Audiopara for Artemis - P3300, MDA Compact III ROM Development

Hi all Artemis Experts
Can anybody help me with increase of in-call ear-piece volume. Did a lot of searching....seems lots of other phones do have this audiopara to make the sound much much louder. Any help will be tremendously appreciated.

Hallo Earthwind3
Regedit
HKLM/Software/HTC/AUDIOGAIN/EAC_GAIN_HEADSET max 79
HKLM/Software/HTC/AUDIOGAIN/EAC_GAIN_CARKIT max 79
HKLM/Software/HTC/AUDIOGAIN/EAC_GAIN_EMBEDDED max 79(with DWORD max 119)
Gruß Fredelius

Hi Fredelius
Thanks a ton for the quick resoponse. I did changed the key to 79->soft reset and yes it did increased the volume but only a bit. But I guess I sod be happy with it. Would be great if there was any software to make it more.

Hi all
Are you all satisfied with the earpiece volume in Artemis. Please help me with an audiopara.csv for Artemis. There's lot in the net but not for Artemis :-(

Hi Earthwind3
Test it....
Gruß Fredelius

Hi Fredelius
Thanks again for the reply. I know about this -SRS. Actually, I wanted to increase the sound of the earpiece since I am in a noisy environment. Check the link below.
http://forum.xda-developers.com/showthread.php?t=513013
I have did the above link steps exactly but no good for Artemis. Thats why wondering whether any audiopara or relevant software to bost earpiece volume.

Related

HTC S620 AudioGain default registry values

Hello guys,
While trying to have a louder sound when I listen to music on headphone, I tweaked the registy and now I don't have any sound when playing a music file. I do have system and call sound though (hopefully).
I have a HTC S620 with WM6.
Can someone give me his default value for the following registry keys :
HKEY_LOCAL_MACHINE/Software/HTC/Audiogain
CODEC_GAIN_HEADSET (00 think)
EAC_GAIN_HEADSET (67 I think)
EARDPHONE_UPLINK_VOLUME
ENABLE_AUGA_HEADSET
HEADSET_UPLINK_VOLUME
Thanks in advance for your help.
EZToms
Dunno exactly how to fix your current dilemma but in the future I believe smarttoolkit has a control for max volume for the s620.
In fact, I know exactly which registry keys I modified but didn't write the values before changing them. So I just need that someone looks at his registry and give me the values he has for those keys.
So if someone has a minute to have a look on his phone, I'd be thanksfull.
Regards,
EZToms
This is a good thread to read:
http://forum.xda-developers.com/showthread.php?p=1096791#post1096791
EAC_GAIN_ EMBEDDED was 70, going to 80 or over wipes out the sound
RECEIVE_UPLINK 19
CODEC_GAIN_EMBEDDED 70
EARPHONE UPLINK 15
Try those and if that doesn't get it, I'll get the others for you.
Still no sound in media player. If you have the few missing one so I can try.
I copy these from my S620:
CODEC_GAIN_HEADSET 07
EAC_GAIN_HEADSET 67
EARDPHONE_UPLINK_VOLUME 10
ENABLE_AUGA_HEADSET 00
HEADSET_UPLINK_VOLUME 11
Thanks a lot, I will try those
let me know if you need all data from there
best of luck m8!
No Windows Media/Ringer sound
Help - I have a similar problem ...
I overtweaked the settings to death.
Can anyone post the definitive complete set of default settings for
Audiogain (and Audiogain)
Reinstalling 6.1 is really not an option I want to try just yet (it took me months to finally get it workiing - with those odd email/smtp problems ... but that's another thread).
I think posting the complete set of default audio settings would help a great many people here (and even better if we can eventually get a set of optimized audio settings).
Thanks !!!
If you messed around with more then these settings, posting #149 & #150, you're gonna have to wait till someone uploads that reg key.
Yes, I messed around with the settings ... but it does not mean I hacked her! ; ) jk. Thanks for the useful link ... sort of. Great info there, but my phone still does not ring,
Hoping for help! Anyone tweaked bluetooth volume settings only to have the ringers go silent?
ThanksS
Mikey1022 said:
If you messed around with more then these settings, posting #149 & #150, you're gonna have to wait till someone uploads that reg key.
Click to expand...
Click to collapse
Here you go:

X999+ increase Mic Volume, any tweaks?

Hi. I own a Daxian X999+ with WM6.1 and I wonder if there any tweaks to increase mic sensibility or volume as I get complains about my mic not being loud enough, I can't find any proper settings for the mic (if any) but I read about a registry tweak that unfortunately only apply to HTC
H***_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN
EARPHONE_UPLINK_VOLUME "AA"
RECEIVE_UPLINK_VOLUME "AA"
and I do not have these entries in my registry.
Any help?
how u got wm6.1 my only has tyhe 6
maniatico said:
how u got wm6.1 my only has tyhe 6
Click to expand...
Click to collapse
No, I'm sorry, need to re-assure you, my one does actually have wm6 and not wm6.1....
sounds like you may have a hardware problem as my 999+ is fine with both mic and speaker

Diamond 2 load speaker Low sound volume

Its about 2 weeks that i bought my Diamond 2 and during these days i really enjoyed it , but my only disapointment is the load speaker sound volume .The sound volume is too much low comparing to my elf for example ringtones , music and also movies. so is there any setting that i missed or its diamond 2 personality ? i already used diamond tweak to disable the 100db sound limit but nothing changed.is there any registry setting for diamond 2 to do that ?
please tell me any solution , thank you
oh sorry sorry , i just found i postet in a wrong forum . mods please delete it. again sorry

Loud headphone volume - SetAcousticParam ...

Hi,
I have a Hermes with wm6.1 with LOUD volume when i use my earphones.
( it makes me a headaches )
I searched this great forum for solutions but none that exactly pinpoint a solution.
nevertheless i found that thread on this subject:
h-t-t-p://forum.xda-developers.com/showthread.php?t=357543
what i want is to decrease my earphone volume, while the "incall" ( the volume that i hear during a call ) plus the speaker volume will remain LOUD.
how can i do that ?
how can i edit that "SJ SetAcousticParam.cab" program ? ( what values and how to embedded them ? )
Do i must reflash my hermes for that ?
P.S -
There isn't ONE thread that concentrate all the approaches on changing the VOLUME on HERMES....
Thanks in advance for any help !

Volume steps while rom building (media_vol_steps/vc_call_vol_steps)

Hi there,
I build roms for my BQ Aquaris X2 Pro. But all volume settings are to loud for me. How can I lower the volume for notification, ring tone and call volume?
TIA Micha
Hi,
I have set ro.config.vc_call_vol_steps=15 and ro.config.media_vol_steps=25 in vendor_prop.mk, but the phone only respect the media volume steps. The patch are used bei some lineage roms too, so I assume, it should work.
https://github.com/LineageOS/androi...265f2013773722e79b/product/system_prop.mk#L10
Maybe someone with Java knowledge can take a look at the source.
https://github.com/LineageOS/androi...m/android/server/audio/AudioService.java#L730
And give me a hint.
Micha

Categories

Resources