A few hours ago i was browsing the xda portal when i found a thread about someone booting win 95 on his HTC Himalaya.... so i found it a little bit interesting so i want to try it out myself..... just few minutes later i googled some info and find out that need to increase my screen resolution by nyditot virtual display software....then i just download the trial version of it and try it on my BA.....however, my device wont pass the tricolor bootscreen(first one that is) and it just freeze there.....so i tried to remove the battery and luckily my device boot normally afterwards...dammit that app...so i go to settings and remove that sh**ty app..after that, i power off my device and put it into the cradle to charge it..my ba lights up as it detect the charging...but i just saw a white screen instead of a display...it shocked me and the first thing that i do was to soft reset it...however, after soft reset,i tried to power off and power on my phone..then the same as before a white screen,,,i also tried setting the screen to blank by using core player options... the screen didn't went blank as if it was powered off...but it seems that i can still see the display like just the backlight is turned out...however touching the screen wont do anyting....i need help asap as i need to use my device to finish my assignments...well the only possible solution that i'm seeing right now is just a hard reset...but i dont want that..recently just got everything working on my BA(wi-fi, mms, psx games,etc that i dont want to lose)help me , please.....
hfzarx said:
A few hours ago i was browsing the xda portal when i found a thread about someone booting win 95 on his HTC Himalaya.... so i found it a little bit interesting so i want to try it out myself..... just few minutes later i googled some info and find out that need to increase my screen resolution by nyditot virtual display software....then i just download the trial version of it and try it on my BA.....however, my device wont pass the tricolor bootscreen(first one that is) and it just freeze there.....so i tried to remove the battery and luckily my device boot normally afterwards...dammit that app...so i go to settings and remove that sh**ty app..after that, i power off my device and put it into the cradle to charge it..my ba lights up as it detect the charging...but i just saw a white screen instead of a display...it shocked me and the first thing that i do was to soft reset it...however, after soft reset,i tried to power off and power on my phone..then the same as before a white screen,,,i also tried setting the screen to blank by using core player options... the screen didn't went blank as if it was powered off...but it seems that i can still see the display like just the backlight is turned out...however touching the screen wont do anyting....i need help asap as i need to use my device to finish my assignments...well the only possible solution that i'm seeing right now is just a hard reset...but i dont want that..recently just got everything working on my BA(wi-fi, mms, psx games,etc that i dont want to lose)help me , please.....
Click to expand...
Click to collapse
Well, uninstalling nydiots might have messed some drivers up. Sorry to tell you this, but I think that your only option will be hard reset. BTW, I edited your post a bit... watch the language we have kids around the site, you know?
yeah, sorry bout that....i was really upset that time....but now i've found a solution....luckily i dont need to do a hard reset...i reinstall the application again(nothing much to lose...)and realised that in the application folder there was a shortcut named "vd restore"(what else should that mean...)used that and viola, everything was back to normal...then, later, i downloaded nyditot vd the latest version and it worked....just that it was too slow maybe because of the scaling...and titanium wont work...maybe it need it's own cpr....so i want to request anyone here who have it, vga titanium .cpr file please post it for me....will continue to explore what i can do with this application...and btw, thanks mr.egzthunder1 for replying....
Glad everything worked out
Related
please can someone help me i have a wm 6 i instaled navigon gps i then went into menu and pressed night mode and the screen went off ,i know the phone is not dead as you can ring it /and it conects to pc it also boots but the screen is blank i have removed every program i have instaled including navigon and the sd card but it will not come on i noticed if you needed to hard reset you have to put code in and then it will do i full resett ,only i cant see the screen please please help
try opening IE and Media player? does the same thing happen when both those programs are on and you are surfing the web?
westentertainer said:
please can someone help me i have a wm 6 i instaled navigon gps i then went into menu and pressed night mode and the screen went off ,i know the phone is not dead as you can ring it /and it conects to pc it also boots but the screen is blank i have removed every program i have instaled including navigon and the sd card but it will not come on i noticed if you needed to hard reset you have to put code in and then it will do i full resett ,only i cant see the screen please please help
Click to expand...
Click to collapse
Do you mean that even from the moment you turn on the phone that the screen is in night mode "dark"?
If you need to do a hard reset you dont need a code. Have attached instructions in pic Remove the storage card before you hard-reset.
Mikey1022 said:
try opening IE and Media player? does the same thing happen when both those programs are on and you are surfing the web?
Click to expand...
Click to collapse
And how would he do that? He has no lcd as soon as he turns on his device...
You are in need of a new LCD screen.
I ask about IE and MP cause sometimes, when your battery is weak, not as in 25%charged. Just weak as in about to hit the dirty road dead, it might suck up all the juice and turn LCD off to conserve energy.
he doesnt need a new lcd.. seems a hard reset fixed his problem, probably why he hasnt replied.
Hi Forum,
I got a dash with the WM 6.1 from this great forum.
Somehow since yesterday the screen turned completely white
There was no physical impact on the phone what so ever...
When I turn the phone on, the screen is all the time white... but the phone is still working since the alarm is still ringing....
I've tried already the following:
- took the battery out for over 6 hours and tried again
- with and without sim/sd card
- to reset the phone but with no success since I cant see anything (2 softbuttons, powerbutton etc.)
- putting WM 6.5 with no success with the Error 270
- pressing and holding any button
- tipping the jagger for 3 times
- and finally hitting the phone
All these steps didnt use me anything...
I'd be gratefull for any sudgestions
Maybe the screen is just damaged and its not because of the software...
thanks a lot,
RedDot69
Hard-reset will be best option and can be done blind since it's button sequence as known then green key, i knopw that peeps have done it blind and with you spending enough time it will be sorted... The other option is bootloader and flash your stock ROM as won't get an error 270
thanks for the fast reply.
ok about the hard reset.
I hold both buttons beside green and red button then while holding i turn on the phone (power button more then 3 sec.) after it turned on i let go of the buttons and press the green button (I pressed it a several times). What after that?? will everything happen automatically??
if yes then the hard reset wont help since its still white...
unfortunately I dont have the original ROM anymore (WM5).
Do you know where I can get it??
Ok I guess I managed to hard reset this thing.
Unfortunately with no success
can anyone help?
will the problem be gone if I change the display?
RedDot69 said:
Ok I guess I managed to hard reset this thing.
Unfortunately with no success
can anyone help?
will the problem be gone if I change the display?
Click to expand...
Click to collapse
Can you sync with your PC? That's something that you haven't state in your original post.
From what you have posted in the first post, looks to me like your phone has suffered water/moisture damage. Classic white screen, nothing shows, display turns off after default timeout seconds, phone functions smoothly. For this to occur, you dont have to dunk the phone in water, phone in pocket when exposed to light rain, snow will do it.
If this is the case, the first thing you can do to salvage the phone is to remove the battery, otherwise the charge will short circuit more, leading to irreparable damage.
Second thing, try and keep it open for 24 hours or more and try ONCE more, just once, if the moisture has been evaporated. If not, remove battery again.
Next you will need to find a service center where they will dismantle the phone and physically air dry the PCB, and hopefully if it hasnt already shorted, it will come back to life.
The cost for this could vary from minimal to astronomical, depending upon which country you are in.
Do not take my words for granted, do a google for phone water damage, find out if those are your exact symptoms.
All the best.
gmaniac2008 said:
Can you sync with your PC? That's something that you haven't state in your original post.
Click to expand...
Click to collapse
yes I can. I already saved the contact list The phone is perfectly working beside the white display...
@ ccpraveen
I really dont think thats the case. Since I was sleeping on the couch, the phone's alarm went of like at 11 and it was all ok, then 30 min later the screen was all white
And the night before I left the phone at home...
Bringing the phone to some service center is out of question, since I live in Germany... If possible, I'd have to repair it my self...
By the way the Display time out works too... Somehow I got the feeling that it wouldnt use me anything to change the display
please, can no one help
RedDot69 said:
please, can no one help
Click to expand...
Click to collapse
install this on your computer http://www.mymobiler.com/
it will silently install on your s620 when it syncs with activesync and you will be able to view your screen from your computer monitor
if everything works buy a new lcd from ebay and replace it because its probably broken
--- sorry didnt want to post ---
Please skip this reply and read the next (cant delete this anymore)
ducamie said:
install this on your computer http://www.mymobiler.com/
it will silently install on your s620 when it syncs with activesync and you will be able to view your screen from your computer monitor
if everything works buy a new lcd from ebay and replace it because its probably broken
Click to expand...
Click to collapse
thanks a lot for the very usefull link
I installed the programm and I can see my display on my monitor
Then I hard reseted the phone
Installed WM6.5 from the forum successfully
But the display is still all white
If anybody thinks that the problems any way not from the display please do tell.
RedDot69 said:
thanks a lot for the very usefull link
I installed the programm and I can see my display on my monitor
Then I hard reseted the phone
Installed WM6.5 from the forum successfully
But the display is still all white
If anybody thinks that the problems any way not from the display please do tell.
Click to expand...
Click to collapse
My impression is that you have a hardware problem, maybe your screen has something loose. If you state that you will fix it by yourself, you can read the sticky on how to take apart your dash.
There are also power management settings that will turn the display white, however if it is white all the time, then it's probably hardware. Loose connections does sound possible. I'd check that first
You can try the following:
*- COMPLETELY disassemble your phone.
*- Take the PCBs apart on a table or something.
Then... take an hairdryer!!!
You have to dry your PCBs: take a PCB in your hand and do the work.
Be aware of not using TOO HOT air, or you'll melt all.
If it doesn't work, try to dry your LCD.
Doesn't work?
Okay, then the only 2 possible fixes are:
*- Replace the LCD Flex Cable if not integrated in the LCD.
*- Replace the LCD.
Hope that you'll get your phone fixed and running
A few months ago I dropped my dash and cracked the screen, it still worked, could still dial, could still recieve calls.. just couldent see anything.
I ordered a G1 and in the closed the Dash went.
Well, no I need to add a 2nd line to my account, and I need a 2nd phone.
So I figured I would order a new screen for the dash and just use it. Being prudent I decided to first make sure it still worked, I put it on a charger and the light came on showing it was charging.. ok, good deal..
I let it charge a while, popped in my sim, and powered it on, figured I would make a test call and such.
Well the screen lights up solid white (no suprise.. its broke) and after a few seconds.. the phone just starts beeping the alarm tone.. then it starts beeping it again over top the first.. and again and again untill there is this cacophony of racket, I have to pull the battery to stop it.
it worked fine (aside from the screen) when I "retired" it, but now it just freaks out.
I tried hooking it up to the computer, the light one the phone comes on, but thats it, the PC doesent see the phone.
Obviousley Im rather nervous about the idea of buying a new screen and going through the trouble of installing it on a phone, that best I can tell.. is totally screwed up..
any ideas on what I should do?
P.S. I can post a video of the insanity if that will help.
Have you tried the first natural response when things go wrong "a Hard-Reset" ?
Ok, i tried a hard reset, best I can tell it worked (no visual cues)
it no longer does the funky chicken on start up, but it doesent do anything else either.
I put my sim in it, let it boot up, tried calling it from another line and it just went straight to voicemail.
and if u conect to the pc, anything happen?
2ndly, try removing the battery, put it back then hold camera button and whilst still holdin it press the power button, wait for some 3 seconds then release em and then coonect to pc, check in device manager if anything shows up....
updates......
Check in comm manager if the phone is on or if in flightmode etc.. If not next step is to re-flash stock and see if the problem still persists?
keep in mind the screen is broken, i cant see anything.
Wingnutt said:
keep in mind the screen is broken, i cant see anything.
Click to expand...
Click to collapse
lol can't mem reading that but if can get sync then MyMobiler will let you see the screen
try what i said above and lets us know if u see something like windows ce smartphone in device manger
FRX07 is out now!!
Removed...
Removed.....
DIAM100(RAPH/TP???) ts-calibration file
If you have no clue how to generate/get one or just don't feel like it, someone has uploaded one for use. I personally know how to do this but thought I'd share since there is a RHOD ts-calibration file in our thread...
XDA-dev forum attachment (Zip format)
I'll also upload one if for whatever reason the person who uploaded it, decideds to take it down. Just let me know!
n-Joie! (Enjoy)
R^7Z, if you're OK with it I'll attach this file to the post instead of mine. Just didn't have a non-RHOD one handy .
Kool with me... I linked it from an earlier post. Just hope it doesn't grow two leggs and walk-off for some strange reason (It's not mine but I figured they won't miss it) On the other hand, I could upload one of my own later, just in-case...
THIS post to be more exact​
n-Joie! (Enjoy)
[R^7Z EDIT]Just noticed it was for a DIAM100, is that the same??? I'll upload one of mine later as mentioned earlier. Unless someone beats me to it... [/R^7Z EDIT]
R^7Z said:
Kool with me... I linked it from an earlier post. Just hope it doesn't grow two leggs and walk-off for some strange reason (It's not mine but I figured they won't miss it) On the other hand, I could upload one of my own later, just in-case...
THIS post to be more exact​
n-Joie! (Enjoy)
[R^7Z EDIT]Just noticed it was for a DIAM100, is that the same??? I'll upload one of mine later as mentioned earlier. Unless someone beats me to it... [/R^7Z EDIT]
Click to expand...
Click to collapse
I think the RAPH/DIAM calib file should be the same. I updated the first post, thanks!
i put all the files in internal storage n took statup for my file in root direc of internal memory thn i started haret after completing the flying andriod logo appers and after sometime windows came andriod the lock screen but when i pressed menu diamond freezes and i have to reset my device and then i again strt haret and again on andriod main screen i lft my phne for 5 mins the li8 goes off and whn i pressed power button my diamond was actually turned off already
diamond100
rom bsb 6.5 wwe titanium
my diamond alwys got freeze on andriod main screen any solution as m new to this windws phne
How many times have you attempted to reboot thus far? Have you attempted to also delete the file called data.img and let the system recreate it? Also, are you using the most up-to-date kernel package and rootfs?
i did that many times i ws trying since 4 hrs nw my phne batry is dead also haha chrging it again to try again
whnwver i delet dta.img after boot up and tht flying image of andriod it came but awhn i press anythng it freezses if i leave my device fr like 5 mins whn light of device off my diamond turnd off
You shouldn't touch the font panel while it is booting; only after the boot animation. You will need to monitor it for the initial boot so that it doesn't do anything crazy while it is finishing up the initial boot process. I usually tap and hold the notification bar(very top bar) once every few seconds, till it displays the date. Once I notice the response is quicker then I set the display timeout for longer than 2 minutes; 10 minutes is good 30 even better. In addition, I usually download and install batterybooster (free from the market) once I get a chance and set it to never time the display out. I find it easier to manage by manually turning off the display.
i touch after booting and all setup process
Are you monitoring it after the boot animation? Have you looked into any of the other suggestions?
hey i managed to run andriod but u knw after some time my phone back button stopd working and when i presed it make my phne screen off and phne is heating lil bit
can u tell me how to do setting in this andriod hahah
You'll need to set that under Spare Parts. You can change the behavior to when you press the End key it takes you to your home screen instead of turning off your screen. OR just set it to do nothing.
Plus, the capacitve panel on RAPH/DIAM is notoriously bad in Android. We probably haven't implemented the drivers correctly, but the main source of the problem is there's only two physical buttons for 4 actual buttons. So you have to determine where the finger is to relate which button is actually being pressed, and Android seems to get confused at times which one you're pressing.
When I had a RAPH, I noticed that if I started at the corner of the button and made sure it lit up before pressing the button, it would work every time. Real PITA, but it is an old phone .
ahaha i m using indriod dam smooth but gingerbread version
anyways how to copy music in it m confused and how to install apps as its not detecting my phne on usb means on my cmputer any drivers for that
PM sent
@xtremists
Check your inbox.
Thanks!
thnkx alot man
So, unluckily today i find myself here lookin' for help with my phone. I had already took a look on other brick threads, but i can't find an appropriate answer to my problem.
I'm (i was) running lineage-14.1-20170602-nightly, i had ne0zone75's TWRP 3.1.0.0-0, and that's how the brick came in a strange way; i was simply on XDA Labs app browsing the forum, when i received a call. I've answered, and when i shut off the call the phone shut off immediately after. I thought it was a reboot, but keeping pressed the power button didn't switched on the phone anymore. So i've tried to remove the battery and re insert it after some minutes, but the only thing i can get is the screen with the samsung logo that goes all black after 5 seconds. I already had other bricks due some errors of mine in the past, but this time it's really difficult.
1: I can't access recovery mode. Ow, how i wish i could.
2: I can access download mode, but after that i reach the ODIN MODE screen with the details of product binary, KNOX, ecc. the phone shuts off again.
3: If i keep the power button pressed, the phone doesn't starts. It only starts if i replug the battery in, but after some seconds it shuts off again.
4: How could a call as another mess up the whole phone?
5: I didn't installed nothing new from at least a week... yesterday an automatic update of the Play Store took place, but except that nothing has been changed. Nothing of nothing! No settings, no apps...
What could i do? Installing Kies with Samsung drivers could help me flashing a stock rom for example? Because at the moment, there isn't too much that i can do with the phone in this state... I hope this little jewel won't have to become a stone to be thrown away. Any help would be great, and really appreciated. Thanks in advance...
Things has got worse. Now my device doesn't starts at all; no vibrations, no signs of life, nothing. I've tried even to put it for 6 hours in my refrigerator, because i've read that the cold temperature could be helpful to fix some broken contacts on some component, but i'm losing hope 'bout it. I supposed that at this point is something hardware-based and not software, because it's just impossible that a call like an other one could be the cause of this hard brick... The only thing is that if connected to my PC, it is being showed as QHSUSB_LOAD. I'll try some methods that i've seen in other forums, like softwares that tries to fix this, but i think that i'll be forced to buy a new device. Neither an usb-jig could help me to force the download mode if the phone is dead in every aspect... the only thing that i still didn't understood, is if a debrick.img on my SD card (sadly i've read that a microSD class 10 with at least 16 GB is required, and i don't have one) could help somehow on a situation like this one of not. Still no one could advice me with some tip, guys
Edit - feel free to close this thread, I have another phone now