hi!
I'am a N00b of ppc (lol) ... but i'am looking for a wm 6.1 rom for the jama 101 ...
thanks
ps= sorry for my bad english
me too
me too need wm6.1 or higher for my i-mate jama101
The original rom is not even out yet. So any roms u will find wont be original and most propably cooked from other roms such as the i mate jama. I found one and when i installed it my phone went blank, nothing on the phone, only a white screen, and till now it cant be fixed. Dont try to look for any roms because the one u have is the best.
WARNING
100% I agree with you mr. Galiza 2days ago I bought a JAMA 101 and tried to update the virgin rom but 4 sorrow my GAMA 101 is dead right now because that updating and only white screen what I got from the ROM 6.1 I advice all who have a JAMA 101 to keep the virgin ROM and never try to update it. cuz you ll never back 2 the vigin again and you ll kill you device .
mr.Galiza if there any way to back my GAMA 101 2life plz tell me
thanx to all
sorry sir
I'm late and now my i-mate JAMA101 stuck in white screen
how can I fix this problem????thanx
imate jama 101 white screen
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
niflas said:
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
Click to expand...
Click to collapse
i need rom i have one phone only sho i mat
no rom is available for this poor device !
I search the net for hours and ... nothing !
I think we must Dump rom from our device and then cook it !
i-mate jama 101 rom problems
hey guys, i gues microsoft built in system in most of the pocked pc are uncorruptable. i am not sure if the builtin system of your pocket pc is corrupted or not. Here are some steps to update your device to the company built operating system.(note-system works only if builtin system is not corrupted)
1-remove battery
(note-betry should be charged,use master charger to charge if your pocked pc is not charging battery)
2-press and hold volume(-) button and red hangup button simultaneously,keep holding both keys and insert the battery.(note-dont unhold keys until the red led light on the top of the device is off)
3-tap decline on agreement statement(note-accept=arabic language instalment, decline=english language instalment)
After following these steps your pocket pc will as it was. for other manual instructions mail me to [email protected] .
sincerely k231.
Related
WWE rom (world wide english, I believe)
ftp://ftp.clubimate.com/JASJAR_WWE_13076_164_10900_wwe_ship.zip
italian rom
ftp://ftp.clubimate.com/JASJAR_ITA_13081_169_10900_ita_ship.zip
'ME' means what? (middle east?)
ftp://ftp.clubimate.com/JASJAR_ME_13082_171_10900_wwe_ship.zip
'SA' means what? (south africa?)
ftp://ftp.clubimate.com/JASJAR_SA_13082_170_10900_wwe_ship.zip
FYI, downloads VERY, but VERY SLOW!!! has somebody upload it into the xda-developers FTP server?
Hi,
Are these the official release or another test?
I hate to switch to the I-mate ROM if these are just the test ROMs. Thanks for posting.
ship on the end suggests its final, as the older jasjar roms are no longer on the ftp
Is there any change that this ROM suport A2DP ?
moghisi101 is downloading the WWE version, he suggested waiting for him to upload it here as the IMATE ftp is slow enoguh without all of us trying to download it at the same time. I can't wait to test it!
wrong forum, to early in the morning, sorry...
interesting, downloading now. bugger, i just did the beta rom earlier this week, now i have to do it all again.
i wonder what the final differences were between beta and final...
is this the final version.........without test etc. like the first released version?
What a great news!!!
Hope it include A2DP.
Cheers,
Upgrade in progress !
Done, the Push is here, but not the BT stuff, worked well, will soon cook the Ex Rom. Also the Radio 1.09.00 is there no need to "cook" the installation, now how can we remove this Battery icon for the clock ?
Cheers
Get off the ftp and go to this link to get the http: much faster download. I'm getting 128 kb so about 7 minutes total download time.
http://www.clubimate.com/support/JASJAR/ROM/JASJAR_WWE_13076_164_10900_wwe_ship.zip
The Italian version on the ftp site gives 'country id error' with my original Italian jasjar, so it is not ready or not Italian.
just flashed the new ROM and made a hard reset ... the device is totally dead!!! .... the hard reset menu is active, but nothing happens after pressing zero ... any ideas ??? :evil: :evil: :evil: :evil:
Biso007 said:
just flashed the new ROM and made a hard reset ... the device is totally dead!!! .... the hard reset menu is active, but nothing happens after pressing zero ... any ideas ??? :evil: :evil: :evil: :evil:
Click to expand...
Click to collapse
Try to remove the SD and the Sim cards and repeat the update.
My device went dead yesterday when i tryed to flash the new rom, tryed every thing ... nothing
But this morning i manage to put it in bootloader mode, and flash it again and it went ok, is now working with the new rom.
Anyone figured out yet if these ROMs are official?
Is the SA one for South Africa?
VIPPER2004 said:
My device went dead yesterday when i tryed to flash the new rom, tryed every thing ... nothing
But this morning i manage to put it in bootloader mode, and flash it again and it went ok, is now working with the new rom.
Click to expand...
Click to collapse
Hi ... how did you manage to get to the bootloader mode ? ... I have a blank black screen and the PC doesn't recignize the device at all
i really dont understand all these issues that people have re-flashing, mine went perfectly with the beta and the "ship" release.
which by the way still isnt actually on the site yet, so dont know what they are playing at.
seemed to work fine for me, and the Fn -> works now...
I would have thought imate to imate shouldnt cause any problems whatsoever and should work really smoothly, but i noted that some with the issue were imate upgraders, so tell me, what did you do or not do?
Can someone list what is new in this ROM???
THanks very much.
Cheers,
nothing but the usual ... conncted the device and ran the upgrade file ... finsihed smoothly ... made a hard reset and here I am with a blank black screen .. BTW, the hard reset menu doesn't show up either :evil: :evil: :evil:
EDIT 17 Nov 2007
Thanks to Jiggs, ViVi, Ervius, and anyone that help me out !!
Version 17 Nov 2007
Final Version for OS 5.2.1933
- Fixed All Bugs
http://www.uploading.com/files/U8RXQU3P/P51_neogin_17NOV2007_FINAL.rar.html
http://rapidshare.com/files/70269084/P51_neogin_17NOV2007_FINAL.rar.html
Benq P51 TouchFlo Touch IT
I just almost seen your video about p51 with TouchFlo, this is include in this new version?
Tha last previous version (wm6) have a liltte bugs when you plug the cable to charge, (not responding the screen or any button) in this rom is this solved?
Thank you for your efford and your time!!!!
I have already installed and works very fine!
You has done a very excellent work.
GREAT,neogin.
vivi
Hey Neogin. is the touchflo fully working? i remember using any of the touchflo on any p51 rom will freeze the device when u put it on standby? anyway im downloading it now to try it out. hopefully it works now..
Cutefox said:
Hey Neogin. is the touchflo fully working? i remember using any of the touchflo on any p51 rom will freeze the device when u put it on standby? anyway im downloading it now to try it out. hopefully it works now..
Click to expand...
Click to collapse
good news ..
no freeze !!
Just a few bugs... (not a big deal)
1. When a call or a message arrived...the led dont blinking red...
2. The bar of battery on the upside is always full even if the battery is empty...
I will continue testin'...
Again...Excellent Work!
did u use the new one ?
i just uploaded it today ..
yep .. previous version has bugs ..
you shouldn't see the battery icon .. i remove to clock instead !!
hi neogin, just flash it. it actually hanged when u put the device on standby. wait a few minutes after u switch it off so that S2U wont wake the device up when u press any button, and press the power button to wake it up. mine wont wake up at all.
yeah i just found out about that too ..
the problem comes from FTouchFlo ..
don't use it .. you can remap the left button with any programs ..
yea so i guess its a touchflo thing and not ur rom since it was like that with all your other rom.. its a shame since u almost got everything working.. good work so far thou!!
i have to admit that .. most of the previous rom .. i stole it from here and rework them all .. were not the perfect clean rom ..
only the clean rom .. i prefer that ..
but u see !!
most of the clean rom that i thought that they were CLEAN ..
not clean .. so, most of the rom here i can say that they are not clean ..
got bugs .. more like .. one part is new .. and add up to their rom and say that
this is newest OS .. blah blah ..
these bugs are hard to catch .. very hard ..
i spent my time reading all registry over and over .. study them ..
still can't fix it .. i'm still a noob .. so sad ..
but some roms are really clean .. i like those clean rom too .. just like u ..
easy for me to rework .. Bepe always give us clean one ..
i hope there are people like him in our society .. it's nice to live with ..
Version 17 Nov 2007
Final Version for OS 5.2.1933
- Fixed All Bugs
http://www.uploading.com/files/U8RXQU3P/P51_neogin_17NOV2007_FINAL.rar.html
http://rapidshare.com/files/70269084/P51_neogin_17NOV2007_FINAL.rar.html
In this last version i cannot install the last update for 2sus. (S2U2-0.85-WM5)
It gives me this message:
Installation was unsuccesful. The program or setting cannot be installed because it does not have sufficient system permissions.
Could you install this in this last rom? THnxs!!!
neogin what's up man? Where are you?
Help us with the installation of the last s2u2 in this last rom.
I must be doing something wrong because I cannot install this. I followed the directions but all the phone ever says is "USB Connected". Any thoughts?
I'm running Vista btw.
lakers8833 the procedure only works in WinXP...
Ok got it to work. Thanks farfanet!
hi. i update the rom yesterday to my p51 but a got some issues.
-the red tray icon on the right botom to turn on/off wlan suddenly disapair, cant enable it.
-when i use stereo bluetoot A2DP (HBH-DS220 & HBH-DS970 sonyericsson) in media player it bleep for 5-8 seconds and skips to the next song after 15-25 segs.
Neogin could you fix it please i use to hear my music whit this sweeties .
one more thing where i can get the Radio Rom 1.09 ???
Neogin,
great work on the remarkable improvements.
I am also wondering where the 1.09 radio ROM is.
thanks in advance!
george
Hi, when i upgrade my spv m700 from wm5 to wm6 It stock and i repair them but on my pulpit i see now white screen and camera button,contacts buton, start and time. I changed ROM a lot of time but white screen is there.
can you explain exactly what steps you did to upgrade?
do you have hard spl? which version?
if you're using olipro's hard spl, switch to des' crash-proof spl.. you can find links and a guide on my site...
Luzik2oo6 said:
Hi, when i upgrade my spv m700 from wm5 to wm6 It stock and i repair them but on my pulpit i see now white screen and camera button,contacts buton, start and time. I changed ROM a lot of time but white screen is there.
Click to expand...
Click to collapse
Did you check this?:
http://forum.xda-developers.com/showthread.php?t=311180&highlight=white+screen
THX for everybody now its okey. You are smart
Hi,
Il from Belgium. SORRY FOR MY BAD ENGLISH
I have a Qtek S100
R 1.01.00
G 133.38
D 1.03.02 FRE ( French i think )
I tryd to change my Extended Rom from French to Dutch or English... with some file i dont know... im new it this stuff and i F**kt it up!!!
My Qtek just goene black and on the screen u can see USB 1.0.0
After open the baterycover and plug in back the qtek starts BUT after starting install the original app. it goes back to thr BLACK screen and nothing happens.
If I plug in the USB and connect it with my pc, it comes on the screen USB 1.0.0 ....
SO PLA HELP ME PLS!!!
I tryd hard / soft reset, NOTHING!
I look at XDA alredy 4 days everyday 4-6 hours I tryd SO MUCH, I take a day off work, so to can fix it!
IM GOIN CRAZY PEOPLE!!! PLS PLS HELP ME!
Hello every body,
My mobile screen turns black after showing the windows 6.1 logo. I have installed HardSPL 1.4 OilNex and also updates rom many times but I cant figureout what happen this time . Can any body help me please.....
Deatails of ROM
DIAM30000
O2___102
2.03.207.2
DEU
64
Information coming on screen
R 1.09.25.23
G 52.51.25.26U
D 5.12.00.00
have you tried formatting using the MTTY guide ?
Maybe that will solve your problem.
Sounds like "dirty bits" in there!
Good luck