Hi,
I tried to load a HardSPL on my Diamond but it went wrong somehow.
My Diamond was stuck at 75% and everything went blank.
Now I can't power it up and even if I put in the power supply doesn't lid up the light of charging.
Is it dead? Can I throw it away? Or is there something I can do ?
THX
may sound stupid but have you tried to remove the battery
Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
karlanal said:
may sound stupid but have you tried to remove the battery
Click to expand...
Click to collapse
Yes nothing
nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
Nope, nothing
solidpowder said:
Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
Click to expand...
Click to collapse
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.
lmdiablo said:
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.
Click to expand...
Click to collapse
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?
solidpowder said:
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?
Click to expand...
Click to collapse
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5
lmdiablo said:
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5
Click to expand...
Click to collapse
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader
solidpowder said:
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader
Click to expand...
Click to collapse
Nope didn't work, Battery was out for 6 hours...
So has anyone any a good tip or should I trough it in the garbage
can you try with an other battery cell ?
solidpowder said:
can you try with an other battery cell ?
Click to expand...
Click to collapse
Already did, my friend has the same device.
Still doesn't do anything.
It's really dead.
nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
lmdiablo said:
Nope, nothing
Click to expand...
Click to collapse
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?
ciao99 said:
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?
Click to expand...
Click to collapse
No, it doesn't do anything.
No power up
Doesn't charge.
Nothing.
How old is your device? Diamond was launched in may 2008 so a big change it isn't older then 2 years. In europe HTC devices come standard with a 24 months warranty.
You could send it in for repair in that case, and since the device isn't booting at all, the changes HTC detects that it died during a 'warranty destroying' procedure are not that big. And if they do they will contact you prior to actual repairing/making costs.
Before throwing it away you could give this a try, nothing to loose huh?
Related
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?
any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.
bootrecord said:
any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.
Click to expand...
Click to collapse
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.
roloracer said:
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.
Click to expand...
Click to collapse
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway
bootrecord said:
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway
Click to expand...
Click to collapse
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0
roloracer said:
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0
Click to expand...
Click to collapse
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??
bootrecord said:
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??
Click to expand...
Click to collapse
Take your battery out for a bit and try again "not promissing anything but sometimes can help"
stylez said:
Take your battery out for a bit and try again "not promissing anything but sometimes can help"
Click to expand...
Click to collapse
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.
bootrecord said:
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.
Click to expand...
Click to collapse
sorry it sounds like you have a fancy paper weight! Bricked!!
hi to all
today i've flash a rom from internal storage
when the screen on my diamond say "UPDATE COMPLETE" or a things similar
i soft reset the phone
but now my diamond won't turn on and it didn't charge!!!
what i can do?
i brick my diamond?
pls help me!!!
Try to boot your device in bootloader mode and repeat the flash
SubSeven93 said:
Try to boot your device in bootloader mode and repeat the flash
Click to expand...
Click to collapse
the phone won't turn on!!!
this is the problem!!!
did you use hard-spl before flashing any custom Rom??
Mondea said:
did you use hard-spl before flashing any custom Rom??
Click to expand...
Click to collapse
ouppss sorry didnt know you are a chef!!
Mondea said:
ouppss sorry didnt know you are a chef!!
Click to expand...
Click to collapse
don't worry
but i would know because my diamond is dead
i do the rom upgrade from internal storage in the right mode!!!
battery?
if u can - try another battery and give it a try... it might be a faulty/dead battery...
if the phone is dead, and the battery is dead... it won't charge unfortunately...
good luck
cloudedhopes said:
if u can - try another battery and give it a try... it might be a faulty/dead battery...
if the phone is dead, and the battery is dead... it won't charge unfortunately...
good luck
Click to expand...
Click to collapse
i've tried another battery but without success
Fu$K...
That sucks...maybe you should try and take it to waranty...tell them that one day you presed the power button to turn on the display..and nothing...you turned it off..removed the batery..and still nothing..they have to fix it...or change it ...BEST OF LUCK
john_x said:
That sucks...maybe you should try and take it to waranty...tell them that one day you presed the power button to turn on the display..and nothing...you turned it off..removed the batery..and still nothing..they have to fix it...or change it ...BEST OF LUCK
Click to expand...
Click to collapse
i think there's no warranty because i install hard-spl and my custom rom
just bring it to a service centre
most technicians at the service centers wont even bother to check the software... just bring your purchase receipt the whole ****ing box. tell them it was not turning on after a full nights worth of charging and you have not install any third party apps.
i think there's a hardware failure and even the techs at the service centre wont even know because the the phone is an absolute brick now...
play the symphaty card. use your warranty.
I not sure but maybe you can try;
takeout your battery,
press and hold the reset,
and now insert back your battery.
goodluck
connect to main power supply and leave 5 mins to charge... try to boot...
just an idea...
Hi guys,
Can anyone help me here ?
When I try to start up my Phone, it always loads the bootloader ...
I tried running reflashing a rom and task29, but no help there :s
Does anyone have an idea what to try ?
Tnx
Nick
Some people with the same problem said that their batterie was broken. Can you try another batterie?
I'll give it a try
Will let you know ...
Lennyz1988 said:
Some people with the same problem said that their batterie was broken. Can you try another batterie?
Click to expand...
Click to collapse
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Trickass said:
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Click to expand...
Click to collapse
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
MCbrian said:
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
Click to expand...
Click to collapse
No, I'm not doing that
I thought maybe it got stuck though, something like that :s but when I do press it, I hear a pretty clear "click", so I guess it's not broken at all...
Also, I noticed that when I try to reflash a ROM, the "current image" (or whatever it's called) is blank ...
(I mean the thing that sais the version number of the currently installed rom)
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Same issues.
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
ultramag69 said:
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Click to expand...
Click to collapse
Lol yeah I know that
Thanks anyway
Frederic.james said:
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
Click to expand...
Click to collapse
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Trickass said:
Lol yeah I know that
Thanks anyway
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Click to expand...
Click to collapse
Hummm i have see somwhere a howto for mtty on W7... but i'm a little lazy i have choose to do this on a old windows xp
But this command are just temporary i'm searching for something more stable !
Some news from my Rhodium Stuck in bootloader
I have try to Hardspl it (Olinex 0.85)
The good news is i have manage to do it, the bad news is after that even the
set 14 0
don't manage to make it boot.
After a while searching, (thanks wiki of another phone) i have find those command :
password BsaD5SeoA
set 14 0 # Maybe it's usless now but in fact i don't know
set 1 0
task 8
And now i'm back to my start....
I tried using the MTTY commands, and when I did it the first time, the phone booted and performed its "first run setup" thing.
After rebooting though, it went back to the tricolor screen, and I can't get past it anymore, even with the same MTTY commands ...
Any other ideas ? :/
mtty, a lot of post on the internet...
hi,
I think we are a the same point !
I have find a way to start a boot with the HTC screen but the phone tel me that a txt file is missing on the sd card ???!!!???
with mtty :
boot
yes it's quite simple why i haven't think of that befor i don't know... but that didn't solve my problem at all.
I have send a mail to HTC in order to have a diferent point of view but all they said to me is doing a hard reset (who didn't do anything...)
I will post the avancement of my test but i feel a little stuck.
Note : After searchin on the internet, the set 14 0 tel to the phone to boot on the os after a flash (sometime the phone don't reconize the end of flash)
the set 16 0 (or set 16 1) disable (or enable) the RUUNBH tag on boot loader.
More Infos...
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Frederic.james said:
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Click to expand...
Click to collapse
Oke, I will try to take out the battery tomorrow as well ... Although, I tried using a different battery and it didn't help ...
Right now, I managed to boot using mtty set 14 0 > task 8, which seems to work
(sometimes, I need to do the task 8 twice in a row ...)
So as of now, I managed to flash a stock rom onto the phone, and only have to try and reset hardspl back to stock as well.
Waranty here I come ...
lol mine is out of waranty, and it's the solution i ve find everywhere !
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
PUTALE said:
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
Click to expand...
Click to collapse
yes, i've try it (HTC has send me the same advise) and... same issue !
In order to done the hard reset (who didn't execute when the phone is to boot in bootloader) i have do a set 14 0 and reset with power and holding the two call hang and power.
But thanks for the advise !
Frederic.james said:
lol mine is out of waranty, and it's the solution i ve find everywhere !
Click to expand...
Click to collapse
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Trickass said:
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Click to expand...
Click to collapse
Hum it's the phone of a firend who give it to me... and he has buy it on e-bay.... for the waranty sound difficult to retreive a bill and... I will search till i find something to do
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
droid_ilari said:
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
Click to expand...
Click to collapse
Tried it but that did not help.
Thanks for the reply. Keep helping please.
MightMouse said:
Tried it but that did not help.
Thanks for the reply. Keep helping please.
Click to expand...
Click to collapse
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
JJeamy said:
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
Click to expand...
Click to collapse
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
MightMouse said:
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
Click to expand...
Click to collapse
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
MightMouse said:
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Click to expand...
Click to collapse
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Orion174 said:
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Click to expand...
Click to collapse
I did that.
It did not work.
MightMouse said:
I did that.
It did not work.
Click to expand...
Click to collapse
Does your phone vibrate (4x or 7x) when you turn it on?
It vibrates ones when showing the HTC startup logo.
I am gonna try
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
Click to expand...
Click to collapse
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
the problem is you must find a 3rd party phone services placed on your country that are already have a riffbox or jtag hardware to flashing your phone from the beginning..
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
I cannot try this, because I dont have a RIFF box. This is hardware.
MightMouse said:
I cannot try this, because I dont have a RIFF box. This is hardware.
Click to expand...
Click to collapse
yap..RIFFBOX is a flashing hardware..
yes i know..if you already broken your phone cause of changing software by your self..htc will not recover your phone under they warranty
you already had loosing your phone warranty.. but i think that's not mean they can't help and fix your phone..off course without warranty (if they already know or detected that you already fault your warranty) then they will charge you with some of cost..
if so..with the hope of luck..then you can try brought your phone to the htc service center..then let they're analyst your phone and make decision about your valid warranty..who knows you already lucky then they don't know what are you already do it previously to that phone..
note : this all mean that's if your DHD is still recover under warranty by time..right..
hopefully your DHD will fixed soon..and good luck..