Please Help, My HTC s620 went dead after a failed rom update. - HTC Excalibur

any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.

bootrecord said:
any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.
Click to expand...
Click to collapse
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.

roloracer said:
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.
Click to expand...
Click to collapse
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway

bootrecord said:
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway
Click to expand...
Click to collapse
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0

roloracer said:
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0
Click to expand...
Click to collapse
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??

bootrecord said:
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??
Click to expand...
Click to collapse
Take your battery out for a bit and try again "not promissing anything but sometimes can help"

stylez said:
Take your battery out for a bit and try again "not promissing anything but sometimes can help"
Click to expand...
Click to collapse
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.

bootrecord said:
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.
Click to expand...
Click to collapse
sorry it sounds like you have a fancy paper weight! Bricked!!

Related

Can someone help me with SX66

guys i need some help with my sx 66, after doing a soft reset it never came back on. I doesnt even connect to pc using cradle. once i hit the power button it comes the bootup screen and get stuck there. Can some plz help me with this problem
Have you tried a hard reset? Hope you've made a backup :wink:
Have you tried a hard reset? Hope you've made a backup :wink:
reset
yeah i tired hard reset too, but it still doesnt work.....
take the battery off and leave of for about an hour or so, so the back up battery completely runs dry... then try again.
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
at this point in time i say you opt for the warranty
daonly said:
i also tried this too. I left the battery out for 1 day, so battery and back up battery would run out dry. But it didnt work either. Neway other ideas guys ?????
Click to expand...
Click to collapse
BigDamHero said:
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
Click to expand...
Click to collapse
When you get to the Bootloader screen, probably you are home free. Just use the above link to resolve you problem.
If it doesn't work, let me know as I need some parts for mine and may be interested in buying yours for the parts.

Diamond dead during hard spl update

HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?

[How To] Flash KS20 Complete Guide + Programms

[How To] Flash KS20 Complete Guide + Programms !!!
OK, I have really grown tired of people "crying" and wasting forum posts asking how to flash a rom, how their device can be recognized in LGMDP etc.
THERE ARE SOME MANY FREAKING GUIDES AND HELPFUL POSTS!
So I have created my own fully(I believe ) understandable guide on how to flash,brand,unbrand phone and restore .nv2 !
You can ask any question you want,nag to me,swear me,etc. I really like helping people!So please do not post in Spocky's or Farah's Threads for how to flash their roms!Everything you need is here!
***I am not responsible if you brick your phone or your dog dies ***
Guide Information:
www.mediafire.com/ibanezman192
If you appreciate my work,you can buy me a coffe!
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RBB5HSMJGCWGE
great, I will check it out and try it.
Thanks, man.
You are welcome
When flashing my KS20 in emergency mode, after ~10 sec the LGMDP said something about an QCSBL writing error, or somethint li that. I pressed OK too early
Now my phone doesn't work, can't turn it on and no emergency mode. What can I do now?
Take out the battery,insert it and do a hard reset.
help...
hi ...i have a problem with my ks20...i'd installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks
algabz said:
hi ...i have a problem with my ks20...i'd installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks
Click to expand...
Click to collapse
1)Wrong thread.Please do not post irrelevant things.
2)Download my guide and you will see how you can hard reset.But I cannot understand why your phone hungs up!I do not think this has to do with opera.I have opera and it works fine.
Help! My LG KS20 is dead!
I have tried searching, but nothing came up.
Yesterday while flashing, it said something timeout (1st time the bar runs across)
Now, I cannot activate emergency mode. I cannot charge the phone. There is no response, no light. Charging the battery full has no effect. Taking the battery out has no effect too.
Is there any way to fix this? My warrenty expired just yesterday
ryanswj said:
Help! My LG KS20 is dead!
I have tried searching, but nothing came up.
Yesterday while flashing, it said something timeout (1st time the bar runs across)
Now, I cannot activate emergency mode. I cannot charge the phone. There is no response, no light. Charging the battery full has no effect. Taking the battery out has no effect too.
Is there any way to fix this? My warrenty expired just yesterday
Click to expand...
Click to collapse
Very strange problem!Maybe your battery is dead Take out the battery and connect the mobile with the pc.If nothing happens then it is not a battery problem.Have you tried a correct hard reset?By saying correct, I mean holding the 3 buttons for many time until the leds flash and then flash out.Then you must release the buttons.
Thanks ibanezman for your reply...
Nope, nothing. Battery is fully charged (I have an external LG charger that was given free).
Nothing happens when I remove the battery and connect to computer. I cannot do a hard reset, because there is no LG logo, and no lights. Not green, red, or blue.
I can't flash in emergency mode, because holding down Internet Explorer and Power gives nothing. No usual green light. Laptop doesn't detect anything. Nothing in device manager.
Today while going through the logs in the LGMDP folder I came across this.
<AppName>Log For Web DownLoad</AppName>
<TIMESTAMP>20090908235324</TIMESTAMP>
<Date>2009-09-08</Date>
<Time>23:53:24.-473</Time>
<IMEI></IMEI>
<TIMESTAMP>20090908235324</TIMESTAMP>
<RESULT>FAIL</RESULT>
Notice there's no IMEI number? Could this mean anything?
ibanezman192 said:
Very strange problem!Maybe your battery is dead Take out the battery and connect the mobile with the pc.If nothing happens then it is not a battery problem.Have you tried a correct hard reset?By saying correct, I mean holding the 3 buttons for many time until the leds flash and then flash out.Then you must release the buttons.
Click to expand...
Click to collapse
I do not think this has to do with IMEI.Maybe you have lost your IMEI in the flashing process.But I believe your phone is dead/bricked
I really cannot feagure out any other suggestions.Maybe you should take it to LG Service.
ibanezman192 said:
I do not think this has to do with IMEI.Maybe you have lost your IMEI in the flashing process.But I believe your phone is dead/bricked
I really cannot feagure out any other suggestions.Maybe you should take it to LG Service.
Click to expand...
Click to collapse
OK thanks ibanzeman. I think i will just let the ks20 go and buy a new phone.
Anyway its old already, and i think i bricked it. Thanks for your assistance anyway!
ryanswj said:
OK thanks ibanzeman. I think i will just let the ks20 go and buy a new phone.
Anyway its old already, and i think i bricked it. Thanks for your assistance anyway!
Click to expand...
Click to collapse
I'm sorry I couldn't help you, good luck finding a new phone!
thanks man. i will give this guide a go!
ibanezman192, thanks a lot for this very detailed guide!
hibjibis said:
thanks man. i will give this guide a go!
Click to expand...
Click to collapse
spuke said:
ibanezman192, thanks a lot for this very detailed guide!
Click to expand...
Click to collapse
The pleasure is all mine New version of the guide is coming tomorrow
erm.. can someone help? my computer doesnt seems to recognise my KS20 during Emeregency mode
I have same problem. On Win 7 64 bit, LGMDP do not see KS20.
What is the message that appears?
Link don`t work
Hi,
I try use the link for download the archive, but the link dot work....
You can fix this??
Thanks
PS: sorry for my english, but i am not very good in this language

Diamond don't turn on!!! Help me pls!!!

hi to all
today i've flash a rom from internal storage
when the screen on my diamond say "UPDATE COMPLETE" or a things similar
i soft reset the phone
but now my diamond won't turn on and it didn't charge!!!
what i can do?
i brick my diamond?
pls help me!!!
Try to boot your device in bootloader mode and repeat the flash
SubSeven93 said:
Try to boot your device in bootloader mode and repeat the flash
Click to expand...
Click to collapse
the phone won't turn on!!!
this is the problem!!!
did you use hard-spl before flashing any custom Rom??
Mondea said:
did you use hard-spl before flashing any custom Rom??
Click to expand...
Click to collapse
ouppss sorry didnt know you are a chef!!
Mondea said:
ouppss sorry didnt know you are a chef!!
Click to expand...
Click to collapse
don't worry
but i would know because my diamond is dead
i do the rom upgrade from internal storage in the right mode!!!
battery?
if u can - try another battery and give it a try... it might be a faulty/dead battery...
if the phone is dead, and the battery is dead... it won't charge unfortunately...
good luck
cloudedhopes said:
if u can - try another battery and give it a try... it might be a faulty/dead battery...
if the phone is dead, and the battery is dead... it won't charge unfortunately...
good luck
Click to expand...
Click to collapse
i've tried another battery but without success
Fu$K...
That sucks...maybe you should try and take it to waranty...tell them that one day you presed the power button to turn on the display..and nothing...you turned it off..removed the batery..and still nothing..they have to fix it...or change it ...BEST OF LUCK
john_x said:
That sucks...maybe you should try and take it to waranty...tell them that one day you presed the power button to turn on the display..and nothing...you turned it off..removed the batery..and still nothing..they have to fix it...or change it ...BEST OF LUCK
Click to expand...
Click to collapse
i think there's no warranty because i install hard-spl and my custom rom
just bring it to a service centre
most technicians at the service centers wont even bother to check the software... just bring your purchase receipt the whole ****ing box. tell them it was not turning on after a full nights worth of charging and you have not install any third party apps.
i think there's a hardware failure and even the techs at the service centre wont even know because the the phone is an absolute brick now...
play the symphaty card. use your warranty.
I not sure but maybe you can try;
takeout your battery,
press and hold the reset,
and now insert back your battery.
goodluck
connect to main power supply and leave 5 mins to charge... try to boot...
just an idea...

[Q] DHD is dead? No bootloader anymore

Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
droid_ilari said:
Have you tried pulling the battery for a minute and the doing the volume down + pwr?
Click to expand...
Click to collapse
Tried it but that did not help.
Thanks for the reply. Keep helping please.
MightMouse said:
Tried it but that did not help.
Thanks for the reply. Keep helping please.
Click to expand...
Click to collapse
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
JJeamy said:
just tried pull out the battery for long priod..maybe a hours.. then try it again to turn on the phone with pressing n hold volume down+power..
Click to expand...
Click to collapse
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
MightMouse said:
I pulled my battery for about 8 hours, so the length of pulling does not seem to be issue.
But again thanks for helping to find a solution.
Click to expand...
Click to collapse
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
MightMouse said:
Who think he/she can help me?
I was trying to completely clean my DHD for my girlfriend. So I wiped is all off via all the information on this forum.
Tried to flash ROM, RUU, Bootloader and Kernel. (after some advices)
Now I have a big problem I think....
I cannot get into my bootloader anymore, my DHD is starting with HTC logo and then continues with Android startup and keep hanging in there.
Vol. down + Power is not getting me into bootloader.
Flashing from CMD does not seem to work either because I cannot get the DHD to connect via USB. (cable is connected to DHD and laptop)
If you can help me.... my girlfriend and I would be much gratefull.
Greetings,
Remco
Click to expand...
Click to collapse
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Orion174 said:
Take the battery out ... put it back in ...close the battery flap .....hold down vol button for 3 seconds ....then click on the power button while still pressing volume down [Maybe your volume down button is broken....i dont think that its dead]...let me know of your progress
Click to expand...
Click to collapse
I did that.
It did not work.
MightMouse said:
I did that.
It did not work.
Click to expand...
Click to collapse
Does your phone vibrate (4x or 7x) when you turn it on?
It vibrates ones when showing the HTC startup logo.
I am gonna try
what i know is accessed to the phone bootloader it just have two optional way..
first...with pressing and hole volume down+power
second..with adb command while the phone is already booting inside the rom..and off course with already enabling USB debugging too in system settings..
if both way doesn't work to access your bootloader...i think the last change is you must flashing it again the from beginning with RIFF BOX hardware and JTAG software if you have it..or take the phone to services center of HTC..
sorry...can't help more than this..
Click to expand...
Click to collapse
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
the problem is you must find a 3rd party phone services placed on your country that are already have a riffbox or jtag hardware to flashing your phone from the beginning..
MightMouse said:
It vibrates ones when showing the HTC startup logo.
I am gonna try
I am gonna look where to get this software.
Going to a HTC service centrer wont help I think..... Isnt it like "changing the software yourself will exclude HTC help"??
Click to expand...
Click to collapse
I cannot try this, because I dont have a RIFF box. This is hardware.
MightMouse said:
I cannot try this, because I dont have a RIFF box. This is hardware.
Click to expand...
Click to collapse
yap..RIFFBOX is a flashing hardware..
yes i know..if you already broken your phone cause of changing software by your self..htc will not recover your phone under they warranty
you already had loosing your phone warranty.. but i think that's not mean they can't help and fix your phone..off course without warranty (if they already know or detected that you already fault your warranty) then they will charge you with some of cost..
if so..with the hope of luck..then you can try brought your phone to the htc service center..then let they're analyst your phone and make decision about your valid warranty..who knows you already lucky then they don't know what are you already do it previously to that phone..
note : this all mean that's if your DHD is still recover under warranty by time..right..
hopefully your DHD will fixed soon..and good luck..

Categories

Resources