Hey.. kan anybody help me?. My P3300 goes black several times a day?? i have flashed it back to its original ROM to check if that would help, but i didn´t.
The phone just goes black and i cant turn it on again without soft-resetting it. Sometimes the screen flicker and some stribes are showing across the screen before it turnes black??
I hope you can help me
Best regards Michael
i had the same problem, i send it to repair by t-mobile and they changed the lcd screen problem fixed
Seems to be a common problem, as I have exactly the same with my P3300. Send and email to the HTC customer support to ask if it could be a software issue (no reply yet) - but now that I read this post I guess I can send my device for repair right away...
I don't think the LCD is to blame for this issue. (why would the phone firmware "crash" - and unable to reboot ? )
@MicTh : those updates you've installed ? were they recent Mobile6 (B&B > 4.1, Vanilla 2.0,.. ?) from this board ?
I've got the same problem, T-Mobile replaced my handset twice (new IMEI) - reason "motherboard replaced" ???
I DO believe that USPL unlock is causing this problem now - too many MDA 3c's failing - while HTC 3000 / Orbits seem to run fine.
No.. I run the original WM6 ROM
No.. I run the original WM6 ROM, and I have also switched back to the one it came with, but i does not help
I'm getting this problem too... screen fades to black, and only way to re-start is to soft-reset. I have had two new motherboards in my original, and now HTC have replaced with a new unit, with factory WM6 and problem is the same. I was wondering if it was anything to do with software, as i do have a number of applications installed - but which one is to blame?
After I removed Spb Time, my P3300 works fine (for a week now)
pnyg
do I have sbp time? (is it "standard" or 3rd party s/w?) if I do, how do I remove it?
no, I've not got spb time, so its not that in my case....
I also experienced this problem when I installed Meschle 3.01 ROM. Cant remember if its vanilla or full version as I installed both.
I am now back to Original WM6 WWE from HTC. No problem at the moment.
first hang-up end with black scream
I have the same problem..I think
started with WM5 ..but even with WM6 is the same!
Problem description:
first of all app is hanging (ones a week)
first time rest ,its trying to start windows but will hang-up by start-up windows
second rest hangs on white scream (with WM version number)
further resetting doesn't help
white scream changes to black (some times in columns) and them totally black
some time the black scream is flashing
can any one help me?
i don’t know what to tray anymore? I think is some Hardware issue?
hang-up and later ended with black scream
I have the same problem..I think
started with WM5 ..but even with WM6 is the same!
Problem description:
first of all app is hanging (ones a week)
first time rest ,its trying to start windows but will hang-up by start-up windows
second rest hangs on white scream (with WM version number)
further resetting doesn't help
white scream changes to black (some times in columns) and them totally black
some time the black scream is flashing
can any one help me?
i don’t know what to tray anymore? I think is some Hardware issue?
I've had at least 3 separate P3300s with this problem. I'm sure its a hardware issue, and I have finally persuaded my supplier to refund 75% of my purchase price, so I can buy something different. I am sure HTC must know this is a problem, but the uk repair centre seem unable to fix it, presumably as its a batch problem, and all the boards they have are faulty.
i have exactly the same problem with my Dopod M70 (Artemis300). Maybe it have some problem in the motherboard design which HTC should let us know
My orbit do the same, when it boot win everythink is working fine. Someone did say: When you apply pressure, it fade to black. I think it maybe have something with the housing design or battery.
keckek said:
i have exactly the same problem with my Dopod M70 (Artemis300). Maybe it have some problem in the motherboard design which HTC should let us know
Click to expand...
Click to collapse
I think i solve my own problem, after hours, i found out when we press in the back phone, near the display cable position, the screen become black and hang immediatetly. so i try to open back cover, remove cable and motherboard. Use alcohol to clean the contact display cable then put its together. Tighten motherboard, and wow, my Dopod M700 are back to life again, now how hard i press, everything stay fine. No strange behavitor for 5 days. GREAT!!!
Hope everyone think my experience useful
Sounds great but...
Hey.. sounds great.. but i´m affraid to take mine appart.. i think it is very difficult to take the cover appart without ruin it
MicTh said:
Hey.. sounds great.. but i´m affraid to take mine appart.. i think it is very difficult to take the cover appart without ruin it
Click to expand...
Click to collapse
No it is easy(much easier than TyTN) to open Orbit/P3300, you have intructions in the wiki. First you check if you have right tools...
igord said:
My orbit do the same, when it boot win everythink is working fine. Someone did say: When you apply pressure, it fade to black. I think it maybe have something with the housing design or battery.
Click to expand...
Click to collapse
That's probably me from this post?
http://forum.xda-developers.com/showthread.php?t=290414
I find that if you apply pressure on the outside casing at approximately where the simcard would be it switches itself off....
Yes it's your post. I have same problem. My orbit is working fine all day, but it is on the desk, didn't touch it. I bought P3300 housing, so I will change it, maybe it fix a problem.
hi to all
i have diamond with spl 1.40.olinex running 1.93.831.1
my touch screen got a problem.it senses only on left side,for ex: when device turned on without sim,on the nunbers screen,when i touch 3 it senses 1,touching 6->4 , 9->7.
is there any chance that its soft problem or should i change the lcd?
tnx
settings->screen->align screen.
wrong section, your thread does not belong here.
sorry
aligning screen is not helping
thought that maybe someone has same situation and will try to flash another spl
I have seen this before and a hard reset cured it for me
I Have T Mobile MDA Compact III (HTC P 3300, Artemis), and the screen is not responding properly to taps. I got the touch screen replaced. Still the problem continues. I have flashed B&B WM6 rom. Still the same problem. Will installing these roms also flashes extended ROM. Would corrupt extended ROM give the screen problems.
I have seen many people having this problem. THe service center people say it may be virus/crashed OS. While I am able to flash HTC WWE WM5 rom, and B&B rom etc. these people are not able to flash the HTC official roms. Can anybody please explain. DO i need to go for mother board repaid. Is it available on ebay.Please help. I used this phone for 3 months only and I liked it very well. I am now afraid ofthese touch screen phones.
Do you tried with whole new LCD module?
Hello everybody!
I am a newbee and sorry for my english.
I got my Htc p3300 few weeks ago and now i have a problem.
My screen gets white when i am using the phone.
I want to know if this is a ROM problem or a LCD problem
I repet again that the screen gets white after opening a program or taping somewhere over the screen.Please i really need your help!
try reinstalling application if not then try installing rom again
Well my MDAIII turns itself off or crashes. Mostly on the HTC screen from the new 6.5.5 Rom from D-Two. This problem persists since the first WM6 rom I flashed on the system.
Sometimes it crashes on the screen with the four colors. SOmetimes in the touchflo or in settings.
Everytime the screen goes black and you see some stripes. When I put out the battery and stick it back in it runs until the HTC boot logo or one of the other mentioned above.
When I clean the Registry Hive and format the Storage. The BLueAngel runs a bit longer without crashing.
The battery is still at 60 percent.
Is this a known problem?
Also I think that I need a new microphone. The one in the BlueAngel is defect. No one can hear me. When I put a Headset in to socket on top. Everything is fine.
Similar Problems
Hi,
I know, that won´t help U, but my Blue Angel has similar problems.
I´ve tried 6.1 Manila and 6.5.5.
Both run well and then, without any obvious reason I get a black screen.
In 6.5.5 the reset lead to a hang and showed R None G None D 6.5.5
After a further reset it showed R 1.1.5 G 1337.45 D 6.5.5
but it didn´t boot at all.
WLAN didn´t work at all in 6.5.5, so I´ve turned to 6.1 + Manila.
But there my device also hangs up, but I can reboot it.
Sadly the Blue Angel don´t run stable and crashes also, like in 6.5.5 without any obvious reason.
Maybe d-two can help, but I´m a new User and not allowed to post in the rom-developer forum.
Stay tuned
Greez from good old Germany