Develop Bugs

Touchflo 3d not autolaunching after reset at times.

Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.

Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.

I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.

Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps

Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.

aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)

i have had this happen a couple of times as well.

quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.

It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS

disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.

I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying

Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!

I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!

Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507

I copied manila.exe from windows to my start-up folder, now it works fine.

yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.

Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?

touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose

I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?

Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse

Phone keypad gone

Hi, first of all, sorry if its a repost.
I have a touch pro 2 and upgraded it to WM 6.5 couple of months ago. now i realize that at the home page, I press "phone", nothing come up. it suppose to show me a phone keypad for me to press numbers to call. i tried soft reset twice, but nothing happen. it seems stuck, and cant show the keypad. I just realize it when i was about to save a new number.
Can somebody help me?

You may have already checked this, so I apologize if this sounds stupid, but did you try pressing the little phone icon at the bottom of the screen (where the soft keyboard button usually is, except it looks like a phone instead, at least on my Verizon TP2). That happened to me the other day while trying to enter my pin for voicemail and I found the soft keyboard (phone pad) had simply collapsed. One tap and I was back in business.

thx2. relax, it wont sound stupid, any solution is welcome here. ya i check already and still no use. anybody else have the same problem and got the solution?

This sounds almost exactly like the same proplem i´ve had twice now. If that is the case then your sms capability should be gone as well.
The data connection (GPRS, HDSPA or whatever is availiable in your area) wil be working fine but you should notice that the antenna icon at the top of the screen will show no connection, i.e. antenna logo with exclamation mark.
If your problem is consistent with this behavior there is good news & bad news.
Good news: There is a fix.
Bad news: Only fix that i know of so far is to do a Hard Reset.
Seeking help, i posted a question about i yesterday. Here it is:
http://forum.xda-developers.com/showthread.php?t=646853
It´s almost as if the "phone software" has generated an error and shut down. I don´t know how to restart it. Tried switching to airplane mode & back. Tried redetecting the cellular network and got prompted for a PIN code. Entered it and then nothing. Still no phone.
Regards
ELO

SLOW and my contacts are not showing, but are there if someone calls?

This is the third time I have had this problem. Randomly my phone slows down to a halt, the data connection does not work, most setting icons take 10 minutes to load if they do at all yet my texts still work.
There are NO apps running in the task manager.
I have removed most of my programs.
My mods are just removing the TF3D crap, nothing serious.
My stock task manager icon is missing from the top right.
and when I rebooted the phone I would get two errors, one with opera and the other with ~pcom-something.exe"
The other times I reset to unit to "factory out of the box" but I am sick of resetting up the phone with my apps, mods and such.
Has anyone seen this before?

What rom do you have on your phone ? What do you mean by removing all the tf3d crap? And have you flashed different roms without using task29 in between? It sounds like its time to task29 and reflash.

Sorry, I removed the TF3D stuff with mostly registry edits. I am still on a stock 6.1 rom.

Well, it could be pretty work-intensive to try and track down exactly whats causing your slowdowns and freezes, and since you have had to keep on hard resetting it, I would think that you dont really have much to lose by flashing a new rom. If you like the stock 6.1, you could just download it from the Windows Mobile Rom Developement subforum. Alls you would have to do is hard spl your phone and then flash it, it should take less than an hour start to finish, including downloading the rom.

Also:
My stock task manager icon is also missing from the top right.
and when I rebooted the phone I would get two errors, one with opera and the other with ~pcom-something.exe"
I can set this back to a stock ROM with the phone itself and I have all my apps on my card. Doing all the registry things is a pain only because I did not memorize them... YET, haha.
Is there a better task manager to see whats eating up resources?

If you're running the ROM that actually came stock on the Tilt II, then the hot fixes for the issues you are describing can be found here on HTC's website.
http://www.htc.com/us/support/tilt-2-att/downloads/

I'm on verizon, will it matter?

Mother F-er.
Just rebooted to try and get the errors again and instead got this:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source.
Press Volume Up to reset your device or press any other button to cancel.
The operation will delete all of your personal data and restore the device to it's factory default settings."
I guess my decision is made, but wow I am not happy. This phone may go into a lake.
... edit:
Volume up does not do anything. AWEsome.

Yeah it matters, here are some Hot fixes for you're touch pro II. Don't know if they will help ya though: http://www.htc.com/www/supportdownloadlist.aspx?p_id=250&act=sd&cat=all

I took the battery out again and put it back in. Same message and the volume up did not work again.
So I pressed volume up about 100 times then held down the power button. Nothing changed.
Then.... I slide open the keyboard and closed it. Put the unit down and about 45 seconds later I heard all 100 volume up presses in a row. The stock WM volume menu was over the windows boot screen, and then the task bar showed up. Then the unit shut off and rebooted but took forever. It looked normal , but SLOW.
Now:
"A problem has occurred with Opera9.exe"
then:
"A problem has occurred with cprog.exe"
WTF is going on. I have not installed/uninstalled ANYthing for weeks.

set the phone to factory defaults last night and changed everything back. Meh.
Thanks for the ideas guys and I will be doing those "hotfixes" very soon!
Cheers,
Dan

Well, this phone is doing it yet again.
It barely works.
everytime I press something it takes between 5 seconds and 1 minute to do it.
i have no signal
most programs do not even try to start
resets change nothing (done this about 100 times today)
What the hell is going on with this phone? This was just as random. Was working as normal until around noon and then it just slowed way down and I could not make calls or answer them.
Grr.

so:
when I reboot the phone, I have the green start up screen for ~5 minutes.
the phone does not work after it fully starts up.
I can not open "remove programs"
I do not have the task manager in the top task bar, but when I go into settings and open task manager, there is nothing running.
I run "cleanRAM" on level 3 and there is no change.
It is still very slow I have not installed anything new at all, so this sudden change reasoning is unknown. This may be my last windows phone as I am growing tired of these random major failures.

Well verizon sent me a new phone.
*PHUCK*, its WM6.5 and I hate it.

Mango users, watch out for unresponsive touchscreen

Title says all. I was just chillin' listening to some music (Let's Get It to be exact) and when I pressed my power button to check and see how fast the WiFi reconnects, I swiped up and nothing happened. It was like that for about a minute or two, the volume rocker worked and I could hold down the camera button and go to the camera, but the touch screen just wouldn't work. I popped off the back and was about to remove the battery and thats when everything went back to normal...pretty odd...just a heads up.
Wifi now reconnects instantly. I am pleased

strange... not had any problems like this at all on mine yet...
Seems VERY responsive, been using it all lastnight over and over and this morning.
what phone you have? im using the mozart

Keefo said:
strange... not had any problems like this at all on mine yet...
Seems VERY responsive, been using it all lastnight over and over and this morning.
what phone you have? im using the mozart
Click to expand...
Click to collapse
Dammit, I thought I said what phone I was using...I'm on the HTC Arrive. It hasn't done it since I've posted..I highly doubt it'll happen all the time (probably won't ever happen again)..just wanted to mention it.

This happened to my arrive right as it was done updating on the screen that says the update is done...the close button wouldn't work, but I remember reading this thread so I waited it out and it started to work after like 2 min

I am having the exact problem on my HD7, only seems to occur if I am listening to music. The lock screen appears, but I cannot swipe.
Mine doesn't always come back and I have to remove the battery.

I have the same issue every once in a while. I'm not on Mango though, I'm running NoDo on a HTC Surround.
It's happened about 5 times in the last six months.

I've had the same issue since before NoDo. The quickest fix is to try turning the screen off and then on again, sometimes it takes a few attempts but it normally works.

haven't noticed on dvp or anything I wonder if its a htc thing...

I haven't noticed it, though I did get the red screen associated with changing the reg entries to get 32 bit color one.
Interesting side not, when I was updating to Mango, on one of the reboots I got the red screen and thought I was screwed, but the update process continued and on the next reboot it was normal again...

ms79723 said:
Title says all. I was just chillin' listening to some music (Let's Get It to be exact) and when I pressed my power button to check and see how fast the WiFi reconnects, I swiped up and nothing happened. It was like that for about a minute or two, the volume rocker worked and I could hold down the camera button and go to the camera, but the touch screen just wouldn't work. I popped off the back and was about to remove the battery and thats when everything went back to normal...pretty odd...just a heads up.
Wifi now reconnects instantly. I am pleased
Click to expand...
Click to collapse
nope havnt come across this yet on my Samsung Focus. The only issue seems to be the increased boot up time(phone stays on d Samsung logo screenfor a long time) but I am quite sure its due to Samsungs crappy bootloader and besides I hardly have to reboot WP7 ever anyway

Hey, has anyone else noticed that weird icon where your signal and data icon should be?
Idk if its the new icon for no signal or what...but when I unlocked my phone, I saw an icon that looked like the copy and paste icon where my signal and data icon should be.

I must say I'm noticing this on third party apps a lot, I don't know whether it's because they are downloading data from the Internet or what but it's happening quite a bit at the moment. LG Optimus 7 btw.

[Q] Help: Wifi, Bluetooth, Screen Rotation stopped working

Hi there,
i couldn't find my problem already discussed via the board search, so i'm posting it here. i hope this is the right board, if not please relocate.
i'm using the find7a since about 1 year now. the only updates i did for colorOS were the ones that have been proposed automatically via the popups. but these i did every time.
i have alwas had several issues with the phone/os, mostly random shutdowns without any reason. but at some point, these shutdowns suddenly declined and i got used to live with the few that still occur from time to time. but now i have a much bigger problem and i don't know where it came from:
few days ago, i got the popup that a new os-update was available. i had a little time so i did it instantly. without any problems the update was installed and after that the phone booted as always and nothing strange happened. 1 day later i recognized that something had changed. i wasn't able to turn on the wifi anymore! same goes for the bluetooth. also the automatic screen rotation (when you turn the phone in a right angle) didn't work anymore! but all of them DID work for the 1 day since i made the last update. so i assumed it has nothing to do with the new os-version (which is 1.2.9 btw). i didn't change anything in the phones settings, everything was the same. but from one moment to the other these three problems suddenly came up. maybe even more that i didn't recognize yet.
although everything worked fine for 1 day since the update, i thought maybe the update could be the problem after all. so i wanted to flash another version of colorOS. i tried the 2.0.8i which was considered stable by the official oppo board admins on friday. the flashing worked fine, colorOS 2.0.8i booted, but the problems remained! still no wifi, no bluetooth, no screen rotation.
next thing i thought: maybe it's a hardware problem. so i flashed another ROM (always making a factory reset + wiping all cashes and data from the internal storage first), i tried a few. they were all flashed successfull but most of them hung up during the first boot sequence (cyanogenmod, paranoid, nameless), i always got stuck in the loading screen. last one i tried was OMNI ROM, and this one finally worked, meaning i got it started. first thing i did was checking the wifi connection and what do you know? the wifi worked just fine, my home network was found immediately und the connection went all good! which means a hardware defect should be out of the question.
this brings me back to thinking the problem lies within colorOS. which would be very sad becaue i really like colorOS and i would like to keep using it!
reproduction of the issues:
to reproduce the problems, when you are on the home screen you simply have to drag down the shortcut-menu. then tap on "wifi" and watch the symbol turn into the one for "loading" (the circling line). and then: nothing happens. the loading symbol just keeps on circling on and on. when you slide the menu up and down again, the normal "wifi-off" symbol shows and wifi is not turned on.
almost the same goes for the bluetooth. only when you tap this icon, the loading animation stops after a few seconds und the "bluetooth-off" icon appers again, this time without sliding the menu up and down. bluetooth stays turned off anyway.
for the rotation problem you just need to got to an app, where you can type in some text, f.e. whatsapp or gmail. tap the message area to make the keyboard and the cursor appear and then turn the phone from vertical to horizontal. normally the display should rotate automatically, but it doesn't it just stays in the vertical view mode. of course the rotation ist activated all the time, so no need to advice that
the rotation problem does not only occur when trying to type sth. in but also when i want to watch videos (f.e. with the vlc player app). the video stays locked in the vertical mode, making the image very small of course. this is also very annoying!
so, what do you think could be the reason for my problems? and what could i do to solve them? i hope you can help me.
i attached a log-file which hopefully shows the bugs.
my current specs are:
find 7a
colorOS 1.2.9
TWRP 2.8.6.0
greetings
tim