Hi, when i upgrade my spv m700 from wm5 to wm6 It stock and i repair them but on my pulpit i see now white screen and camera button,contacts buton, start and time. I changed ROM a lot of time but white screen is there.
can you explain exactly what steps you did to upgrade?
do you have hard spl? which version?
if you're using olipro's hard spl, switch to des' crash-proof spl.. you can find links and a guide on my site...
Luzik2oo6 said:
Hi, when i upgrade my spv m700 from wm5 to wm6 It stock and i repair them but on my pulpit i see now white screen and camera button,contacts buton, start and time. I changed ROM a lot of time but white screen is there.
Click to expand...
Click to collapse
Did you check this?:
http://forum.xda-developers.com/showthread.php?t=311180&highlight=white+screen
THX for everybody now its okey. You are smart
Related
how can i change the full rom of my spv m5000.
are there any custom installers for this.
i dont like the splash screen and the side bar..
please reply. thanks
SPV
If its just the "Orange Branding"and the silly today page you dont like, your using a sledgehammer to crack a walnut. Hard reset your M5000, and when you have gone thru the setting up of the screen etc, and you see the message "Cusomising Your Device in 5 Seconds", do a soft reset before this times out. This will stop the orange customisation cabs being installed. Bingo. 1 SPV with a basic WM2005 opperating system
done, but ive installed the qtel 9000!!! wanna know how reply.......
i want DopoD M700 update
Try B&B4.3, u will impress with this rom.
Anyone know where I can get the Dopod M700 CHT Rom beside from DopodAsia? Thanks!
Does B&B4.3 for artemis / P800 ? the buttons are different..
M700 got different buttons alocation. No GPS.
I'm looking for WM6.1 Vanilla specific for Dopod M700 only
-
I'm using Dopod M700 too.
You can use Black & Blue 4.3 or 5.0 (but 4.3 is better) or the best one is Artemis Touch 4.01 (or maybe 4.02 better, I'm testing 4.02).
All of them work good with GPS
Those ROM is for Artemis & Dopod M700 is Love, so you have to change the button setting, it is so easy.
Ok, I found the Dopod P800W CHT Rom from somewhere and flashed my Dopod M700 by editing the hex file to match the Model ID. However, after flashing the Dopod P800W CHT Rom, my Dopod doesn't show EDGE connection but just GPRS. I'm sure that it was EDGE connection with my previous ROM. Anyone know how to get back to EDGE connection? My previous ROM and current ROM are:
Previous ROM:
LOVE 1.3 WEN WWE
Rom Date: 16/11/07
Radio Ver: 03.07.90
Protocol Ver: 4.1.13.51
Current ROM: (File Name: P800w_TW_CHT_WM6_Upgrade_20070713)
3.7.709.1 CHT
Rom Date: 21/6/07
Radio Ver: 2.67.90
Protocol Ver: 4.1.13.51
Ext_Rom Ver: 3.6.709.101
Even I flashed the radio Rom to 03.07.90 or 03.12.90, the connection still at GPRS status. Even the Model of P800W and M700 are EDGE unabled in Taiwan. Therefore, I don't know why the EDGE doesn't appear on my connection.
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Pardoon said:
thanks a lot for sharing but my M700 was hang after i hard reset and it stop at the main startup
IPL 1.28.0001
SPL 1.28.0000
GSM 02.69.90
OS 1.28.0.0
Anty solution for dat ????????
thanks in advance
Click to expand...
Click to collapse
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
lamjeff said:
Hi ... Did u fix your m700 ... i have flash this rom and right now i encounter the same issue here..
I try to copy the rom in the micro sd and try to boot up " press " recorder and reset " from SD to write back the rom ... but still not work.... hang in another screen have red,green and blue color ...help help..
Click to expand...
Click to collapse
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
tan880121 said:
You need to update the SPL to 1.11.0000 in order to flash/update your Dopod M700. you need to go to service mode and using usb cable to update it.
Click to expand...
Click to collapse
i have already update the spl to 1.11... btw, can u let me know how to go to serivce mode ..... coz right now i try to use usb cable to connect the pc... no response.... help help
y_bother said:
if you brick your device you have to copy the original ROM into your SD.. and format your SD with FAT system file.. and then if you press the record botton and the reset and don't work.. try to press the record and the power while your mobile is off.
Click to expand...
Click to collapse
Thanks for your information... I have work on this machine over 10 hrs to search over the forum here.... at last i can flash it when i press record and reset button and at the same time connect with usb cable ...... after that i can flash it thru PC ...........
tks...
hi!
I'am a N00b of ppc (lol) ... but i'am looking for a wm 6.1 rom for the jama 101 ...
thanks
ps= sorry for my bad english
me too
me too need wm6.1 or higher for my i-mate jama101
The original rom is not even out yet. So any roms u will find wont be original and most propably cooked from other roms such as the i mate jama. I found one and when i installed it my phone went blank, nothing on the phone, only a white screen, and till now it cant be fixed. Dont try to look for any roms because the one u have is the best.
WARNING
100% I agree with you mr. Galiza 2days ago I bought a JAMA 101 and tried to update the virgin rom but 4 sorrow my GAMA 101 is dead right now because that updating and only white screen what I got from the ROM 6.1 I advice all who have a JAMA 101 to keep the virgin ROM and never try to update it. cuz you ll never back 2 the vigin again and you ll kill you device .
mr.Galiza if there any way to back my GAMA 101 2life plz tell me
thanx to all
sorry sir
I'm late and now my i-mate JAMA101 stuck in white screen
how can I fix this problem????thanx
imate jama 101 white screen
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
niflas said:
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
Click to expand...
Click to collapse
i need rom i have one phone only sho i mat
no rom is available for this poor device !
I search the net for hours and ... nothing !
I think we must Dump rom from our device and then cook it !
i-mate jama 101 rom problems
hey guys, i gues microsoft built in system in most of the pocked pc are uncorruptable. i am not sure if the builtin system of your pocket pc is corrupted or not. Here are some steps to update your device to the company built operating system.(note-system works only if builtin system is not corrupted)
1-remove battery
(note-betry should be charged,use master charger to charge if your pocked pc is not charging battery)
2-press and hold volume(-) button and red hangup button simultaneously,keep holding both keys and insert the battery.(note-dont unhold keys until the red led light on the top of the device is off)
3-tap decline on agreement statement(note-accept=arabic language instalment, decline=english language instalment)
After following these steps your pocket pc will as it was. for other manual instructions mail me to [email protected] .
sincerely k231.
Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Dragon-Fly said:
Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Click to expand...
Click to collapse
Ok....you have a big problem..
I've read that if you have a fading screen,you might have your motherboard faulty.
So grab a phone and run to HTC repair center while you still have warranty.
cheers....
Z
Hmm, but all other fuctions on my phone are working correct. I may have given the inpression that is happens all the time but it ain't. Sometimes such as after a call, my screen turns black and if i hit the reset button the screen lights up an than it fades out. That made me believe that is is a software problem, so a newer version of WM may be a solution, or not?
Thanks but, does someone has an idea, or anser to my questions?
It seems hardware related, though if u want to flash another rom, u can check the USPL thread on Artemis upgrading section, then flash the rom u want.
Good luck.
Hi,
after long consideration I deared to upgrade the ROM of my WM PDA, Qtek 9090 (o HTC Blue Angel) and Vodafone 1605 (TyTn o Hermes)
After few tests, all positive(now my 9090 is performing very good with WM 6.5.5 build 23529) the TyTn, after satisfactory performances with few versions of the WM 6.5 (including Satin) was damned by a new test with DarkWinter-full2g.
Probably the ROM file was corrupted and while flashing, it stopped and now I only have the nice wither picture (replacing the origina red bottom with the Vodafone logo) with the following data.
M 05 R 1.56.78.11
S 04 G 32.89.7020.20H
R 06 D 3.57
After few seconds the screen become full white and it remain that way while a "ding" sound announce the the booting process stopped.
Launching the boot loader, the scrren become, as due, multicolor and the follwing appears
HERM200
IPL-1.01
HERM200
SPL-2.03
but when trying to flash a new ROM, once the advance bar reach 1% everithing stops, the screen become black anf in few second the boot process starts with the Winther view and then again the stop with the full white screen.
I tried several way, several tool but it seems none of them is the right one. Is there a way? Who can make me revitalize my TyTn?
Thanks for the suopport
FABbar09
Have a look here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
here:
http://forum.xda-developers.com/showthread.php?t=610218&highlight=unbrick
or here:
http://forum.xda-developers.com/showthread.php?t=355884&highlight=unbrick
Hope it helps
Damn buddy... you didnt unlock your device... you almost bricked it!!!
Launching the boot loader, the scrren become, as due, multicolor and the follwing appears
HERM200
IPL-1.01
HERM200
SPL-2.03
Click to expand...
Click to collapse
PPL!!!!! PLEASE first first first unlock your device by applying HSPL v7