Develop Bugs

99% T-chinese & S-Chinese ROM here <QTEK 130 ROM>

---------------2006/May31 Updated---------------------------------------
------------------------------------------------------------------------------
＠繁体字OS
Traditional Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHS130.rar
＠簡体字OS
Simplized Chinese ROM <QTEK 130 AKU2 + A2DP +Push Mail ROM>
ftp://[email protected]/Universal/DarkForce_CHT_130.rar
PLS use Extrom files which are in above archives to run correctly
See the detaile on next page and use as your own risk!
----------------------------------------------------------------------------
----------------Previouse POST-----No More following ROM----------
it took 2 hours to upload!!!!
http://www.asukal.jp/123/imate13_CHT.rar__65MB
Traditional Chinese130764 Universal
@Upgrade_Utililty.zip
*nk.nbf was my edited ROM of i-mate "JASJAR_WWE_13076_164_10900_wwe_ship" with
the wince.nls and Tarisk Font, enable to encode Japanese/S&T Chinese/Korean/Thailand.
(80% of its interface is Traditional Chinese)
*Radio.nbf and ms_.nbf are not included. pls dl offical one to flash.
*use MaUpgradeUt_noID.exe to make Falsh the ROM.
suggest to connect PC with "Sireal mode" = Light button + Power button +Stylus.
------------------------------------------------------------------
***The Templates.zip and Extrom_Unhider.cab---and Asukal.cab
@while first boot from Flasing ROM, some letters are not discribed correctly,
Such like a ????????. do not care.
@The Doctor Johnson screen to aline the stylus will be come every time after soft reset.
Please delete the short cut of "Welcome.exe" in the \windows\StartUp folder.
No more Dr,Johnson.
@using a Pocket Word, to make New Documents, you will find the error.
You make the "Templates" folder in My Documents with Chines Folder name.
The place the all templates in this archive.
No more error.
@Asukal.cab.==pls install this after finish 1st reboot from installation of Extended ROM files.
Then make soft reset again.
@Extrom_Unhider.cab is to unhide the Extended ROM.
Old Unlocker is not work, just install this cab and make soft reset,
ExtROM will visuable and workable.
http://forum.xda-developers.com/viewtopic.php?p=240986&sid=9e9c8acfa34bb46c11688318be09adb4#240986
Thanks for Mr.sef
Still not perfect and sometimes hang up if you toggle the Today Plug-in.
Pls try as your won risk.
If you feel so bad coz of the OS is not stable, pls use without Asukal.cab.
Less Chinese Interface, but more stable.
or make disable the Device Lock on the Today Screen.
Good Luck

Thanks again for the great word....
Actually I prefer to use English OS interface with the ability to read chinese only.....(I think it should be easiler to build??)
But this one is ok as I didn't install your cab file.
Thanks a lot.
Cheers,

Thanks again , will try today

CJK+Thai wince.nls and font in New I-mate ROM1.3
this is the new one only wince.nls and font, also font registry.
http://www.asukal.jp/123/v13enROM_CJK.rar 65MB
radio.nbf and ms_.nbf for Extended ROM, are not included)
PLS try, so nice! i hope...
1st one i uploaded, if you use Asukal.cab, the more mui can work.
those mui were made from old WM5, so they are not match well with
new os.
for example, thres.dll, old version dll doesnt have "Device Lock",
But new thres.dll have it, so if you use Device Lock on Today, OS will hang up.
Many of dll are different from OLD WM5, i suggest this rom only use for
test.(but without using asukal.cab, not so bad)
Good luck!

The first one after flush look great but install Asukal.cab the today plugin
will be stop try to reset can't be done.
try to install Sino_SIP_No5.zip to hand write , don't work please advise ,
also Monster SIP can't use either , I will text tomorrow and give you freeback

the default chinese input method from dopod 900?
hi asukal,
can you include the chinese input method from dopod 900 to the wwe rom devices?
need it very much!
hanks
Parker

[email protected]
ya, i have found many difference in dll between previouse and new ROM.
so some of mui is not compartible.
i found after made this 1st rom
so i suggest do not use asukal.cab pls, or use 2nd rom.
now i making new mui with dll from new rom.
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and

i am willing to get it for you!
but how?
can you tell me how to do it?
thanks!

Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want

Dopod_files.rar
mwang said:
Asukal said:
[email protected]
to inject and enable Chinese SIP from DOPOD will be much hard work.
and i need get full registry and relative dll and dic files.
do someboday sent me a whole registry from Dopod900 chines OS?
i will try but take time and
Click to expand...
Click to collapse
Asukal, Dopod files and Modules upload to universal upload folder -- Dopod_files.rar hope that you want
Click to expand...
Click to collapse
Excuse me,Would you tell me how to use the Dopod files.rar?

thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.

Asukal said:
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
Please pm to me how to get it ,I will doing tonight

Dumping chinese ROM
Asukal said:
thanks,
but Module and file....i guess those dumped files are dead PE Header.
i need dll with correct PE headers. OK i will dump chinese ROM by my self.
but
i need whole registry value from live device, not from hive in rom.
because all 2bites registries are only in a live device, not in hive.
Click to expand...
Click to collapse
That's a great message, I'm waiting your dumper,and tell me how to return to Universal.
Thanks

How to solve inputing Chinese?
How to solve inputing Chinese?
Ce-star or system itself

No SIP for chines in it now.
you must install your favorite SIP.
to get the registry, use TRE (Tascal registry editor and export registry on device,

Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm

T-Mobile English ROM Bluetooth StereoHead set Profile
Today, the new rom of T-Mobile WWEnglish ROM with A2DP was uploaded.
i injected wince.nls and fonts which can be supported CJK+Thai in that.
uploaded here<no Chinese SIP and Interface,Just encode & font support>
http://www.asukal.jp/123/T-Mobile_A2DP.rar 52MB with MaUpgradeutlity.exe
see the captured screen shots.
http://asukal.seesaa.net/article/14749754.html
<no radio.nbf and ms_nbf were included. you have to dl from
http://forum.xda-developers.com/viewtopic.php?p=246434#246434
or
UNI_TMUK_12032_120_10600_Ship.exe
ROM version 1.20 lower than i-mate 1.30_AKU2

Thanks a lot again. I want the A2DP!!!! Yeah.

mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
ya, i got it.
but it is not sure it can work or not
must check all regostry one by one.
i tried in my passed, still not good result.
any way, pls wait with long sight!
now i must make many kinds of rom for Japanese guys,
also trying to Get A2DP to i-mate ROM(very low possiblety to get)
also make new mui interface for AUK2,
also have to have a dinner!
also have to ,,,,,,

mwang said:
Asukal said:
to get the registry, use TRE (Tascal registry editor and export registry on device,
Click to expand...
Click to collapse
Done , see your pm
Click to expand...
Click to collapse
i am checking all registry from you.
question, i have found following value.
Is the "HanWang" one of OS SIP, or 3rd parties one installed by you?
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang]
[HKEY_LOCAL_MACHINE\SOFTWARE\HanWang\HangWang Pen for WinCE]
"Study"="0"
"Sound on"="1"
"Screen segment"="1"
"Default input panel"="0"
"Ink speed"="10"
"Ink width"="1"
"Ink color"="0"
"Ink type"="2"
"Recognizer delay"="400"
"Recognizer range"="600E"
Wait for your rplay.

Asian Languages Supported QTEK 1.30 ROM with A2DP+Push Mail

based on QTEK 1.30 ROM .Asian Language Suport ROM is here
Dlownload from Here!
http://www.asukal.jp/ROMs/Qtek_CJKT_130.rar 54MB
ROM has
1;Asian support All in One font <thailand / Japanese / Simp-Trad Chinese / Korean>
2;also Asian Language Encoding support wince.nls, enable encodeing in INBOX, IE,
also able to run Loclized Applications
3:Extended ROM is opened in Default
4:CAB install Security Prompt was killed <but after QTEK Extended ROM files were installed,
it will revive again, you must kill it again
5nly OS ROM image <NK.nbf> was included. Radio Image and Extended ROM image must prepared by yoursel.
6;Chinese and Japanese font for ClearVue also in this.
Enable PDF view in Chinese * Japanese
i tested on my jasjar, no problems, but now many gusy have faced the problems after flush NEW ROM.
After flushed ROM, the device was Stucked on Splash Screen.
So you must know flushing ROM is dangarouse and do it as your own risk.
i can not take responsibilty.
<My Exec also died after flushed I-mate latest 1.30 ROM>
-------------------------------------------------------------------
*default keyboad Rayout is Japanese <0411> you can change Valu as your Country code
[HKEY_CURRENT_USER\keyboard layout\Preload]
@="e0010411"
[HKEY_CURRENT_USER\keyboard layout\Preload\1]
@="e0010411"
*nls value in Registry is also Japanese, yu can change it.
HKEY_LOCAL_MACHINE\nls]
"DefaultLCID"=dword:00000411
"DefaultACP"=dword:000003a4
"DefaultOCP"=dword:000003a4
"SystemLCID"=dword:00000411
"LegacyLocaleMode"=dword:00000001
*Internationa Default code also set as Japanese code 0411.
Addjust as your like
[HKEY_LOCAL_MACHINE\Software\Microsoft\International]
"ACP"=dword:000003a4
"LCID"=dword:00000411
****USE registry editor to edit avobe, or one of my friends created
Aplet to able change some of those value with Graphical Inter face.
Namede JUflounder.exe
you can download it free! thanks to him
http://aimakidechi.hp.infoseek.co.jp/jasjar/contents_007/contents_007-002-en.html
Enjoy it!

Thanks, has it included the Chinese IME (like Pinyin by keyboard)?

sorry no china-japanese ime on it.

i didnt succeed to get any Chinese SIP with Hard Keyborad support,
But some Soft Input Panele include hand writings are here.
http://xdao2.seesaa.net/article/12029203.html
Go to option, you can switch the option language to Chinese or English.
Also input Letters can be swithced Simple or Traditional Chinese.
Sorry no support and use as your own risk.
also some tipes are on
http://xdao2.seesaa.net/

Did you mean thai font include?

wammy28 said:
Did you mean thai font include?
Click to expand...
Click to collapse
ya, uesed a Unicode font included Thai font<i dont know it cab be beautifull to use for You Thailand Guys>
PLS see the Captures here
http://asukal.seesaa.net/article/9314068.html
Thai Font+Both Chinese+Korean+Japanese into one font.
also Reginal setting and Encode in IE and Inbox
PLS see here for that
http://asukal.seesaa.net/article/6290940.html
http://asukal.seesaa.net/article/9323597.html
***Japanese Site, so you can see only Captures!*****

Thanks for you quick response
I already tried it. Thai font work very well. You can see my post from here http://www.pdamobiz.com/forum/forum_posts.asp?TID=56426&PN=1&TPN=1
However, some thai characters don't display especially thai characters in the third (top) row (I thought you known that thai language has 3 level of display). I'm very interesting to your work. Unfortunately , I can't read japanease. If anything help to improve this ,tell me.

Extremely good thanks!
But has a question When establishes the e-mail box 1. Mailbox address input OK 2. Segment OK 3. Name account name password OK4.POP3 hypothesis e-mail box name OK. The fifth step cannot go in afterwards Why? Regional settings I use Chinese (Taiwan) thanks!
Dopod 900
rom 1.13.36 CHT
radio 1.09.00
extrom 1.13.134 CHT

first of all, pls flush Geniune Qtek Extended ROM also.
this may have device drivers or important files.
size is totaly 750kb all CAB
also QUESTION for all gusy flushed my rom.
My ectrom has opend, you may also.
But i cant write and delete files into Extrom.
How about yours??
can you write or delete files?
it seems to be written or delete, they will returen to default after soft reset
:shock:
ming15> i can finish set up of e-mailaccount.
i dont think it will not be able to go step 5.
pls try again or flush rom again.
wammy28>the thai font problem is coze of the Font I injected.
due too no knowlege of Thail language for me,
i coudnt fount it.
i used Uniceode font, one font included Multi Languages FONTs.
i prefere use this font or another Unicode font.
But very few Unicode font has such like many Language support.
If they have, the size of Font will be 20MB or 30MB like a cyber unicode font.
i think if you thailand guys need correct one.
we must make another ROM for Specialize Thiland Language.
good luck!

I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.

ming15 said:
I can delete files into Extrom. and they will returen to default after soft reset .
I flush rom again. it still not be able to go step 5.
Click to expand...
Click to collapse
i got made Special tools with Buzz's tool. to unlock extrom for New Qtek<if cant unlock with old tool>
DL this one, and remove all previouse unlock tool if you use already.
<hard reset is better>
Install this can, the go to Start Menu and find Unlocker Icon,
And Excute this, make soft reset.
Mabe you can get Extrom free!

hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's

alisultan said:
hi thair
very nice work from Asukal could we do the same for arabic languge if so what do we need
thank's
Click to expand...
Click to collapse
of course you can do that!
just replace wince.nls in ROM and inject Arabic font also into ROM,
then add the fontlink registry of default.hv.
thats all, if you upload Arabic font and registry and wince.nls here,
i can make you soo!
But if later than today, i have no time till at theend of May due to business trip!
My summary to ROM cook is here
http://www.asukal.jp/hv_rom/default.htm

Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!

kimlui said:
Can this rom use for O2 XDA Exec?
I have use MaUpgradeUt_noID.exe to flash it.
After successful & reset, the screen still at bootloader mode.
If this roms can use for XDA Exec, what shold I do?
Thanks!
Click to expand...
Click to collapse
ofcourse u can use in Exec,
you problems is one of troubles while upgrading,
USB mode?　right?
try to use UNI_ExitBootloader.exe by Buzz,
http://forum.xda-developers.com/viewtopic.php?p=254595#254595
hope you can get out from Bootloader.
So all guy who want to try upgrade, pls read following thread well and
must be know unofffial upgrade has some dagerouse with u!
here! please read well.
http://forum.xda-developers.com/viewtopic.php?t=43592&postdays=0&postorder=asc&start=0
i told you all again! i can not take any responsibilty even you will be in trouble with upgrade. This ROM doesnt have problem, but can not gurantee!
My Exec also have still stucked on Splash Screeen by myself after try Upgraded with Offcial I-mate rom. still......
Giood Luck!

thank's for reply
but wher could i gent wince.nls for arabic , i have thes file from a thaird party software do you mean this one and i inclood the font as wel please check
thank's

[release] Schap's WM6 Pro 3.57a-CCS (with CHT/CHS/JPN support)

Hi all,
This is a ROM based on Schap's ROM with additional chinese/japanese support, it is still an english based rom but is capable to display chinese and japanese, I also added in the Tao's 10 Buttons Kaiser CommManager and some useful programs. However, the Advanced Configurator is not working because of the new commmanager.
Features:
* Everything from original ROM
* Default theme changed to HTC black theme
* Included Tao's 10 buttons Kaiser Comm Manager
* Patched wince.nls to support Chinese/Japanese/Korean (Korean will need extra fonts)
* mingliu.ac3 font for Chinese/Japanese display
* G4 SIP Changer for SIP configuration.
* GSFinder+ v1.04 for Explorer replacement
* ClearTemp v0.9.3
* PIM Backup v2.5.0.0
* HTC Network Wizard (apparently I found it not working after I upload this ROM , I will fix it up in the Schap's new upcoming ROM, sorry )
* Removed Automatic operator settings configuration, SuperBright (VJLumosIII), FieldTest 1.57
* Move VoIP Setting & Advanced Configuration Tools from Ext ROM to main ROM
credit goes to original Authors
for my reference only: Benchmark
anyway.. give it a try
http://www.sharebig.com/share.php?id=s12htpsovnrPtfYyu

Some questions:
-The most important:
* If I use for Japanese, what is the default, Hiragana or Romanji input? What is the default SIP?
-Other:
* Is it based on Schap's normal or lite one?
* How is the way to chose between CHT/CHS/JPN?
Thanks!
PS: Ask for help; I already have two doubts about Japanese support that maybe you van help me:
1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
2º)Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)

Keyboardlayout
Hi
how can I change the Keyboardlayout from English to German because I have German hardware?
Thanks

ist the final relase or is it stell beta

Great work!! why not reupload the HTC Network Wizard fixed??
BTW, any chance to use VP3G's V3.0 for CHT support??

Do you mean this rom support both Traditional and Simplified Chinese when using some ebook reader such as isilo, etc? Thanks.

sesaru:
first of all, it does not contain any language specific SIP, therefore you can install the one you preferred... The ROM is based on the normal version, you dont have to switch in between chinese/japanese as the GUI is in English but support read/write in chinese/japanese.
in addition..
1. for the SIP problem, try http://forum.xda-developers.com/showthread.php?t=271008 , not sure if it works or not... just give it a try
2. as for the Yahoo! Keitai, I have no idea on how to access it, I tried to search on Google but there is no any information about how to connect it.. so..
Mark_XDA:
Originally, the application Advanced Configuration Tools that comes with the ROM has the ability to change it for you, however, since I change the Comm Manager to the Kaiser looks, the program crashes everytime when we start it, so the only way to change it is to edit Registry manually...
you can find the answer in this page
moshmoshkelah:
There is no final or beta, Schap's ROM is final, but I will make a new one if a new ROM I like is released.
Penske MB:
I'm too lazy to pack another one... especially when my internet connection is only 1.5m/256... you know..
VP3G? if you want I can quickly cook one for you, let me know which version you want (BBC or official)...
yamchung:
Oh well, I didnt really try to read an ebook... but to browse CHT (big5) and CHS (gb2312) websites are fine, so as long as the ebook program allow you to change encoding, it should be fine.

I can livw with any offical or BBC. My company just gave me a BB phone, so...
thanks in advance.
RickyLan said:
sesaru:
first of all, it does not contain any language specific SIP, therefore you can install the one you preferred... The ROM is based on the normal version, you dont have to switch in between chinese/japanese as the GUI is in English but support read/write in chinese/japanese.
in addition..
1. for the SIP problem, try http://forum.xda-developers.com/showthread.php?t=271008 , not sure if it works or not... just give it a try
2. as for the Yahoo! Keitai, I have no idea on how to access it, I tried to search on Google but there is no any information about how to connect it.. so..
Mark_XDA:
Originally, the application Advanced Configuration Tools that comes with the ROM has the ability to change it for you, however, since I change the Comm Manager to the Kaiser looks, the program crashes everytime when we start it, so the only way to change it is to edit Registry manually...
you can find the answer in this page
moshmoshkelah:
There is no final or beta, Schap's ROM is final, but I will make a new one if a new ROM I like is released.
Penske MB:
I'm too lazy to pack another one... especially when my internet connection is only 1.5m/256... you know..
VP3G? if you want I can quickly cook one for you, let me know which version you want (BBC or official)...
yamchung:
Oh well, I didnt really try to read an ebook... but to browse CHT (big5) and CHS (gb2312) websites are fine, so as long as the ebook program allow you to change encoding, it should be fine.
Click to expand...
Click to collapse

Thanks
Thanks a lot for that. Will try it out tonight. Can u do the same ROM for Trinity (D810) for Hong Kong users....?
Thanks again.

Penske MB:
Enjoy
Code:
http://www.megaupload.com/cn/?d=VU5RSKCS
chris_khho:
Sorry I'm not able to cook the ROM for Trinity as I dont have a D810 with me and I dont want to brick you guys mobile phone

tHANK YOU VERY MUCH. iS THIS A OFFICAL OR bbc version?
RickyLan said:
Penske MB:
Enjoy
Code:
http://www.megaupload.com/cn/?d=VU5RSKCS
chris_khho:
Sorry I'm not able to cook the ROM for Trinity as I dont have a D810 with me and I dont want to brick you guys mobile phone
Click to expand...
Click to collapse

Wisbar Font
When I use wisbar version 2.8, the font on the start menu and the bottom soft button seems to small. Any advices please?
(For normal (non-wisbar) start menu, the font is ok.)
Thanks.

Penske MB:
BBC version... but I don't know if it still works after I repack it
chris_khho:
Sorry I afraid I'm not able to answer this question to you as well , you can try to edit the theme file or edit your registry see if that help:
[HKEY_LOCAL_MACHINE\nls]
"SystemLCID"=dword:00000404
change it to:
"SystemLCID"=dword:00000409
however, as for the D810 problem, what you can do is get a ROM you like in the Trinity section and use the chinese language pack available here

Do you mind to explain how you add the chinese support to the ROM file? which kitchen are you using? and where did you find the win.nls file?

rshen:
I dont use any of the kitchen, I tried bepe's kitchen before however the CHT one didnt work well, so I decided to use cooked ROM and reheat again
all I do is,
1. use NBHextract to extract .nb from .nbh
2. use NBDump.bat to dump .nb file into a folder
3. put mingliu.ac3 and replace wince.nls into the folder
4. use koch's tools to edit default.hv / user.hv (registry)
5. use NBBuild.bat to build .nb file
6. use koch's tools to build from .nb file to .nbh file
that's all

Schap's WM6 Pro 3.54b seems like a mature ROM, and maybe a great idea to do a CHT support

Penske MB said:
Schap's WM6 Pro 3.54b seems like a mature ROM, and maybe a great idea to do a CHT support
Click to expand...
Click to collapse
Yeah... I downloaded the ROM but forgot to bring it back home, I'll cook it tomorrow nite and see how it goes

Sounds great!!
RickyLan said:
Yeah... I downloaded the ROM but forgot to bring it back home, I'll cook it tomorrow nite and see how it goes
Click to expand...
Click to collapse

Hi Rick,
2 small issue might need your help:
1. the Chinese music title will not display correctly while setting region to (Enlish United States), and I have to set to Taiwan or HK to display coeectly. But if I set region to Taiwan, the phone number will not display the way I wanted. For example: The regular view of any incoming call display as: (626) 555-7777, and it will only display as: 6265557777. No "()".
2. The phone address book does not display right on my Mercedes. The old version will shows address book and call history.
See if you can help out. This is an issue with all ROM with CHTsupport

any update?

Chinese language support on Schap's 3.57a

Can anyone please tell me what do I need to install so I can view simplified Chinese?
I have a bunch of MP3 songs, and they all appear as #$!^^&%!^. Is there a Chinese font library I can install?
Thanks.

try searching wiki - keyword "chinese",or install CE-Star

Thanks a lot! I only used the search function before, that I didn't find anything. Next time, I'll try wiki before post a new thread.
ta

Another question!
How come China is missing from regional settings? Is there a way to set it up?
Thanks in advance.

racoon82nz said:
How come China is missing from regional settings? Is there a way to set it up?
Thanks in advance.
Click to expand...
Click to collapse
you need to use other wince.nls to get back the regional settings. You can get this from dopod-HK rom, or download a trial copy of CE-Star and looking in it. The size should be 1.x MB
If you know how to dump the rom, you can replace the wince.nls then repack it back to .nbh
if not, you can try to direct replace it from a running hermes. (not sure if this still work; i used to success with this when use LVSW ROMs)
if both not work, you can use CE-Star which it will change all the settings for you.
hope this help.

[i780] FR rom connection fix

Hi,
I want to create a bin file with my dumped rom (HHC2 FR), with the Samsung i780 kitchen 0.2 beta, but there is a connection issue.
Like famusc wrote in his post, the problem can be fixed by use another bin with the same language for the conversion. But all the bin I found has this problem.
Does anyone have an old french rom which works fine ?
If not, do you know how to fix this issue ?
Is it possible to fix it with the use of another rom language for the conversion ?
If I find a way to fix it, I'll upload it here.
Thx.

No one can help me ?

We have the same problem with the German rom. It seems that we can't use the kitchen to cook the rom and have to find another way. But here comes the problem. Maybe someone could give us advise....

mievalt said:
We have the same problem with the German rom. It seems that we can't use the kitchen to cook the rom and have to find another way. But here comes the problem. Maybe someone could give us advise....
Click to expand...
Click to collapse
I am inclined to port my WM6.1 release to "some" euro locales (Germania, Italino, French etc) I have ideas on how to do that but I don't think I have the time to selectively port the required MUIs.

I understand that, but maybe you can give us hints on how start filtering the MUIs or what you think we have to do. Just replacing the zylonite_keypad_Us.dll and the S00x files brings the result that the layout changes but the mouse and the touchscreen seem to not get along with it...
What do you think???

mievalt said:
I understand that, but maybe you can give us hints on how start filtering the MUIs or what you think we have to do. Just replacing the zylonite_keypad_Us.dll and the S00x files brings the result that the layout changes but the mouse and the touchscreen seem to not get along with it...
What do you think???
Click to expand...
Click to collapse
Changing the keyboard driver alone will not be sufficient. You need to have supporting MUIs to make them work in harmony. The MUIs need to be salvaged from pure Fr (for example) rom which runs on the desired DPI. IE, the MUIs must be extracted carefully out from the donor rom and then placed in the kitchen with the proper rgus that correspond to the Lang ID. But finding intact MUIs can be a problem in itself. Was there any official release for i780 Rom in Fr?

I don't know if there was in France, but in Germany we have an official release and I have the dumped files extracted from the clear german rom too...

mievalt said:
I don't know if there was in France, but in Germany we have an official release and I have the dumped files extracted from the clear german rom too...
Click to expand...
Click to collapse
So I assume that Germanic keyboard is applicable to Fr as well?

No don't think so because in France they got azerty and we here in germany have the qwertz layout. We just have to change the Y and Z... I don't know if it makes that easier... So you think that replacing the zylonite_keypad_Us.dll or editing it is not he right beginning...?????

mievalt said:
No don't think so because in France they got azerty and we here in germany have the qwertz layout. We just have to change the Y and Z... I don't know if it makes that easier... So you think that replacing the zylonite_keypad_Us.dll or editing it is not he right beginning...?????
Click to expand...
Click to collapse
I think you are on the right track, just that you can't rely 100% on that alone. If you are familar with rom cooking, then you can explore with sourcing out for MUI files from other roms (not necessarily i780) and do trial and error in cooking them.

Ok thanks for helping... I will try some MUIs from other ppc. But I think the problem is that the zylonite_Keypad_Us.dll is Samsung made think...

Thx for helping.
Is there a simple way to just fix the connexion issue in an fr rom ?
I have the raw files, the bin file and I just want to make change to this rom.
The connexion issue is : there is no connexion at the first start of windows mobile, IE and WLM don't work...

I only want to correct this bug, can anyone help me ?
Can I fix that by edit reg config ??