Please help me,
I was success update ROM but after reebot just show white screen.
i have same problem. at the same time, ActiveSync can't connect to touch pro2.
ahhhh
mine just did this too! help. just site on white screen with the BRPD information at the bottom
Hey guys, just a quick note, I had this screen too, I went to the HTC Mobile Product support webpage, and, when I put the HT2 into bootloader screen (power on while holding the down volume), I was able to install the original ROM that ships with the phone, and its working again.
On the HTC Mobile product support page, you can click more info for exact instructions on how to install this ROM.
Good luck. I was scared ****less that I had messed my phone!
Related
Hello,
I've just installed HardSPL succesfully, after that I wanted to install MightyRom 4.6, so I did. That went succesfully too according to my computer. Now when i want to switch the phone on, it keeps hanging with the T-Mobile picture on it. I've done a hard reset for several times and also a few soft resets. I also took my battery out for a few minutes, but when I switch it on, the same thing happens.
Please help me out of this !
Ps. sorry for my bad english !
for taking a little stress from your brain take an other rom - orig. rom from your provider.....
(go bootloder from pda; if your orig. rom only one *.exe-file you have to extract (winzip/winrar) it before flashing; connect usb (bootloader screen change from serial to usb); than flash)
but before you do this, how long you have to wait and look to your screen?
it can be sometimes a very long time until a windows-screen is coming.
if your pda gets hot than dont wait and flash asap new rom.
after 5 minutes waiting without any changes you have to flash an other rom.
I think I may have the same problem with my Diamond. I also installed MightyRom 4.6. Now, when I power up my phone, I get through the RGB stage to a white backdrop with instructions in blue to push volume button up for a reboot to manufacturers settings or push volume button down to reboot to manufacturers settings and wipe the movinand....after I select either one, when it gets to the HTC logo (HTC Diamond in white on a black background), it freezes. My pc won't recognise my phone when I plug it in...
Do I now have a really gorgeous paperweight or can I hold my Diamond to my ear again? Insight into my problem would be much appreciated.
By the way, XDA Dev rocks. Thanks to all who made this site possible.
Brick or no brick ?
Oh, I forgot to mention that my phone was a non-branded HTC running a Duttys rom. I did not want to get a DOPOD Diamond from China Mobile as they cost more and I dunno if they put Big Brother software in there.
HateMan01 said:
I think I may have the same problem with my Diamond. I also installed MightyRom 4.6. Now, when I power up my phone, I get through the RGB stage and then when it gets to the HTC logo, it freezes. My pc won't recognise my phone when I plug it in...
Do I now have a really gorgeous paperweight or can I hold my Diamond to my ear again? Insight into my problem would be much appreciated.
By the way, XDA Dev rocks. Thanks to all who made this site possible.
Click to expand...
Click to collapse
hi try and do like okokur has posted
cobbs said:
hi try and do like okokur has posted
Click to expand...
Click to collapse
My pc won't recognise my phone when I plug it in...
HateMan01 said:
My pc won't recognise my phone when I plug it in...
Click to expand...
Click to collapse
do you have it in the boot loader before you plug it in to your pc?
Brickety brick, brick, brick...
My phone does not recognize my pc and vice versa. I tried plugging the phone in before booting it up. I tried while booting up. I tried at the white screen stage...nothing...help...
It also doesn't stay at the RGB screen for long...maybe 2 seconds...
Please break it to me gently if I have killed my HTC...I don't want to start drinking again...
...
My phone is a GSM Diamond. MightyRom 4.6 is for CDMA. If I combine the two(like I did) then am I screwed?
Can someone please give me some insight, please? I have been scouring the net for 3 days non stop now and my eyes are going to explode...
What is Jtag and can your average home user use it? Is it hardware or software...?
Cobbs: I assume when you say bootloader you mean something other than the RGB screen,,,cos as I stated in my first post, my phone does not stop on the RGB screen...
Hey Guys, so I have done the stupid thing and flashed my samsung blackjack i600v with the update from samsung.com WM6 (think made for the i607). The phone starts up normally displaying the green WM6 screen and goes into the At&t (orignally vodafone) screen, runs across the screen says goodbye and swtiches off. Sometimes if i press buttons and try and make it think i can get to the home screen but then again, it turns off. Any possible ways that I can flash it back or make it work again?
Anything, a program, tools how on earth do you format a mobile phone back to normal.
Any help or direction on this would be greatly appreciated you have no idea.
Many thanks
Kam
Anyone? please help..even if its to say that the phone is not able to be fixed.
thanks
Can You get into bootloader?
If You can - You need to find a full i600 ROM with Radio part and flash it.
Edit: Here is a LINK - check it - there's a link for ROM also
Hi there, I can turn it on n get it into bootloader mode, it says AT&T bootloader! But it's not being recognized by the computer, what is this radio part? I have downloaded theb ROM!
Thank u
Hi there,
First time user with a desire on the telus network. I was referred to this site through a friend who did the froyo upgrade to his phone.
I have been working all day at figuring out how to root my phone and have had little luck getting any tutorial to work.
most recently I have use the linux version and the windows version of unrevoked and both go through the whole process and say done but leave my phone turned off and to the point that I have to pull the battery to get it on again. When I enter recovery mode and selected recovery the phone flashes the white screen with the HTC logo and then right to black. Previously in the day it would allow me to go to the black screen and allow me to flash the update files.
Can anyone help or point me in the right direction.
cheers
kieran
kierster said:
Hi there,
First time user with a desire on the telus network. I was referred to this site through a friend who did the froyo upgrade to his phone.
I have been working all day at figuring out how to root my phone and have had little luck getting any tutorial to work.
most recently I have use the linux version and the windows version of unrevoked and both go through the whole process and say done but leave my phone turned off and to the point that I have to pull the battery to get it on again. When I enter recovery mode and selected recovery the phone flashes the white screen with the HTC logo and then right to black. Previously in the day it would allow me to go to the black screen and allow me to flash the update files.
Can anyone help or point me in the right direction.
cheers
kieran
Click to expand...
Click to collapse
Reflash
Sent from my HTC Desire using XDA App
are you pushing the lock button in recovery mode or the optical trackpad?
Sometimes people are not intelligent enough and cant flash a phone because they dont read the details in tutorials (--->ME<---)
Hi Developers and users !
I have a HTC Desire from Denmark (Scandinavia).
I have tried to install a custom Rom on the phone which was successful.
After a few months i wanted to go back to the original ROM that it had, because some of the buttons suddently stoped working (Volume down, Menu button,home button). I made a giant mistake and didnt took a backup of my original HTS Desire Rom, so I therefore found a rom on this forum and installed it on my phone.
Afterwards i have had my phone to the repair center and they found out that my phone had condensation, so it couldnt be fixed.
After some months my buttons that didnt work start working again, but now it suddently restarts by itself and sometime when it restarts, it just freezes on the HTC Desire splash screen. After some time it starts up...
Sometime i have to start it via Power button + volume down button -> fastboot -> Reboot.
I think i have a problem with my socalled "original rom" that i have installed. maybe its not the right one to this phone, and thats why I am creating this threat.
I have attached two jpg. pictures of my fastboot screen.
The first picture shows my HBOOT fastboot menu.
The second shows that the fastboot menu has a error in it, when it loads. It says "No image" or "wrong image". Therefore I am 100 % shure that the rom is wrong and not the condensation thing. I have used my phone 4 months after i had it to the repair check without the biggest issues, but now it wont restart sometimes.
I think i maby is missing the right Radio for this model.
I have searched this Forum thin for the same problem, and i couldnt find anything, therefore i am writing this.
Can anyone help me with the right original Rom for my phone model ?
Phone model:
HTC Desire
If you need any other information please write it.
I hope you guys would help m find the right ROM for my phonemodel.
Best regards
Tokay_dk
I am interested in the answer to this, too. I recently purchased an HTC Desire that seems to have the WWE_Asia ROM on it. I would like to install a rom with the Danish language that will work in Denmark because I want to give it to a friend who lives in Denmark.
Hello everyone.
My HTC One M8 showed a message that says UI.System is not responding then shut down. When I try to open it it is stuck on the welcome HTC white screen.
- I tried to hard reset it from the hard reset it but when I do so it shows black screen with green progress arrow and then it goes again to the Welcome Screen.
- I tired recovery menu but it shows the red triangle on the phone then again to Welcome Screen.
- When I connect the phone to the PC the HTC Sync Manager doesn't recognize it in this state.
- The only case when HTC Sync Manager recognizes it is when I go to the hard rest menu and choose Fastboot.
- I downloaded HTC RUU for international phones from the official USA website (I bought the phone unlocked from Egypt) and it started working for few seconds then it prompt error 130.
As you would get, I'm not a very technical guy but I'm welling to do anything to get my device working. I currently use iPhone 5 as a backup phone, and what a horrible device.
Please help me out as I'm now in Germany and so far I could not find a store to help me get my phone back. Send me step by step links or videos and I will follow the procedures.
Thanks a lot for your help.
LostMan1991 said:
Hello everyone.
My HTC One M8 showed a message that says UI.System is not responding then shut down. When I try to open it it is stuck on the welcome HTC white screen.
- I tried to hard reset it from the hard reset it but when I do so it shows black screen with green progress arrow and then it goes again to the Welcome Screen.
- I tired recovery menu but it shows the red triangle on the phone then again to Welcome Screen.
- When I connect the phone to the PC the HTC Sync Manager doesn't recognize it in this state.
- The only case when HTC Sync Manager recognizes it is when I go to the hard rest menu and choose Fastboot.
- I downloaded HTC RUU for international phones from the official USA website (I bought the phone unlocked from Egypt) and it started working for few seconds then it prompt error 130.
As you would get, I'm not a very technical guy but I'm welling to do anything to get my device working. I currently use iPhone 5 as a backup phone, and what a horrible device.
Please help me out as I'm now in Germany and so far I could not find a store to help me get my phone back. Send me step by step links or videos and I will follow the procedures.
Thanks a lot for your help.
Click to expand...
Click to collapse
What? HTC's US website doesn't have the International RUU. Only US RUUs. That's what the error 130 is. Wrong Model ID.
Here is the RUU that you need.
It's a .zip not a .exe, so you'll either have to flash it via fastboot or via your extSD.
To flash via SD, rename the file to 0P6BIMG and place it onto your extSD. Boot into bootloader, and then hboot if the process doesn't start automatically (it should). Then follow the prompts. Vol up to flash, power button to reboot. Super easy.
Hello xunholyx
Thank you very much for helping me out...
I did exactly like you said and it worked beautifully ! No problems at all ....
Many many thanks for the help
LostMan1991 said:
Hello xunholyx
Thank you very much for helping me out...
I did exactly like you said and it worked beautifully ! No problems at all ....
Many many thanks for the help
Click to expand...
Click to collapse
Cool!
I forgot to mention though that you should either rename or delete the RUU.zip from your extSD after the flash, otherwise every time you boot to bootloader it'll try to update again.