Develop Bugs

Can someone help me with SX66

guys i need some help with my sx 66, after doing a soft reset it never came back on. I doesnt even connect to pc using cradle. once i hit the power button it comes the bootup screen and get stuck there. Can some plz help me with this problem

Have you tried a hard reset? Hope you've made a backup :wink:

Have you tried a hard reset? Hope you've made a backup :wink:

reset
yeah i tired hard reset too, but it still doesnt work.....

take the battery off and leave of for about an hour or so, so the back up battery completely runs dry... then try again.

i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????

at this point in time i say you opt for the warranty

daonly said:
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
Click to expand...
Click to collapse
BigDamHero said:
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
Click to expand...
Click to collapse
When you get to the Bootloader screen, probably you are home free. Just use the above link to resolve you problem.
If it doesn't work, let me know as I need some parts for mine and may be interested in buying yours for the parts.

help ... xda exec won't start after rom flashing

somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...

Which ROM did u reflashed ?

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!

Have u tried reflashing it again via bootloader mode ?

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)

Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!

U shld better get it replaced .

niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.

niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.

still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..

trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks

blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....

I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working

This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back

HELP ... Bootloader Screen is all I get

I flashed my phone a couple of weeks ago with Schaps 4.31 Rom. It has been working a treat ! This is the first time I flashed a phone and I followed MR.Vanx instructions.
All was working fine untill yesterday. I had my 3rd freeze of the day. Oh well I thought, thats 3 in 2 weeks never mind must just be having a bad day.
It got worse. I soft reset my phone and now all I get is the Olipro bootloader 3 colour screen ! So I took the battery out and left it for 2 hrs. Still the same.
Whats wrong with it ?
Does this happen like that ?
Can I recover or do I need to flash again or is this permanent ?
HELP HELP HELP

Anyone know ? Phoen still not working. Can someone help ?

http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick

dan1967 said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Click to expand...
Click to collapse
<Sarcasm mode> Thanks. Like I never thought to look there. </Sarcasm mode>
I was more interested in the other questions I asked ... IE is this normal after 2 weeks operation ? etc

no, shouldnt happen like that. try putting the .nbh file on a sd card after formatting fat 32. rename to hermimg.nbh then put in phone. if you're in bootloader it should automatically start the flash. this should get you out of bootloader and back into windows. make sur ebattery is more than 50% by putting on to charge for awhile first. hope this helps. Cheers.

Thanks for the response.
I think I can do it via USB as usual I am just waiting for the phone to charge a bit first. Obviously with no OS I have no idea how much battery % it has !! DOH !
Oh well I will post back for those interested once I know if it is goign to work or not !

Previously been stuck on bootloader before, and I just flashed a different ROM via USB. This worked fine for me. Would also try what ultramag69 said previously

Suggested sd as this has become my favourite way of flashing. No chance of NASTY accidents like computer resets, someone unplugging usb or other little things t5hat seem to happen to people as they flash there precious hermes. Sorry if this sounds like a hard sell but I really believe this is the safest way to flash your device. I've even flashed below 50%... Plugged in power. Was in a rush and had no time. Its never failed while I have had bricks and glitches with the usb. And thats my two cents......

Well it just gets stranger, I waited untill the phone was fully charged. It was plugged in to PC via usb swtiched off so I could see the charge light go green. When I switched the phone on with USB connected to go to bootloader screen to reflash, it booted windows !
Its now working fine ! I did nothing except charge it.
How very dare it !

Suggest you check the device for bad blocks.
Put the device into bootloader, start mtty.exe
connect to USB and run the command "Info 8".....this will report if the device has bad blocks (three should turn up even on a normal device).
then run "task 2a" to fix any bad blocks that are evident.
It might be worth flashing a new ROM to it to overwrite any corrupted sectors, just as a precautionary measure?

Have you tried hard resetting the device by holding the 2 left and right buttons (below the screen) and then reseting with the stylus?
This will then ask if you want to reset to factory..or if you have a cooked ROM reset back to the cooked ROM?
Helped me out and then promptly re-ROM'd the thing...
Hope this helps.....

ultramag69 said:
no, shouldnt happen like that. try putting the .nbh file on a sd card after formatting fat 32. rename to hermimg.nbh then put in phone. if you're in bootloader it should automatically start the flash. this should get you out of bootloader and back into windows. make sur ebattery is more than 50% by putting on to charge for awhile first. hope this helps. Cheers.
Click to expand...
Click to collapse
Ok had a problem today JASJAM seemed to loose phone reception has done this before , since I had the offical Telstra ROM on there for some time thought I would re-install , however stopped at 12% then was stuck on bootloader, tried the SD card method above get through the IPL , BOOTLOADER SPLASH 1&2 and EXTROM but seems to stay on GSM in the list any ideas as to what the problem maybe?

You need to loas SPL 1.01 MFG, then connect using MTTY.EXE.
after issueing:
USB>task 32 (you will get)
Level = 0 (now issue)
USB>set 14 0
USB>task 8
p.s. if you have other than SPL 1.01 MFG, you may need to use set 16 0 or other value. Do search.
Now the device should boot, if it does not:
Press the soft keys (the ones below CONTACTS and CALENDAR) together with the RESET. The device should go through installing windows procedure.
Good luck.
Simple.

I give in

I have searched the internet high and low - found many threads in many forums about the O2 XDA IIs being stuck on boot screen and wont hard reset and NO, I mean NOT a single solution posted anywhere despite the numbers of people with exactly the same problem as me.
It will enter boot loader mode and will flash with WM5 or 6 but neither have working camera or sound.
I have flashed it with Ship versions of O2 and even T-Mobile roms but both freeze at the boot screen and wont do anything else, pressing the usual buttons to get it to hard reset don't work.
So unless anyone can help me either restore the factory rom and solve the frozen boot screen or fix the sound / camera I am going to smash it to little pieces and throw it in the bin.

arcnet said:
So unless anyone can help me either restore the factory rom and solve the frozen boot screen or fix the sound / camera I am going to smash it to little pieces and throw it in the bin.
Click to expand...
Click to collapse
Don't do that, tell me the cost and post it to me. I can use the spare parts.
Seriously, what have you tried so far? (I missed the earlier posts).
Are you getting stuck at the four colour boot screen, or at the WM splash screen?

Thanks for the reply Jdc - lol - for a second I thought you were serious about the parts.
I have tried sooo much with this thing I cant remember what I haven't tried now. But to recap when I first got the Xda IIs it was locked to O2 and stuck on the boot screen with the O2 logo and the red writing in bottom left corner showing rom version. Nothing seems to shift from this state, no reset hard or soft makes any difference - take out the battery and when put back in and powered up sticks at the boot screen.
However - I can get it into bootloader mode and merrily flash WM5 or 6 which appear to work perfectly but there is no sound whatsoever and the camera says it fails to initialize the hardware please reset.
I then reflashed it with an O2 stock Ship rom - presumably WM2003 and it is exactly as it was at the start - stuck on the boot screen showing the O2 logo and rom versions.
I even tried a T-Mobile ship rom of the same version and it stuck on the T mobile boot screen.
Arrrgh!!!! I am at my wits end with it - maybe it is faulty somehow and this is not a software fault - I wish there was some diagnostic I could run on it and find out.
I currently have WM6.11 running well but as I said with no sound or camera.
Hope you can suggest something I may have overlooked or done wrong - I am new to this and it is very possible I have missed something.

arcnet said:
Thanks for the reply Jdc - lol - for a second I thought you were serious about the parts.
Click to expand...
Click to collapse
Well, I am, kind of. I have an XDA IIs as well that needs some replacement parts, so if you are going to smash the thing, I'll pay the post to send it my way.
Anyway...
arcnet said:
I have tried sooo much with this thing I cant remember what I haven't tried now. But to recap when I first got the Xda IIs it was locked to O2 and stuck on the boot screen with the O2 logo and the red writing in bottom left corner showing rom version. Nothing seems to shift from this state, no reset hard or soft makes any difference - take out the battery and when put back in and powered up sticks at the boot screen.
Click to expand...
Click to collapse
Hrm...
When it is stuck the boot screen, what does the R, G and D lines show? I'm wondering if the radio ROM might be buggered up. However, you do say that it's working... mostly...
arcnet said:
However - I can get it into bootloader mode and merrily flash WM5 or 6 which appear to work perfectly but there is no sound whatsoever and the camera says it fails to initialize the hardware please reset.
Click to expand...
Click to collapse
No sound... As in playing a sound file with WMP doesn't even produce anything?
Can you use it as a phone normally?
Have you opened it up to see if the camera and speaker(s) are loose?
One other thing to try, if you don't mind doing another hard reset:
1. Download mtty v1.42
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001 (If you only see COM 1 and COM 2, try unplugging the USB and replugging it)
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.

The wierdest thing happened.
Have to say that none of the suggestions or ideas (though welcome) helped. I reflashed the WM6.1 after flashing latest radio rom. Still no sound and camera.
Last night I had kept the battery out for a few hours and then on replacing it had to do reset - hey presto after all this time the sound worked and so does the camera.???? I have absolutely no idea what I did to fix it - almost as if it needed resetting a few times - cant think what else I have done.
Anyway I am happy bunny now - it all seems to be working perfectly.

Excellent! Glad that it's working for you now, hopefully it stays working as well.
If it doesn't, don't bin it, PM me and we can talk.

Lol - sorry Jdc but i wont be parting with it now - it all works perfectly even the phone is superb now which just goes to show that even when it looks like a hardware fault it is often software - a typical PC in other words.
Cheers

arcnet said:
Lol - sorry Jdc but i wont be parting with it now
Click to expand...
Click to collapse
Well bugger. No worries, glad it's working for you.
arcnet said:
it all works perfectly even the phone is superb now which just goes to show that even when it looks like a hardware fault it is often software - a typical PC in other words.
Cheers
Click to expand...
Click to collapse
Well, a typical windows machine. My UNIX and Mac's rarely go and burble to themselves like my windows machines do at times.

[Q] Flashed CMDA Hard SPL to a GSM Diamond

MOD EDIT: Can you help, I flashed my GSM diamond with the CDMA hard SPL from PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=36062
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx

Please post in the thread where you got it from!
You'll get an answer, and there will be fewer threads lying around here!

i don't understand what do u mean by this ?

now i use solution from
http://forum.ppcgeeks.com/showthread.php?t=36062
after write rom my htc is totaly dead can't power on
any solution to recover it

hbstun said:
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Click to expand...
Click to collapse
He means you should ask in the thread where you found this information above.
Code:
First and foremost...

ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?

hbstun said:
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
Click to expand...
Click to collapse
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.

When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.

aE3-ink said:
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
Click to expand...
Click to collapse
nothing hen i put usb cable nothing in the screen

Kevbodian said:
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
Click to expand...
Click to collapse
what do u mean by jtag and how i can do it ?

<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave

Serves you right for using a leaked unlocker program - Should have gone here . thanks to Olipro as the leaked version was buggy.
I do hope you get this fixed though. (I would help if I could really).

DaveShaw said:
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Click to expand...
Click to collapse
can't enter bootloader ?

hbstun said:
can't enter bootloader ?
Click to expand...
Click to collapse
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave

DaveShaw said:
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
Click to expand...
Click to collapse
ok thx anyway for your help

R3PUBL1K said:
Serves you right for using a leaked unlocker program - no sympathy or help from me.
Should have gone here thanks to Olipro as the leaked version was buggy
Click to expand...
Click to collapse
I think he tried the unlock before he flashed the cdma hardspl.

Kevbodian said:
I think he tried the unlock before he flashed the cdma hardspl.
Click to expand...
Click to collapse
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead

You must eter in "USB Trigger Mode"
hbstun said:
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
Click to expand...
Click to collapse
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...

kokocf said:
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
Click to expand...
Click to collapse
can't enter bootloader like u sad !

hbstun said:
can't enter bootloader like u sad !
Click to expand...
Click to collapse
Hello there! Where have you blocked, exactly ...?