Hello,
I've just broken the display of my P3300
Now I want to replace this because the screen still works...
The screen works everywhere (even where the crack is), the touchscreen doesn't work anymore (nowhere).
Is my touchscreen broken or the whole display? And can I easy replace it?
tx
I've had to replace the touchscreen on my brothers 02 orbit twice , the screen costs around £18.50 of ebay, and is quite easy to replace you'll
find some guides using google,
He's now got hold of an aluminium case to protect from any more breakages
You have to replace the whole screen
i have a problem were i can use my stylus as normal on my screen and it works fine but in my not pad or games there is a problem were it looks like its not working proper as it should ill drew something and the lines are not strait and go very jaged and arnt were i drawed them this is on the xda orbit dose this do it on all of them and if not what is the best fix for this problem thanks for your help in advance hope some one can shead some lite on this
Related
Hi you guys, does anyone know if you disamble the artemis easy and replace the touch screen? ( i was mad and smashed it, i kind of regret it, i know i shoud get anger management !). The phone is working fine, since i can connect it to my pc, the only problem the screen is black!
any guys any ideas or experience?
thank you.
hi, depending on which part you have broken, will depend on how much it will cost. Its fairly easy to change tho. If you have a look in the Wiki there is a guide to repairing the Artemis.
There are two parts to the screen the 'touch' bit on top (digitiser) and the actual LCD screen. If it is just the touch bit that has broken, then you can get a replacement one for around £7 on eBay. If the LCD has broken (which i am guessing it has caus u said it is just a black screen) then you can get a digitiser and a LCD for around £30. It is easier to replace both, as it is just a unit which is stuck in with double sided tape. WARNING: the ribbon cable which plugs into the main board from the screen is VERY fragile!
Hope this helps
broken screen
there are two different screen modules available for the Artemis. They are NOT interchangeable. In one case touch-screen module and LCD screen are seperate and in the other case they are both integrated into one module.
regards,
Bjorden
your gonna have to open it like i did, and find out which screen!.. also the touch screen is replaceable but its a ***** to do.. just get the whole screen on ebay 40 usd lcd and touchscreen very simple plug and play
where can i find display for artemis?
try ebay
thank you
http://mobile.brando.com.hk/
i just replaced my screen with one ebay 30$ screen(hong kong) - works nicely.
Just be sure that it includes touch screen as well - most of the case they come together.
Did this take long to do?
Any problems in the process of changing screens over?
southeastblue said:
Did this take long to do?
Any problems in the process of changing screens over?
Click to expand...
Click to collapse
Some ebay screen offers include the T6 screwdriver so you can change the screen DIY way.
I ordered screen without the T6 and choose the easy way out - local gsm and phone shop did the job ( cost in estonia $30 dollars ) .
edit: one thing that bothers me - in direct sunlight it impossible to see the screen..even when the brightness is at its full potential. I dont remember was that the case also with the old screen.
Its really hard to read anything from the screen outside. Other wise the screen is crisp and looks the same as the old one.
I change my Screen a couple of days ago both screen and digitzer (touchscreenpart) i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer and i followed a guid to take my artemis apart i useed the green plastic tool the torx tool that was included but after a while i relized i neede a smal "cross + " screwdriver (is that called philips) and had to turn my house over to find one but when i found a working one it took about 20 minutes to get the new screen in place. works fine except that i need to use alot more pressure in the top right corner to activate the ok or close tap than i need in the rest of the screen don't know if that is becouse of the screen it self or my instalation or a software issue but it work and i rather push a little harder using my artemis then having it laying around at home with a broken screen.
I have the same bad in sunlight thinngy with my new screen but i will live with it.
ElVikin said:
I change my Screen a couple of days ago both screen and digitzer (touchscreenpart) i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer and i followed a guid to take my artemis apart i useed the green plastic tool the torx tool that was included but after a while i relized i neede a smal "cross + " screwdriver (is that called philips) and had to turn my house over to find one but when i found a working one it took about 20 minutes to get the new screen in place. works fine except that i need to use alot more pressure in the top right corner to activate the ok or close tap than i need in the rest of the screen don't know if that is becouse of the screen it self or my instalation or a software issue but it work and i rather push a little harder using my artemis then having it laying around at home with a broken screen.
I have the same bad in sunlight thinngy with my new screen but i will live with it.
Click to expand...
Click to collapse
i ordered another screen from ebay ( a little more expensive - promised to be ORIGINAL HTC screen?! = ). Will let you know how this works in direct sunlight.
Users with original screen - can you read your HTC screen without problems in direct sunlight if the brightness is at full level?
you can see more here:
http://www.ssmoviles.com/product_info.php?products_id=355
ebay screen
just try ebay with 'display p3300', I got mine for about 40 us dollar shipping included. it works fine and there are a lot of manuals for dissassembling the artemis. just google: 'disassemble htc p3300'.
watch for the following: the artemis doesn't have torx 6, but torx 5!!! trox 6 won't work.
I was on service with my Artemis and is not the display with problems, the motherboard is broken. Where can I find such part?
You can find the LCD screen with touch screen at http://www.RepairsUniverse.com. It includes fitting guide and ships direct from the US, not from HK.
ElVikin said:
i hear that it was hard and ivolved soldering to change only the digitizer so i bougt the screen with digitizer
Click to expand...
Click to collapse
It doesn't involve any soldering to change only the touchscreen as far as I can see. You can plug the touchscreen cable in the display, just like you plug the display cable in the mainboard.
i have one id jhonyvyrus on yahoo
Hello,
I dropped my Touch Pro 2 in fresh water. No insurance of course and no more discount from T-mobile to buy a new phone.
Following video instructions on youtube I disassembled it, I believe without breaking anything.
The LCD screen was gone (water inside), and I bought a new one in eBay.
Once I received it I reassambled the phone. Evertyhting seems to work fine but... the screen is stuck in landscape!
Of course I did soft and hard reset, tried to play / disable the G-sensor and orientation sensor, nothing: I believe it has to do with some switch that recognize when the keyboard is slide open, but I have no idea what sensor is it, I can't find any mechanism that resemble a micro switch or a mini magnet related to the opening / closing of the keyboard. Instead I find a microswitch that senses when the pen is inside, but nothing about the screen.
Any suggestion, does anybody here have any hardware knowledge on this topic? I tried to use software like Gyrator 2 which put a patch on the problem, but I would rather fix the hardware first: perhaps I did not mount something correctly, where is this sensor, is it magnetic or microswitch, I can't see anything even with lenses on.
thank you all in advance
....
I have exactly same problem, my TP2 is stuck in landscape mode. I bought TP2 in the US. My housing was broken so I bought a new one in europe the oem one with lcd screen and digitizer... Could this make the problem?
I am pretty sad, I dont want to buy a new phone :S
The sensor must be in the screen-half of the phone underneath where the red "end call" button is. This is demonstrated if a healthy phone is slid open, and then you pass a small magnet underneath the screen in that area, screen will flip between portrait and landscape.
Which yes I did the same thing today and it was your post randell that helped me. All you need to do is go to walmart purchase the smallest but most powerful smallest magnet you can find. cut you a piece of it, superglue it to the bottom right corner. worked like a charm.
or if you wanted to open your case back up like i did you can superglue it on the inside lol. If you look at your old case you will find your old magnet you can use. simple easy just thought id let you know k bye ta ta.
sabwjawdjw said:
which yes i did the same thing today and it was your post randell that helped me. All you need to do is go to walmart purchase the smallest but most powerful smallest magnet you can find. Cut you a piece of it, superglue it to the bottom right corner. Worked like a charm.
Or if you wanted to open your case back up like i did you can superglue it on the inside lol. If you look at your old case you will find your old magnet you can use. Simple easy just thought id let you know k bye ta ta.
Click to expand...
Click to collapse
thank you verrrrrrrryyyyyyyyyyyy muchhhhhhhhhhhhhhh
thank youuuuuuuuu
I was on here by chance and I had the same issue when I replaced my digitizer on my TP2 a year ago. I could never figure it out so I bit bullet and brought a new phone. I will try this when I get home and if it works be great because i loved that phone soo much when I had it thanks guys!!
Hi, I need help finding a digitizer for DHD.
Last week my phone fell down and the digitizer had broken. I know it didnt affected the screen because it still works fine, but its hard to touch the screen and to see in places with more light because the digitizer its all cracked.
If someone knows where to get a original digitizer for a fair price tell me please.
If possible I want to get it from somewhere in Europe because I live in Portugal and I dont want to pay all those taxes.
I have noticed now that I have another problems, maybe its just malfunction or the pieces are just out of place, but my Volume buttons and Wi-fi, GPS and Bluetooth only work when they want.
Im very upset because i had never left my phone falling on the ground and now I get all these problems for the first fall.
Its was not a big fall at all, it was less than 50 cm and it fell with the screen on the ground.
Thanks! :good:
Hi,
I've just replaced screen digitizer on my gf's Galaxy Ace II, which was run over by a car, but I have issues with it.
The problem is that the upper half of the display doesn't react to touches at all. Well, except for the very upper left corner,
so the status bar can be dragged down, although not 10 out of 10 times. The lower half of the display works without problems.
I was very careful during the replacement procedure and I alligned the digitizer's connector with the line on the motherboard.
I didn't use force at all (except for the disassembly), used no sharp tools and I didn't bend anything at all, so I believe I haven't physically
damaged the screen.
I suspect the unit I received may be faulty, although I highly doubt a cheap non-original screen sent from china could be faulty :laugh:
But before I am marked a fool for trusting eBay, is there anybody with the same issue and possible solution? Is there a possibility it just
needs recalibration, or hard reset?
Any help would be appreciated. I said to my gf I can handle that and don't want to disappoint her
Thanks in advance
Omg! How did your phone manage to run over by a car,!! Give it to Samsung! Don't try doing anything by yourself!
info
hy, maibe this link will hep you
http://www.sweet-apps.net/2012/10/1...el-on-a-samsung-galaxy-ace-2-nfc-model-i8160/
b0g said:
hy, maibe this link will hep you
http://www.sweet-apps.net/2012/10/1...el-on-a-samsung-galaxy-ace-2-nfc-model-i8160/
Click to expand...
Click to collapse
I couldn't find a guide myself, so I had to improvise, however I managed to do it the same way as it was described in the tutorial, except for
chipping the glass parts of the screen off. The problem is most probably in the screen digitizer. I already contacted the seller and he offered
to send me a new screen, however I can't be sure it will be working properly.
But thanks for the link, at least I can be calm that I haven't screwed anything during the process