Where are the language files?
Is the language file is the CSC?
Is it enough to just change the csc and language change?
If I take csc Israeli and installs it on the new version of bada
Is the device supposed to be in Hebrew now?
I changed the CSC and the language has not changed ... I've pre-configeration and nothing happened except that I now can not even choose a language ...
I wish you would answer the questions ... Thank you and good day!
same Questions as you .can someone help me ,what to do? thanks!
as i know the fonts of the languages are in rc1 file so you can read your language with rc1 but if you want to type with your lang you have to use csc file
Hebrew language
hii litebass2
nice to find more Israeli's here ...
I wish the answer was simple - actually the rc1 file is holding the language files
the keyboard the X9 settings and all
and CSC file contains the operator settings and regional settings
we need combination of both .
By the way - do you have PTR or PCL firmware for 1.2 ?
10x
before few month I flashed my phone to bada 2.0 (i have S8530 from pelephone..)
and I saw that the firmware is not hebrew..a
so I made hebrew firmware base on PCL without keyboard
cause we cant upload files to Rc1 file..and to get the keyboard files with Stune for ex.
but you have to understand its doesn't matter the "operator setting" and the "regional setting"
if you have not the files the make the
firmware hebrew you will not have hebrew on your phone
now I have the original PCL version
Because I gave the device to repair and "Pelephone" given me back new device
Tried with Wave Remaker ?
after looking and looking the net I have found PCL ver or 1.2
i have taken ( I think) all the important files from the Rc1 and transferred them to the new rc1 of bada 2.0 but I cant sign the file with wave remarker to reupload them via multiuploader to the phone
i can sign the pfs file - the csc and shp and i have great custom ver but I coudnt with rc1 file - which is the important file
did you try ?
http://forum.xda-developers.com/showthread.php?t=984482
For language support minimum requirement:
Font in *.ttf (True Type Format)
bada 1.x
System/Font (RC1 file)
bada 2.0
SystemCSC/Font (CSC in compressed part)
Text is in rsr files
SystemCSC\String
Both RC1 and CSC compressed part is hard nearly impossible to Edit now...
Please, btw...
Try to read other Threads and better deliver anwsers, instead open ever new Thread for same Question...
And nobody investigate deeper.
[Q] Is it possible to translate into another language?
http://forum.xda-developers.com/showthread.php?t=1200864
[Q] Changing the system font
http://forum.xda-developers.com/showthread.php?t=910275
Please, this time download your Firmware...
Investigate deeper and post results...
Like how to edit... *.rsr files...
You could compare for instance some files, maybe no changes between bada 1.x and bada 2.0 Strings...
I have no problem... my German is supported in every Font and English too...
Best Regards
Local font
From where I can add local font to wave?
and honestly where's the thank button?
Related
Hi,
as some of you already know, it seems that there are different Region Codes on the market, which have different languages enabled on the phone.
As an example, a French version has only French and English to choose from (incl. keyboard and dictionary).
Even if you try to install a new firmware from scratch, it doesn't change your language since the firmware reads the Region Code and only installs the language acc. to the code.
Sicne I don't know, where I can find this code on the phone to change it, I would like to find out if I could just overwrite soem files (see below) what I was able to find with the Linda File Manager.
If you open Linda, you can select MyPhone. Navigate to etc/firmware and please tell me how your files look like.
Mine look as follows:
default_france.acdb (123kb)
default.acdb (123kb)
fw_bcm4329.bin (236kb)
yamato_pfp.fw (9kb)
yamato_pm4.fw (9kb)
BCM4329B1_002.002.023.0298.0303.hcd (14.83kb)
Please only from such phones, which are not branded to any Operator.
What I would like to try is to overwrite them with someones files which have another European version.
Thanks
SJ
No one able to help?
Hi everyone
The thing I want to do is add my own language (for viewing and texting only) to the xxjk1 firmware
I have my own region files so I can copy files from it to the xxjk1 firmware
Does anyone know how can I do it?
(Is it possible after all ?)
By the way, you can flash JK1 firmware with CSC from your region (with your own language). But it must be CSC from any other firmware of Bada 1.2...
Have you tried it your self?
Is it ok to flash xxjd1 with a kc1 csc file from another region?
Yes, I often use it.
Thank you very much for the tip.
Now does anybody know the answer of the first question I asked?
thats totally wrong
just tried with XXJID and took CSC from JPKC1 and guess what happened
lost Arabic language
please find a way to fix it
I don't undestand what is wrong... I use it many times and it was working. As I said If you going to flash Bada 1.2 firmware, CSC is must be from other Bada 1.2 firmware.
Both firmwares are 1.2. so according to what u said it should work
But looks like it didn't work
Which two regions and firmwares are you yourself(baza 14) using?
Thanks for participating
For example I flashed FW JK1 with CSC from JL1 (XD region).
Oh you mean all from Europe??
i just flashed JK1 to make sure that it doesn't support Arabic too
@roostaamir
give it a try maybe it will work for you
i'll wait for ho1od until he succeeds in QMD Compression tools maybe it will fix that problem
Sorry but i don't have my wave in my own hands right now(it has a long story)
But if you can test this and share the results,I would be thanful:
Flash your phone with xxjid and the parts of jp firmware which have open arabic.each time with one of the jp files.(i mean first flash the factory-fs from the jp firmware and other parts from xxjid.then do this with pfs .... and so on)
Please tell me when will the arabic language will be in your phone.
(i mean which file caused the arabic language to be in your phone)
Thanks
that is a bad idea
i tried it before a got a really bad results
just wait for ho1od i think he will finish his tool in a few days
P.S. : Arabic language was there but appeared in squares shape (i think it is due to decoding of it) maybe your language will be another case
@mylove90 Yes, all from Europe. Maybe it is the problem.
The decoding of arabic language differ totally than european languages
that's the problem
as i now bada internal works with unicode, everything over is not important. i am a developer and we are trying to pass all string always in unicode to bada cause this is saveing the process to convert them. In my two apps i could add russian as normal letters without any problems.
The language i want to add is persian(Simillar to arabic)
What can i do?
Are u saying that there's no way to do it?
Or the new tool (being created by ho1od) can do it?
ho1od is developing Wave remaker : a small tool to make changes in the bada firmware files
CSC files (apparently contains language) have two parts the first one every one can extract it using trix and the other one is QMD compressed so no one extracted it until(as i know) now so i am waiting for ho1od to see what is in there
but i think there will be *.rsr files that contains language
http://forum.xda-developers.com/showthread.php?t=984482
Next step after (de)compress, is *.rsr edit for Display Language.
No idea which files needed for Keyboard ...
But at this time not tested, because QMD...
Best Regards
any news anyone?
how to install customize themes on S8530XPKG6
when i try to install says unsupported file. thanks for advance.
Sorry but how its possible to find theme for BADA 2 if its beta and theme creator doesnt existe, then now i try to dump file to change it but its other compresed system not like bada 1.2 RC1 !!!
For 1.2 to exract Flash and png its easy
Hexedit PNG Bigining 89504E47 End AE426082
This way you can find it too in bada 2 firmware rc1 but its other compression algorithme maybe some one can helps or tell us if isnt signed 1024rsa !!!
Wait! Any .smt file cam installed on Bada,right? Be it any version?
Here is What i do
1. Connect the phone to Stune 1.0.6*
2. Under the Browser tab Go to AppEx\User\Theme\Download
3. Copy your *.smt file**
4. Disconnect and you will find the theme in the Display menu in the settings
*: New Stune 1.0.7 Doesn't work with bada 2.0 (1.0.6 is attached)
**: the file should be adapted for 2.0 themes so don't use 1.2 themes
P.S : i tried to add a font in AppEx\User\Font\Download and it appeared in the menu put when chose it wasn't applied correctly
Best Regards
@mylove: Great news that the fonts are appearing in the settings! But what do you mean with "it wasn't applied correctly"? Was there some error message?
After applying it i noticed that i got the default font and nothing changed
there was no error messages at all
Maybe we need a special font format not like the regular *.ttf files used with PC
Best Regards
Maybe the fonts need to cover special characters for other languages. Please try the font in the attachment.
mylove90 said:
After applying it i noticed that i got the default font and nothing changed
there was no error messages at all
Maybe we need a special font format not like the regular *.ttf files used with PC
Best Regards
Click to expand...
Click to collapse
hi mohammed
i use arabic fonts from bada 1.2 on xpkg6 but it didnt work
is there any way to put arabic fonts into bada 2.0.1 to view arabic or persian text?
st0rmi said:
Maybe the fonts need to cover special characters for other languages. Please try the font in the attachment.
Click to expand...
Click to collapse
Tried it the Same issue
civil.scholar said:
hi mohammed
i use arabic fonts from bada 1.2 on xpkg6 but it didnt work
is there any way to put arabic fonts into bada 2.0.1 to view arabic or persian text?
Click to expand...
Click to collapse
Don't know yet
Best Regards
Go to the android app store online...downlaod a font and see the format it is in.....IDK how to see the format....!!! It will be in the same format i believe!
Just use Tkfile !!!
In Bada 2 Theme its realy different then bada 1
Its all Flash animation.
I prefered KD6 icon because its much bigger and gui its much faster
Check this tread and have fun.
Please request if more CSC files are needed and please specify witch ones are needed.
http://www.mysamsungwave.com/index.php?topic=10277.0
Thanks
can you download it ? i can't register thank you
Hello I would love to see a CSC file for the Netherlands. My original CSC was XEN. I can provide u with this CSC but does it have to be a certain CSC ore will any XEN csc do the trick? As soon as I know what CSC u need I will upload it and provide the link.
Thanks in advance
here the link to csc_s8500_open_europe_common_XENJF3
http://www.mediafire.com/?codbcu27te1ov0m
tnx...it's work on S8530 ???
what about css file for israel?..
i am cheaking there
litebass2 said:
tnx...it's work on S8530 ???
what about css file for israel?..
Click to expand...
Click to collapse
i found out where is the PTR xml but if you at cellcom or pelephone you need to go to Stune after connecting you phone into it and go to CSC coustomer and click on it and a list of all the CSC on your phone will popout and then right-click the PTR or CEL or PCL
PTR = Orange
CEL = Cellcom
PCL = Pelephone
and copy the coustomer.xml
and then pick the foldor you want to save it there and then after you flashed to the new firmware you agine got Stune and pick a CSC that you will not use and then you replace the xml of the unneeded CSC with the copied xml and your phone will reboot and everything eles is on the guide the toxic gave
I cant find VIA in pre config
atelier0807 said:
I cant find VIA in pre config
Click to expand...
Click to collapse
VIA was used as a example
Upload it to KOR or something you see in the pre-config list
are there any Canadian CSC? thanks
@toxicdust
Thank u for uploding XEN CSC I tried it but it resulted in chinees language (had to change it by remembering were u can change language in settings menu) keyboard language was chinees too wich I could not change even when I set it to Nederlands it kept chinees . Internet settings were not found had to do it by hand. Am i doing something wrong? can u help me out here?
thanks in advance
How can I add keyboard language in bada 2? (Wave 3)
I bought Wave 3 and there is no Arabic, only English.
I succeeded to add Arabic to the menu, but now I have only Enlglish keybard, and I need Arabic too.
PLEASE HELP ME!!!
Go to keyboard option that is on your keyboard (the small icon which is the same than the "parameter one"). Then keyboard language. There, you can choose all the keyboard you want to add. After that if you want to change the keyboard you are using you just have to click on the button where are the two first letter of the language. For exemple in english it is "en".
Arabic S8600 Firmware should be this here...S8600JPKK4/S8600OJPKK3
Otherwise no arabic Language...
Read this too...
http://forum.xda-developers.com/showthread.php?t=984482
Best Regards
Thank you adfree!!!!
But I want know how to add more language in myself.
I understood that it something in OpAsiaIME.so file, but I don't know how to open this file type or how to edit it...
I understood that it something in OpAsiaIME.so file, but I don't know how to open this file type or how to edit it...
Click to expand...
Click to collapse
Problem, it is not easy and no complete solution available...
Especially for S8600 users...
So you can choose. Between Original S8600 Firmware with arabic support...
Best Regards
Sorry shaiws I misunderstood your question...
adfree said:
Problem, it is not easy and no complete solution available...
Especially for S8600 users...
So you can choose. Between Original S8600 Firmware with arabic support...
Best Regards
Click to expand...
Click to collapse
If I have OpAsiaIME.so file in Shp folder in Shpapp file, I need to install only CSC with Arabic, and I have Arabic keyboard?