A few months ago I dropped my dash and cracked the screen, it still worked, could still dial, could still recieve calls.. just couldent see anything.
I ordered a G1 and in the closed the Dash went.
Well, no I need to add a 2nd line to my account, and I need a 2nd phone.
So I figured I would order a new screen for the dash and just use it. Being prudent I decided to first make sure it still worked, I put it on a charger and the light came on showing it was charging.. ok, good deal..
I let it charge a while, popped in my sim, and powered it on, figured I would make a test call and such.
Well the screen lights up solid white (no suprise.. its broke) and after a few seconds.. the phone just starts beeping the alarm tone.. then it starts beeping it again over top the first.. and again and again untill there is this cacophony of racket, I have to pull the battery to stop it.
it worked fine (aside from the screen) when I "retired" it, but now it just freaks out.
I tried hooking it up to the computer, the light one the phone comes on, but thats it, the PC doesent see the phone.
Obviousley Im rather nervous about the idea of buying a new screen and going through the trouble of installing it on a phone, that best I can tell.. is totally screwed up..
any ideas on what I should do?
P.S. I can post a video of the insanity if that will help.
Have you tried the first natural response when things go wrong "a Hard-Reset" ?
Ok, i tried a hard reset, best I can tell it worked (no visual cues)
it no longer does the funky chicken on start up, but it doesent do anything else either.
I put my sim in it, let it boot up, tried calling it from another line and it just went straight to voicemail.
and if u conect to the pc, anything happen?
2ndly, try removing the battery, put it back then hold camera button and whilst still holdin it press the power button, wait for some 3 seconds then release em and then coonect to pc, check in device manager if anything shows up....
updates......
Check in comm manager if the phone is on or if in flightmode etc.. If not next step is to re-flash stock and see if the problem still persists?
keep in mind the screen is broken, i cant see anything.
Wingnutt said:
keep in mind the screen is broken, i cant see anything.
Click to expand...
Click to collapse
lol can't mem reading that but if can get sync then MyMobiler will let you see the screen
try what i said above and lets us know if u see something like windows ce smartphone in device manger
Related
I got my hermes from my friend, (HTC X01HT), she didnt want it because she dropped it and the ringer didnt work. it had only gotten unplugged, so i opened it, plugged it in, and had an awesome phone.
I dont think this is normal, but from the time she gave it to me, the screen made an awful highpitched ringing noise, (very uni-directional, it was weird).
Anyways...
now, the screen is just white. for a little while i could get the screen back, just by opening and closing the slider and hitting the power button a couple times.
Sometimes the today would display, then it would jarble up a little bit then fade to white, but i cant even get it to do that anymore.
Anyone else seen this issue? i'd hate to get rid of a perfectly awesome phone.
Thanks!
(also, if someone could post a picture of the device locked screen, where you have to enter a PIN to use the phone, that would be great, im trying to get into the phone with activesync, but its locked, and i dont know where to push the buttons.)
thanks!
~Mix3d
Looks like the screen is unplugged, really. Maybe you need to disassemble further, like http://www.pdacenter.ru/razborka/razbor_hermes/ shows?
keep in mind, it worked fine for almost three weeks before the screen issue started... but i will try that when i get my hands on a small flathead again.
There's a whitescreen & D-Pad failure issue that can be caused by many things, including DROPPING the phone.
I wrote a guide about it which seems to be quite successful for many people.
http://forum.xda-developers.com/showthread.php?t=321163
so after trying a hard-reset, (which somehow displayed on teh screen), and clicking no, i was able to get the screen back... only this time with the moved screen problem, wrapping around at the top about 1mm.... and the buttons didnt work.
i tried your guide, but now im stuck at the white screen again... :/
Tyman07 said:
**** You Dude!
Click to expand...
Click to collapse
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
NJDubois said:
i posted the begining of my problem somewhere on monday but cant remember where. so.....
on monday, the screen on my tmobile dash messed up, now the top half of the screen has white horizontal lines covering it.
well, i called tmobile and the phone was still under warrenty, so got a like new phone sent and it arived today. I went about unlocking it and upgrading to wm6.1 like i had on my last phone. started out with all sorts of problems sycning and i had to reinstall active sync and that seemed to fix it. continued installing the upgrade, the dos program runs i press the center button and i get the red blue green screen and i know from before that that normally means it isn't working, so i reboot the phone, re sync, and re do it and get the red green blue screen again and the update program says it can recover and it leads me through a four step process, upplug, pull bat, reboot and do it again, only it reboots into the red green blue screen, wouldnt sync and when i turned it off, i couldnt get it to power back up. no response from the phone at all. pulled battery many times and all.
What are my options? I know that i agreed to the statment and i have no one to blame but my self. is there anything i can do? i have 7 days to return the half working phone, and i have a feeling that because its unlocked and has wm6.1 on it that tmobile is going to charge me what ever it will be. I have 200.00 in credit with um, and i feel that those fees will take away from that, leave me with an un usable phone, and no money to do anything about it !
a brainstorm, could i just tell tmobile that i got the phone that way? or would they see through my lies?
please please please please help!!!
and thanks a ton in advance.
Nick
Click to expand...
Click to collapse
Okay do this, make sure the phone is off and hold the camera button down for about 5 seconds... this button is located to the right of the keyboard. While still holding it down plug in the phone to the usb and now you should see a tri-colored screen come up. Now you can load the original rom the phone came with... The official roms could be found in the link below... called "official roms" and just download the t-mobile rom... and now you can flash your phone with the original rom...
stonersayswhat?
gixxum said:
stonersayswhat?
Click to expand...
Click to collapse
quis-ego....
anyone seen the other half of my thought from the other night? anyone?
Ok, I had found a forum post saying to hold down the SYM button, but couldn't get it working untill I read your reply. Much thanks, the phone is on, and giving me the red green blue screen. I hear the windows alert saying a USB device is plugged in, but active sync wont pick it up. So I'll post about it here, and while I dig through the internet trying to find my cure, I will hope that someone will know what my next step is.
Much much thanks jdoggraz! At least now I know my phone isn't completely dead!
Nick
jdoggraz already told you what to do. YUou do not have to wait for active sync to pick the phone. Just run the exe for the orginal rom.
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
[EDIT]
I have found something about a program called Mtty.exe, and also a UNI_ExitBootLoader But I get a "un able to connect to usb" error with both programs when I try to connect. But, once again, every time I plug the phone into the computer I hear the alert saying a usb device has been attached??
[Another Edit]
I just noticed in Device Manager, under Window CE USB Devices, that my Smartphone USB Sycn Has that nasty Yellow explanation mark next to it.
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
?
NJDubois said:
I have tried to do a hard reset.
Hold the 2 softkeys down(the "-" on each end) for a few seconds, hot the power button down for 2 seconds and then hold the 2 softkeys down and wiat, but nothing happens. Donno why, but may be not being able to hard reset is a clue to whats wrong.
Click to expand...
Click to collapse
why are you resetting it? you were at the bootloader screen in your last post...right where you needed to be. now you are 2 steps back?
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
NJDubois said:
Sorry guys, I guess I wasn't getting a refreshed look at the forum post, and I didn't see any other posts. I went back to what I was told to do in the first place.
I first tried
1.33.422.1 (Worldwide English, WM6)
1.27.405.1 (Worldwide English, WM6)
With both I get:
ERROR [224] : INVALID MODEL ID
This update utility cannot be used for your smartphone. Please check your Update Utility.
And in the lower right there is a string of characters that is different every time.
What am I doing wrong? I'm so frustrated. I followed your instructions =(
[EDIT] OMG I am an idiot, ignore this post. If I wasn't so beat I might have scrolled down and noticed the tmobile DASH!!!!!!!!!!!!!!
Click to expand...
Click to collapse
pass the hookah brother..i wanna hang out in your world
puff, puff, give... man!....you're [email protected]#ing up the rotation!
An update.
I have gotten wm5 installed and working on my phone. I can't for the life of me get the 6.1 update to work. I get the agreement, press the center button and it goes back to the OS, the phone then locks up, and I have to restart it to re sycn.
This is very time consuming! The phone takes for ever to start. I also want to note that I upgraded my last dash with little problems, but this dash has been nothing but a head ache. WHY?!?!? I am not looking forward to being stuck with this phone.
Thanks everyone, for all the help. I went a little off course last night, I was falling asleep trying to get this thing working.
puff puff pass
nick
[EDIT] Why wont the screen go almost white after i click the middle button?!?!?!?!?
It works, YAY!!
Thank you soooo freaking much, everyone!
NJDubois said:
It works, YAY!!
Thank you soooo freaking much, everyone!
Click to expand...
Click to collapse
No problem, so what exactly did you end up doing?
damn! it's "cashed"!
pudgedaddy said:
damn! it's "cashed"!
Click to expand...
Click to collapse
hahaha
Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse
so ive been having this issue of my phone turning off randomly. ive read other posts where ppl are saying its the battery, get a new battery. i got a new battery and its still turning off. i let the phone load and stuff but the first button i hit, no matter which button, the phone just turns itself off. ive tried the rest the phone with the on button/2 soft keys. tried holding the camera button while turning the phone on and nothing seems to work.....this sucks.
.......anybody?
cory0821 said:
so ive been having this issue of my phone turning off randomly. ive read other posts where ppl are saying its the battery, get a new battery. i got a new battery and its still turning off. i let the phone load and stuff but the first button i hit, no matter which button, the phone just turns itself off. ive tried the rest the phone with the on button/2 soft keys. tried holding the camera button while turning the phone on and nothing seems to work.....this sucks.
Click to expand...
Click to collapse
Does your phone power off when connected to a charger? Sometimes a hard reset could solve the problem.
hey, thanks for responding. this is very frustrating. even with my old battery, while being plugged in, my phone was still turning off. for some reason with the new battery and phone plugged in i could actually move around on the home screen without it turning off but when i hit the start menu nothing would happen (i was trying to do a start>accessories>clear storage). and somehow i finally got the hold 2 soft keys and hit the power button to work. now im reset and all appears to be working now although im a little scared to add programs. i really appreciate the response. it gave me the encouragement to keep at it when i was about ready to give up.
cory0821 said:
hey, thanks for responding. this is very frustrating. even with my old battery, while being plugged in, my phone was still turning off. for some reason with the new battery and phone plugged in i could actually move around on the home screen without it turning off but when i hit the start menu nothing would happen (i was trying to do a start>accessories>clear storage). and somehow i finally got the hold 2 soft keys and hit the power button to work. now im reset and all appears to be working now although im a little scared to add programs. i really appreciate the response. it gave me the encouragement to keep at it when i was about ready to give up.
Click to expand...
Click to collapse
Good to hear everything working our for you. You could always try to add one program as a time to see how your phone would react to it. Yes, sometimes it takes more than one try to get your phone working right.
Again, good luck
ok, after i got everything working again i updated my tmobile rom to the latest version and of course the next day i was having the same problem. the phone just shuts off. is there something physically wrong with the phone? i cant figure this out. should i try an older rom? i dont know what to try next. any help would be appreciated.
cory0821 said:
ok, after i got everything working again i updated my tmobile rom to the latest version and of course the next day i was having the same problem. the phone just shuts off. is there something physically wrong with the phone? i cant figure this out. should i try an older rom? i dont know what to try next. any help would be appreciated.
Click to expand...
Click to collapse
Read above for the solution.
ALWAYS do a hard reset if you up- or downgrade the ROM.
just completed the hard reset with the phone plugged in, i pushed a button and it turned off....
i have a a100 with the latest flexreaper rom installed and im stuck with a pretty serious issue:
a couple of days ago the tab was acting real slow and sluggish and getting bad battery life didnt think nothing of it so i just rebooted a couple times and left it alone . all was good untill the battery hit 10% and i plugged it up using the factory ac adapter. the next day (maybe 6-7 hours later) i went to turn it on and nothing no vibrate no screen flash nothing; other than the power button turning blue as i pressed it and it would stay on for a couple hours but still no other response from the tablet.
im at my wits end on what could be wrong and now i got my wife with her foot on my neck till i get it fixed. can anyone help me?
ive tried to do a hard reset with the reset button tried to boot into recovery /bootloader no dice
(also my home button flashed a couple time i pressed the power button) dont know if its relevant but wanna get as much info out as possible
wondering if anyone can help me...
frenize said:
wondering if anyone can help me...
Click to expand...
Click to collapse
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
pio_masaki said:
It may take awhile for someone to see this and form something to try, random bricking for no reason is rare, its almost always some error by the user. However have you attempted adb connection to it? Leave it powered off, connect to the PC you used to unlock the boot loader then power on. Does the PC make the USB connect sound? Does the Acer vibrate? Did the home key blink again?
It really sounds like your boot partition is wrecked which wouldn't normally happen outside of flashing. If boot loader is trash then it won't know what to do and just sit there. No recovery or anything else.
Tapatalked from my Galaxy S II.
Click to expand...
Click to collapse
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
frenize said:
it made something like the connect sound but instead of the regular duh doom sound it did a dadadoom (kinda hard to describe the sound) but it was faster than ive ever heard the connect sound before which is weird. the tab didnt vibrate and it seems the home button blinks when the tab is dead and needs recharged
Click to expand...
Click to collapse
Yeah I know that sound it means USB connected but error for some reason. Its been shown if this thing dies all the way down it wont read the battery correctly and probably needs to be sent in. Before that I personally would unplug it open it up and remove the battery for awhile, maybe an hour then put it back and plug it in. But thats me, not the advice I'm giving. If you have warantee on it use that.
The batteries on a lot of devices and laptops etc have something of a fail safe, if the voltage drops below a certain point it trips to prevent cell damage, however it renders the battery useless.
I haven't searched out much past that if a reset is possible by us, but it seems the pack is trash after or needs sent in.
Since this is a sealed unit you void warranty opening it (well unlocking the boot loader did too) so you can't send it in for repairs without paying for it.
I hope someone can jump in and help figure this out, and prove me wrong.
Tapatalked from my Galaxy S II.
Weird, This exact same thing happened to me. Used it in the morning and now after work it won't turn on. I had already tried disconnecting the battery, but hadn't thought to leave it disconnected for an hour. My tablet has been running the leaked ICS since it came out and The last factory reset it had was about a month ago. It was working fine up until this. The power button seems to be responding correctly, the issue is that after the LEDs light up, there is no vibration or display. I hope someone can help us with this issue.
EDIT:
It won't connect in ADB mode. It will only appear on my computer as an APX device and since there is no vibration I am unable to boot into fastboot. Any help or suggestions? All the threads I have found have involved booting into fastboot.
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
same thing here.
max69power said:
i am also having this problem. i set ti backup last night to save to box i turned it on this morning it.worked set it on the charger came back to a frozen screen. I turned it off now just a black screen it turns on or the home button dose but nothing comes up on the screen
Click to expand...
Click to collapse
I have been using ICS the leaked one, and last night I was goint to check my email and it did not turn on, I though the battery died. I plugged to the charger and this morning I tried to turning it on but it failed. I did the reset pin but nothing. I connected to the computer and it was recognized as a APX device and installed a driver ACER Picasso USB recover but i cant access anything. I am a nob. Thanks
A100 blackscreen
i am also having this problem. last night. just a black screen it turns on or the home button dose but nothing comes up on the screen. :crying: Help!!!!!!
Has anyone tried holding the power button for a while? Laptops do this too, if someone felt ventures, try taking the battery out and hold the power button. No promises, might work.
sent from my ICONia
same here
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
If the screen is blank while powered on its in failsafe mode, in other words is bricked, has to go to Acer.
Tapatalked from my Galaxy S II.
This just happened to me a few weeks ago as well. If you are still under warranty send it in to Acer, thats what I did. I just got an email saying they had fixed it and were sending it back for free!!
At the time I was on the 9/02 JB build. I wonder if this issue is caused by faulty hardware or if it is an issue that was made by rooting and unlocking it? I don't know enough about this stuff to answer that though, but it does make me think whether I should root/unlock it when I get it back or leave it stock.
Also thanks Pio_masaki for helping me a few weeks back wasn't sure if I was even going to send it in until you said they most likely won't be able to tell.
I highly doubt they even CARE when sending these in. They will void for physical damage most likely.
tshm55 said:
Having the exactly same issue, here...
I also tried to hit the hardware reset button and it does not help.
Click to expand...
Click to collapse
Ohmygod,
Same here, but it's 3 years ago. Sorry for digging the topic. Still no hope? I still keep the tablet and have just buy another refurbished mainboard to replace but still no vibrate and blacksreen still there.