htc p 3300 dead - P3300, MDA Compact III ROM Development

when i was restart my p3300.
ths phone didn"t startup,power botten also not working.after sometime,i pressed power botten phone is start.pls help me anybody,whats rang with a phone.pls

it's funny because i've got the same problem.
but i have it not once but several times.
probabyly i didn't format him since a year but it's funny that u have the same problem... phone valid??

Htc p3300 dead
Hi kammac, thanks for ur comments. i got a this problam is last 3months ago,pls what is the resolutions.what u mean phone valid? i don't know.My p3300 rom is cooked rom 6.5 WN 21725

some guy on another forum have the same problem.
but he goes to service point and thay said that there are micro holes in main board...
and as i analyse my phone carier i notice that he fall on the ground couple of times and he is quite beat-up.
so i expect that i have to buy new phone...
sry for bad news but that is the cruel truth...

Related

Returned MDA Pro for Repairs

Hi,
Today I returned to the T-mobile shop. I deliverd my dutch MDA Pro for Repairs.
I have the following complains:
- Battery dies at 54%. Very anoying.
- Calls are not clear, sometimes I cant understand anything someone say. I have a bad reception.
- Device is slow. You all know it.
Befor I returned my device, I took out my SIMcard, Memorycard and Stylus. I flash the latest dutch t-mobile rom (1.30.233) to my device and gave it a hard-reset.
The woman at the story told me I should receive a call in 10 workingdays to pick up my device. I'll let you know how it turns out.
Sharky,
IMHO Your Uni is ok. Battery issue was described many times over the forum and its connected to wornout battery. (In Your case Youll should get new battery after a repair so its good point)
Bad reception is propably because old radio rom - have You tried to upgrade it?
Slowness is a personal matter - mine is sometimes slow also but it depends on soo many elements thats its hard to define what precisely is slow.
Anyway how will You survive whitout Your Uni - its a question ;-)
best ,
Piotr
nabuhonodozor said:
Anyway how will You survive whitout Your Uni - its a question ;-)
best ,
Piotr
Click to expand...
Click to collapse
I know I can't. I just hope nothing goes wrong with my device, at least before any of the clamshell PDAs start to roll out. I would hate to buy another Universal, just to see a new version the next month.
BTW wats ur result after the upgrade did it solved ne of the problem .

TyTN (HTC Hermes 200) IMEI Wizard

Hi All,
I am interested in writing a new IMEI Update Wizard for the HTC Hermes 200 product line. Some of you might remember me from last year, when I undertook a similar project for my HTC Wizard (imate kjam brand).
Well, regretfully last week, my HTC Wizard's USB port "died"...I found out about it as I plugged in the USB cable to charge the battery and, lo and behold, no juice was flowing. A closer look showed a very "flotational" USB port, which upon further inspection, came totally loose. Without any way to re-charge the Wizard, or connect to it from my PC, the device became useless. Luckily I had two spare batteries so I was still connected while waiting for the new Hermes to arrive.
Its now been just a couple days since I came back to Turkey, and a-ha-ha, now its taken them barely 3 days to shut the phone down. Oh joy Last time at least it took a couple months before they did anything about it, and they were kind enough to send a courtesy SMS.
So anyways...without boring you with the backstory any longer. Please feel free to PM me, or reply directly to this thread, if you are interested in contributing to the development of the new IMEI Update Wizard. Like the previous one it will be released as a freeware tool (and without source to protect the anonymity of the people who help build it).
Also, if any fellow Turks browsing this forum have any useful information on how to legally register the phone with the Turkish authorities, I'm up for that information also. It took me a month to build the IMEI Update Wizard last time round...as long as the bureaucracy and response times aren't totally inane (one would hope they have improved over the course of the past year), I might just register the phone for a change. A month is a long time and a lot of sweat and I'm definitely feeling lazier this time
Take care people!
cool, i was just tryin 2 use your old tool 2 on my hermes (M3100) and couldnt do it i gues thats cuz it doesnt work on it . Sorry that i cant help as u can probs tell. Good Luck
Good luck on your work!
I'm still waiting for your new IMEI Wizard for Hermes since your last posting. Hopefully, you're still working on and about to finish sooner or later. Just remember we xda-developers on your back. Cheers!
edit edit edit
Waiting for you
I'm waiting for you, just waiting for you, I think you will be OK, you're genius
what is this wizrd used for?
thans
gurry
..
...edit...edit
herm wizard come ?
Hi mimarsinan, are you still work on this project ?
I am willing to help, I have a hermes (jasjam) for testing etc, I know a bit about coding etc. PM to discuss please.
regards
Muf
herm200
to Muf,
Herm200
i buy on ebay..
i do not get any gsm signal.. maybe imei blocked (i do not understand if..)
I try with two sim vodafone and when i turn on the device star serch for a gsm network .. after few mintus a point "!" come near to the gsm icone.
Thats all.
Lat me know if you can help ?
I what try to replace the imei to check if this is the problem.
I try call mya operator to, to know if the imei is blocked, but they said that can't give me this type of information ..
Regards
please help.
...............
tool is neeed updatefor new generations

sending back to get fixed need advice on OS version

hi im gonna send my phone back because the call/answer button doesnt work very well, i have flashed the phone to original htc but on the new windows mobile 6, i have downgraded the ipl and spl so i dont have olipro. Just wanted to know if its fine to send back phone on the new os or is it prefered if it was back on wm5 instead of 6?
i dont want them complaining its my fault for the button not working well, but i do know its hardware related but you know how companies will squirm out of paying to fix their problem.
Any advice would be grateful.
Kidd
I've seen many comments in many threads about returning phones under warranty and the consensus is that IPL/SPL or ROM probably doesn't matter. Nobody seems to notice....
I bricked my 8525 a couple of months ago while out in Los Altos, CA.
Took it into the AT&T dealership near Stanford. They exchanged it no questions asked. They basically looked it over to see if it had been dropped (looking for deep scratches), and checked the fluid indicator near the battery to ensure it had not gotten wet.
I don't think they care what version the phone is running, but I'm not 100% positive.
if ur phone is htc branded then yes it is okay as u are sending it back with a official htc rom. if its another then send it back with that carriers rom. better safe the sorry.
EDIT: i see u have a htc tytn so yes dont worrry about it as long as spl and ipl are the same as original.
thanks for the advice, hopefully the wont complain about the little scratches, im abit clumsy this past few weeks. Cheers all

someone knows a good repair shop for htc in europe ??

hi
i have lately get my phone stuck every 5 minutes , freeze , and other stuff.
i tryed to hard reset the device , but nothing helped.
i dont have warranty , so i cant send it in to htc support service.
dos any one know please a good repair shop for the artemis ? i think it has a hardware problem , maybe the cpu ,or the ram , or the gsm radio , or else.
if some one know anything about a place i'll be glad to hear.
i prefer uk but elsewhere in europe would be fine.
thanks .
Repair Shop
Yes, I know a very good one. Apex Laptops.
http://www.apexlaptops.co.uk/recovery.htm
Ask for Phil
Please DO NOT create 6 threads for the same question. That just clutters up the forum. The 5 other identical threads have been deleted and this will be your first warning. If you do this again you will be temporarily banned.
ok, sorry about that.

Htc touch diamond backlight doesnt work... :(

Hi ppl,
First of all, sorry for my bad english, cause i am from mozambique nd doest speak/write well english.
Lets go to the problem: i bought i Touch Diamond (new), 1 month later the backlight doesnt work , i cannt power on the phone cause i cant see nothing...... i need some help here, plzzzzz
when the backlight works, its work very dark i see something, nd the last thing i saw was this error:
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
Can u help me???
Thanks
i am waiting 4 ur answers...
I am sorry but I am quite sure that the only way to fix it is to ship it to htc to have it repaired.
It's an hardware failure.
Definitely hardware related and unable to be fixed via software of ANY kind.
I dropped my Diamond about 50cm to the floor and had exactly the same problem.
Seeing as my Diamond is out of warranty (and utilising my vast background in the repair of WSOD Hermes) I decided to pull my phone apart, press firmly on the screen-to-mainboard connector, and my phone was magically better!
No gaurantees, but I haven't had a problem since...long story short...DON'T drop the Diamond...it is crazy fragile!
Oki Fellows,
but i was searching in the web nd found some sites/foruns that say that problem its because the cel was flash wit other rom version, early my cel wasnt able to charge nd i send to our celphone operator (Mozambique Celular - MCel) to repair cause it was on warranty, thei repair it but some days later i had that problem.
Surely its a Hardware Problem????
When i had that problem i send an email to HTC Support, i think 2 weeks ago, but til 2daay i hadnt the answer, i want my touch diamond back, lool,
Thanks for help me...
I wil send again to my operator to see whats happen wit the cel....
[email protected]
**************************************************
http://www.fotolog.com/danny_3rdeye

Categories

Resources