a vlaid Pocket PC application. Is my unit faulty. I have thought about doing a hard reset on the device but wanted to check with you guys if there is a simple fix, the unit needs replacing? or if the hard reset would work. If I was to do the hard reset what can I use to backup all my contacts with there facebook links etc and will the facebook links still exist?
Click to expand...
Click to collapse
You can use a program called Sprite Backup, although its not free. That will backup a lot of things, but to be honest, its probably best to start from scratch as it backs up all registry changes too, which could be the problem for you.
My bluetooth works fine, what part are you having trouble with?

Bluetooth Issues
I am having the same problem.
I have narrowed it down to tomtom installation (no bluetooth issues until tomtom is installed)
I have tried with TT7 910 9185 as well as TT7 445 and after the reboot the same error occurs.
I have also tried installing it on the memory card, and hard resetting it, however, the TomTom doesn't appear to talk to any Satellites.

I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.

rb14 said:
I installed Tomtom 7.910.9185 and it says "Unable to start. Not enough memory" or similar. I installed it from cab on my 8GB Storage Card in the same way that worked perfectly on my Raphael.
The point of telling you that is my bluetooth is still working perfectly.
As for you Bladesharp, surely if you Activesync all the relevant links and details will remain with your contacts? I'd say a hard reset will determine if it's a hardware issue.
Click to expand...
Click to collapse
I'm on 7.915 for TomTom and don't have the issue.
Links to Facebook won't transfer with Active Sync, they are stored somewhere seperately on the phone and are not part of the Contacts program in pOutlook.exe, they are part of Manila which is not transferable. Not sure where it is stored, have been looking now for about 2 months

I came across something similar to this last week after installing TomTom from a CAB, and found this post on a related issue...
http://www.noeman.org/gsm/trash-section/65951-tomtom-7-bluetooth-problems-sorted.html
I deleted the two bluetooth files (BtSdKCE30.dll & BtCoreIF.dll) from the TomTom CAB as described, did a hard reset and reinstalled, and haven't had the problem since. Could be the same issue?

Could someone who has not installed TomTom please post the dates of their BtCoreIf.dll & BtSdkCE30.dll? Mine are both 04/24/08 20:10.
Does anyone know if it is possible to revert to the ROM version of these files WITHOUT doing a hard reset?
If some kind person was able to provide me with the ROM version, can I just overwrite the ones in RAM?
R

These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)

Sounds the same as my thread
http://forum.xda-developers.com/showthread.php?t=522373
someone already tried the above files? will it correct the problem?

Thanks for the files.
I am happy to confirm that installing the two DLLs gets BTTrayCE.exe working again.
I just renamed the 04/24/08 versions to .was and use Total Commander to copy the files from my storage card to \Windows and rebooted the phone... ActiveSync wouldn't let me copy them directly from my PC as it said there was already a 05/14/09 version there and it was read-only!
As it rebooted, it complained that BtCoreIf.dll was from an unknown supplier but I just OK'd that and everything is fine. Bluetooth & TTN working.
R.
PS Didn't need to copy BTTrayCE.exe as this had not been overwritted.

Ah, thanks for letting me know. I wasn't sure if the exe was also needed, I only included it since one of the symptoms I was getting was that this wasn't a valid executable; but I guess that was just caused by the corruption of the dll's.

I don't think the DLLs are corrupted, just an earlier version.
Just like the bad old days of Windows 3.1 where installing one package would break others due the installing of different versions common DLLs. Gosh, I feel old!
R.

dicko99 said:
I don't think the DLLs are corrupted, just an earlier version.
Click to expand...
Click to collapse
Ah yes; that makes more sense! I still had a boot delay even with the files from the most recent TomTom version I could find.

Hi there,
i had the same Problem with TT. In my case I also copyed the BTTrayCE.exe. Now I dont get any error anymore but the Bluetooth can still not be started. Can somebody please upload the Original BTTrayCE.exe. Thank you
I did a reset of my Swisscom German Device. Copyed the 3 BT Files and installed the TT7 v7.910.9185 again. After restart of my Device the same BT Error. I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"

zizzo
Thanks guys a lot. Rewriting those two files solve the problem. Bluetooth works now.

ianjd said:
These came from my device's \Windows directory, and are dated 14th May. I think they are unaffected by this problem, certainly I don't get the boot delay or BTTray boot crash that seem to be the possible symptoms of this. (Use caution, of course; backup what you can before tinkering in case of disaster.)
Click to expand...
Click to collapse
Thanking you very much kind sir. I unzipped these files directly to my storage card in USB mode and just double clicked the exe file and it fixed my bluetooth up for me. (good job as I am a technical biff when things get registry level)
EDIT sorry I thought it did but it didn't just fix it by double clicking the exe. I've hard reset now as I don't really know what I am doing

As said in the thread here:
http://forum.xda-developers.com/showthread.php?t=522373&page=4
There is no need to replace the two files.
Just delete them and soft reset. They will be replaced with the two right ones.

Bluetooth problem with TomTom resolved!
matrixis2day said:
I replayced the 3 Files with my Original ones and restarted again. New Error comes up "Bluetooth Stack can not be started"
Click to expand...
Click to collapse
I had the same and here's what I just discovered and what worked:
I removed the files and expected them to be replaced upon restart. When I checked I noticed a file in the \Windows directory named BtSdKCE50.dll - I had not noticed this before. I (re)moved this, rebooted again and now Bluetooth and FM Radio (!) are working, yay!
hth,
TA2

This fixed my problem. Couldnt delete the old files but copied the replacements over the top and that sorted it. My version of Tom Tom wont work stil but it is 7.5 I think.

I've had exactly the same problem I've tried overwriting the dll's with the files provided in this thread,
Now whilst I don't get the error message, when I try and enable bluetooth, I get "cannot start bluetooth stack" error
Any ideas peeps?

how to remove BtSdkCE30.dll BtCoreIf.dll???

Hi guys,
I am new here, so sorry if these two questions are obvious to everybody on this forum. I installed tt7 on my rhodium and modified BtSdkCE30.dll BtCoreIf.dll: no more bluetooth. Read the forum and figure out they need to be removed. Thus, I tried to delete, move and rename them to no avail. They are write protected and none I tried worked. So, please how do I remove them for good? Is there a way? Second question, when people are talking about hard reset on this forum they mean really reinstalling the OS?
Thanks
Max

mm148881 said:
Hi guys,
I am new here, so sorry if these two questions are obvious to everybody on this forum. I installed tt7 on my rhodium and modified BtSdkCE30.dll BtCoreIf.dll: no more bluetooth. Read the forum and figure out they need to be removed. Thus, I tried to delete, move and rename them to no avail. They are write protected and none I tried worked. So, please how do I remove them for good? Is there a way? Second question, when people are talking about hard reset on this forum they mean really reinstalling the OS?
Thanks
Max
Click to expand...
Click to collapse
Simple answer uninstall tomtom then restart the phone then you will still have the files but the good ones tomtom writes new ones that dont work with this phone so when your done installing tomtom install this one and you are all set
ttn7.916.9189_original_patched 4 tilt2 TouchPro2_1.cab
then check your bluetooth should be working

Hi
give them a other name works also.

mm148881 said:
Hi guys,
I am new here,
>snip<
Second question, when people are talking about hard reset on this forum they mean really reinstalling the OS?
Thanks
Max
Click to expand...
Click to collapse
A hard reset will reinstall the OS and wipe any of your registry changes, software installs and data stored in your internal memory. It's not the same as upgrading or installing a new OS though.

jaaphooi said:
Hi
give them a other name works also.
Click to expand...
Click to collapse
Yes but they will still be there taking up space that can be used for other files
pounderd said:
A hard reset will reinstall the OS and wipe any of your registry changes, software installs and data stored in your internal memory. It's not the same as upgrading or installing a new OS though.
Click to expand...
Click to collapse
and as for the hard reset to much time and trouble for something that can be deleted. or removed easily

The two .dll's are write protected on my tp2 !!!
Actually, I had to do a hard reset. No way I could remove or rename those two files. After the hard reset, I restored a previous backup - done before I installed tomtom. Finally, I modified the tt7 .cab file with WinCE CAB manager to remove the two nasty .dll's and reinstalled. Now, everything works ok.
Thanks
Max

I got the same problem.
I installed the WinCE Cab Manager and try to modify the TT7.cab file.
How to do it? I didn't see the 2 files!
Please help!!

diamond problem help!!!!

hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!

try to change rom or hard-spl...maybe is rom related
if nothing works i think you have to format your internal memory to do this soft reset then press volume down and the central button of the d-pad and press down..

i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???

veli4ko said:
i use several roms after the problem i will try to use different hard spl
I format the memory storage several times but that won't solve the problem either...
Do you think that this comes from the spl???
Click to expand...
Click to collapse
maybe...if changing it doesn't help i think you have bricked your phone...and there is only a solution...bring it back to htc

what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!

veli4ko said:
what do you mean to put the original rom from htc...
or to send the diamond up to service...
I can't understand that: when i put something in the memory storage won't do anything but when i cut it into the main memory it's ok..????!!!!
Click to expand...
Click to collapse
i was meaning bring it back to the service...

veli4ko said:
hello guys i'm a huge fan of all the work and help that i can get from this forum so i'm asking again for help.
After i flash my diamond with custom rom he develope a problem.
I use all the steps the mtty and everything but when i put anything in my memory storage it can't be played it can't be opened it won't do anything
If i try to play a file it says that the file is corrupted... if i try to instal something it says the instalation is unsucsessfull and soo on...
So can you help me to fix my memory storage... I flash it clear it but nothing works...
Please hepl!!!
Click to expand...
Click to collapse
Hy veli4ko here is HardSpl

To veli4ko
here is a Stok HardSpl

To veli4ko
1. Solution :
- On smartphone: press volume down and reset simultaneously to get the boot mode. Once you made that follows the instructions on the screen.
2. Solution :
- Possibly you do not succeed the first step to obtain a version of HardSPL Diamond, copy the file there. ROMUpdateUtility.exe nbh and running the phone connected to PC and a loader.
Good luck and more attention next time !

thanks
DjMaryuslive but that won't solve the problem... when i put it in boot mode i saw that i were with hardspl 1.93 and the i swich with stockSPLs_htchackerssign.zip in the ROMUpdateUtility.exe
and then i make hard reset but problem is still there... i don't know what to do... any more ideas