Hi,
after long consideration I deared to upgrade the ROM of my WM PDA, Qtek 9090 (o HTC Blue Angel) and Vodafone 1605 (TyTn o Hermes)
After few tests, all positive(now my 9090 is performing very good with WM 6.5.5 build 23529) the TyTn, after satisfactory performances with few versions of the WM 6.5 (including Satin) was damned by a new test with DarkWinter-full2g.
Probably the ROM file was corrupted and while flashing, it stopped and now I only have the nice wither picture (replacing the origina red bottom with the Vodafone logo) with the following data.
M 05 R 1.56.78.11
S 04 G 32.89.7020.20H
R 06 D 3.57
After few seconds the screen become full white and it remain that way while a "ding" sound announce the the booting process stopped.
Launching the boot loader, the scrren become, as due, multicolor and the follwing appears
HERM200
IPL-1.01
HERM200
SPL-2.03
but when trying to flash a new ROM, once the advance bar reach 1% everithing stops, the screen become black anf in few second the boot process starts with the Winther view and then again the stop with the full white screen.
I tried several way, several tool but it seems none of them is the right one. Is there a way? Who can make me revitalize my TyTn?
Thanks for the suopport
FABbar09
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
here:
http://forum.xda-developers.com/showthread.php?t=610218&highlight=unbrick
or here:
http://forum.xda-developers.com/showthread.php?t=355884&highlight=unbrick
Hope it helps
Damn buddy... you didnt unlock your device... you almost bricked it!!!
Launching the boot loader, the scrren become, as due, multicolor and the follwing appears
HERM200
IPL-1.01
HERM200
SPL-2.03
Click to expand...
Click to collapse
PPL!!!!! PLEASE first first first unlock your device by applying HSPL v7
Related
I just installed the new Universal Upgrade v1.30.68 radio 1.09.0 in my NEW Jasjar and installed ozVGA but it hungs at the start and wont continue from the logo screen... I realy realy realy wanna use real VGA with my device... I hard reset my device and I tried all deferent versions from the FTP (I downloaded it some times ago) and from version 053 from http://oz.sciox.org/ but it's all the same... maybe some files is deferrent with this new os.... Please help
I have same version of OZVGA installed, and latest I-Mate ROM installed on my QTEK 9000 and have NO PROBLEMS switching between modes except the normal misaligned bars, fonts and the battery indicator is always on the exclamation point status.
same for me.
with the QTEK 9000 ROM 1.13.73 and the Radio ROM 1.09.00
OzVGA hungs at the logo screen.
Hi, when i upgrade my spv m700 from wm5 to wm6 It stock and i repair them but on my pulpit i see now white screen and camera button,contacts buton, start and time. I changed ROM a lot of time but white screen is there.
can you explain exactly what steps you did to upgrade?
do you have hard spl? which version?
if you're using olipro's hard spl, switch to des' crash-proof spl.. you can find links and a guide on my site...
Luzik2oo6 said:
Hi, when i upgrade my spv m700 from wm5 to wm6 It stock and i repair them but on my pulpit i see now white screen and camera button,contacts buton, start and time. I changed ROM a lot of time but white screen is there.
Click to expand...
Click to collapse
Did you check this?:
http://forum.xda-developers.com/showthread.php?t=311180&highlight=white+screen
THX for everybody now its okey. You are smart
hi!
I'am a N00b of ppc (lol) ... but i'am looking for a wm 6.1 rom for the jama 101 ...
thanks
ps= sorry for my bad english
me too
me too need wm6.1 or higher for my i-mate jama101
The original rom is not even out yet. So any roms u will find wont be original and most propably cooked from other roms such as the i mate jama. I found one and when i installed it my phone went blank, nothing on the phone, only a white screen, and till now it cant be fixed. Dont try to look for any roms because the one u have is the best.
WARNING
100% I agree with you mr. Galiza 2days ago I bought a JAMA 101 and tried to update the virgin rom but 4 sorrow my GAMA 101 is dead right now because that updating and only white screen what I got from the ROM 6.1 I advice all who have a JAMA 101 to keep the virgin ROM and never try to update it. cuz you ll never back 2 the vigin again and you ll kill you device .
mr.Galiza if there any way to back my GAMA 101 2life plz tell me
thanx to all
sorry sir
I'm late and now my i-mate JAMA101 stuck in white screen
how can I fix this problem????thanx
imate jama 101 white screen
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
niflas said:
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
Click to expand...
Click to collapse
i need rom i have one phone only sho i mat
no rom is available for this poor device !
I search the net for hours and ... nothing !
I think we must Dump rom from our device and then cook it !
i-mate jama 101 rom problems
hey guys, i gues microsoft built in system in most of the pocked pc are uncorruptable. i am not sure if the builtin system of your pocket pc is corrupted or not. Here are some steps to update your device to the company built operating system.(note-system works only if builtin system is not corrupted)
1-remove battery
(note-betry should be charged,use master charger to charge if your pocked pc is not charging battery)
2-press and hold volume(-) button and red hangup button simultaneously,keep holding both keys and insert the battery.(note-dont unhold keys until the red led light on the top of the device is off)
3-tap decline on agreement statement(note-accept=arabic language instalment, decline=english language instalment)
After following these steps your pocket pc will as it was. for other manual instructions mail me to [email protected] .
sincerely k231.
I'm up rom Tmobile dash 6.1, but error 294.
I'm want find ROM WM 6.0 standard old of Tmobile dash _china
Screen:
ONBL 1.33.0000
SPL 1.33.0000
Please, help me!!!!
Thanks!
Bien_irt said:
Im up rom Tmobile dash 6.1, but error 294.
Im want find ROM WM 6.0 standard old of Tmobile dash _china
Screen:
ONBL 1.33.0000
SPL 1.33.0000
Please, help me!!!!
Thanks!
Click to expand...
Click to collapse
Welcome to the forum
May I ask why that ROM having here great 6.1´s?
I recommend you to read the Wiki
My phone is T-mobile dash (China).
Before upgrading my rom speeds up in the chip 264, in the process of upgrading rom (version v1.7 rose) and then failed to appear as follows:
- Upgrade process is running, the sudden end, and then restart when the logo appears only HTC and always turn off the source.
- I manually reset (hold 2 keys) appears reset the notification requirements click Send, I have made but only HTC logo appears as before.
- I use the USB key and keep the color photographic images appear 3 scratch and color parameters as follows:
+ Excalibur ONBL 1.33.0000
+ Excalibur SPL 1.33.0000
+ Excalibur IU
and a small scratch with white text below the USB screen
I was trying to find the original ROM of your device without.
Who can help me how do solve this problem is not?
Thank you very much!
Just as orb3000 said check the link below...
http://forum.xda-developers.com/showthread.php?t=397583
Thank orb3000 and johnambler41577 !
I have read and check the wike but all original ROM still not compatible with my phone. Too sad!
Need ideas help of experts!
Hello every body,
My mobile screen turns black after showing the windows 6.1 logo. I have installed HardSPL 1.4 OilNex and also updates rom many times but I cant figureout what happen this time . Can any body help me please.....
Deatails of ROM
DIAM30000
O2___102
2.03.207.2
DEU
64
Information coming on screen
R 1.09.25.23
G 52.51.25.26U
D 5.12.00.00
have you tried formatting using the MTTY guide ?
Maybe that will solve your problem.
Sounds like "dirty bits" in there!
Good luck