Related
Hi
Has anyone got mDesktop working with the HD? I've tried the trial but mDesktop just doesn't connect. No error messages or anything.
Anyone else having these problems? Their website seems to have zero help!
Thanks in advance!
2.03 runs fine for me, on Windows 7, with HD connected. Think it requires Activesync running, which is always on on my device, during USB connections.
Thanks for your reply.
Still doesn't seem to work. When I plug my phone into my PC, it does open mDesktop automatically, it just doesn't connect.
A box does come up saying the connection has taken a long time and do I want to continue.
Any help?
Has no one else got this working?
works.. on vista.. very fine.. autoconnecting.. no probs
I'll try reinstalling then.
Is it just ment to connect without me having to do anything?
Hope it's not too far off topic, but http://www.mymobiler.com/ works fine on HD (and it's free).
http://www.dev47apps.com/
Yeah this app works great, goes over wfi and simple enough to set up. Works wonderfully with msn! Since i dont have a webcam, my i9000m can be used instead! No streaming audio atm but soon the devs say
Downloaded. Works great as a webcam replacement. No hassle installation even on Windows 7 x64.
I cant have more than 320x240
Sent from my GT-I9000 using Tapatalk
Can this app be enhanced to use the usb cable rather than wifi?
Can it be enhanced to work with other front facing camera phones?
working @ HTC Desire
can confirm that this app works on an x10 and w7 ultimate x64
skype recognized it as a webcam, still need to check the config tho
next tests
gtalk
msn
Where do I get the app for the phone ?
The title states this can be used as an HD Webcam... I tried the standard HD resolution (From Wikipedia: 720p is the shorthand name for a category of HDTV video modes having a resolution of 1280×720) but with this resolution the app FC's which it states it does if not setup correctly. The highest resolution I can goto is 480x480, going any higher on either height or width causes distortion in the picture. Anyone have any other suggestions for getting this to be HD?
ADeadlySpoon said:
The title states this can be used as an HD Webcam... I tried the standard HD resolution (From Wikipedia: 720p is the shorthand name for a category of HDTV video modes having a resolution of 1280×720) but with this resolution the app FC's which it states it does if not setup correctly. The highest resolution I can goto is 480x480, going any higher on either height or width causes distortion in the picture. Anyone have any other suggestions for getting this to be HD?
Click to expand...
Click to collapse
At least you can get it to work. I used the recommended settings, it still wants me to force close; even in 32-bit or 64-bit Windows 7, it only shows the DroidCam logo in the Skype video area.
Saturn2888 said:
At least you can get it to work. I used the recommended settings, it still wants me to force close; even in 32-bit or 64-bit Windows 7, it only shows the DroidCam logo in the Skype video area.
Click to expand...
Click to collapse
Could that be to do with the connection you're using?
ADeadlySpoon said:
Could that be to do with the connection you're using?
Click to expand...
Click to collapse
Isn't it only Wi-Fi? Should I use EasyTether and try it like that over the USB cable?
Saturn2888 said:
Isn't it only Wi-Fi? Should I use EasyTether and try it like that over the USB cable?
Click to expand...
Click to collapse
AFAIK it is only wifi, what I meant is could it be the pc isn't "seeing" the phone over the network? Or vice-versa.
ADeadlySpoon said:
AFAIK it is only wifi, what I meant is could it be the pc isn't "seeing" the phone over the network?
Click to expand...
Click to collapse
Well the phone connected, the PC says "Connected". I could only get the phone to connect once though. Once I've connected and disconnected by a force close, the program no longer connected even when I can telnet into the computer on that port. This happened to all 3 computers I tried.
Saturn2888 said:
Well the phone connected, the PC says "Connected". I could only get the phone to connect once though. Once I've connected and disconnected by a force close, the program no longer connected even when I can telnet into the computer on that port. This happened to all 3 computers I tried.
Click to expand...
Click to collapse
Hmm, that is rather weird, even after the FC's for me it still works, I just lowered the resolution. All I can think of is telling the dev about it and see if they can help or if someone else here can help. I don't know that much about the way this works really.
ADeadlySpoon said:
Hmm, that is rather weird, even after the FC's for me it still works, I just lowered the resolution. All I can think of is telling the dev about it and see if they can help or if someone else here can help. I don't know that much about the way this works really.
Click to expand...
Click to collapse
Oddly enough, I think I could try it via EasyTether and see since that /is/ an Ethernet connection meaning it will work to connect by IP.
Saturn2888 said:
Oddly enough, I think I could try it via EasyTether and see since that /is/ an Ethernet connection meaning it will work to connect by IP.
Click to expand...
Click to collapse
Ah I see, well give it a try and tell me if that works please, because I'd quite like to be able to use something like that rather than over wifi.
ADeadlySpoon said:
Ah I see, well give it a try and tell me if that works please, because I'd quite like to be able to use something like that rather than over wifi.
Click to expand...
Click to collapse
I confirmed it worked. Thanks for the idea . Well; you didn't quite give me the idea but you helped me come up with it .
Although, the same issue is happening with the transport something.
Im having an issue. After using for over 10minutes straight I get a time limit error message on my pc screen and it drops the connection and im forced to restart both apps on phone and pc. Help?
Also I cant go above recommended settings. Would this be updated in the future? especially since my phone is capable of recording 720p?
Tmo G2
Just to say it works flawlessly (thus far) on HD2 running MDJ Desire HD Build 4.0
Hi Guys,
I have a huge problem with my HTC Touch Pro 2, the display is broken but still working partly. But I can´t activate the Active Sync mode while connecting by USB cable.
So the problem is that i need the contacts, sms and calling history.
The only thing I can connect to, is the device as a hard disk so i have access to the SD card.
Is it some how possible to activate Active Sync without activiation through the display?
May be it could boot together with the device or something like that.
Actually I need the active sync connection for using the Mymobiler Software so that i could run PIMBackup and backup everything.
Or is it somehow possible to backup those things without using active sync.
Please help I really don´t know how to deal with this pitty situation...
tuch screen still works?
Before you broke display when you connect usb on display show popup with device connection options? May be better buy new display. I buy new display and tuch screen and pay for repair totall less than 50 usd.Display, touch screen.
The Touchscreen works only partly, well when i try to connect the device with USB, I see the screen where i can decide which type of connection I´d like to choose but its only partly and the part which is needed for connecting the phone by active sync is still in the part which is broken.
You don't need your screen for setting up a connection do you?
Are you really using active sync of windows mobile centrum. You could try that, it is available on windows vista / 7 if you connect your phone, and then search for an windows update, it should show windows mobile...
Can you get into the start menu, into settings and change the USB connection type to always default to ActiveSync?
Bumer645 said:
The Touchscreen works only partly, well when i try to connect the device with USB, I see the screen where i can decide which type of connection I´d like to choose but its only partly and the part which is needed for connecting the phone by active sync is still in the part which is broken.
Click to expand...
Click to collapse
Then you can try use hardware keyboard keys up/down and enter
Hey,
I have bougt a hdmi miracast dongle at eBay.
It is mediatek CPU based and only accept a micro USB connection.
Attached to this message are two pictures that show the inside and the outside.
This dongle is a zk technologies w18 dongle and beside miracast it should also support Intel widi.
Unfortunately it doesn't support... and I cannot connect my laptop to the dongle.
I can connect two different phones with 4.2.1 android, but no success with Intel widi
Any one has a device like this? Any idea where can i get a new firmware?
Thanks!
Ihave the same device and same question? Are there any solutions to hacking this device?
asvil said:
Ihave the same device and same question? Are there any solutions to hacking this device?
Click to expand...
Click to collapse
Hey!
I can connect using an android phone, but i'm unable to connect to it using intel WIDI...
I've have contacted ZK Technologies and they did reply with this:
Hello，
So Sorry, W18 currently does not support INTEL WIDI.
Thanks,
Click to expand...
Click to collapse
After another quote:
Will it ever support it?
I bought it from ebay and they had in the description:
• WiDi technology V3.5 laptop
Thanks a lot,
Click to expand...
Click to collapse
They reply:
Dear Sir,
Yes, it'll support widi after two months via hardware update, now is not supported.
Any other question pls do not hesitate to contact us,tks!
Click to expand...
Click to collapse
But after a few tries i've managed to connect my laptop to the device, but it just worked one time... and i have no idea how did i manage to do that... and i could never ever again got it connected...
So i will have to wait for a while and see what is their "hardware" upgrade...
Really fast answer))
So, it is interesting that they provide update functionality. Could you please ask them about it? Is it possible to update existing device on home PC?
Fric said:
Hey!
I can connect using an android phone, but i'm unable to connect to it using intel WIDI...
I've have contacted ZK Technologies and they did reply with this:
After another quote:
They reply:
But after a few tries i've managed to connect my laptop to the device, but it just worked one time... and i have no idea how did i manage to do that... and i could never ever again got it connected...
So i will have to wait for a while and see what is their "hardware" upgrade...
Click to expand...
Click to collapse
asvil said:
Really fast answer))
So, it is interesting that they provide update functionality. Could you please ask them about it? Is it possible to update existing device on home PC?
Click to expand...
Click to collapse
Send them an email:
[email protected]
And post here you inquire and their answer.
Thanks for contact. I will also ask them about wifi access point functionality.
Fric said:
Send them an email:
[email protected]
And post here you inquire and their answer.
Click to expand...
Click to collapse
asvil said:
Thanks for contact. I will also ask them about wifi access point functionality.
Click to expand...
Click to collapse
Access Point Functionality? What is that?
Fric said:
Access Point Functionality? What is that?
Click to expand...
Click to collapse
Sorry I was wrong. I want to connect my macbook to device, so I have to establish computer-to-computer connection. The right words should be, "supporting computer-to-computer wifi connection".
My questions:
I just bought device hdmi dongle (w18) and try to find way for connecting my macbook.
Could you please tell is it possible? Should I update firmware for that, and can I do it at home PC for existing device?
Does device support wifi access point mode, because I found that mac os x have no wifi direct?
Click to expand...
Click to collapse
Theirs answers:
hello，
Sorry about that W18 does not currently support macbook.Our R & D team will try to do it.
If our products support this feature, we will notice it.
Thank you for purchasing our products.
Click to expand...
Click to collapse
I have a device that internally looks the same, although I do not know who produced it, but where your's say MT-WFD18, mine says RLM218_1.1, and just below W-SL + 2813.
I haven't tried anything else than just miracast, which worked not so well, was fairly slow screen update, with sound out of sync while using Dice Player on my LG G2.
When i read det description from the seller it mentions something about 'intuitive interface', from what I can see, it is just a bootlogo static screen, is there a standard way of communicating with these devices, like common SW that do something, or is it likely the intuitive interface is just that, static screen?
Did anyone find any hacks/fw updates for these?
[EDIT] Added pictures, sorry about the quality, lazy and just used mobile phone, and it seem i amanged to get part of my beard in with it! :/
I have what seems to be a re-branded ZK W18(Allview Smart2View). Worked reasonably well with my phone for a while(some stuttering was present, the occasional disconnect) but I was quite happy with it as my phone has no tv-out. Used it maybe about 5 times. Today I was trying to show somebody some videos I took from one of my kids training and discovered it has no sound. Got sound after a reboot, but it disconnected after half a minute and sound didn't come back since. I am also interested in an update to make it more stable...
Miracast smart2view dongle
Hi,
I purchassed one of thode too.
The original is made in china:
ZK-W18 Miracast dongle.
Playback is a little choppy.
Any ideas to improve playback?
N
andrei80 said:
I have what seems to be a re-branded ZK W18(Allview Smart2View). Worked reasonably well with my phone for a while(some stuttering was present, the occasional disconnect) but I was quite happy with it as my phone has no tv-out. Used it maybe about 5 times. Today I was trying to show somebody some videos I took from one of my kids training and discovered it has no sound. Got sound after a reboot, but it disconnected after half a minute and sound didn't come back since. I am also interested in an update to make it more stable...
Click to expand...
Click to collapse
1. better hardware(impossible...)
2. better firmware(almost as impossible, it seems)
Yups... i still haven't found a new firmware
I have this device too (allview branded). Worked for a while, then sound dissappeared, then it kept restarting, then just gives black screen. I suspect it's overheating, and maybe it is damaged because of that. Not recomended...
found this in a chinese file sharing website.
I searched with the terms mt8636 and rlm218 and found this:
https://ufile.io/gah08
I don't know if something can be done with that but maybe someone can see what it is.
Hi, I just installed MyMobiler on both the HTC One M8 and on my PC.
I can connect both via USB and via IP, but in neither case do I get to see my screen on my computer.
I have tried all 4 display options.
What does work: if I click the home icon on my PC, the phone switches to the home screen. Back and menu button don't seem to work.
I can use my PC keyboard.
Has anyone managed to get the phone display to work with the HTC One M8?
Thanks
at the beggining it is hard but then you are going to get used to it
philbertz said:
Hi, I just installed MyMobiler on both the HTC One M8 and on my PC.
I can connect both via USB and via IP, but in neither case do I get to see my screen on my computer.
I have tried all 4 display options.
What does work: if I click the home icon on my PC, the phone switches to the home screen. Back and menu button don't seem to work.
I can use my PC keyboard.
Has anyone managed to get the phone display to work with the HTC One M8?
Thanks
Click to expand...
Click to collapse
If you have figured this out, I would love to know. I cannot get my PC to connect to the phone through USB or WiFi. EDIT: Gave up. Used a Google Chrome extension called VYSOR that works almost as good as MyMobiler
Well, I have it ALMOST figured out. I can now run the software on my desktop and my mobile device. I do get "a" screen appearing on my desktop. Unfortunately, it is just a black screen and NOT what is actually shown on the mobile device. I can type text onto the desktop image of the black screen. That text does show up on the mobile device if I am in a text msg input mode, for example. But, the mobile device image is not transferring to the desktop. Where is the help I need???
EDIT: Problem solved. Using VYSOR, a Google Chrome extension instead. Works almost identically to MyMobiler