My phone backs up and resets overnight, and I woke up this morning to check email etc and noticed that the 4 hard keys on the front of the phone were all acting funny.. End key doesn't beep, send key didn't open the dialer, Okay button didn't close the current window.. then I found the PTT key didn't do anything either.. However, the Windows key DOES!
Hosed around for a while, launched AEButtonPlus to check it out, reset a few times, yanked the battery, etc.... Nothing. So I went back into AEButtonPlus to see what happens if I add a button and hit the Phone button and it pops up 00ED. Weird.. So I went looking into the HKLM\Software\Microsoft\Shell\Keys entries, looks fine as far as I can tell... Got curious and launched the Buttons preference, looks okay in there, except strangely the last screen for holding the End button has *no* selection, normally it has the two radio options, with more radio options below the second one, none selected..
So then I exit back out of the Buttons apps and are hosing around and find the buttons are magically working again. Soft reset, etc, all is fine!?
AEButtonsPlus got confused?? Nope, at some point I removed it from Startup and soft reset, was the same. And now that it's working again, all my settings in it are fine.
I am using QuickMenu attached to the Win key, so perhaps why that kept working?
Very strange.. At least it's back now, and I (think?) I know a workaround if it happens again, launch the Buttons preference.
This ever happened to anyone else?
same problemo
sabertooth said:
same problemo
Click to expand...
Click to collapse
Yours fixed by launching the buttons setting? I don't know if that's what fixed it, but it seems like it went away after that, perhaps a few more soft resets.
Related
I don't know if it's coincidence, but ever since I upgrade to WM5 and went back to WM2003SE, my navigation button has not worked the same.
For example, a lot of times I can go right, but can't go back left even after multiple presses, and then most of the time the middle or 'Enter' button doesn't do anything. Itz become extremely annoying because I have lost my 4th stylus by now, and I haven't received my new ones yet. Oh, and I can't play MorphGear right anymore.
Is it just hardware? Cuz I first went to ROM v.1.42 and then went to 1.40 to see if it was a problem with the new ROMs, but I still have the same problems. Any one else having these issues, and has any one fixed it??
UPDATE: WTF!! Now it went from bad to worse. Yesterday, when I left my BA at home, once I returned from work I noticed that PIE was constantly opening over and over again. Then some of the buttons wouldn't respond like the POWER to turn it off. The backlight pretty much stayed lit the whole time because it looked like the keys were stuck. I upgraded to WM5 derived from the Himalaya today and now the START menu comes up almost every 5-8 seconds, followed by a real quick succession of multiple "clicks", and my 'Start' button doesn't seem to be responding.
Can anyone help? Has my BA gone to the state of retardation? Is there a way to bring it back??
How did you go with this problem.
Mine is doing similar ever since a low battery problem.
DLC
I am experiencing the same kind of problem... and it happend after upgrade to WM5. But the problem likely to be caused by hardware.
I had problems with my phone opening up the start menu, opening IE, and closing programs immediately after opening them, Of course I had dropped the phone halfway in a cup of ice water, but immediately after tossing it in water (after hanging up, I simply dropped the phone into the cup-holder I have mounted below my stereo which happened to be occupied by a glass of ice-water I placed there without remembering) I shook the water out of the phone, and for about as much as i could stand the heat, I put a hair-dryer to the end of my phone which i pryed open after removing as many screws as i could. After a day of quirky behavior, and a night of having the battery seperated from the phone, my phone is back to its old self with the water-damage seal unnaffected after missing the line of water by just a few milimeters. I suggest going to Settings>Buttons and making every button perform no function at all followed by going to Settings>System>Button Lock and having all keys locked except your power button. Hope this helps!
Having somewhat the same issue. Only the "Down Navigation button" isn't working. Although, I'm still using Windows Mobile 2003 SE. Is there a DIY fix for this?
bump...
any suggestions?
Navigation Up/Down
Mine isn't working either - is this a hardware fault?
trying pressing down a bit harder. coz when i did that for mine, the "down" button works. normal applied pressure as for the rest of the buttons(left/right/up) does not seem to work with the "down" button, but a bit more force would make it work.
this happens to my IIs.. mebbe u can try.
Button problems
After no trauma or dunks in water several of my buttons have gone awry. My green phone button, red phone button and navigation buttons all open contacts. The green phone button activates voice command at the same time that it opens contacts. I've never switched from WM2003SE. I've checked the buttons settings and they are the same as always. Most bizarre of all is that my battery is quickly discharging. I suspect some software process is running hard but don't have any idea where to start to fix this. Soft resets have not helped.
buttons gone crazy
A hard reset fixed the problem but was a typical pain to get everything back going. Sprite backup works great until the first attempt to ActiveSync with your PC.
The keyboard on my TP2 (Verizon) intermittently stops working (no key press registers, however the buttons on the face of the phone still do). After soft reset it works again. This is with different ROMs. I'm thinking, perhaps, there is a loose connection internally. It also has odd crashes, but this might only be a ROM problem as it is much less pronounced with the latest ROM I'm using (Elite team ROM).
Diagnosis? I'm reluctant to send it into Verizon for just this, as its only occasional. Wondering if anyone has experienced the same thing
I'm having this same exact issue. I'm using the latest ROM from HTC. Sometimes when I open the keyboard in an app, like texting or email, the keyboard is genreally non-responsive. When it's in this state, the enter key goes to windows Apps but all other keys failed to work. I also test by pushing the FN to see if the FN light tunrs on.
What's strange with mine is the keyboard will work when it's open like for phone use, but when open with an app like text/email/bing, it doesn't...
Like previous poster, not sure if hardware ro what...
This may not have anything to do with your problem, but..
I have the PTT button on my tilt2. I have a case that wasn't designed to encompass that button, so it gets covered up (I had a find time finding a case that did actually fit!)
I have the PTT button assigned to do nothing, but with it being pressed down, it makes my keyboard non-responsive as well as disabling the arrows keys on my touchscreen. It will however work for a while after restarting my phone, but it always goes back to the same thing.
Sukuiku said:
This may not have anything to do with your problem, but..
I have the PTT button on my tilt2. I have a case that wasn't designed to encompass that button, so it gets covered up (I had a find time finding a case that did actually fit!)
I have the PTT button assigned to do nothing, but with it being pressed down, it makes my keyboard non-responsive as well as disabling the arrows keys on my touchscreen. It will however work for a while after restarting my phone, but it always goes back to the same thing.
Click to expand...
Click to collapse
Thank you very much for posting this. I do have the same exact setup, I have the PTT button unassigned and I too have a cover that covers it. So maybe it's pressing it down causing the problem.
I hope this is it and really appreciate your post...
UPDATE:
Sweet, I just checked things out. removed the cover and it would the keyboard doesn't go non-responsive when I push the PPT button, and works when I don't...
By George, I think you got it!!!!
GREAT!!!!
My Touch Pro 2 kept reverting to the TouchFlo home screen within a couple of seconds of opening other applications (eg. click on a new email, and a second later it goes to TouchFlo. Soft resets didn't make any difference: nor did disabling TouchFlo (from the Settings/Today/Items menu) - it then just reverted to the Windows home screen instead. So I tried to hard reset the machine. I read that the way to do it is to hold send+end+power, but that didn't do anything. Some posts suggested that volume down+reset was the way to do it, so I tried that. I've now got a tricolour screen, which starts:
RHOD100 32M MI-BC
SPL-0.84.0000
A bit more searching suggests that this is the bootloader (?) screen that comes up when you want to flash a ROM, and I feel dangerously close to doing something expensive and irreversible. Any suggestions as to how to get out of this screen? Nothing obvious when I search the forums here. I was thinking of just taking out the battery. And any thoughts on how to hard reset - or how to stop deal with the original problem?
Thanks
You ain't going to mess anything up. You can flash a new rom from there though but there is no way to do it by accident. Don't you hard reset by holding down the green and red call buttons and soft reseting? I remember it being different from the Touch Pro 1.
you might head over to the rom section, read up on the "flashing your phone for the first time" thread. Answer is most likely in there.
Thanks for coming back so quickly guys. The ROM flashing thread didn't explain how to get out of the tricolour screen. Meanwhile I just took out the battery and that did the trick. I still couldn't hard reset using the send+end+power buttons as instructed here and in the manual. I was able to get to the Settings/System/Clear Storage menu and was eventually able to keep it open for long enough to enter "1234". That hasn't dealt with the original problem, though - switching back to TouchFlo after a couple of seconds in each application. It's also beeping incessantly. Any ideas?
It sounds like your device is registering a phantom End key press every couple of seconds. That would explain it popping you out to the home screen and the beeping. If your End key is indeed acting weird, that would also explain why you can't hard reset using the power+send+end key combination.
You should send it in for warranty replacement...
ohyeahar said:
...registering a phantom End key press every couple of seconds...
Click to expand...
Click to collapse
That makes a lot of sense, thanks. Now that you mention it I realise that it's the same kind of beep and the same result as the End key.
I've only had it for 2 months. I'll get on to HTC.
on my tp2 i have the energy rom installed and set keyboardconfig to set the send key when held to go to a task manager the vol keys to scroll and hold to change volume but the send key just stopped working. it feels like im chacing problems round in circles with this phone where its one thing after another. i have advance config to have most things set to "recommended" re performance bu re the send key i disabled the kbdconfig and set "buttons" as none so theres no chance of a conflict but it just wont work. the best i got was sitting it for 5 mins without the battery in one time and it worked on a restart for a while. is there anything i have set wrong that im just not seeing?
im not getting to the bottom of this in fact the problem is worsening. menu and back key no longer do what theyre supposed to and they dont register in kbdconfig either. only the hangup button functions. i have tried memmaid in case it picked up a bad registry entry or something but nothing. Please help someone i am at a loss as to what else to try.
All of a sudden, the home button menu button, and sense pad stop working. At first it just started with the pad, and now menu and home. Back and Genius still works. I've read on about it, and wiped and reflashed, but nothing.
Edit: Wow, an hour after i posted this, the genius and back button stopped working. Yelp
Can anyone help? o.o
If reflashing and stuff doesn't do the trick, then it could be a hardware problem.
How could it be a hardware problem? It clicks when i press them. No water damage or anything.
the buttons can click all they want, but if the connections are bad, clicky button means nothing
Wow that sucks.
yup, better move fast and have your carrier replace it for you.
it happened to me, get a replacement
I dont have warrenty.