Hi,
as some of you already know, it seems that there are different Region Codes on the market, which have different languages enabled on the phone.
As an example, a French version has only French and English to choose from (incl. keyboard and dictionary).
Even if you try to install a new firmware from scratch, it doesn't change your language since the firmware reads the Region Code and only installs the language acc. to the code.
Sicne I don't know, where I can find this code on the phone to change it, I would like to find out if I could just overwrite soem files (see below) what I was able to find with the Linda File Manager.
If you open Linda, you can select MyPhone. Navigate to etc/firmware and please tell me how your files look like.
Mine look as follows:
default_france.acdb (123kb)
default.acdb (123kb)
fw_bcm4329.bin (236kb)
yamato_pfp.fw (9kb)
yamato_pm4.fw (9kb)
BCM4329B1_002.002.023.0298.0303.hcd (14.83kb)
Please only from such phones, which are not branded to any Operator.
What I would like to try is to overwrite them with someones files which have another European version.
Thanks
SJ
No one able to help?
Related
based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!
Thanks, has it included the Chinese IME (like Pinyin by keyboard)?
sorry no china-japanese ime on it.
i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/
Did you mean thai font include?
wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****
Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.
Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT
first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode? right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!
thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's
Hello,everybody:
I upgrade my phone with an english rom, i found that my time zone(country) excluding in the rom. How could i add it manually???
for example(1):i can't found "traditional chinese(big5)" in the regional setting, how could i add it by myself?? using registry editor or re-edit the rom file??
e.g.(2)：When i use some software, which can be selected region(like lation(xxx),US(xxx),Traditional chinese(xxx)......). with older rom, the software will show me "traditional chinese(big5)" selection, but the new doesn't. I had this problem in using mToken, if you used this software, you might know what i mean.
thanks a lot.
U probably be the one asked in Mobile01 too. Basically, U need to replace the wince.nls (use Resco Explorer if you don't know how to cook rom) from Chinese Rom. But you also need to put Chinese font under /Windows (or /Windows/Fonts) to displace Chinese
jackleung said:
U probably be the one asked in Mobile01 too. Basically, U need to replace the wince.nls (use Resco Explorer if you don't know how to cook rom) from Chinese Rom. But you also need to put Chinese font under /Windows (or /Windows/Fonts) to displace Chinese
Click to expand...
Click to collapse
thanks for your reply.
I had already replace chinese wince.nls with the eng rom, and put the mingliu.ac3(chinese font) to /windows. I know the process to display chinese in a eng rom. And my phone can show chinese correctly.
My problem is not the "chinese display" question. I found the eng rom didn't include "chinese tradiotional" in the "regional setting". Of course, I can set clock to taipei, but the regional setting(地區設定) is lack of chinese traditional.
finally, i get rid of it. It is wince.nls problem.
I don't know why I could use it all right before but now.
After re-install wince.nls , the regional setting is ok.
Thanks Jack.
Enabling Multilanguage Support for Touch Diamond. GSM ONLEY NOT CDMA
Do this at your own risk, I seek no reward for this and don’t hold me responsible for any information given here. I have tried this on my own devices which are xda Ignito and orange htc and it worked a treat.
Here you go Guys and Girls a step by step guide with photos to have all the
languages your heart desire (except Chinese) on your xda, mda and of
course htc diamond. If your preferred phone language is not Arabic, then you
can have the setting changed to WWE with your desired language enabled
to let you send and receive SMS, manage Microsoft one note and word
documents so you can read, edit and write in your chosen language with all
other MUI staying in English. To send SMS and edit in your chosen
language; you would, of course, need to add your own language keyboard
and there are plenty out there; I personally use Resco 4.1 multi language
keyboard, but that’s a personal choice. This support is available as an
extended package in htc WWE shipped ROMs for the Arab region, namely
version:
Diamond_MRII_RUU_Diamond_HTC_ARA_2.03.515_Radio_singed_Diamond_52.51.25.26_1.09.25.23_Ship which available to download from htc-Europe. If you try to download it from
the official site and you’re told that this is not suitable for your device after
you enter you SN don’t panic, htc will only let you download ROMs if your
device SN matches the region it was shipped for and that doesn’t mean that
it will not work on your European device. THIS IS DEFINATLY A WWE ROM.
If you don’t have a compatible SN and your phone is GSM, just do a Google
search for the ROM and you should find it.
For you who have flashed a ROM before,
flashing this ROM should be easy. However, I understand that there are
problems flashing 2.xx.xxx ROMs from a PC and you have to do
certain things to the ROM so you can flash it from the phone’s internal
storage.
Please read related threads for that, I used my PC to flash this rom using
olipro's NBHutil to extract the MB files from the main NBH file from the
ROM and rebuild it so it can be flashed using Diamond Custom RUU or
using the RUU that came with the ROM after deleting the SPL.NBH and the
original RUU_singed.nbh and replacing it with the modified nbh
built using NBHutil (Make sure you do not build the SPL back
into the modified NBH and have the relevant hard SPL) I’m not
going to dwell on this subject as this is not the object of this thread.
For you who have not flashed a ROM before,
if you don’t know what you’re doing and can’t be bothered reading or afraid
that if you flash your device you’ll lose your warranty; you can use a cab
file to enabble mltillanguage.
Just copyThe multillinguage cab to your device and install it on the main
memory.
This cab is, baiscaly, extracted from the same ROM and modified by a guy
called TSD over an Arabic forum, I don’t know if I can make reference to the
said forum or upload the cab as I might be breaking this forum’s rules. The
cab file is for free on that other forum. I shall leave this matter to the
Moderators to decide if I can post it or not.
The steps for installing the extended package is, of course, different if you
are flashing the ROM and you should know how to apply it. If not ask here
and I will go through it.
Whichever way you want to go, the illustration applies for both flashing and
adding the .cab file. The reason being is once you install this, your MUI will
be in Arabic and if you’re not an Arabic user you will definitely be struggling
to change it back to English. The whole idea of this is to have a WWE
device capable of handling your own language’s SMS read and write and
other stuff mentioned earlier. Now go through the pictures and enjoy.
Hi everyone
The thing I want to do is add my own language (for viewing and texting only) to the xxjk1 firmware
I have my own region files so I can copy files from it to the xxjk1 firmware
Does anyone know how can I do it?
(Is it possible after all ?)
By the way, you can flash JK1 firmware with CSC from your region (with your own language). But it must be CSC from any other firmware of Bada 1.2...
Have you tried it your self?
Is it ok to flash xxjd1 with a kc1 csc file from another region?
Yes, I often use it.
Thank you very much for the tip.
Now does anybody know the answer of the first question I asked?
thats totally wrong
just tried with XXJID and took CSC from JPKC1 and guess what happened
lost Arabic language
please find a way to fix it
I don't undestand what is wrong... I use it many times and it was working. As I said If you going to flash Bada 1.2 firmware, CSC is must be from other Bada 1.2 firmware.
Both firmwares are 1.2. so according to what u said it should work
But looks like it didn't work
Which two regions and firmwares are you yourself(baza 14) using?
Thanks for participating
For example I flashed FW JK1 with CSC from JL1 (XD region).
Oh you mean all from Europe??
i just flashed JK1 to make sure that it doesn't support Arabic too
@roostaamir
give it a try maybe it will work for you
i'll wait for ho1od until he succeeds in QMD Compression tools maybe it will fix that problem
Sorry but i don't have my wave in my own hands right now(it has a long story)
But if you can test this and share the results,I would be thanful:
Flash your phone with xxjid and the parts of jp firmware which have open arabic.each time with one of the jp files.(i mean first flash the factory-fs from the jp firmware and other parts from xxjid.then do this with pfs .... and so on)
Please tell me when will the arabic language will be in your phone.
(i mean which file caused the arabic language to be in your phone)
Thanks
that is a bad idea
i tried it before a got a really bad results
just wait for ho1od i think he will finish his tool in a few days
P.S. : Arabic language was there but appeared in squares shape (i think it is due to decoding of it) maybe your language will be another case
@mylove90 Yes, all from Europe. Maybe it is the problem.
The decoding of arabic language differ totally than european languages
that's the problem
as i now bada internal works with unicode, everything over is not important. i am a developer and we are trying to pass all string always in unicode to bada cause this is saveing the process to convert them. In my two apps i could add russian as normal letters without any problems.
The language i want to add is persian(Simillar to arabic)
What can i do?
Are u saying that there's no way to do it?
Or the new tool (being created by ho1od) can do it?
ho1od is developing Wave remaker : a small tool to make changes in the bada firmware files
CSC files (apparently contains language) have two parts the first one every one can extract it using trix and the other one is QMD compressed so no one extracted it until(as i know) now so i am waiting for ho1od to see what is in there
but i think there will be *.rsr files that contains language
http://forum.xda-developers.com/showthread.php?t=984482
Next step after (de)compress, is *.rsr edit for Display Language.
No idea which files needed for Keyboard ...
But at this time not tested, because QMD...
Best Regards
any news anyone?
Where are the language files?
Is the language file is the CSC?
Is it enough to just change the csc and language change?
If I take csc Israeli and installs it on the new version of bada
Is the device supposed to be in Hebrew now?
I changed the CSC and the language has not changed ... I've pre-configeration and nothing happened except that I now can not even choose a language ...
I wish you would answer the questions ... Thank you and good day!
same Questions as you .can someone help me ,what to do? thanks!
as i know the fonts of the languages are in rc1 file so you can read your language with rc1 but if you want to type with your lang you have to use csc file
Hebrew language
hii litebass2
nice to find more Israeli's here ...
I wish the answer was simple - actually the rc1 file is holding the language files
the keyboard the X9 settings and all
and CSC file contains the operator settings and regional settings
we need combination of both .
By the way - do you have PTR or PCL firmware for 1.2 ?
10x
before few month I flashed my phone to bada 2.0 (i have S8530 from pelephone..)
and I saw that the firmware is not hebrew..a
so I made hebrew firmware base on PCL without keyboard
cause we cant upload files to Rc1 file..and to get the keyboard files with Stune for ex.
but you have to understand its doesn't matter the "operator setting" and the "regional setting"
if you have not the files the make the
firmware hebrew you will not have hebrew on your phone
now I have the original PCL version
Because I gave the device to repair and "Pelephone" given me back new device
Tried with Wave Remaker ?
after looking and looking the net I have found PCL ver or 1.2
i have taken ( I think) all the important files from the Rc1 and transferred them to the new rc1 of bada 2.0 but I cant sign the file with wave remarker to reupload them via multiuploader to the phone
i can sign the pfs file - the csc and shp and i have great custom ver but I coudnt with rc1 file - which is the important file
did you try ?
http://forum.xda-developers.com/showthread.php?t=984482
For language support minimum requirement:
Font in *.ttf (True Type Format)
bada 1.x
System/Font (RC1 file)
bada 2.0
SystemCSC/Font (CSC in compressed part)
Text is in rsr files
SystemCSC\String
Both RC1 and CSC compressed part is hard nearly impossible to Edit now...
Please, btw...
Try to read other Threads and better deliver anwsers, instead open ever new Thread for same Question...
And nobody investigate deeper.
[Q] Is it possible to translate into another language?
http://forum.xda-developers.com/showthread.php?t=1200864
[Q] Changing the system font
http://forum.xda-developers.com/showthread.php?t=910275
Please, this time download your Firmware...
Investigate deeper and post results...
Like how to edit... *.rsr files...
You could compare for instance some files, maybe no changes between bada 1.x and bada 2.0 Strings...
I have no problem... my German is supported in every Font and English too...
Best Regards
Local font
From where I can add local font to wave?
and honestly where's the thank button?