Related
Hello,
When starting my 9090 I get a message "Impossible to find SmartFilter.exe check the file or the access path..." and the Pocket remains stuck for a while.
I suppose the uninstall process of the trial version of this programm did'nt run complete, and left an entry somewhere.
Searching for 'smartfilter' doens'nt give any result.
Where to search for autorun/autoload folder or key in the registry ?
Thanks for any help.
Jean-Jacques
Go to \windows\startup\ and delete the shortcut for that program. I'm not sure that's your problem, but it sounds like it to me.
If not, then go to http://forum.xda-developers.com/viewtopic.php?t=7136&highlight=regedit
or search around. I know there are two versions floating on this board. I think the previous is the one I use/prefer. Also, I've been told that when connected via activesync, you can use windows regedit to access your device???? Not sure though.
Good luck, and if you muss up your device, it's NOT MY FAULT!!!!
No way :-/
Thanks, but it's a glue... :?
Neither Windows/startup nore deleting entries of NOVOSEC/Smartfilter helped.
I'm going to reinstall the trial version, and uninstall again :twisted:
JJ
Gone !
8)
go to a company called soti - they have a remote regsitry explorer that is very good..
www.soti.net
Hi. I am relatively new with the PDA scene and as much as I would have loved to read an answer to my question from some other thread instead of starting a new one, I could not do it cos there are none. At least in "idiot's guide" style.
To the question that is stated in the title. As much as I have understood, there are (at least) three storage areas on a device (mine being Vodafone v1520) - the ROM, the EXT ROM and the files that we see on under "My Device" in Explorer. Some of the files have been marked as "ROM" if to look at the properties and those cannot be deleted (at least I haven't found any way) but they can be overwritten (with Resco or smth). The point of my question is that when I overwrite the WELCOME.GIF file (marked as ROM file, it's VF splash screen) it does overwrite it nicely (confirmed) but when I hard reset, it's back. Although I don't understand also why after overwriting I still see the VF logo instead of my own file, that is a separate issue.
The reason I am asking this is that nobody in this forum has been able to answer me how to unlock the EXTROM part on that ASUS P550 that I have. So I thought maybe if I change the STARTER.EXE or GENERALINSTALLER.EXE to something pointless, the EXTROM part won't be installed.
Although I suspect the VF logo is displayed from EXTROM part while booting, cos there is nowhere else that same file in normal storage.
Summary:
1) Does changing files marked as "ROM" really change ROM files or is it until the next hard reset and why?
2) Does anyone know how to unlock and unhide the EXTROM part on ASUS P550?
3) Does anyone know where the VF splash screen comes from while booting?
If anyone has ANY information on these issues, PLEASE enlighten me. It seems that there are a lot of senior members who have the knowledge but are quite unwilling to share it. I don't know why but it seriously sucks that they don't reply to threads or PM. I thought this forum was for helping each other, not giggling behind the screen: "I know something You don't". At least that is the impression that I have recently gained when trying to contact people that have the knowledge.
Thanks.
aiiro
The answer to your "stupid" question - "are ROM files REALLY ROM files" - is NO.
The question is not stupid and the files are really not the files.
Actually you have only the information about the files in ROM - the name, the size and other attributes. That's it.
You are not really overwritting anything when you copy the different file with the same name to ROM.
If you somehow dump the ROM from your device - you'll get real files.
Welcome Gif can permanently be changed only in dump.
Unlocking EXTROM .... I am not sure that I got what you mean. And why do you want to do that. But do the following: with Resco Registry go to
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC2\FATFS
Change MountHidden value from 1 to 0
You will be able to see the EXTROM content.
VF splash screen definitely comes from Windows folder of your device while booting - it's a part of the ROM.
OK, thanks for a quite thorough reply, but I still don't get it then - why does Resco (or similar prog) ask to overwrite the file? OR, if it doesn't overwrite it, how do I see the new file in Windows folder and the prog looking for splash screen file does not?
The EXTROM fascinates me because after hard reset the device is installing some "Auto Installation packages" and as far as I have found out those come from the EXTROM. I suspected that the WELCOME.GIF came from there too but now I am not sure. Might have to dump the ROM somehow and look into it but there are not many people with P550 and like I said those who have, don't have the willingness to help with that.
BTW, thanks also for the tip about the registry, but I have tried all the registry tweaks that I have found (including the abovementioned) but none of the works...
Thanks again and looking forward to Your (or anyone else's) comments.
aiiro said:
OK, thanks for a quite thorough reply, but I still don't get it then - why does Resco (or similar prog) ask to overwrite the file? OR, if it doesn't overwrite it, how do I see the new file in Windows folder and the prog looking for splash screen file does not?
Click to expand...
Click to collapse
Resco has been done like you have!
Try to do the following: copy your own Welcome.gif to Windows folder. You will be prompted to overwrite. Say yes. Then simply delete that file. It will not disappear - the old version of file will become visible again. ROM is not a number of files - it is one file which contains a copy of the data that later will be written (flashing process) straight to a read-only memory chip.
(Pay attention on my words "read-only")
Imagine yourself a wall painted with a hell of 100 dollar bills. You can see them. But you cannot take one of them. You can even glue you own bill upon the drawn one. It will work. But when you wash the wall (hard-reset) - your real paper bill will be washed down and the old painted one will appear (sorry for metaphor)
BTW, thanks also for the tip about the registry, but I have tried all the registry tweaks that I have found (including the abovementioned) but none of the works...
Thanks again and looking forward to Your (or anyone else's) comments.
Click to expand...
Click to collapse
Nothing works probably cause the registry is write-protected. Unlock your registry by changing the following:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
But! You would do it with the digitally signed regedit. For example - one is attached. Unzip it to your device, run it, change the security policy settings, reboot. Then try to tweak your Asus again.
The attached regedit has OEM Sign 2005 - hopefully it will work for you.
Thank You for a thorough explanation and especially for the metaphore - it was very helpful.
But about the registry - wow... I mean I haven't even heard of unlocking registry...
As usually, answers are generating new questions. The ones I have now are:
1) How come some of the registry tweaks made with Resco still work even now - like showing the clock instead of battery (changing the TBOpt key) etc and the values are still there after soft reset?
2) Resco is also digitally signed, isn't it?
3) If I use this app, will hard reset still create a clean registry? (The answer to this probably is "yes" but I still ask just to be sure).
4) Can I seriously f**k up something with this method?
Thanks in advance.
But
aiiro said:
... answers are generating new questions. The ones I have now are:
1) How come some of the registry tweaks made with Resco still work even now - like showing the clock instead of battery (changing the TBOpt key) etc and the values are still there after soft reset?
2) Resco is also digitally signed, isn't it?
3) If I use this app, will hard reset still create a clean registry? (The answer to this probably is "yes" but I still ask just to be sure).
4) Can I seriously f**k up something with this method?
Click to expand...
Click to collapse
Read your PM - sure I don't have any subscriptions, but it's OK (I mean PM) - it works.
So:
1. The point is that not the whole registry is write protected - only several "important" parts mostly in HKLM. Normally - if you change someting in HKCU - it will work even with the protected registry. The vendor only protects the keys and values that can cause some "critical" system changes.
2. If to tell the truth - I know that Resco has digital signature - but anyway the permission level of it does not allow you to modify the protected keys. So that's why I offered you to use Regedit, signed with the customizers.
3. For sure - after HardReset you will return to factory defaults completely - it means you registry will again become clean and write-protected.
4. It depends upon what you mean writing "seriously". The worst thing - to damage the bootloader, but you will never do that modifying the registry. So - feel free to do whatever you want - you will always be able to return to factory defaults.
OK, thank You very much for the explanation! I have bookmarked like 200 pages related to PDAs, which means that if even only every 10th page gets bookmarked, I have gone through thousands of pages in 4 months and I haven't stumbled on this information before. So everything You have enlightened me about here is most useful, thanks again!
I hope I will not push it but since You have been so helpful and seem to know stuff, I am risking asking some more questions. First of all, would You happen to know a good "idiot's guide to flashing ROM"? I have read those on the wiki but as they are for HTC devices and asus mobile club russia does not have any basic explanation in English, it's pretty hard to catch the idea. I know that much that there is a PC involved with some kind of programs etc, but that's about it. I don't even know what the hell is a bootloader. There also isn't any good PDA architecture drawings lying around in the net
The second question is also related to hardware. I have the Vodafone v1520 as mentioned above and it has a small annoyance - the earpiece volume adjustment during call does not work. The slider moves and I hear the clicks getting louder or quieter but the volume level of the caller voice does not change. I took it to a repair shop and they told me that it's a faulty hardware but I know that there are people with exactly the same problem in this forum and I find it hard to believe that they installed some kind of faulty earpiece on all these devices. Or is that possible? What do You think?
Thanks.
aiiro
Sorry dude but both your last questions are about the specific device - your Vodafone. To answer - I should buy Asus P550 and get an experience first. It's only 700 bucks in my country but I am not sure that I really wanna have it. My current device (pretty old now) is P525 and the next one will probably be Diamond or something better and more expensive.
Second thing - I am not IT professional - I am just a user. OK, I always use my own (cooked) ROMs but it does not mean that I can give the answers to all your questions!
OK, I knew I was pushing it a little bit and in no way did I mean that You should make some kind of spendings. I just thought maybe You had any ideas and maybe ASUS devices are similar enough that they are compatible ROM-wise with each other or something like that.
Anyway, thanks for those thorough replies - You have been most helpful! As soon as I will have some time I will try the registry things out.
Thanks again and good luck!
try to install this cab file ,I make it .you can QQ me by my QQ:421264988 my E-mail:[email protected]
i'm sorry ,I chinese ,and my English is very poor
安装这个CAB文件试试,我的手机也是P320,安装完解锁成功,但在删除程序里看不到之后安装的程序,欢迎和我交流,我的QQ:421264988 E-mail:[email protected]
对不起,我是中国人,我的英语很差
Modified registry values don't survive reboot?
Try switching the device off before reboot.
The registry is not flushed to disk at every write.
And search the net for
flushing registry pocketpc
Click to expand...
Click to collapse
newxda-new said:
Try switching the device off before reboot.
The registry is not flushed to disk at every write.
And search the net for
Click to expand...
Click to collapse
So if you reset the handheld without putting it into suspend mode before, you risk losing configuration data (registry settings)?
Hey guys,
I'm a newbie here, just joined last nite... I recently purchased a Touch Pro thru my local SPRINT Store. I was searchin' the web for an application that would allow me to record phone calls of my choice, and from what I can gather, ACR seems to be the way to go.....
So I read thru some posts here and decided to take it upon myself to give it a shot. Being that i'm rather ignorant to this sorta stuff, i'm a lil nervous about screwing something up.... I'm not an idiot, (well atleast not a complete one) but I am having some difficulties making this install go smoothly. I was able to download the 1.2.2. version to my phone. But the framework update doesn't quite seem to be going as smoothly......
I tried d/ling the 3.5 framework to my computer, then transfering it to my phone, but that didn't work.... Tried d/ling it on the phone itself, and it seems to have completely downloaded the file, but after that, nothing happened. I browsed thru the phone using file explorer to see if i could locate the NETCFSetupv35.msi file.....but cannot locate it any where.......
I'm sure this entire thread makes me look like a real dumbass, but i'm tryin my damndest to get this application to work, and it's frustrating the hell outta me cause i'm not that good at this stuff yet... Can someone point me in the right direction? I really appreciate the help, and atleast you all can have a good laugh at my ignornace.... you all make it look so easy, i'm very envious....
Is the 3.5 framework on the phone somewhere now since i downloaded the file? Do I just need to execute the file? or did it do that already and I'm just missing something??
I'm able to get the framework file on my phone. But for some reason, when ever I try to run it, it says there is no application associated with the file name. CAN SOMEONE PLEASE HELP ??? GIVE ME A HINT? ANYTHING? PLEASE???
plse check..
the following ( if you did ignore )
1. do you have windows mobile device centre, installed on you pc..?
if you have, connect phone with usb to pc.. sync... etc..,
if you have ..then.
install ...NETCFSetupv35.msi from pc... not phone ( it is not a .cab file, but .msi file ..so pc installation. ?
2,application will install from pc and tell you to check phone ,when required to do so ..install on device, not storage card of phone
thats it ...
good luck
Would also suggest you search in the Touch Pro forum as this is the HD forum
My sincere appologies. I did not realize I was posting in the wrong forum. I will direct my question to the proper place. Thank you.
Thread closed
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
its in one of your phone/device settings to let u download and install apps or cabs not digitally signed. thats all, i believe. just find it and check it off. or look for advanced config cab if u can find it and install that. it has an option in there also to let u download/install whatever..
mullethunter said:
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
Click to expand...
Click to collapse
The cab I have attached may help you...it's some SDK certificates that will allow installation of certain unsigned apps, but I don't know if this is what the ones you're running are requiring and missing. It won't harm anything to try this one, and you can easily uninstall it if it doesn't do the trick
Thanks guys. Sirphunkee - that cab actually installed, but I'm having the same problem. Another forum has suggested that I take the device back to T-Mobile, but it just seems like there's a setting that's not right in the OS. Demandarin - I've looked for various security permissions in the UI with no luck. I've mucked around with some Policy values in the registry per some threads on this forum, but still nothing.
I'll keep trying, and thanks.
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
mullethunter said:
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
Click to expand...
Click to collapse
Have you already installed .Net 3.5? It's a framework that many other programs use (and need) to install, and it's not on the TP2 by default...it's the only other think I could think of that would keep you from installing stuff. Cab is attached, if you don't have it already.
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
mullethunter said:
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
Click to expand...
Click to collapse
Well yeah what's weird is that I never had to use that to get any of those apps installed
This app is designed so that you can keep track of any medications you take on a regular basis.
When you last ordered a particular drug, how many you currently have to hand, which surgery the repeat was requested from and which pharmacy filled the prescription.
It is designed to be used for multiple patients, surgeries, pharmacies and doctors.
It was initially an Access database but I thought that migrating it to my PPC was a challenge I might be able to complete.
There will also be the ability to log doctor's appointments as well, hopefully.
All data is currently stored in an SQL-CE database.
For reasons I am currently trying to solve, when you open any secondary form with a data table and then return to the main menu you are unable to go back into any other form again.
Changed to a tabbed layout, screen shots attached.
09/02/2011
New version attached with new format SQLCE.
17-Mar-2011
Latest version attached
All data entry and editing working - I hope.
08-Apr-2011
Latest version, autoscroll and popup SIP.
Possible dependant files.
I am coding for CF2.
[Reserved] - For Comments
deedee said:
[PROJ] Prescription Medicines Manager
...medications you take on a regular basis.
When you last ordered a particular drug, how many you currently have to hand, which surgery the repeat was requested from and which pharmacy filled the prescription...
Click to expand...
Click to collapse
Thank you!
These records can be life-saving if you have them with you at the right time. I have tried many systems of keeping track, but rarely managed to have anywhere close to this much information on hand.
I have not had time to try it out properly so I do not yet have any comments or suggestions. For now, I just wanted to say THANKS!
Glad it's going to be if use to someone.
Hopefully by the end of tonight I will have a new version up with the ability to add records to each of the tables. No interlinking yet and at the moment editing is also broken but I am getting there.
deedee said:
Glad it's going to be if use to someone.
Hopefully by the end of tonight I will have a new version up with the ability to add records to each of the tables. No interlinking yet and at the moment editing is also broken but I am getting there.
Click to expand...
Click to collapse
Don't feel rushed on my account. It's great that you're interested in this project, whenever you finish will be soon enough.
Meanwhile, I'll play with it and start planning how to "feed" it my information.
Have you considered some sort of encryption? It just occurred to me that it will hold a lot of very personal information.
Again, thank you.
deedee said:
...at the moment editing is also broken...
Click to expand...
Click to collapse
I know next to nothing about programming, but would the PC editor you wrote for the W Watcher calc work for this project? That might make it easier for the user to input the information AND save you some programming...
(BTW: I was very impressed with how quickly you developed those applications! Very usable and no charge for fast delivery!)
Jesterfell said:
I know next to nothing about programming, but would the PC editor you wrote for the W Watcher calc work for this project? That might make it easier for the user to input the information AND save you some programming...
(BTW: I was very impressed with how quickly you developed those applications! Very usable and no charge for fast delivery!)
Click to expand...
Click to collapse
Unfortunately the WW editor is designed for an XML file and this app keeps everything in an SQLCE database. I am trying to find a nice, useable and, more importantly, free desktop app to edit these files and am trying a couple out at present.
While a purely PC based editor would be easier from a WM coding point it would stop the app being completely mobile and standalone.
New version added to post 1.
You can now add records.
For desktop managemnent try
SQLCE Desktop Manager
FlyHoward SDF viewer
Neither of these seem to be free though the second one does have a 14 day trial.
deedee said:
... While a purely PC based editor would be easier from a WM coding point it would stop the app being completely mobile and standalone...
Click to expand...
Click to collapse
Of course!
Sorry, I got tunnel vision and forgot the project's purpose.
What am I missing?
I have been unable to run Prescription Medicines Manager on my HTC 8925 (Kaiser) with WM 6.5.x.
When I run the EXE all that happens is that the WM wait animation plays indefinitely until I switch to another application.
Since I play with this phone a lot, I hard reset it to clear any lingering results of my modding (it's a spare phone, so no great loss). Before installing other programs, I ran PMM again, but the same thing happened.
I got the same results with an even older HTC phone running WM 6.1.
SQL desktop applications
I found some free SQL desktop apps. I was only able to get one, SdfBrowser, to read MedicalRecords.sdf and all it allowed was viewing the structure and creating a query.
I'll keep looking, but I agree with you that being totally portable is very important for this project.
LINKS: SdfBrowser --- Resources link
Jesterfell said:
I have been unable to run Prescription Medicines Manager on my HTC 8925 (Kaiser) with WM 6.5.x.
When I run the EXE all that happens is that the WM wait animation plays indefinitely until I switch to another application.
Since I play with this phone a lot, I hard reset it to clear any lingering results of my modding (it's a spare phone, so no great loss). Before installing other programs, I ran PMM again, but the same thing happened.
I got the same results with an even older HTC phone running WM 6.1.
Click to expand...
Click to collapse
Completely forgot to say, you will need to install SQL CE on your HTC.
I do not usually resort to smileys, but my lack of knowledge is frustrating!
deedee said:
Completely forgot to say, you will need to install SQL CE on your HTC.
Click to expand...
Click to collapse
I installed SQL CE with no errors but got the same lack of results. The phone did become VERY sluggish and Task Manager still showed "prjMedicalRecords" running as a process.
Does prjMedicalRecords.exe need to be installed?
I just executed it from the SD card, and then tried it from the device memory. I placed MedicalRecords.sdf in the same directory each time.
Update: After about 5 min of the WM wait animation spinning, got the following error message:
"File or assembly name 'System.Data.SqlServerCe,Version 3.0.3600.0, Culture=neutral, PublicKeyToken=3BE235DF1C8D2AD3', or one of its dependencies, was not found."
I opened the SQL CE .CAB file and it DOES contain "system.data.sqlserverce.dll" it is meant to be installed to "%InstallDir%" and the rest of the DLLs go to "%InstallDir%\v3.5". I used file explorer to look in those directories (%InstallDir%="Microsoft SQL Server Compact Edition") but did NOT find "system.data.sqlserverce.dll" in either dir.
I copied the DLL to "%InstallDir%\v3.5" and ran the program again. The same results occurred.
After soft reset, copied the DLL to "%InstallDir%" and ran PMM again. The same thing happened, long wait, then error msg.
I am falling asleep now, but will try re-installing .NET 3.5 and running PMM again. I'll let you know what happens.
I had gotten the same error before installing SQL CE but did not connect the error to PMM so I ignored it. This time nothing else was happening on the phone.
Apologies for not giving the initial steps, I am new to development and forget others need to be given the assumptions.
SQLCE needs to be installed, as you have done. PMM is just an exe, copy it to the device.
PMM and the SDF file need to be placed in \Program Files\prjMedicalRecords on the device itself. At the moment this location is hard coded and is on my list of things to do to make it "moveable". HTH
New version in post 1 that is now independent of location, just make sure both exe and SDf are in thhe same place.
deedee said:
New version in post 1 that is now independent of location, just make sure both exe and SDf are in thhe same place.
Click to expand...
Click to collapse
Sorry, Deedee. It still does the same thing.
.1. I put both files in device memory (just in case): \Program Files\prjMedicalRecords\
.2. Tried to re-install NET framework 3.5--it refused to install in either device or card memory, saying the same version was already in ROM.
.3. Re-installed sqlceppcwce5armv4i.cab
.4. Ran prjMedicalRecords.exe
After the same delay, it gave the same error.
It also gave a NET error that, because of the delay between program launch and errors, I did not associate with Medical Records before, but it only occurs after I have launched prjMedicalRecords.exe:
"The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET compact Framework is recommended. Support info: -2147483643 (80000005)"
Thank you for your continued interest.
Not sure what the error is pointing to but I am coding for .Net CF v2, CAB in post 2, try installing this.
OK, finally tried this on a virgin device, without using the "debug" option in VS2005 to copy the files and discovered that .NET CF2, along with SQLCE 3 and SQL CE 3 replication is needed.
All CABs are in post 2.
There is a new version hopefully out this weekend with the ability to log patient medications and doctors appointments.
Editing is still on the road map, as is deletion.
New version in post #1, CAB format as well.
Make sure all the dependencies are installed, for me this has been .NET CF2 and the SQLCE cabs.
There are bugs I am aware of but please list anything and everything. As this is my first real App any feedback is welcome.