i have a big problem with my htc diamond,after rom update the scean was black and i did not syncro with my pc, i have error 260, i test hard reset and soft reset, noting, can you help me please
re-flash without sync ???
dont work after many test , hard reset and soft reset , please help my htc is dead
try to press vol down and reset
try to press vol down and reset key at same time for 5 second it will enable usb mode then you can flash it.
or try to flash from internal storage
after many test my htc is dead dead, hard reset and soft reset don't work, motherboard i tink is dead
try mtty format utility... maybe u have some bad block
Does your phone go into Bootloader mode??
If it does...try a different ROM.. or else i would suggest Service centre.
Related
hello,
my xda2s is stuck in serial mode please can someone tell me how to get it out of serial mode?
Thank you.
I assumed you tried the soft reset hole and the hard reset (wipe out all data) mode (with power button held down)?
Yeah mine is stuck in the serial mode also. I have tried several different ways to reset it and in won't reset. I don't know if I'm doing it right or not, but I tried to do it by holding down the power and the soft reset button. Then I tried to hold down the camera, record, power, and soft reset buttons and it won't do it.
Please help me also to get it out of the serial mode
Thanks
I don't know if this will help. But I kinda face the similar problem.
My device also stuck in the serial mode while upgrading to the 1.08 Radio ROM.
It was switched to the serial mode by the upgarde software while checking the device ROM. Then it just stuck there forever.
Soft-reset and Hard-reset won't bail me out off the serial mode. And the upgrade software also got stucked on my PC.
What I did was to reboot my PC, replug my XDA IIs back to the craddle (while still in the serial mode) and reflash the ROM again. The second time was a success. The ROM upgrade was smooth and the device was able to get out off the serial mode after a soft reset.
-SJ
I have tried to unlock the ext rom by changing the registry asdescribed in the forum, the result was a white screen tried a hard reset but the result became worser, a dead ppc with a black screen, only when I keep puching on the power button a red green light start flashing. I have tried every possible issue hard, soft reset. Tried to bootload from the sd card without a possible solution, can anybody help me out here, thanks
i guess there is only one option left, flash your device again
I have tried to flash again without succes, the flashing can happen only when there is a usb connection, the driver was not found and the ppc still dead.
bootloader mode!
Beny said:
I have tried to flash again without succes, the flashing can happen only when there is a usb connection, the driver was not found and the ppc still dead.
Click to expand...
Click to collapse
You need to put your fone into bootloader...try the wiki...
I had those 2 HTC diamond to unlock... I tried solution posted in this forum: with first phone all went wright and I manage to unlock it after some trys on step 3... the second phone crash on step 2.. now it does'nt turn ON, and can't enter BOOT MODE (tricolor mode), and battery is ok!
Please help me recover this phone!
Same problem. Diamond totaly dead during flashing. Any chance to turn on for reflashing? Nothing like hard reset or removing batery working.
same thing here!
any solution to repair dead diamond !!?
any news to repair this phone
Sorry guys, On a lighter note, if anyone who has a dead US Diamond wants to sell their housing, especially the back cover please let me know.
do it..........
ok first there is not dead diamond put your battery in phone and connect with pc download rom update or flasher or some hard spl fixers and instal it on your device
because when is there tricolor at the bottom of the screen when device is not conected there is word SERIAL, and if you connect there is word USB so do not crash your self just be patient.........
how to solve pb diamond can't be enter in boot mode even reconised by pc
after unlock using cdma unlocker
any news on this?? My diamond it dead as well and need it for work. Please help some one must know what to do. I can't even connect to my pc
Contact this man by Skype- elco_nsdongle. He repairs dead Omnias. If you'll find diamond shematics I think he'll be able to help you.
Any solution about dead diamond? ?
Hi I was try to to flash some cooked ROM and my Diamond tells that is incorect Image. Then restart and start to bootloader. So i try to send another Rom but after restart its freeze on "HTC Diamond" screen. Ill try Hard reset many times with no result.
After thay I tryed to turn Diamond Off (Remove battery and put it back). In turned off Diamond I press and hold volume down + press and hold reset and turn the Diamond on. This it bring him to Bootloader.
Try it if it works for you.
Im sorry for my bad English.
whoever needs to fix dead diamond, you can PM me for help
but I can only help if the device can still boot to bootloader (tricolour screen).
by unlock...did you mean security unlocker?
htc diamond usb data tranfer is not working
how can recover 4 gb data in htc diamond internal memory
usb data transfer is not working b"coz by mistake cable is broken and data tranfer is working stop
any one help me,
bluetooth tranfer is working but it's very slowly
I've managed to really stuff up my rx1950 after flashing it with the Factory 6.1 ROM upgrade. All it does now after a reset is to run through the progress bar on the +hp initial screen and then sit there and sulk. The ROM version on the screen is 1.01.04. I've tried everthing I could Google for but to no avail. I cannot get it into bootloader mode, each time I press calendar, email and reset till it comes to life I just get the +hp screen again and no sign of a white screen. I've tried to flash it from a PC but that can't connect. I've tried installing the CEOS.nbf file on the root of a blank SD card and resetting, hard resetting and bootloader resetting.. I only get the +hp screen. I read about pressing the power and reset buttons, releasing reset and it should go into the ROM loader mode from the SD card but that does not work. I've tried bootloader.exe and Bootloader_GUI.exe with no avail. Is there any other options or no hope for me?
Thanks,
Steve
help... i tried to change rom into wm6.5 ariey ultimate from sd card
first it didn't start but after i taken out battery when hard reset, keep all buttons pressed and replaced battery , it started to install.
unfortunatly it got stuck into hp welcome screen of winmobile 6.5.
when after a while i tried resetting, soft reset didn't work, and hard reset brought it back into bootloader without continueing to load the rom.
so here it is stuck. im open for any suggestion what to do to resolve this.
when connecting to pc, usb device doesn't show or connect.
blank
xen3c said:
help... i tried to change rom into wm6.5 ariey ultimate from sd card
first it didn't start but after i taken out battery when hard reset, keep all buttons pressed and replaced battery , it started to install.
unfortunatly it got stuck into hp welcome screen of winmobile 6.5.
when after a while i tried resetting, soft reset didn't work, and hard reset brought it back into bootloader without continueing to load the rom.
so here it is stuck. im open for any suggestion what to do to resolve this.
when connecting to pc, usb device doesn't show or connect.
Click to expand...
Click to collapse
now after trying to hard reset several times it dropped completly dead
nothing works any more, tried replacing battery and reset , but screen stays blank (black)
only charging batttery still works , or at least the light from battery switches on when connected to charger