Hi, please help me i m new user of diamond my mobile did not store memory when align screen in a day i align the screen 100 times please tel me some body what i do
sorry to say but your digitizer (The plastic top of the screen) is broken, common problem in diamond, it a guaranteebusineiss but if no guarantee you can change it yourself but buy a combo with LCD screen...and use the searchfunktion...
Related
I gave my SPV M600 to replace scratch on screen, they opened phone and remove foil, when they place new foil phone work but don’t respond to pen, phone is working but I can’t do much without pen.
I want to buy new part but I don’t know what to buy.
Do I need new LCD or Touch screen ?
Please see these link and tell me what to buy
Touch screen http://www.phoneystore.com/product.asp?id=113675
Replacement LCD http://www.phoneystore.com/product.asp?id=114325
Best regards from Belgrade and sorry for my English.
If the screen works, but doesn't respond to touches, only the touch screen is required.
Sorry but I have quite the same probleme, my Prophet is a little damaged at the right part of the screen (with pen, because of grab-and-scroll) and won't respond anymore. I'd like to change some parts, but in this case is it touch screen/lcd screen or both ?
Thanks for your help (Sorry for my english, I'm French)
Hi you guys, does anyone know if you disamble the artemis easy and replace the touch screen? ( i was mad and smashed it, i kind of regret it, i know i shoud get anger management !). The phone is working fine, since i can connect it to my pc, the only problem the screen is black!
any guys any ideas or experience?
thank you.
hi, depending on which part you have broken, will depend on how much it will cost. Its fairly easy to change tho. If you have a look in the Wiki there is a guide to repairing the Artemis.
There are two parts to the screen the 'touch' bit on top (digitiser) and the actual LCD screen. If it is just the touch bit that has broken, then you can get a replacement one for around £7 on eBay. If the LCD has broken (which i am guessing it has caus u said it is just a black screen) then you can get a digitiser and a LCD for around £30. It is easier to replace both, as it is just a unit which is stuck in with double sided tape. WARNING: the ribbon cable which plugs into the main board from the screen is VERY fragile!
Hope this helps
broken screen
there are two different screen modules available for the Artemis. They are NOT interchangeable. In one case touch-screen module and LCD screen are seperate and in the other case they are both integrated into one module.
regards,
Bjorden
your gonna have to open it like i did, and find out which screen!.. also the touch screen is replaceable but its a ***** to do.. just get the whole screen on ebay 40 usd lcd and touchscreen very simple plug and play
where can i find display for artemis?
try ebay
thank you
http://mobile.brando.com.hk/
i just replaced my screen with one ebay 30$ screen(hong kong) - works nicely.
Just be sure that it includes touch screen as well - most of the case they come together.
Did this take long to do?
Any problems in the process of changing screens over?
southeastblue said:
Did this take long to do?
Any problems in the process of changing screens over?
Click to expand...
Click to collapse
Some ebay screen offers include the T6 screwdriver so you can change the screen DIY way.
I ordered screen without the T6 and choose the easy way out - local gsm and phone shop did the job ( cost in estonia $30 dollars ) .
edit: one thing that bothers me - in direct sunlight it impossible to see the screen..even when the brightness is at its full potential. I dont remember was that the case also with the old screen.
Its really hard to read anything from the screen outside. Other wise the screen is crisp and looks the same as the old one.
I change my Screen a couple of days ago both screen and digitzer (touchscreenpart) i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer and i followed a guid to take my artemis apart i useed the green plastic tool the torx tool that was included but after a while i relized i neede a smal "cross + " screwdriver (is that called philips) and had to turn my house over to find one but when i found a working one it took about 20 minutes to get the new screen in place. works fine except that i need to use alot more pressure in the top right corner to activate the ok or close tap than i need in the rest of the screen don't know if that is becouse of the screen it self or my instalation or a software issue but it work and i rather push a little harder using my artemis then having it laying around at home with a broken screen.
I have the same bad in sunlight thinngy with my new screen but i will live with it.
ElVikin said:
I change my Screen a couple of days ago both screen and digitzer (touchscreenpart) i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer and i followed a guid to take my artemis apart i useed the green plastic tool the torx tool that was included but after a while i relized i neede a smal "cross + " screwdriver (is that called philips) and had to turn my house over to find one but when i found a working one it took about 20 minutes to get the new screen in place. works fine except that i need to use alot more pressure in the top right corner to activate the ok or close tap than i need in the rest of the screen don't know if that is becouse of the screen it self or my instalation or a software issue but it work and i rather push a little harder using my artemis then having it laying around at home with a broken screen.
I have the same bad in sunlight thinngy with my new screen but i will live with it.
Click to expand...
Click to collapse
i ordered another screen from ebay ( a little more expensive - promised to be ORIGINAL HTC screen?! = ). Will let you know how this works in direct sunlight.
Users with original screen - can you read your HTC screen without problems in direct sunlight if the brightness is at full level?
you can see more here:
http://www.ssmoviles.com/product_info.php?products_id=355
ebay screen
just try ebay with 'display p3300', I got mine for about 40 us dollar shipping included. it works fine and there are a lot of manuals for dissassembling the artemis. just google: 'disassemble htc p3300'.
watch for the following: the artemis doesn't have torx 6, but torx 5!!! trox 6 won't work.
I was on service with my Artemis and is not the display with problems, the motherboard is broken. Where can I find such part?
You can find the LCD screen with touch screen at http://www.RepairsUniverse.com. It includes fitting guide and ships direct from the US, not from HK.
ElVikin said:
i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer
Click to expand...
Click to collapse
It doesn't involve any soldering to change only the touchscreen as far as I can see. You can plug the touchscreen cable in the display, just like you plug the display cable in the mainboard.
i have one id jhonyvyrus on yahoo
Screen Has No Reaction At All When I Touch It Help Please
System / Screen / Align - Proceed as smooth as possible to have a more responsive screen.
how do i get to that without having to touch the screen
Use windows button then the keyboard keys to navigate to the app or setting you want.
Of course, if the digitizer on your screen is stuffed, then it doesn't matter what you do. The lcd and digitizer (easier to replace both) will need to be replaced....
Coucou!
You said it is easy to replace both of them... Ok, it's quite easy to dismantle it, putting it into small and numerous pieces!
But there is a foam adhesive (correct word? Remember, I'm french.... Sorry... ) that glue the screen to the phone. How can you replace it???
I desperatly need advices, as my phone is currently in a basket!
Coucou !
Is there anybody out there?
(Pink Floyd, The Wall, 1979 )
Hello XDA,
I dropped my phone a while ago and the outer screen got cracked, nothing happened to the screen it self, so i kept using my phone for a month or so before i found a place to replace the outer frame only, the screen used to work perfectly, after i changed the frame, i had touch problems, so i decided to change the whole screen, after changing the screen i had a dead strip, the touch is not responding in that area, here is a screen shot, Could it be a problem with the new screen/digitizer or connection problem? Please direct me.