Hi, I have a big Problem with my Diamond
I can't boot the Diamond, only in bootloader
Does anybody has an idea how to change the SPL or the ROM ?
Or is there a possibilty to get Jumpspl on my device (i can't access windows)
Thank You for your help, I really appreciate it.
Hi,
I have sort of the same problem, except I have a US DIAM110. If you have found the original stock ROM for your device, try that. It has to work; JumpSPL only works from Windows.
~codeslicer
try using mtty it work for me- diamond 100
and try another usb in ur pc and flash olinex 1.93 again
Flash via RUU, hrad reset, if still in bootloader, Mtty task 8
......
Thank You!!!
bummer
have you tried using a custom RUU to install your stock rom?
extract the stock rom from official RUU and use the custom RUUs that can be found here.
one more thing, you might want to grab the old drivers for mobile device sync and make sure the old drivers are loaded. vista and w7 usually rollback the drivers.
might not work, but worth a shot eh...
hey i had the same problem i tried evrything and it didnt work just like you so i went to htc service center and the flashed my rom back to the box rom check out if there is an htc service centre near you.
Thank You....!!!
Try, with mtty:
Code:
Task 29
Task 8
then remove the device, enter bootloader, and try flashing. Maybe, post to us the output of
Code:
info 0
info 1
info 2
... info 8
etc up to info 10 I think
You can also try pmming Olipro or cmonex, or try looking around on how to do a CID unlock (imei-check or something like that does it, but it's been reverse engineered by now).
Finally, if you're about ready to give up, you can run "task 2A" which FORMATS EVERYTHING. You could be left with a brick. But there's a chance your SPL will be saved and whatever's causing the problem to be removed. Again, I don't recommend it; it's a very powerful command.
Best of luck.
~codeslicer
Thanks codeslicer...
Thanks......
Have the same Problem
i`m also from germany:
Diam300
SPL-193 OliNex
There seems to be a problem with the HSPL?
i tried to flash another H-SPL, but it jups from 0% direktly to 100% and restarts?!
There seems to be a problem?!
codeslicer said:
Try, with mtty:
Code:
Task 29
Task 8
Finally, if you're about ready to give up, you can run "task 2A" which FORMATS EVERYTHING. You could be left with a brick. But there's a chance your SPL will be saved and whatever's causing the problem to be removed. Again, I don't recommend it; it's a very powerful command.
Best of luck.
~codeslicer
Click to expand...
Click to collapse
excuse me...what does it mean "FORMATS EVERYTHING"???
after "task 2A" the first thing to do will be flashin hardspl and then a ROM ???
ok, it is possible to flash roms and radios... but it is impossible to flash any spl!
so whats wrong?
/edit: is it possible to flash SPL on another way? in some "do whatever it says"-way?
the fact that i previously installed XANDROID has nothing to do with the problem,does it?
Bumpt to Top.
Noone an idea?
Can anybody do a checksum with mtty, who has also olinex 1.93 an post the result? i want to check SPL etc. CRC Checksum.
THX!
Still the question: what does the Task 2a on the diamond!?
ok, those who are currios: task 2a doesn´t work neither.... :-/
Lord,
Hard-SPL is protected, which is why it is called "Hard". It is written in "hard" on the memory to prevent it from accidentally being erased. Therefore the memory where Hard-SPL itself resides is protected so a bad flash won't brick your device.
In order to modify the bootloader (in your case it's Hard-SPL at the moment), you have to use Soft-SPL, which "softly" remains in the memory, but is not actually "written" in the memory. To do that, you get something called Jump-SPL. Find it, and execute the .bat program when your device is connected via ActiveSync. Accept the prompt on your device, and the screen will turn black. Now flash the new SPL (bootloader) that you want to install. If you mess up here you can brick your device, but installation is fast.
~codeslicer
Also, when you use mtty, you cannot copy and paste. The program only works when you TYPE it in. So do be careful with Task 2A and do not resort to these tactics unless your device has been fully bricked.
~codeslicer
Related
I was becoming an expert in flashing...but the cable became undone during a flash :-(
Now it restarts to a blank screen with R1.50.08.11 / G32.83.7020 etc. but goes no further.
Computer no longer sees device.
Used hard keys to go into bootlocker. (IPL 0.50 / SPL- 1.07.000)
My VISTA :-( computer sees device.
Then try RUU, but this gives a 270 error.
Tried moving to XP, but the computer does not install the software for the USB port, so now the RUU gives 200 error. Arrgh.
Question: How to update from a very corrupted ROM? Or where can I find the drivers for the USB port, for XP. and if I do can I do the update from the hard bootlocker?
Any help really appreciated!
MS
Update
Found USB drivers for Windows XP
But getting identical problem as with Vista :-(
Device not seen unless in bootlocker mode.
RUU starts and after 1% quits with 270 error - image file corrupt.
Tried RUU a hard SPL (olipro) but same 270 error occured.
Help still needed...
MS
I think you have to flash original HTC rom prio to try other roms
i got a similar problem here, my vista can find trinity only when it is in bootloader mode.
my experience is that connect tinity to vista when it is in bootlader mode, then i can flash a new rom.
after that tinity can sync with vista only via bluetooth.
for your case, maybe you really need restore your trinity to official rom first.
sailer1983 said:
i got a similar problem here, my vista can find trinity only when it is in bootloader mode.
my experience is that connect tinity to vista when it is in bootlader mode, then i can flash a new rom.
after that tinity can sync with vista only via bluetooth.
for your case, maybe you really need restore your trinity to official rom first.
Click to expand...
Click to collapse
Maybe helps:
http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66
The trinity upgrade guide does not help here.
I can connect to device I have sorted out all the VISTA and XP issues.
The problem is at 1% status the 270 error occurs.
The telephone is actuall a Swisscom 1510. Original ROM was lost in first flashing, have searched but not found official update.
Is there a mini-ROM or a windows WM5 lite ROM which may overwrite what happens while still using the hard bootloader?
MS
Use SD card method.
See wiki page.
Bye
Hi,
...or .... MTTY Procedure....
BYE, Bobo
Tried SD card method - nothing happens. Just sits in Bootloader :-(
Try this procedure
In windows Vista use the attached driver in order to recognize your Device.
If your device is already recognized from windows vista replace the drivers with the drivers in the zip drive.
You have to use the drivers in the attached file not the windows default drivers VERY IMPORTANT!!!
After your Windows vista recognized your device try to flash it
Cheers
Thanks for all the help....but still I am having no success.
The HTC trinity is recognised in both Vista and XP when I use bootloader. (ie HTC USB SYNCH in device manager. Without boot loader the device is more or less dead.
I tried the SD crard trick - nothing happens.
Tried mtty.exe - just get cannot open USB port (on both VISTA and XP).
Nevertheless, the bootloader sees the USB port and the RUU goes to 1% then stops so some communication is happening.
Any other ideas?
MS
The final and, j' m sure, the definitive solution:
Try this one http://forum.xda-developers.com/showthread.php?t=308691&highlight=stack+in+bootloader
Just before I try splxploit, as a note I got this out of mtty
Cmd>info 8
Block 0x0(0) is Reversed block
...
Block 0xC(12) is Reversed block
Block 0x335(821) is BAD block !!!
Seems my problem must be here. Is there another fix besides splxploit?
MS
Install Olipro hardspl 1.20.
Bye
Dear, carefully look that thread again. Stack overflow for Trinity.
It's all my advise. I think you don't do right "Stack method" to get out your problem.
Best regard.(rest calm and do it again).
Uhm, try to download some rom again? and try Rom NVID (no vendor ID) for example. ???
Quick update...
Tried SD card - get 00068002 loading .... then goes to IPL0.5 SPL 1.07
mtty info 8 shows bad blocks
task 2a doesn't clear bad blocks because of CID lock
Tried various hard-SPL OLIPRO 1.2 1.3 etc, to unlock CID - to no avail.
Can the CID not be unlocked through mtty?
MS
ManStan said:
Quick update...
Tried SD card - get 00068002 loading .... then goes to IPL0.5 SPL 1.07
mtty info 8 shows bad blocks
task 2a doesn't clear bad blocks because of CID lock
Tried various hard-SPL OLIPRO 1.2 1.3 etc, to unlock CID - to no avail.
Can the CID not be unlocked through mtty?
MS
Click to expand...
Click to collapse
So you haven't yet tried splxploit?
END of STORY
YESSS!
POF you are a genius - Splxpoilt worked a dream.
Had to run unbrick.bat once. Hit soft reset, and run again as explained in the readme.
This got a good SPL on the machine - then a standard RUU worked a dream.
At the same time I got the SD card update working too...
OK, OK, so I should have tried splxpoit earlier. But I think I had to do the rest first to understand what was going on.
Strange thing is if I look at my machine again under mtty, there is still the Bad block (821). Who cares, I am unbricked!!!
By the way, this board is just completely amazing.
THANKS TO ALL....
i have the same problem
could you help me . how did you repair your spv?
As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!
Hello,
I've got an touch diamond with hard spl and windows mobile 6,5... but today my touch screen doesn't react on touching anymore so I need to send it for warranty. I had an backup of my original spl but I lost it installing windows 7...Now I need an original spl for my vodafone phone... Maybe someone can help me with this(I'm from holland don't know if that matters for the version of the spl...)
already many thanks...
Erick
Try searching on the Vodafone website for a Rom for your device, if you are able to find it then flash it, it will install the rom and radio, but the SPL will remain HardSPL. As the final step when you have your stock rom flashed is the SPL flashing, the SPL can be extracted from the Vodafone rom package with "nbh extract"... when you will have it follow the steps in the HardSPL thread where you can find the way to flash the original SPL...
Allright, I installed a new firmware from the internal storage because my touch screen doesn't work... now the only thing i need is the original bootlader. I tried nbh extract but it doesn't work on my windows? (windows 7) here is the link to my original rom http://www.vodafone.nl/Vodafone/wg2...igned_Diamond_52.44.25.24_1.08.25.08_Ship.exe
maybe someone can help me how to install the bootloader...(again I have no touchscreen anymore
regards and thanks already
heres how i envisage doing it.
you need to run jumpspl on your phone. I guess you can still run an OS and execute apps using the navi pad and action key.
if you have done the jumspl correctly your screen will rurn blank connect your phone to your PC and then you can flsh the original spl back!
i attach the jumpspl with instructions as well as the SPL.nb file extracted from the ROM which you posted the link to.
i did not recreate it as an nbh file as i do not know what model ID, country ID,Version and language your phone, is may be some one else can tell you! or if you tell me can build a flashable nbh for you!
i ask can some one else to please verify this procedure first, before you attempt doing it!
Well great thanks for the help but maybe you can make a flash file for me...the next thing is the problem, windows is installed and when you want to start windows you will need to tap te screen to run the standard procedure to allign the screen and set the date...I can't do this without touch and so i can't load any apllications how do i find the info that you need?regards
Can anyone tell me where to find:
ID, country ID,Version of my HTC touch Diamond??(without touch screen)
regards
alrright the next things i've found hope that it helps for creating a nbh file for my spl instead of the hardspl...
Country - The Netherlands
Dutch Language
Rom1.93
DIAM100
FCDID:NM8DMS
ok ive done it with the info you gave but i also used some of the generic info like Moel ID= Diam**** .... etc
the nbh is built but you should get confirmation off some one else before you proceed! i take no responsibility ! hope this helps
can somebody check/confirm this? Already many thanks! regards Erick
allright i installed it but it doesn't work still have got olinex spl...at this moment active sync is working maybe someone can help me out now?
regards
it wont work until you run jump sl properly! jump spl overides the write restrictions on the spl!
if you run jump sply correctly the screen will go blank as soon as you execute it!
then connect you usb cable and flash! (whilstthe screen is blank)
already thanks for the great help, JUMPSPL is running! now i try to install the rom with customruu and then copy the nhb you made for me in the same directory..only it still stays on olinex
CustumRUU says it is installed correctly and that it's finished...I think Jump SPL isnt working like it should, the screen is not turning black but it says that i can install the spl...I think the problem is that i can't alling the screen and windows is not fully loaded yet..?
regards
mmm, the problem is jum spl alright! im sorry i dont have a solution for you may be some one else can help! try searching i quiet sure i have read similar problems elswhere!
yeah the problems are there enough but no sollutions to it...I need the following thing...In the startup folder of windows mobile there is the welcome screen, i wan't to delete it so maybe i can go throug loading windows and then i maybe can load the jump spl...just to skip the allignment of the screen...but when i want to delete the files it says that i've got no autohority, also not with total commander, maybe someone knows anything to delete the files with active sync..?
regards and many thanks already to idristo
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
blanktruth said:
Ok, first of all I did not think that it was this dangerous to use MTTY!.
I followed everything and came to these lines
---------------------
Cmd>task 8
Cmd>
---------------------
But after Cmd>task 8 my device restarted immediately before the second line Cmd> appears and I panicked and disconnected my device and pushed the wrong buttons while "Touch Diamond" logo was on the screen.
Now, nothing happens. I can not start from the beginning because I can not start the bootloader by pushing Vol Down and the small red reset button...
Is there anything else left for me to try? Or should I throw my HTC to garbage?
Click to expand...
Click to collapse
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
i have the same probnlem!! with my diam300
my bootloader show not Diam300 64m but only 64M on the first position in 3color mode... plz help
Connect the Diamond and run the customruu.exe from your desktop, this should work.
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....
blanktruth said:
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
Click to expand...
Click to collapse
The only thing to do now is to flash back a stock ROM or use a custom ROM with the RUU.
Solved!...
Dom1n8tr1x said:
First of, your device is supposed to soft-reset after the "task 8" command and you should have been holding down the "Volume Down" and "Back Buttons" to begin flashing your new ROM. The whole idea of using MTTY is to format your Main Storage and flash a new ROM. Therefor you should have loaded the ROM that you wanted to flash onto your Internal Storage.
Click to expand...
Click to collapse
Thank you for your reply.
Actually I had uploaded the ROM to my internal storage, but during trying to bring my phone to bootloader mode, I formatted the internal storage...
Anyway, what I did now is, first I opened the USB Connection feature from ActiveSync, and then used CustomRUU.exe to Flash the ROM...
Everything is solved now...
Thank you very much all...
ilijan said:
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....[/QUOT
bootloader is all you need to revive the phone
connect it to usb in bootloader mode and just install an oficial diamond rom from an windows xp pc.
it's easy
Click to expand...
Click to collapse
plz write here step by step guide how you solved
How it was solved...
ilijan said:
plz write here step by step guide how you solved
Click to expand...
Click to collapse
Actually the most crucial part was to bringing phone to boot loader mode. And I think I managed that by pushing the Volume Down and Back (the arrow pointing left) buttons immediately after restarting my phone. And I had to do this after taking out the battery and putting it back after 5 sec.
When I pushed these buttons at the start up the phone tried to install the ROM from my internal storage, but as I explained I had deleted it by mistake. Therefore it could not find the ROM. I disconnected my phone from my PC and the screen started to say something like Retrying USB connection or waiting for USB connection, something like that.
I restarted my PC in Digitally Signed feature disabled by pressing F8 during start-up. Reconnected my phone to PC (the screen of the phone was still blinking as waiting or retrying usb connection). And voila the phone screen changed to boot loader mode...
The rest was easy. I opened the USB connection feature from ActiveSync and used CustomRUU.exe with a ROM to flash my phone...
That is all...
1. plug phone in to computer in bootloader
2. run customruu or stock from rom update on computer
3. wait for rom to flash to device
4.???
5.profit
but my booloader dont show model ID: DIAM300 64M what i had befor
and show me only: 64M
and any flash error with invalid model id, i canot flash, rom, stock rom, or hardspl...
understand me.. im not totaly noob... i used mtty X times... but now have this probles
can somebody help me?
my diamond dont have model id...
before i had in bootloader mode DIAM300 64M model id, but now i havent got... its show only 64M,
every rom flash stopped at 1% cose model id error,
every hard spl falsh finished 100% but after flash when device restart write model id error...
i cant do anithing... can somebody help me?
For everyone facing problems after flashing his/her device, take a look at the link in my sig.
There you can find a guide to restore your diamond.
you dont understand me..
i canto flash any rom any hard spl becous my diamond dont have device ID...
in bootloader dont show DIAM300 64M but only 64M
after all flash say error mobile ID...
i try mtty, hard reseted, soft... and nothing
after start its show me only first stock screan, the red text on the right bottom sight dont start: 1.17.25.14
2.100000
geny d2x
its maybe wrong but i forgot what waz here...
how can change device model ID? form 64M back to my stock DIAM300 64M?
Try another version of Hard-SPL, some people report that 1.40 not fully works.
I suggest you try 1.94 Olinex.
my diamond is death... if somebody know how can heal it... plz write me...
my device ID is missing... so i cant flash any rom, any hard spl, any radio...
try this? http://forum.xda-developers.com/showthread.php?t=409425&highlight=invalid+model+id
im not sure but i dont think one can brick his/her phone after hard spl, thats the reason of hard spl in the first place that u dont brick it. boot loader is always present
Guide
if you are using Windows XP try the following steps:
Connect your device to your PC
In Active Sync > connection settings > check Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.
Guide
if you are using Windows XP try the following steps:
Connect your device to your PCIn Active Sync > connection settings > check
Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.
Thanks to gruptnt over at this thread: http://forum.xda-developers.com/showthread.php?t=490681
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.
my wifi work great again
That is perfect solution !!!
thank !!!
complimenti....
penso proprio che questo tread sia
sticky
eng: sticky for ever
binht611 said:
my wifi work great again
That is perfect solution !!!
thank !!!
Click to expand...
Click to collapse
I also have the same problem... i visit the above post but the post is very big... can you please tell me what steps you follow....
Thank you.... i also have trinity and after this error my trinity hangs frequently.....
These two posts should help:
http://forum.xda-developers.com/showpost.php?p=5313622&postcount=340
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345
WLAN IS NOW FIXED!!!!!! Flash without worry anymore.[/QUOTE]
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
vito95 said:
Dear Supersport....
thanks for update...
but after the complete procedure (all report was ok), the phone dont restart.
i can see the rom number...etc etc, but remain the htc logo on the black screen.
How can resolve this ?
Thanks a lot for your help.
Vito95
Click to expand...
Click to collapse
Have you tried to flash another ROM to the phone and see if that gets it going again?
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
kabtv said:
First of all thanks to you SuperSport and GRUPTNT for this
But for me, unfortunately, it doesn't works, i'm unable, when running Mtty116, to get the USB connection. I got Vista and i think it's the problem.
If somebody got an idea about it...
Click to expand...
Click to collapse
yes, confirmed, you must XP
SuperSport said:
Have you tried to flash another ROM to the phone and see if that gets it going again?
Click to expand...
Click to collapse
Hi, after some hours the phone is restarted.
Now the only problem is that in comm manger application, Wlan dont work.
remain in off state (red botton).
can you help me?
regards
narshorn said:
yes, confirmed, you must XP
Click to expand...
Click to collapse
Please see this update.
Now, you can run MTTY in Windows Vista and Windows 7. I've made a Video Tutorial Showing how. It's Step 2b on this page:
http://forum.xda-developers.com/showpost.php?p=5314726&postcount=345
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
kabtv said:
my god, you worked late yesterday on this...
thanks for this and everything else, but again, i think that nothing is going to be easy for me...first, if i disconnect USB from mobile center, it's not in the computer management anymore...so i can't change the driver...next if i reconnect the USB connection, i can find it in the device manager but i can't change the driver because:
On my Vista home premium(32 bits operating system) : ''The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for 32-bit systems.
and on my Win7(X64 Home Premium): it's the same message except for X64
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the splash screen
Click to expand...
Click to collapse
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
I don't believe this will work on 64bit Windows. I tried and stopped after a couple failures.
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Looking at the Video again this morning, it does appear to go sort of fast. Hit Pause when needed to read the text pop-ups.
Next thing is I believe you may be selecting the wrong option when you browse for the driver. Be sure you are selecting the option: "Let me pick from a list of device drivers on my computer". If you get a warning that the driver is not the correct driver, BUT you have the option to go ahead with the installation, go ahead and install it. It's a Windows XP Driver, so Win7 will not suggest installing it. But when it's all over, you will be removing it again and reinstalling the Win7 Driver.
SuperSport said:
Ok, I think I forgot to mention one step. Before you disconnect WMDC, be sure your phone is in Bootloader Tri-Color Screen Mode. (Also, before flashing any ROM, be sure to be in Bootloader Tri-Color Screen Mode. [Power/Camera/Reset]) Your Computer will Still be able to see the Phone in Device Manager after WMDC is Disabled.
Click to expand...
Click to collapse
That was it...i succeed to install the driver and WIFi works again
SuperSport said:
I'm sorry your WLAN is not working still. That's not good and we will do our best to get you back to WiFi.
Click to expand...
Click to collapse
don't be, you do so much for the community here
Thanks again...
kabtv said:
That was it...i succeed to install the driver and WIFi works again
don't be, you do so much for the community here
Thanks again...
Click to expand...
Click to collapse
That was FAST , good work! Happy to hear it worked for you.
Also, be sure to delete the XP driver from Device Manager, and re-scan the system to install the original driver. And then, re-activate your USB Connection in WMDC.
kabtv said:
my god, you worked late yesterday on this...
BTW, it's not the first time that i tried to flash EOM from your signature and i can't go all the way to the process...don't know why, it did stop before the end...but i got the 3G Asia splash screen
Click to expand...
Click to collapse
did you experience that...?
kabtv said:
did you experience that...?
Click to expand...
Click to collapse
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
SuperSport said:
Did you use SSPL_TRIN.exe to enter Bootloader Mode before flashing? I think that is necessary for a full flash of OEM.
Click to expand...
Click to collapse
i used the sd card method...
kabtv said:
i used the sd card method...
Click to expand...
Click to collapse
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
SuperSport said:
You would still need to use SSPL_TRIN.exe to put the phone into a special Bootloader Mode because the OEM ROMs overwrite the HardSPL on your phone. This special mode allows that to happen.
Copy SSPL_TRIN.exe & your TRINIMG.nbh to your phone's SD Card Root. From your phone's File Explorer program, browse to your SD Card and tap SSPL_TRIN.exe to run it. If asked, go ahead and say "Yes". This will enter a special Bootloader from which you can flash the OEM's.
Only use this method to flash Back to OEM ROMs and NOT for Normal Flashing. You want to use the HardSPL's Bootloader to flash Cooked ROMs to protect your phone.
Download SSPL_TRIN.exe
And, remember, after flashing an OEM ROM, be sure to flash a HardSPL back on your phone BEFORE Flashing Custom ROMs again.
Sorry everyone for getting off topic. kabtv, if you need more help with this, PM me, I'd be happy to help.
Click to expand...
Click to collapse
Hi,
I have moved to hd, so I didn't come to this forum since then...
I will try to explain a little better the HSPL and official roms.
First, there are several HSPL for trinity. The best one is olipro 1.30, so this th eone we want to get into the trinity.
First the theory, in a .nbh file we have several parts: ipl,radio,spl,splash,os,extrom In an official rom contains all parts, a custom ROM normaly nowdays contains os only. Whith older kitchens contains splash+os
The HSPL of olipro is protected so it is not overwrited by the roms. So it is safer, and you can't get a brick if you don't flash the ipl part.
The SPL is the tricolor program, so when flashing you should view the spl that you have in the trinity.
Whith the customruu of the trinity there is a file called enterbootloader.exe which is transmited to the pda and executed to display the spl. This file is SSPL_TRIN.exe renamed.
Ok, so this are the scenarios:
1) you launch the romupdate whith as/wmdc connected:
Enterbootloader is transmited and executed -> Special SPL 1.07
So when flashing you will flash every part of the nbh (all for oficial, os for custom)
2) you enter manually in boot loader
The SPL in your device -> olipro 1.30
So when flashing you will flash only (ipl,splash,os,ext)
The safer method is to put manually the bootloader mode and flash. You can have the HSPL whith an offical ROM whithout worries. Though there is an exception: you want to update the radio.
If you want to update the radio use method one so you run the other SPL.