I gave my SPV M600 to replace scratch on screen, they opened phone and remove foil, when they place new foil phone work but don’t respond to pen, phone is working but I can’t do much without pen.
I want to buy new part but I don’t know what to buy.
Do I need new LCD or Touch screen ?
Please see these link and tell me what to buy
Touch screen http://www.phoneystore.com/product.asp?id=113675
Replacement LCD http://www.phoneystore.com/product.asp?id=114325
Best regards from Belgrade and sorry for my English.
If the screen works, but doesn't respond to touches, only the touch screen is required.
Sorry but I have quite the same probleme, my Prophet is a little damaged at the right part of the screen (with pen, because of grab-and-scroll) and won't respond anymore. I'd like to change some parts, but in this case is it touch screen/lcd screen or both ?
Thanks for your help (Sorry for my english, I'm French)
Related
Hi you guys, does anyone know if you disamble the artemis easy and replace the touch screen? ( i was mad and smashed it, i kind of regret it, i know i shoud get anger management !). The phone is working fine, since i can connect it to my pc, the only problem the screen is black!
any guys any ideas or experience?
thank you.
hi, depending on which part you have broken, will depend on how much it will cost. Its fairly easy to change tho. If you have a look in the Wiki there is a guide to repairing the Artemis.
There are two parts to the screen the 'touch' bit on top (digitiser) and the actual LCD screen. If it is just the touch bit that has broken, then you can get a replacement one for around £7 on eBay. If the LCD has broken (which i am guessing it has caus u said it is just a black screen) then you can get a digitiser and a LCD for around £30. It is easier to replace both, as it is just a unit which is stuck in with double sided tape. WARNING: the ribbon cable which plugs into the main board from the screen is VERY fragile!
Hope this helps
broken screen
there are two different screen modules available for the Artemis. They are NOT interchangeable. In one case touch-screen module and LCD screen are seperate and in the other case they are both integrated into one module.
regards,
Bjorden
your gonna have to open it like i did, and find out which screen!.. also the touch screen is replaceable but its a ***** to do.. just get the whole screen on ebay 40 usd lcd and touchscreen very simple plug and play
Hey People,
I had recently brought htc touch hd and simply loved it but i had been putting the same in my pocket without the cover leading to many scratches on the top touch screen. I am looking for a replacement but i really dont know, do i need to change the housing or is it the digitizer or the face plate..i am confused..
With my limited searching skills, if i look for housing, it shows the external body but not sure if its includes the top glass that is scratched. If i look for digitizer, it is the complete touch screen mechanism..does this need to be changed or their is the top glass/film which comes on top of this.. or is it called faceplate.. it would be real helpful if some can give me the link to this top glass/cover or film whatever it is called..
P.S :- My touch screen works absolutely fine and so is the display.
Nishant said:
Hey People,
I had recently brought htc touch hd and simply loved it but i had been putting the same in my pocket without the cover leading to many scratches on the top touch screen. I am looking for a replacement but i really dont know, do i need to change the housing or is it the digitizer or the face plate..i am confused..
With my limited searching skills, if i look for housing, it shows the external body but not sure if its includes the top glass that is scratched. If i look for digitizer, it is the complete touch screen mechanism..does this need to be changed or their is the top glass/film which comes on top of this.. or is it called faceplate.. it would be real helpful if some can give me the link to this top glass/cover or film whatever it is called..
P.S :- My touch screen works absolutely fine and so is the display.
Click to expand...
Click to collapse
Have you searched on ebay, i always get all my PDA parts there...
As above
i know where to get them but i don't which part is it? Digitizer or Faceplate or Housing?
Hi,
I broke my screen glass and the touch-screen (digitizer?) works just fine, as well as the LCD panel.
I would like to (try to) replace the glass, but I am in a kind of the same dilema as you.
I think the digitizer is touch-receiver + GLASS (not just the thin film).
Can you (or anyone else) confirm this?
Thanks,
cheers,
Nenad
Nishant said:
i know where to get them but i don't which part is it? Digitizer or Faceplate or Housing?
Click to expand...
Click to collapse
The part you want is the digitizer, that the part you touch with your stylus, the lcd screen sits underneath this, they are glued together and are hard to seperate, buying just the digitizer can lead to many problems, its better to buy an lcd screen and digitizer allready together then just replace the whole thing
Hello,
I've just broken the display of my P3300
Now I want to replace this because the screen still works...
The screen works everywhere (even where the crack is), the touchscreen doesn't work anymore (nowhere).
Is my touchscreen broken or the whole display? And can I easy replace it?
tx
I've had to replace the touchscreen on my brothers 02 orbit twice , the screen costs around £18.50 of ebay, and is quite easy to replace you'll
find some guides using google,
He's now got hold of an aluminium case to protect from any more breakages
You have to replace the whole screen
i have a problem were i can use my stylus as normal on my screen and it works fine but in my not pad or games there is a problem were it looks like its not working proper as it should ill drew something and the lines are not strait and go very jaged and arnt were i drawed them this is on the xda orbit dose this do it on all of them and if not what is the best fix for this problem thanks for your help in advance hope some one can shead some lite on this
Hi, please help me i m new user of diamond my mobile did not store memory when align screen in a day i align the screen 100 times please tel me some body what i do
sorry to say but your digitizer (The plastic top of the screen) is broken, common problem in diamond, it a guaranteebusineiss but if no guarantee you can change it yourself but buy a combo with LCD screen...and use the searchfunktion...
Screen Has No Reaction At All When I Touch It Help Please
System / Screen / Align - Proceed as smooth as possible to have a more responsive screen.
how do i get to that without having to touch the screen
Use windows button then the keyboard keys to navigate to the app or setting you want.
Of course, if the digitizer on your screen is stuffed, then it doesn't matter what you do. The lcd and digitizer (easier to replace both) will need to be replaced....
Coucou!
You said it is easy to replace both of them... Ok, it's quite easy to dismantle it, putting it into small and numerous pieces!
But there is a foam adhesive (correct word? Remember, I'm french.... Sorry... ) that glue the screen to the phone. How can you replace it???
I desperatly need advices, as my phone is currently in a basket!
Coucou !
Is there anybody out there?
(Pink Floyd, The Wall, 1979 )