Diamond 2 load speaker Low sound volume - Touch Pro2, Tilt 2 Windows Mobile General

Its about 2 weeks that i bought my Diamond 2 and during these days i really enjoyed it , but my only disapointment is the load speaker sound volume .The sound volume is too much low comparing to my elf for example ringtones , music and also movies. so is there any setting that i missed or its diamond 2 personality ? i already used diamond tweak to disable the 100db sound limit but nothing changed.is there any registry setting for diamond 2 to do that ?
please tell me any solution , thank you

oh sorry sorry , i just found i postet in a wrong forum . mods please delete it. again sorry

Related

plz help my ringtone goes back 2 windows default by itself`

hello ppl been a while...............my xda2 has konked off. my ringtone goes back 2 windows default irrespective of how many times i change it .im using wm2k5 buzz version plz help me ...give me a permanent solution...thanx ....n also my vibrator stoped workign ne help is appreciated thx ppl
ringtone
u must check that the ringtone u wish to use is stay on your pocketpc under windows rings if not he using the default windows ringtone
this thread would have been better in the himalaya forum,

Samsung i780 - increasing ringtone - sick of it

Hi
I have been trying to remove this increasing pice of ****.
1. In sound settings in WM5 i have selected sound type NOT TO "Increasing"
2. I have tryied to apply Ringtone Scripts at HKEY_CURRENTUSER\ControlPanel\Sounds\RingTone0
Currently I am using "ac100pr". I had all combinations of these scripts. None of them work with "c" - which should set volume to 100.
It is always the same. First two quiet rings, then the rest at full volume.
How to change this?
I am really going to sell this crap if the rest of the WM5 works similarly.
Kind Regards
PK
piterfromwawa said:
Hi
I have been trying to remove this increasing pice of ****.
1. In sound settings in WM5 i have selected sound type NOT TO "Increasing"
2. I have tryied to apply Ringtone Scripts at HKEY_CURRENTUSER\ControlPanel\Sounds\RingTone0
Currently I am using "ac100pr". I had all combinations of these scripts. None of them work with "c" - which should set volume to 100.
It is always the same. First two quiet rings, then the rest at full volume.
How to change this?
I am really going to sell this crap if the rest of the WM5 works similarly.
Kind Regards
PK
Click to expand...
Click to collapse
hi
its actually wm6 ...wait some time i hear wm6.1 will be released for it in the neat future
It is WM5 not WM6.
So, you've got a samsung i780 with wM5 ?
interesting
piterfromwawa said:
It is WM5 not WM6.
Click to expand...
Click to collapse
dude , wm5 --> OS 5
5.1 and 5.2 are wm6 and above... if u have ai780 with wm5 keep it .. it will sell for more because it is an antique now !

X999+ increase Mic Volume, any tweaks?

Hi. I own a Daxian X999+ with WM6.1 and I wonder if there any tweaks to increase mic sensibility or volume as I get complains about my mic not being loud enough, I can't find any proper settings for the mic (if any) but I read about a registry tweak that unfortunately only apply to HTC
H***_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN
EARPHONE_UPLINK_VOLUME "AA"
RECEIVE_UPLINK_VOLUME "AA"
and I do not have these entries in my registry.
Any help?
how u got wm6.1 my only has tyhe 6
maniatico said:
how u got wm6.1 my only has tyhe 6
Click to expand...
Click to collapse
No, I'm sorry, need to re-assure you, my one does actually have wm6 and not wm6.1....
sounds like you may have a hardware problem as my 999+ is fine with both mic and speaker

[NEED HELP!] HD TAKES TOO LONG TO WAKE UP -many missed calls..-

Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!
I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.
Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks
I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.
Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?
Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?
it's always not a good idea to fresh new rom too often
coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?
Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..
this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know
So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624
there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!
I think is a question of time we to find solution for our problem with the phone ringing delay!
Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!
Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.
After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath
Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!
i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)

Loud headphone volume - SetAcousticParam ...

Hi,
I have a Hermes with wm6.1 with LOUD volume when i use my earphones.
( it makes me a headaches )
I searched this great forum for solutions but none that exactly pinpoint a solution.
nevertheless i found that thread on this subject:
h-t-t-p://forum.xda-developers.com/showthread.php?t=357543
what i want is to decrease my earphone volume, while the "incall" ( the volume that i hear during a call ) plus the speaker volume will remain LOUD.
how can i do that ?
how can i edit that "SJ SetAcousticParam.cab" program ? ( what values and how to embedded them ? )
Do i must reflash my hermes for that ?
P.S -
There isn't ONE thread that concentrate all the approaches on changing the VOLUME on HERMES....
Thanks in advance for any help !

Categories

Resources