hi to all
today i've flash a rom from internal storage
when the screen on my diamond say "UPDATE COMPLETE" or a things similar
i soft reset the phone
but now my diamond won't turn on and it didn't charge!!!
what i can do?
i brick my diamond?
pls help me!!!
Try to boot your device in bootloader mode and repeat the flash
SubSeven93 said:
Try to boot your device in bootloader mode and repeat the flash
Click to expand...
Click to collapse
the phone won't turn on!!!
this is the problem!!!
did you use hard-spl before flashing any custom Rom??
Mondea said:
did you use hard-spl before flashing any custom Rom??
Click to expand...
Click to collapse
ouppss sorry didnt know you are a chef!!
Mondea said:
ouppss sorry didnt know you are a chef!!
Click to expand...
Click to collapse
don't worry
but i would know because my diamond is dead
i do the rom upgrade from internal storage in the right mode!!!
battery?
if u can - try another battery and give it a try... it might be a faulty/dead battery...
if the phone is dead, and the battery is dead... it won't charge unfortunately...
good luck
cloudedhopes said:
if u can - try another battery and give it a try... it might be a faulty/dead battery...
if the phone is dead, and the battery is dead... it won't charge unfortunately...
good luck
Click to expand...
Click to collapse
i've tried another battery but without success
Fu$K...
That sucks...maybe you should try and take it to waranty...tell them that one day you presed the power button to turn on the display..and nothing...you turned it off..removed the batery..and still nothing..they have to fix it...or change it ...BEST OF LUCK
john_x said:
That sucks...maybe you should try and take it to waranty...tell them that one day you presed the power button to turn on the display..and nothing...you turned it off..removed the batery..and still nothing..they have to fix it...or change it ...BEST OF LUCK
Click to expand...
Click to collapse
i think there's no warranty because i install hard-spl and my custom rom
just bring it to a service centre
most technicians at the service centers wont even bother to check the software... just bring your purchase receipt the whole ****ing box. tell them it was not turning on after a full nights worth of charging and you have not install any third party apps.
i think there's a hardware failure and even the techs at the service centre wont even know because the the phone is an absolute brick now...
play the symphaty card. use your warranty.
I not sure but maybe you can try;
takeout your battery,
press and hold the reset,
and now insert back your battery.
goodluck
connect to main power supply and leave 5 mins to charge... try to boot...
just an idea...
Related
guys i need some help with my sx 66, after doing a soft reset it never came back on. I doesnt even connect to pc using cradle. once i hit the power button it comes the bootup screen and get stuck there. Can some plz help me with this problem
Have you tried a hard reset? Hope you've made a backup :wink:
Have you tried a hard reset? Hope you've made a backup :wink:
reset
yeah i tired hard reset too, but it still doesnt work.....
take the battery off and leave of for about an hour or so, so the back up battery completely runs dry... then try again.
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
at this point in time i say you opt for the warranty
daonly said:
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
Click to expand...
Click to collapse
BigDamHero said:
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
Click to expand...
Click to collapse
When you get to the Bootloader screen, probably you are home free. Just use the above link to resolve you problem.
If it doesn't work, let me know as I need some parts for mine and may be interested in buying yours for the parts.
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?
any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.
bootrecord said:
any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.
Click to expand...
Click to collapse
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.
roloracer said:
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.
Click to expand...
Click to collapse
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway
bootrecord said:
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway
Click to expand...
Click to collapse
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0
roloracer said:
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0
Click to expand...
Click to collapse
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??
bootrecord said:
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??
Click to expand...
Click to collapse
Take your battery out for a bit and try again "not promissing anything but sometimes can help"
stylez said:
Take your battery out for a bit and try again "not promissing anything but sometimes can help"
Click to expand...
Click to collapse
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.
bootrecord said:
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.
Click to expand...
Click to collapse
sorry it sounds like you have a fancy paper weight! Bricked!!
So, i tried changing my roms from Paranoid Android to myonev 9.5
And i knew i had to flash boot.img but then i thought I'd do it after flashing the rom (sorry im a noob) which happened to be a graaaaaave mistake
Now my phone doesnt switch on to bootloader nor does it show the charging LED!'
I have a primoU device. Ive googled aroud and found out that it could be a hard brick and the only way is to give it to a service centre..
But the problem there is i live in INDIA and we dont have much service centres here, the closest one is around 400kms from my home :/
So i wanna really make sure that is it worth travelling all those miles..
PLUS, My warranty expired 2 months back :crying:
I wish somebody helps me here, i will do ANYTHINGGG
fznnsr said:
So, i tried changing my roms from Paranoid Android to myonev 9.5
And i knew i had to flash boot.img but then i thought I'd do it after flashing the rom (sorry im a noob) which happened to be a graaaaaave mistake
Now my phone doesnt switch on to bootloader nor does it show the charging LED!'
I have a primoU device. Ive googled aroud and found out that it could be a hard brick and the only way is to give it to a service centre..
But the problem there is i live in INDIA and we dont have much service centres here, the closest one is around 400kms from my home :/
So i wanna really make sure that is it worth travelling all those miles..
PLUS, My warranty expired 2 months back :crying:
I wish somebody helps me here, i will do ANYTHINGGG
Click to expand...
Click to collapse
Try reverting to stock with a stock backup you'll find that on xda ... of your phones not booting into bootloader manually try using the all in one kit..it should have such an option although i didn't try this... If u can boot in bootloader then there's 99.9% chance that ur phone will come back to live
hold your power button until the screen goes off
then hold down your volume down button until u boot into bootloader
if it doesnt boot, try and try again
if u can boot into bootloader, the rest is easy
Pranav Sharma (PS) said:
Try reverting to stock with a stock backup you'll find that on xda ... of your phones not booting into bootloader manually try using the all in one kit..it should have such an option although i didn't try this... If u can boot in bootloader then there's 99.9% chance that ur phone will come back to live
Click to expand...
Click to collapse
Thanks for ur quick reply
No matter how hard i try it doesnt boot in bootloader.
I tried the all in one kit, it doesnt detect my phone..
My pc detects it as QHSUSB_DLOAD
fznnsr said:
Thanks for ur quick reply
No matter how hard i try it doesnt boot in bootloader.
I tried the all in one kit, it doesnt detect my phone..
My pc detects it as QHSUSB_DLOAD
Click to expand...
Click to collapse
hmmm then im sorry to say but i think u have bricked your phone :crying:
no choice but to send to hTC
is it this easy to brick?
one small error?
arent there any drivers for this qhsusb thing? so that it can detect my phone and then i can adb it to bootloader?
Sorry mate then I'm afraid it's bricked but still you should keep trying put the phone in charging even if its not showing led signal.. Then try again to boot into bootloader...maybe it helps..coz it should not brick so easily:fingers-crossed:
Pranav Sharma (PS) said:
Sorry mate then I'm afraid it's bricked but still you should keep trying put the phone in charging even if its not showing led signal.. Then try again to boot into bootloader...maybe it helps..coz it should not brick so easily:fingers-crossed:
Click to expand...
Click to collapse
Isi it possible that i allow it to drain the battery and then it boots by itself?
The phone is off, it will take years to drain the battery
fznnsr said:
Isi it possible that i allow it to drain the battery and then it boots by itself?
Click to expand...
Click to collapse
Actually it is a very good idea i myself did it once .. but the difference was that screen was struck on white bright HTC screen taking a lot of battery so it got discharged in 10 hrs but just now it will take a lot of time .. so i don't think you have that much patience...
That happened to me too, but that's not a brick, that's just stuck. This dude's phone is badly bricked, only way would be to find a driver for QHSUBS_DLOAD but I don't think it will be easy to find as all htc devices have this problem, someone would have already found it by now
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
droid_ilari said:
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
Click to expand...
Click to collapse
Tried it but that did not help.
Thanks for the reply. Keep helping please.
MightMouse said:
Tried it but that did not help.
Thanks for the reply. Keep helping please.
Click to expand...
Click to collapse
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
JJeamy said:
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
Click to expand...
Click to collapse
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
MightMouse said:
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
Click to expand...
Click to collapse
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
MightMouse said:
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Click to expand...
Click to collapse
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Orion174 said:
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Click to expand...
Click to collapse
I did that.
It did not work.
MightMouse said:
I did that.
It did not work.
Click to expand...
Click to collapse
Does your phone vibrate (4x or 7x) when you turn it on?
It vibrates ones when showing the HTC startup logo.
I am gonna try
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
Click to expand...
Click to collapse
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
the problem is you must find a 3rd party phone services placed on your country that are already have a riffbox or jtag hardware to flashing your phone from the beginning..
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
I cannot try this, because I dont have a RIFF box. This is hardware.
MightMouse said:
I cannot try this, because I dont have a RIFF box. This is hardware.
Click to expand...
Click to collapse
yap..RIFFBOX is a flashing hardware..
yes i know..if you already broken your phone cause of changing software by your self..htc will not recover your phone under they warranty
you already had loosing your phone warranty.. but i think that's not mean they can't help and fix your phone..off course without warranty (if they already know or detected that you already fault your warranty) then they will charge you with some of cost..
if so..with the hope of luck..then you can try brought your phone to the htc service center..then let they're analyst your phone and make decision about your valid warranty..who knows you already lucky then they don't know what are you already do it previously to that phone..
note : this all mean that's if your DHD is still recover under warranty by time..right..
hopefully your DHD will fixed soon..and good luck..