I've managed to really stuff up my rx1950 after flashing it with the Factory 6.1 ROM upgrade. All it does now after a reset is to run through the progress bar on the +hp initial screen and then sit there and sulk. The ROM version on the screen is 1.01.04. I've tried everthing I could Google for but to no avail. I cannot get it into bootloader mode, each time I press calendar, email and reset till it comes to life I just get the +hp screen again and no sign of a white screen. I've tried to flash it from a PC but that can't connect. I've tried installing the CEOS.nbf file on the root of a blank SD card and resetting, hard resetting and bootloader resetting.. I only get the +hp screen. I read about pressing the power and reset buttons, releasing reset and it should go into the ROM loader mode from the SD card but that does not work. I've tried bootloader.exe and Bootloader_GUI.exe with no avail. Is there any other options or no hope for me?
Thanks,
Steve
Related
I have tried to unlock the ext rom by changing the registry asdescribed in the forum, the result was a white screen tried a hard reset but the result became worser, a dead ppc with a black screen, only when I keep puching on the power button a red green light start flashing. I have tried every possible issue hard, soft reset. Tried to bootload from the sd card without a possible solution, can anybody help me out here, thanks
i guess there is only one option left, flash your device again
I have tried to flash again without succes, the flashing can happen only when there is a usb connection, the driver was not found and the ppc still dead.
bootloader mode!
Beny said:
I have tried to flash again without succes, the flashing can happen only when there is a usb connection, the driver was not found and the ppc still dead.
Click to expand...
Click to collapse
You need to put your fone into bootloader...try the wiki...
After flashing x51v with many roms including the latest makuu's WM 6.5 I think it died at last.It tries to boot but it only shows blue dell logo.I tried again to load many different roms but each time it fails in the middle.Under the"Sd Image Update AXX_g3" bar,It always says "Image update failed .Please try it again"
If possible I need suggestions any other than the followings as I tried them:
Ensured that it is not the battery latch problem and the lock button is not on.
Soft and hard reset was done and only showed blue dell logo.
I already tried waiting for about 30 mins but nothings happens. The bad side is that since this happened, I have the same effect with all other images I tried which flawlessly worked before. I tried the Dell ones and others from Lenny but they are not writing any longer, same as above. I still can start the process, so the bootloader is working.
I always use a fresh formatted card and the Ax is on external power each time. I learned that over time as well. I tried a third card today, 1GB, with the same result.
I did run the diagnostics and everything passed besides the "Flash" part.It shows only "0" each time. So this is why it refuses all images and does not start the write process.
For those who don't know, you can run the diag by holding Power and Record (below WLAN) buttons and pressing reset for a moment. Keep holding the other two until the diagnostics screen pops up.
Looks I successfully bricked my Ax.
help... i tried to change rom into wm6.5 ariey ultimate from sd card
first it didn't start but after i taken out battery when hard reset, keep all buttons pressed and replaced battery , it started to install.
unfortunatly it got stuck into hp welcome screen of winmobile 6.5.
when after a while i tried resetting, soft reset didn't work, and hard reset brought it back into bootloader without continueing to load the rom.
so here it is stuck. im open for any suggestion what to do to resolve this.
when connecting to pc, usb device doesn't show or connect.
blank
xen3c said:
help... i tried to change rom into wm6.5 ariey ultimate from sd card
first it didn't start but after i taken out battery when hard reset, keep all buttons pressed and replaced battery , it started to install.
unfortunatly it got stuck into hp welcome screen of winmobile 6.5.
when after a while i tried resetting, soft reset didn't work, and hard reset brought it back into bootloader without continueing to load the rom.
so here it is stuck. im open for any suggestion what to do to resolve this.
when connecting to pc, usb device doesn't show or connect.
Click to expand...
Click to collapse
now after trying to hard reset several times it dropped completly dead
nothing works any more, tried replacing battery and reset , but screen stays blank (black)
only charging batttery still works , or at least the light from battery switches on when connected to charger
Hi guys,
After trying to root my phone by using the rollback to 2.1 method (mt3srooter and superoneclick), my phone is stuck.
To elaborate, my phone is rolled back to 2.1 but I cannot for the life of me get it back to the 2.2.1 stock rom. I tried to do a factory reset and soft reset it but it either
1. Starts up showing an exclamation point inside of a triangle in front of a phone, after pressing power and the volume up button, I clear the cache, factory reset it and initiate system reboot which is when the phone does start up but vibrates 5 times while lighting up the notification light.
or 2. Boots regularly to 2.1 but is unstable and shuts off occasionally vibrating 5 times again
During the rooting process in mt3srooter I didn't turn on the wi-fi (due to the fact that I did not transfer the zip files beforehand and panicked) as instructed which I think caused the problem.
I already flashed esprimg but it's the same.
Also, my phone does not recognize that there is an SD card inside (I used two different microSD cards with no avail and formatted them). It does not register on my computer as a device it's just labled as "Unkown device" and the driver software fails to install.
Is there any way to get my phone back to the way it was?
Any help is appreciated!
Edit: The phone has no warranty, I bought it from a 3rd party unlocked.
Kaop said:
Hi guys,
After trying to root my phone by using the rollback to 2.1 method (mt3srooter and superoneclick), my phone is stuck.
To elaborate, my phone is rolled back to 2.1 but I cannot for the life of me get it back to the 2.2.1 stock rom. I tried to do a factory reset and soft reset it but it either
1. Starts up showing an exclamation point inside of a triangle in front of a phone, after pressing power and the volume up button, I clear the cache, factory reset it and initiate system reboot which is when the phone does start up but vibrates 5 times while lighting up the notification light.
or 2. Boots regularly to 2.1 but is unstable and shuts off occasionally vibrating 5 times again
During the rooting process in mt3srooter I didn't turn on the wi-fi (due to the fact that I did not transfer the zip files beforehand and panicked) as instructed which I think caused the problem.
I already flashed esprimg but it's the same.
Also, my phone does not recognize that there is an SD card inside (I used two different microSD cards with no avail and formatted them). It does not register on my computer as a device it's just labled as "Unkown device" and the driver software fails to install.
Is there any way to get my phone back to the way it was?
Any help is appreciated!
Edit: The phone has no warranty, I bought it from a 3rd party unlocked.
Click to expand...
Click to collapse
humm so the esprimg didnt work through the hboot and did you try to root again
The phone when trying to boot is stuck on the samsung logo. it doesnt progress past this. pressing and holding the power button makes screen go black and then it just returns to the samsung logo again when power button released.
Originally factory
reset phone... no difference,
wiped cache... no difference.
Got it to register in Odin. Odin crashed and hung part way through.
Now... computer doesn't recognise phone (drivers all installed)
Phone still stuck on samsung logo
Can't put in a file on SD card as it doesn't have option to install from zip from SD (think it was standard ROM and not rooted so doesn't have this ability from what I understand.)
Can get into recovery menus and download mode, however as PC can't recognize the phone can't do anything with it.
Anyone have any idea how I can make the computer recognize the phone so I can attempt to reflash it?
Many thanks
I have just gotten a new cable. The phone has been accepted by my computer with this new cable and I've now used the files on this forum to help flash the phone. This site is fantastic. I know noone has mentioned a response to this yet, however the ROM files accessible make it so easy from here. Thanks so much.