Related
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
I ran the same ROM instalation (2003 SE 2.06) and waited for it to erase my ROM, then I took the phone out of cradle. I was dead at that point. I removed main battery, put it back in. Reboot the phone in bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time). Then I put the phone back into the cradle and ran the ROM instalation of my choice. No more problems.
Well, I think using SD card method may be saver.
However, I forgot how to do this.
Cheers,
Darko3 said:
I figured this out by accident..
I upgraded to windows mobile 2003 SE 2.06 but after I found out that half of the programs (MMS composer, cammera, etc..) dont work, due to incompatibility (error message says they are incompatible) I wanted to downgrade.
Click to expand...
Click to collapse
Same thing, I badly need to downgrade to 1.72 or 1.66. I tried it, it did not work. I was was adviced that there is a 1.66 SD version which is safe and possible to apply, any advice where can I find it???
Bty, MTUX 1.4 Ring tone, and other software runs very slow and creats porblems with 2.06!! Beside 2.06 hard reset by itself on weekly basis!!!
Any advice where to find 1.66 SD version?
HELP HELP HELP....
hello people...
i desperately need to downgrade from wm2003se to wm2003. please tell me where can i find my original rom of wm2003. thanx you.
by the way... my ppc is an O2 Xda II.
please do help somebody... its kinda urgent...
Hi All,
last week i purchased HTC touch, i was experimenting with software, there was a problem, when i was installtion bullguard antivirus.
Now my Windows Mobile 6 is got corrupted, NOt all features are working, and WM6 is not functioning properly.
Kindly suggest me, if i can Flash WM6 on my phone ( I hope it will seems as i got new phone)
or i should give it back to HTC people...
please suggest me what the best i can do...???
Help needed...
please post and help me...
the.reverser said:
Hi All,
last week i purchased HTC touch, i was experimenting with software, there was a problem, when i was installtion bullguard antivirus.
Now my Windows Mobile 6 is got corrupted, NOt all features are working, and WM6 is not functioning properly.
Kindly suggest me, if i can Flash WM6 on my phone ( I hope it will seems as i got new phone)
or i should give it back to HTC people...
please suggest me what the best i can do...???
Help needed...
please post and help me...
Click to expand...
Click to collapse
Read the User Manual, there you can see how to do a HARD RESET to let your TOUCH as new.
User22 said:
Read the User Manual, there you can see how to do a HARD RESET to let your TOUCH as new.
Click to expand...
Click to collapse
Thanks a lot User22, your guidance really worked, it is again virgin now...
but i am not able to understand one thing when all the executables were corrupted then how come it is able restore all the factory default, is it already having copy of initial files somewhere.
No everything is in the ROM, and always will. Your software changes stay in a user writable area, that are erased when doing a hard reset, thus leaving the original stuff in ROM.
Hi All,
first of all... if this question is being asked at the wrong place.. please let me know ;-)
Well.. i have a question.. I have a daxian x999 and want to upgrade the OS.. The OS on this device isn't fast and can be quite unstable sometimes..
anyone can tell me how i can upgrade this device?? I'm a complete newbie on this one.. so any help would be appreciated..
thanks!!!
no one has a clue??
Rom
hi there!
the problem with the daxian x999 is, that until now no one managed to extract the bootloader!
i tried almost every software i found here... no success!
i was able to extract the rom, but that doesn´t help too much
and another thing that is very sad, is that no one from the "knowing Guys" here is interested in helping us!!!
there was just one senior member trying to help me... (thanx again the_eqionoxe!!!)
i expected some more help from a forum with that much experience...
regards
chuckbert
You say you were able to extract the rom, please share how you did this ....
i was able to extract the rom, but that doesn´t help too much
Click to expand...
Click to collapse
Thanks
Sorry i found it in the very next search
As far as I know it should be presented in the form of a imgfs file (can be cooked by any kitchen). (*but I am not 100 % shure, I don't have a daxian to experiment with)
But I am unaware about the XIP format .
If we had a look @ a original update.img then we could say how it was compiled, and hopefully port other rom's to it.
any have yep put 6.1 on this phone?
I have a daxian x999 but its in chinese & if i cant get it exchanged will want to change the windows rom to an english one - cant find the english rom though (& need to learn how to do it too lol)
I used SPB backup to restore my data, and stopped it midway, now my power button does not turn on the screen. So I have to wait for a phone call to come in for the screen to come on.
Anyone know if I use an editor for registery if there is a place to turn this back on.
Thanks, if not, then I will start to research how to get deeper into the phone, as it is useless to me know.
"I used SPB backup to restore my data, and stopped it midway, now my power button does not turn on the screen. So I have to wait for a phone call to come in for the screen to come on.
Anyone know if I use an editor for registery if there is a place to turn this back on.
Thanks, if not, then I will start to research how to get deeper into the phone, as it is useless to me know."
Have u tried a soft reset?????? or maybe a "master clean up" as it is called on the phone???
also if someone here is going deep into the phone, can some1 figure out how to 'manage' the accelerometer for the current application/settings of it seem pretty dull... i don't know if it helps, but the process which rotates the screen is called acc_ap and you can find it in the start up folder
Yes, I tried the soft reset, memory clear, and hard 3-button reset, no joy.
nobody tried with pdocwrite as MUN_rus has done with HTC wizard G4??
WARNING This device needs OTHER drivers than a HTC ELF(in), so make sure you cook a ROM with the proper drivers!!.
You can probably dump the rom by the reverse command pdocread..
Haven't tried it myself, as I have stated before, I have no daxian 999 to experiment with myself..
Hi guys,
i flashed my i780 with the heroes 6.1 rom. after 1 day of perfect functionality i couldnt unlock it because the touch screen didn`t respond anymore. then after some time i managed to unlock it, but it seemed the ui crashed, so i had to reboot. after boot all data were gone like just after a hard reset. i tried plenty other roms but it`s everytime the same. after some time the phone crash and i need to reflash it. so i think that my phone is damaged someway. i still got warrenty, but i don`t have the original roms anymore. do anyone know, where i can download the original samsung wm 6.0 roms (german)? i also need the original phone rom so i can send the phone to samsung. thanks in advance
ouch! That'll be hard to find!
What you could do is order a new i780....and anyway you have a 7 day return and money back option....do a rom dump and send it back
shockabuku said:
Hi guys,
i flashed my i780 with the heroes 6.1 rom. after 1 day of perfect functionality i couldnt unlock it because the touch screen dind`t respond anymore. then after some time i managed to unlock it, but it seemed the ui crashed, so i had to reboot. after boot all data were gone like just after a hard reset. i tried plenty other roms but it`s everytime the same. after some time the phone crash and i need to reflash it. so i think that my phone is damaged someway. i still got warrenty, but i don`t have the original roms anymore. do anyone know, where i can download the original samsung wm 6.0 roms (german)? i also need the original phone rom so i can send the phone to samsung. thanks in advance
Click to expand...
Click to collapse
take a look here --> http://forum.xda-developers.com/showthread.php?t=398874
thx a lot,
once again i tried the heroes 6.1 rom but this time without syncing my phone to my pc. `til know everything works. maybe my activesync is the problem. i try the latest usb driver from samsung. i hope it work
shockabuku said:
thx a lot,
once again i tried the heroes 6.1 rom but this time without syncing my phone to my pc. `til know everything works. maybe my activesync is the problem. i try the latest usb driver from samsung. i hope it work
Click to expand...
Click to collapse
delete the actual activesync and reboot your pc, download the latest version of activesync (4.5) from samsung official site and delete the old connection. reinstall the sw and try again.
Bye
gianvi60 said:
delete the actual activesync and reboot your pc, download the latest version of activesync (4.5) from samsung official site and delete the old connection. reinstall the sw and try again.
Bye
Click to expand...
Click to collapse
hello ... i flash my phone, he got stuck at 13% , after that the phone is stuck at loading windows page, i tried anothers roms but nothing, pls can u help me ? i think i need a official rom or something like that... pls help me, pls teach me
Samsung Office WM 6.1
This is office Samsung I780 Windows Mobile 6.1 upgrade.
http://www.samsungmobile.com/support/i780/index.jsp
you can has a try.
towseng said:
This is office Samsung I780 Windows Mobile 6.1 upgrade.
http://www.samsungmobile.com/support/i780/index.jsp
you can has a try.
Click to expand...
Click to collapse
1. i can`t find the SGH-i780 Updater, when i press the "firmware download" button i go to webside and there is nothing, i can`t find updates.
2. my activesync cannot see the phone so i can`t use a .exe update... just mirage see the phone when is in emergency mode...
hello everyone..
this morning I was intended to revert my kaiser back to WM 6.1,
I followed the instruction to put the ROM to my SD card along with KAISDIAG.nbh.
but maybe I chose a wrong rom, as the process goes, I just realize that the process was deleting my hard SPL..
now the text my 3 color display only says "SPL-1.56.0000"
but the android is still working....
so now my phone run on android without hard SPL...
could anyone help me? is it possible to install a hard SPL from android?
flashing from SD card doesn't works because I don't have any hard SPL installed..
There is no way at present to install hardspl from android, since we cannot run jumpspl, however you should still be able to flash a stock 6.1 rom using usb method.
Sent from my HTC Dream using Tapatalk
I have tried, but the process always failed with connection notification.It says that update utility cannot connect with my pda phone.
Well the problem is, flashing with usb method needs activesync connection with the computer. since microsoft activesync doesn't applicable anymore, I have no idea how to build connection with my phone. Besides, nothing seems happened every time I connect my phone with usb cable. Its just like my pc couldn't detect the device.
Should I install some kind of programs first on my pc? or am I miss some steps to make my phone detected by my computer?
I'm using windows xp by the way..
The CustomRUU still works for me if you boot the phone into SPL first (reset and camera+power buttons) then plug it into the computer and run the RUU (no activesync connection), so you should be able to flash a WM ROM, then you can sort out the HardSPL later
EDIT: Or does that only work for me because I have already got HardSPL?
yes it works..
the process goes, but only for 1 % . my phone reset itself and the notification on my pc says about invalid vender ID "this update utility cannot be used for your PDA phone, please check your update utility."
since the only stock rom that I found is .exe which is extract itself, I couldn't use The CustomRUU. Could this be the problem? or do I choose a wrong rom?
edit : I'm trying to install Factory Shipped ROM form HTC
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Do you know where to find stock rom for kaiser? most of the post about stock rom leads me to wiki xda, which is not available anymore.
thanks.
Not sure if these will work, but there are links to original HTC and ATT ROMs here
Also at the bottom of that post is a link to some reconstructed original ROMs
I have no idea if these will work any better than the one you've already tried, but it's probably worth having a go
thanks for the link..
I have visited that thread before, actually the 1st ROM that I tried to flash is also from that page. Both original ROMs for HTCor ATT doesn't works for my phone. But thanks to you I just realize the link about some reconstructed original ROMs.
Well, My phone is KAIS-100 which is made in Taiwan.
I guess I'll try Chinesse HTC 1.56.708.3.
I hope this one will make a progress.
-----------------------------------------
aww... still not working..
with reconstructed ROM, the process stuck at 0%, give me error [262] notification : update error. The manual said that if this kind of error occurred, I just need to do soft reset and run RUU again. I have tried several times even restart my pc first, but still not working.. any suggestion?
Try to flash radio. If you can't do it i think that you have messed up the bootloader
I can't...
the result is same, I'm trying to flash KAIS_Radinly_1701909 or KAIS_RADIO_ONLY_1710901_Custom, I got stuck in 0% with error [262]
The text in my bootloader says
KAIS-100
SPL-1.56.0000
CPLD-8
So, is there nothing else I could do if I have broke my bootloader?
No one can help me anymore? T-T
(running to the middle of the street and shout "why God, why??")
So, the lesson is :
If you are trying to flash back to windows mobile, DO NOT use factory shipped rom. Because it will modify your hard SPL and downgrade your radio version.
If the process failed and your hard SPL gone, you will get stuck in half working android without being able to flash anything, including correct your radio version, or reflash your kernel to fix your panel setting.
correct me if I'm wrong..
well, I hope my experience could be useful for you.
Thanks.
You can extract the exe file with winrar and you'll have all the files including RUU_signed.nbh
Rename it to kaisimg.nbh and copy to sdcard
Don't know if you can install from sdcard but since it's the shipped rom it might let you.
thank you salac..
I also have tried that method, using winrar to extract exe files.
but still, no luck for me..
Flashing via SD card got me stuck at loading screen, and I also tried to use custom RUU to flash the files via usb but my phone reset itself at 1% of the process and gives me error message [294] : invalid vender ID.
SOLVED
Finally
after days of yearning..
I found a suitable WM 6.1 ROM for my kaiser.
My phone is KAIS 100 HTC P4551. Usually, KAIS 100 model is for AT&T but mine is HTC branded, so that's why AT&T stock ROM won't works and my phone was originally shipped for US, that's why most of WWE stock ROMs always give me error 294.
So, basically I have to use HTC WWE ROM for US and this is really gives me hard time since HTC US website only provide ROM for AT&T.
In case you have same problem with me, I have uploaded the ROM at rapidshare
and you could find it here.
Now, I can flash a hardSPL, fix my radio version....
and flash back to android..