Related
My Uni got stucked at splash screen i.e the blue O2 screen (not bootloader).
The story was like this:
Just before it happened, I was trying to enter the bootloader to flash my ROM, i dont know how i did it but somehow there was some charactors on my screen, some settings.. My curiousity lead me to play around with the settings, I couldnt remember what did i do, I just press the up and down button and the settings changed. Feeling bad that it might ruin my precious Uni, I quickly soft reset it. And then BOOM! I cant start it anymore. It just stucked at the blue O2 splash screen.
Pls pls anyone know how to get back to the setting screen again? I guess it was some button combination to get into that screen. Does anyone know what is the combination?
try this tools
instructions:
-disconnect USB cable
-disable USB connection in desktop ActiveSync
-connect USB cable
-start mtty
-create new connection and select USB from ports
press enter to see USB prompt in mtty:
USB>
type (dont copy&paste):
task 28
and press enter
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
cheers
indra9110
indra9110 said:
try this tools
If the result is the following then you are out of luck:
flFormatPhysicalDrive:status=23
DOC_format failed!
Click to expand...
Click to collapse
It says exactly like that! Can anyone help?
try hard resetting ur phone.
keep the two minus buttons pressed and they with the pen click the reset button.
friend, hard reseting, flashing, mtty, took off battery, i've done all that.. nothing works.
satanisme said:
friend, hard reseting, flashing, mtty, took off battery, i've done all that.. nothing works.
Click to expand...
Click to collapse
Forget it. You have a defective internal flashdisk. The only option is to return it to the vendor/manufacturer and have it repaired under warranty.
believe Wiz words, because i had the same problem !!TWO!! times in three months.
next time i will smash the Uni against a wall
Shoot! 2 times in 3 months? What did you do dude?
I'm so sad coz I'm currently in Malaysia and the unit is from UK. I asked the O2 service center over here and they said they dont have the jurisdiction to repair it. Even opening up the Uni will temper the warranty. What a bull! Now I have to find a way to send my Uni to UK quick since the warranty is gonna void in 2 months time.
Hello,
I'm stuck at the screen, DOPOD ENJOY MOBILITY,
R 1.1100
G 42.45.P8
D 1.30.111.WWE
when run the mtty, ask for com port, not USB able to be selected.
regards, yan
possible solution
Hi guys,
There is a tip from Dubli for those who stuck on splash screen:
1. Get mtty
2. Connect to USB, press enter
3. Type task 32, enter
4. Type 28, enter
5. Flash CE Rom only
6. Hard Reset
Make sure to type task 32 first before task 28 coz task 28 alone wont work.
Pls try this and tell me the outcome. I cant try this coz i just sent my uni to UK just now.
Stuck on Splash screen ..please help urgent
hi guys,
I have a Xda Exec phone
I'm stuck at the screen,
R 1.09.00
G 42.42.P8
D 1.30.107.WWE
I have tried using the procedure
1. Get mtty
2. Connect to USB, press enter
3. Type task 32, enter
4. Type 28, enter
5. Flash CE Rom only (here is where i am stuck ? what does it mean to flash rom ?)
6. Hard Reset
What do i do ? Please help
Does anyone know if the Clear Storage will actually reset the total call timer? It says that its supposed to revert back to factory settings. But i'd like to be safer than sorry.
Thanks
i don't know about it for sure, but i did clear storage yesterday and i installed my trinity with the new rom and it did erase the call timers
GLO said:
Does anyone know if the Clear Storage will actually reset the total call timer? It says that its supposed to revert back to factory settings. But i'd like to be safer than sorry.
Thanks
Click to expand...
Click to collapse
By clear storage do you mean your sd card ?
If yes, it won't clear your call timer.
If you mean hard reset, then yes it will erase all datas. But you can do a pimbackup and you'll restore it again.
mbon said:
i don't know about it for sure, but i did clear storage yesterday and i installed my trinity with the new rom and it did erase the call timers
Click to expand...
Click to collapse
Really? I was told that Clear Storage is just a hard reset - which shouldn't affect the call time which is stored somewhere else in the eeprom....
ww2250 said:
Really? I was told that Clear Storage is just a hard reset - which shouldn't affect the call time which is stored somewhere else in the eeprom....
Click to expand...
Click to collapse
You are right. the call timers never go zero, even after flash.
Maybe there is some special thing that can erase them
For completly reset the call timer's you have to install Olipro hard-spl 1.30 based on an MFG and have rtask commands enabled.
http://forum.xda-developers.com/showpost.php?p=1188555&postcount=1
After that go to mtty and:
rtaskb
ate1
atv1
[email protected]=270f,270f
You have to see:
OK
retuoR
task8 (for reset the device, or press the reset button)
After that the call timer's in device information have to be at zero!
If you whant to reset it in the os to you have to delete all the keys in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\CumulativeCallTimers\Line_0
Thank's.
ausdim said:
For completly reset the call timer's you have to install Olipro hard-spl 1.30 based on an MFG and have rtask commands enabled.
http://forum.xda-developers.com/showpost.php?p=1188555&postcount=1
After that go to mtty and:
rtaskb
ate1
atv1
[email protected]=270f,270f
You have to see:
OK
retuoR
task8 (for reset the device, or press the reset button)
After that the call timer's in device information have to be at zero!
If you whant to reset it in the os to you have to delete all the keys in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\CumulativeCallTimers\Line_0
Thank's.
Click to expand...
Click to collapse
Hi Ausdim,
Do i have to do the whole lot or does that mean that if i only do the registry hack, and the timer will be zero?
Thanks
GLO said:
Hi Ausdim,
Do i have to do the whole lot or does that mean that if i only do the registry hack, and the timer will be zero?
Thanks
Click to expand...
Click to collapse
If you do just the registry trick the the call timer's will be reset but only at the os.
It is like when you flash a new rom.
But in the device information the call timer's will be the same.
Thank's
ahhhhhh ic maybe my call timer is set back to 0 because i installed olipro 1.2.. or maybe u can do the registry.. but i don't know how...
cheers
If i do the whole lot will i loose my Network settings? (the handset is unlocked from the Network supplier)
Hi all...
My Blue Angel wont hard reset. I just bought it second hand and have been trying to hard reset it. I read up and the instructions are to keep the power button pressed while resetting with the stylus. But no matter how many times I tried, this procedure only soft resets the device. Please help!
Try it the software way by going to start>settings>system>clear storage>1234>ok.
kareem9nba said:
Try it the software way by going to start>settings>system>clear storage>1234>ok.
Click to expand...
Click to collapse
Hi buddy.. thanks so much for the reply... but its not working.. tapping on the clear storage icon in settings does not bring up the password screen or do anything at all
wat are my other options people... pls help
anybody??????
i think you make wrong HardReset.
for Hard Reset a BA just press RECORD+CAMERA/PLAYER+SOFT RESET 2 sec. and walaahhh.... there you go.., You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
have a nice reset
Stevo.Mksr said:
i think you make wrong HardReset.
for Hard Reset a BA just press RECORD+CAMERA/PLAYER+SOFT RESET 2 sec. and walaahhh.... there you go.., You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
have a nice reset
Click to expand...
Click to collapse
Thank you soooo much Stevo... Ur method worked... I wonder why the wiki itself has the wrong method for hard reset... Maybe the hard reset varies from brand to brand... although it should not be since the hardware essentially is the same... Anyways... Hopefully one of the moderators would read this thread and add your method to the wiki...
Million thanks again...
I get that 3 choice screen, but how to I get it to hard-reset AFTER that? If I hit the soft-reset I get the same thing I have gotten for the whole day before. :-(
on the screen must be shown
enable kitl :choose no
clear registry hive : choose yes
format storage : choose yes
change it using the record and camera button.. after that use the mail button to proceed the hard reset
evoluzionne said:
on the screen must be shown
enable kitl :choose no
clear registry hive : choose yes
format storage : choose yes
change it using the record and camera button.. after that use the mail button to proceed the hard reset
Click to expand...
Click to collapse
tried the above but unable to press enter using mail button to initiate rebootin. pls help
Procedure works as advertised
I also was scratching my head over the Hard Reset info in the Wiki not working. This procedure did the trick. Thanks for the help!
Also, for the poster who had trouble with the Mail button not initiating a reboot, just hold it until you get an all white screen, that's what I did and it worked like a charm!
Hard Reset Big Thank Q
Hi every1, the step does work & i would like to thks those who has shared there thought with all.
juz press the "mail" button for about 3 miniutes & you shud see a totally white blankscreen & then it will bring you to formatted WM6. whatever u install previously will be wipe out.
After i hv tried various method.Honestly, this is the only method work to overcome "EXTREME FROZED WM6".
Thks to XDA developer community for sharing.
Just curious, any1 know wat mig hv cause the "EXTREME FROZED WM6"?
Have a nice day every1.
RGds
Thks mysteroid,
For making me holdin on to d "Mail" button. It really works. Brilliant.
Have a nice day.
Consolidated Solution
To the next member whois searchin for a solution here it is:
Problem:My O2 XDAiis won't hard reset. WM6 deep FROZED.
Solution: Extreme Hard Reset a XDAiis just press RECORD+CAMERA+SOFT RESET 2 sec. and walaahhh.... there you go.., You'll see three options on screen. Then use RECORD+CAMERA/PLAYER button to change the value on the setting.
Setting: on the screen must shown
enable kitl :choose no
clear registry hive : choose yes
format storage : choose yes
Finally: use the mail button(act as enter) to proceed the hard reset. U might need to press & hold it for 3minutes.
Kudos to original contributor :Stevo.Mksr(for method) , evoluzionne(for setting) & mysteroid(for keepin the faith).
WM6 deep FROZED -> check/replace your battery
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
i have the same problem
is there anybody for help???
SOS please
Eenigmaa said:
Does anybody know if there is a way to boot N560 using SD card? I think I killed my FS with some "rom killer" and all I get now is FS boot screen, no other activities.
Any way to start it from SD card and flash it from there?
Perhaps any other way to bring it back to life?
Click to expand...
Click to collapse
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
fingerstoo said:
You cannot burn the ROM from an SD card.
If the device has had the anti-theft password set at some stage then you cannot reburn the ROM! This might be the problem?
A hard reset on the N560 followed by running the Loox burn program on a PC with ActiveSync connection to the N560 cradle is the only answer i.e. a normal ROM burn.
Click to expand...
Click to collapse
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Eenigmaa said:
Theft protection is not a problem here. It was wrong ROM and now it is stuck on boot screen, active sync does not see it at all, maybe there is a trick to somehow anable burn, flash, service mode on it? So far nothing helps....
Click to expand...
Click to collapse
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
vladtapes said:
read, and pay attention here:
[email protected]@p://a.mod-site.net/gb/u/newplow-1.html
POST 203.
Edit/Delete Message
Click to expand...
Click to collapse
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA.
Click to expand...
Click to collapse
Eenigmaa said:
GREAT!!!!
Thanks ever so much! You are real HELP!!!!
Click to expand...
Click to collapse
do you confirm the method is fully functional?
I made a backup of my german original rom, if i have problems i want to restore it...
have you got a backup of your old wm5?
thanks
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Eenigmaa said:
Yes it is working! Even if error comes at the end, shut the appie and use FS update tool to finish it up! All perfect!
Google for WM5, it is somwhere out there!
Click to expand...
Click to collapse
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
vladtapes said:
could you please p.m. to me the link of wm5 other language?
If you refer 4pda...it can't be downloaded, i don't know russian, i registered, but always cannot download...
if you have other link...pls send me...
Click to expand...
Click to collapse
You can if you use an translator like www.windowslivetranslator.com or translate.google.com
then it is pretty easy.
I've resolved...
Fully functional WM6.0 newplowe in English...
now I'm searching for editing it in Italian/French but I need to edit the rom part of the XIP (just that).
For doing that, I need to open decrypt the file .nbh file (don't really know howto, and newplow doesn't answer about that... ).
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
rcretu said:
Hi everybody, I need your help. I spent 2 hours to read several posts about N560 brick recover, and I still can't figure how to do it.
I flashed the N560 with the WM 6.1 and then I tried to flash the backup Rom Image ... which failed. Now is stucked in the climbing image ... and is not reacting to nothing. I didn't try the mitty sol because I don't have a clear ideea about using it, I am still a newbie ...
Please, I am begging for help if you can , thanks
Click to expand...
Click to collapse
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
N560 - still stucked in the climbers bagground after WM 6.1 flash
fingerstoo said:
Try this?
Take the N560 off the cradle. Remove the battery for at least 30 seconds. Reinsert battery and back cover. Do not worry if the screen shows the dolphins again. Do a full hard reset to get back to factory setting i.e Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume button and the Calendar application button for a few seconds. The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further instructions on the display.
A hard reset should put the device back to the existing (last burned ROM) and you can try the burn again again.
You probably do not know why the burn originally failed. The most common reason is some interrupt of the processor (internet access, switch of all internet access) but more likely something is polling the USB port, which might be shared in the PC. My external USB TV tuner constantly polls the USB port and interrupts any transfers on other ports! I suggest that you disconnect all other USB devices and make sure that your N560 cradle is connected to a USB port directly on the motherboard of the PC (not a USB hub or expansion card with multiple USB ports).
Hope this helps.
Click to expand...
Click to collapse
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
rcretu said:
Hi and thanks a lot for your post ... I tried several times this procedure ... I see no change for the hard reset .. No dolphins image at all ... I would say whatever I do it doesn't affect it. No sound, no other signs ... same climbing image.... Please keep remember other solution, It should be one ... thank you again ...
Click to expand...
Click to collapse
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
rcretu said:
THANKS FOR HELP, I didn't made correctly the the procedure ... now all it's Fine ... really appreciate your help ... saved my precious loox ...
Click to expand...
Click to collapse
PHEW! Thank goodness. I suspect you did not do the hard reset correctly at first. But I agree about the Loox being precious! I look after mine very carefully! Glad I could help you. My pleasure....
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
vladtapes said:
My fs560 is brikked!!!!
It remains to climbing people...
I can enter to bootloader (dolphins) but i cannot update to Windows mobile 6.1 Classic ver. 063.07
I need your HELP!!
I tried to use mtty and i can arrive to:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0236002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
but then I cannot initialize normal update, it remains to dolphins with the blue bar fullfilled by precedent mtty...
the PocketLOOXN560FlashTool.exe can't find the device...
Can someone explain me the CORRECT method after mtty?
PLEASEE!!!
Click to expand...
Click to collapse
I think you have received a reply from Newplow on his guestbook....
Hi
I tried to upgrade to 128mb but after restart I see only climbing. I tried everything here but on dolphins afterr line is blue it is finished. that I am unpluging device. starting looxflastool for 560 and first is trying to connect by active sync and that when no connection made I see dolphins on left screen of flash tool window. than I am pluging again and after couple secs I see that: Error"The language in this Flash Image update (ENGLISH) differs from that on your device. I tried to change rom on every language but not working as well. PLEASE HELP!!
if that helps than i will add than on top when delfins i see on 560 is two lines. first is typed 2.14.G4 on second directly below is 2.15.
and when mtty 1.42 finishing flashing i see following:
Image Download Finish
OEMFlashWrite(A0000000h,8C200000h,0224002Ah)
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I've done already procedure You've mentioned here with taking of the battery for at least 30 secs with hard reset afterwards but it is still climibing screen. Can U manage this as well???
THX
The most common error with the procedure is NOT making a proper or true hard reset, or back to factory settings reset. If you do it wrong, you will only achieve a soft reset, the same as you get if you just put the stylus in the reset hole in the base of the N560.
The correct procedure is to hold Power/Resume/Suspend button (on/off button) and the Calendar button simultaneously. Keep holding them and with the other hand press in the reset hole with the stylus. The screen should blank out. KEEP holding the other two buttons all this time, and release the stylus. KEEP holding those two buttons until the screen display returns, only then release them.
This should allow another burn.
I hope this is the problem. It has happened to me and others, so I think I am right. But if this fails, you may need another approach.
Hello,
My HTC 3300 is blocked on Windows start screen.
I have hard reboot my device and un screen with 3 color appear.
When i plug my device with USB cable, my computer play a song to inform my device is well connected.
But when i launch Artemis USPL, a popup appear with the message : "No Device Connected : Would you like to try copying again ?" Yes, No, Cancel.
I'm blocked a this step.
Can you help me ?
Thx
PS: Sorry for my bad english. I'm french guy.
hi guys,
i have the same problem....
I was trying for the first time to upgrade my Artemis!!! I DIDN'T DO THAT!!!!
Please help me!
TNH
USPL only work if you are in WM. It doesn't work at the booloader.
Zecanilis said:
USPL only work if you are in WM. It doesn't work at the booloader.
Click to expand...
Click to collapse
yes... i know
i am reading.... i am looking for a solution.
I read on the POF USPL guide that probably (Unfortunately ) this problem should be caused by same PDAmobiz tool!!!!
i am being funny!!!
yet another bricked artemis owner
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
zikizile said:
Hi…
Newbie as I am I’ll try to explain to you what you should do...I’ve bricked mine artemis()but I think it is more related to hardware issue. You should try this:
1. Download mtty
2. Disable usb in active sync
3. Bring your Artemis to boot loader(pres start record +start phone+ reset)
4. Start mtty, choose usb and you’ll get popup up screen with direct access to your device.
5. Type this in command line of mtty (NOTE-YOU MYST TYPE IT/NO COPY PASTE WORKS)
Password BsaD5SeoA
6. You’ll get %indicator bar on your phone and then you can switch off mtty(do not disconnect your phone!!!)
7. Just start your ROM upgrade (it has to be factory rom if your phone is locked) and you should be ok.
(You need to have downloaded your original factory rom...For me it was O2 UK...do not start until you have it all)
If it fails, or you get some error massages, repeat all from point 2. Or follow on screen instructions...recovery etc...
If it fails,repeat,repeat,repeat....
Hope it will help you and save you from reading s... load of threads!!
P.S.
I’m still trying to bring mine to life….
Click to expand...
Click to collapse
It solved my problem: I've played around with some dll's on my Artemis and it won't boot anymore.
Just one thing: you must type password BsaD5SeoA, cause it's case sensitive.
THANK YOU VERY MUCH!!!
Hi guys,
i fixed my problem!!!!!
i flashed an official ROM (1.12.405) using a SD card (512mb)
now i'm going to work with ARTEMIS_USPL!!!! WOOOOWWWW
owner of a brick called artemis
glad it helped you solve problem...
when I was young I use to poke with programming...
but that was looooong time ago (remember zx spectrum?48 kb ram..haha)now you got it in your pocket(working if you're lucky guy, not like me)
Any way, point is:
never give up!!!!
Yes, I agree with you: NEVER GIVE UP!!!!
I'd like to help you, i'm not expert people on this work...
I just read a lot of good indications on this forum.
Good Luck
Thanks man,
I'm trying to find another motherboard,before I start playing with this one.
Maybe you know where to get one for artemis?(arte 200)Or someone with broken screen not willing to repair it?
cheers,
z