I've update the radio of my diamond p3700 but i've an error at restart
upgrade rom code error
please try again
how i can resolve it ?
Thx for our patience.
Flash back to another radio.
My guess is that you're trying to install a radio that needs your diamond security unlocked but your diamond isnt security unlocked.
you can verify if it is security unlocked by going into boot loader - if it is security unlocked it will say so on the top of the 3 colour screen.
What radio are you trying to use?
Radio v1.13.25.24 (Blackstone) (SU) (Quad Band)(NEW)
-Download here
HOW I CAN FLASH BACK ANOTHER RADIO ?
So, you're trying to flash a Blackstone radio to your Diamond
Is there a specific reason for this?
Here is a radio that is newer than the one you are trying to use and should work fine.
http://forum.xda-developers.com/showthread.php?t=545472&highlight=radio
Also, Why are you shouting?
my phone don't start
how i can upgrade the radio ?
thx
the program customruu don't find the phone
:°°°
ok
it's all ok
thx very much!!!
Ah, you found how to go into bootloader
AAArrrggghhh!!! Forgot to security unlock! Help!
endo75 said:
ok
it's all ok
thx very much!!!
Click to expand...
Click to collapse
Not for me, same problem, how on this earth did you do it???
Never mind, after 6 hours customRUU decided my phone had suffered long enough, oh well, no point going to sleep now, i'm at work in an hour. After 48 hours on the bounce, at least my baby is working again.
Related
Hi, after speaking to Midget_1990, I have patched the RUU for the Universal to allow flashing with any CID on your phone, this is the official Universal RUU (with a slight GUI mod by someone Midget_1990 mentioned)
so have at it... enjoy.
thanks, was just about to upload it
thanks,
just downloaded and have a try
allway said:
thanks,
just downloaded and have a try
Click to expand...
Click to collapse
it does work... just has the minor caveat that it'll try to flash a Universal when it's not actually plugged in... so try not to be a complete plank with it.
Olipro said:
it does work... just has the minor caveat that it'll try to flash a Universal when it's not actually plugged in... so try not to be a complete plank with it.
Click to expand...
Click to collapse
i have flashed my universal with the new RUU.
It works fine.
Olipro
Is it possible that you will make a HardSPL for Universal?
We still have no way to recover bricked radio...
we were discussing that earlier. the nogsm shows when the radio bootloader is not written to the device properly for whatever reason. its still early days but it may be possible to create a new radio bootloader that cant be overwritten so that problem wont occur. however it wont fix thoses who allready ahve the problem.
Skwyk said:
Olipro
Is it possible that you will make a HardSPL for Universal?
We still have no way to recover bricked radio...
Click to expand...
Click to collapse
ok, if you are flashing a radio, and you brick your radio, but not the radio bootloader, then you should be able to recover by reflashing.
if you brick the Radio bootloader, then unfortunately, there is no way for you to recover from this; possibly the only way of recovery is directly accessing the radio chip pins via whatever interface it is... perhaps i2c? and flashing on a radio BL again through a separate interface... meaning you then need a radio bootloader binary in the correct format.
Olipro said:
ok, if you are flashing a radio, and you brick your radio, but not the radio bootloader, then you should be able to recover by reflashing.
Click to expand...
Click to collapse
Not in 100% of the cases... there are some situations where the radio bootloader is intact, but the radio is screwed, this causes all bootloader commands that require radio seclevel to be queried to hang the device (like 'task 32' or 'info 2'), thus not being able to flash it with the usual RUUs.
If this happens, it can easily be fixed with hermflasher by flashing the raw radio without prior authenticating to bootloader.
Olipro!!! am having No GSM here!!!
Dear Dr. PDAs
My Universal is suffering for bad blocks of Radio ROM i guess.
it Says NO GSM when boots.
Boots WIN CE very well
can't flash radio rom.
Please tell if we could have HardSPL for Universal or is there any other way to recover it...
waiting.
farehmani
hi everyone i m in need of new rom for my XDA Exec Universal plz help me as i m ver new.
V1640 and flash rom radio problem
hello,
On my V1640 my radio rom is version :0.00.00, and I can't flash it with a newradio rom. It is probably a CID Lock problem, How works Universal RUU ?
Is there a tutorial for flashing with Universal RUU ?
thanks
Regards
Has anyone got anywhere to fix problems with radio mess ups I have an O2 XDA Exec and loads 2.05 ok but error when flashing any Radio. Tried all I can find but no luck
simpleparab said:
hi everyone i m in need of new rom for my XDA Exec Universal plz help me as i m ver new.
Click to expand...
Click to collapse
Try to serch forum
Or, for lasy people try my folder blow
Flashing radio rom Ok !!!
I flashed the radio rom on another PC.... It works fine.
Try this..good luck
Flashing the O2 original ROm with this RUU
Hi,
Can i use this RUU combined with the original ROM from O2 to flash?
My current ROM:
ROM 1.13.82
Radio 1.04.02
ExtROM 1.13.188
New ROM available:
ROM 1.30.107
Radio 1.09.00
ExtROM 1.30.162
I have to use the bootloader mode to flash the new ROM because my XDA Exec has problem on connection with my PC via Active Sync. My Xda just dont sync with my PC where there is no connection established.
Hopefully someone can tell me what is this RUU? Whats the different than the original?
bejoa said:
Flashing radio rom Ok !!!
I flashed the radio rom on another PC.... It works fine.
Try this..good luck
Click to expand...
Click to collapse
this is the second time ppl have been able to flash no GSM Universals by using a nother PC. What was the spec of this pc and what was installed and Not installed in it.? I really want to unbrick my Universsal
I flashed my universal on a Laptop :
Gericom Select 2580+
AMD 2500+, 512 Mo ram, 80 Gb HD,
Windows XP Home SP2 pack
ActiveSync 4.2
Universal RUU
nothing special installed...
Good luck
bejoa,
what was the boot loader version of ur universal?
It is version 1.0
Hi Guys,
I need to send my vario ii back to tmobile (for the 5th time now ) but as ive got JJ's Black 2.5 on it, i dont suspect they are going to be very happy and void my warrenty.
Is there a way to put it back to exactly how it was when it came out the factory (or good enough so they cant really tell) for me to get a replacement?
Thanks
Jas
- If u have radio bootloader >=0108, you can put everything back except the radio (when you flash a radio with 0106 on it, you'll get a NoGSM error).
- If u have raido bootloader <=0107 you can put everything back.
is that the IPL or the SPL?
Thanks for your help
jaso2005 said:
is that the IPL or the SPL?
Thanks for your help
Click to expand...
Click to collapse
Read the Wiki...... it is the radio bootloader (so not the IPL or SPL....)
Have fun,
HJ
Yer looks like im gonna have fun, i only found 1 T-Mobile factory rom which was the hungry one. Does anyone know of another one as id like a UK one if poss, i know the hungry one is WWE but would just prefer a UK one.
Thanks again for your help guys
The same question was asked here: http://forum.xda-developers.com/showthread.php?t=302412&highlight=t-mobile
Check out the last post... it might be what your after
cheer fella will give it a try later on.
Jas
pof said:
- If u have radio bootloader >=0108, you can put everything back except the radio (when you flash a radio with 0106 on it, you'll get a NoGSM error).
- If u have raido bootloader <=0107 you can put everything back.
Click to expand...
Click to collapse
Are these installed when new radios are flashed?
Radio 1.40.30.00
or
Radio 1.41.00.10
Thanks
yes, both have 0108.
So what's the latest+best radio for TMOB UK, which also allows the device to be restored to its original state? I want to upgrade but I still have warranty left! I gather the 1.05 radio it shipped with is not the best.
Help
Have read as much info as i can about bricked phone.
Have no radio working shows no gsm on boot
It apears that i can flash to any rom with out a radio, if i flash to one that includes it its stops at 11 - 13% and comes up with an error message 262.
have olipro 2.30 and hardslp7
if i try to flash radiio rom only it wont and stays at 0% until errror message 262
so its a 1a
but not having any luck
please help as this was my dads phone
its an orange spv3100/ herms 100
try reinstalling a stock rom. might work but if you cant install a radio it looks like you have a nice pda but not a phone anymore...
No Not really
The only reason i was having to reflash the phone was that it was locking up all the time, even having flashed the phone it was having problems with Tom Tom.
Please HELLP!
Can some one please advise me on this situation,
is there any way of sorting this out?
stock orange m3100 rom wont flash
Just tried standard orange m3100 rom
it stops at 12% and wont continue,
seems any rom with a radio wont flash past 12/13%
any radio free rom is fine
it wont flash radio only roms
PLEASE HELP
Have you tried flashing radio only?
photoscubaman said:
Just tried standard orange m3100 rom
it stops at 12% and wont continue,
seems any rom with a radio wont flash past 12/13%
any radio free rom is fine
it wont flash radio only roms
PLEASE HELP
Click to expand...
Click to collapse
Have tried radio only roms,
they wont work at all and stays at 0%
have olivpro 2.30 and hardspl7
thought this was ment to prevent bricking?
no, it improves chances of recovering a brick but wont stop it from happening. It loks like your radio is corrupted. You might have to bite the bullet and tell your dad his phone no longer works... sorry for the bad news...
have you tried flashing a rom with radio included through yur sd card. had same issue and this worked for me.
If ya can't install a radio, sounds like your stuck with a pda and not a phone.
Have you tried a number or radio's?
As ultramag69 says
no, it improves chances of recovering a brick but wont stop it from happening. It loks like your radio is corrupted. You might have to bite the bullet and tell your dad his phone no longer works... sorry for the bad news...
Click to expand...
Click to collapse
using hardsplv7 improves chances of recovering, but nothing is 100%
If you flash your phone with manufacturers rom and get everything back to original, see if orange or manufacturer will fix it under warranty or insurance. THIS IS A LAST RESORT AS IF THEY DIG DEEP AND KNOW YOU HAVE MESSED WITH PHONE, THEY'LL DO NOTHING FOR YOU!!!
Personally I have returned phone once due to not being able to receive or make calls. I flashed original rom etc but forgot to put original radio back on. They never noticed and I got my phone back fixed. But this is a BIG RISK.
have now managed to get spl 1.01 on the phone
trying to change to spl 1.04 and reflashing!
however now when i task 32
it has
level FF not Level 0???
any ideas??
shamless bump
Isnt there anybody that can help me?
please
photoscubaman said:
have now managed to get spl 1.01 on the phone
trying to change to spl 1.04 and reflashing!
however now when i task 32
it has
level FF not Level 0???
any ideas??
Click to expand...
Click to collapse
Ditto.
Is there anyway of fixing the corrupted radio? is there no way to "re-write" the radio bootloader?
obviously the radio bootloaders have changed over the different versions of the roms so why cant we "re-construct" the bootloaders in this fashion?
Referring to :HERMES Bootloader 1.01 MFG (WIKI) I cant use the "Flashing SPL-1.04 again" method because my radio is corrupted, so, I lose SuperCID, and don't have access to the lnb command; is there a SPL-1.04.nbS that we can use?!
If there is, would it allow us to use a radio of that version? or is this mute?
I've read several threads and the wiki several times, but, it seems this corrupted radio issue is something new that the wiki's are partially addressing, or, whatever has caused the radio to suddenly become corrupt requires a new method to fix it.
I know i've said I've read the forums, wiki, but perhaps I've missed something? Any assistance is appreciated!
I was wondering if any body had spl 1.04 on their mini sd card?
the method were you just transfer over to the mini card and click on it.
i managed to change my boot loader to version 1.01 this way.
if i can change it to 1.04 can i flash to radio with out it stopping.
thanks
just solved exact problem
Hi
i have been dealing with the same problem for 4.5 hours finally with the help of wiki and pof 's posts i managed to unbrick radio.
first of all i tried almost evceryting. i finally succeed by reseting radio sector. i used mtty to gel into hermes and used commands of one of pof's posts for erasing radio sector.
i dont remember the link but google xda for it. then i flashed tweaked version wich is inclueded in unlocker by pof i aborted the operation in unlocking phase then installed hardspl7
i can use my phone now radio version is 1.10 sth but i didnt tried to install newer radio ( too tired :=) )
i hope it is usefull if anything not clear PM me or write here....
PS:Many many thanx to pof...
bartan
bartan said:
Hi
i have been dealing with the same problem for 4.5 hours finally with the help of wiki and pof 's posts i managed to unbrick radio.
first of all i tried almost evceryting. i finally succeed by reseting radio sector. i used mtty to gel into hermes and used commands of one of pof's posts for erasing radio sector.
i dont remember the link but google xda for it. then i flashed tweaked version wich is inclueded in unlocker by pof i aborted the operation in unlocking phase then installed hardspl7
i can use my phone now radio version is 1.10 sth but i didnt tried to install newer radio ( too tired :=) )
i hope it is usefull if anything not clear PM me or write here....
PS:Many many thanx to pof...
bartan
Click to expand...
Click to collapse
This link you speak of is of high importance!! what were the commands? what was the link?
http://forum.xda-developers.com/archive/index.php/t-280372.html
but after installing radio 1.47 it happened again in one call.
still in square one ....
No SD-card install works (stucks in GSM)
no shipped rom works
i want to ask if there is anyway to erase the whole radio sector ??
rerase command did not work on my hermes may be pof has some solution to this.
bartan
After lots and lots of reading the wiki's and forums over and over again I believe I may have solved the radio corruption problem on my 8525.
Just to let everyone know that I've tried flashing several SPL's; 1.01 MFG, 1.04, 1.10 Oli, 2.10 Oli, 2.60 Oli. Back and forth between the versions but finally I stayed put at 1.10.
I have/had a type 1a brick, but, not from flashing, everything was working great and then it just died. I tried Method 1 of Problem 5: Device shows NO GSM when booting more times then i would like to remember, however, nothing worked. When i tried a Radio only flash it failed at 0% and when i tried a FULL RUU it failed at 12/13% (GSM.nb). Convinced I had a $500 paper weight I got angry tried Method 2 of Problem 5 (see above link) ... strangely on the first try i was able to see the radio (1.40.30.00) and the protocol version as well...
I then thought this was too good to be true and then soft-reset my phone; BAM! "NO GSM".... I tried several times and then finally got the version readouts again... So i soft-reset into bootloader mode
Code:
typed: info 2
returned: HTCS
typed: task 32
returned: Level = 0
typed: rtask b
returned: AT-Command Interpreter ready <--------- YES!!!
I was then able to get enter the AT/Radio Commands so i did what anyone else would do.... FLASH ANOTHER RADIO!!!
I flashed the Radio from HTC_Hermes_SIM_Unlock_v2a and it just finished... I got an error at the end, and after the soft-reset the version stayed 1.40.30.00, but once booted into WM6.1 it immediately picked up the 3G signal... I hope this lasts longer then others have reported.
Should i try to flash another radio that is radio_bootloader 108???
*sigh* ... froze in WM6.1 reset then "No GSM" again... so then i tried HTC_Hermes_SIM_CID_Unlock_v3a but it failed because I kept getting No GSM; so i did the battery trick to get version info's then ran the .bat as instructed and it perfomed the unlock; this time it reflected the radio 1.16.0.0
since I know what it takes to get the radio to flash, i'm trying RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe ..... i mean what do i have to lose right?
[EDIT] it worked... so lets see what happens.... [/EDIT]
[EDIT2] Radio is 1.54.07.00 & Protocol is 32.86u.7020.23H ... so it looks like its perm now... I've been able to send and recieve calls now too.... [/EDIT2]
after several hours of usage, radio no longer responds and WM becomes unstable and after a soft-reset I get "No GSM" ...
Question to Olipro, Des, pof:
Is it possible to log the beginning bootup screen to see what exactly triggers the "No GSM" vs the radio/protocol versions?!?! there has to be something that were missing... it would seem ever since radio 108 this problems have arisen... comments?
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
paulmurphy777 said:
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
Click to expand...
Click to collapse
...unfortunately no ideas, just the same problem described here already: http://forum.xda-developers.com/showthread.php?p=2927161#post2927161
paulmurphy777 said:
I have a gsm diamond (from t-mobile uk) and have flashed it to 1.34 hspl to use the new 25.16 radio and dutty's v3.1 both are working fine however I can't *upgrade* (i know it's not an upgrade per se) to hspl 1.93. it's stuck on 1.34.
using customruu it goes through the normal motions and on screen shows it to 100% then restarts etc, but after i check by going into the bootloader it hasn't updated. I have looked about and search for some time now and don't see anyone expericencing quite the same thing.
any ideas??
Click to expand...
Click to collapse
I have the exact same issue... I tired updating it from 1.24 to 1.93 and it restarted like it updated it. But when I go into boot loader its still got the old hardspl.
Does anyone know why??
I have tried searching around for a solution but no luck
I'm no noob and i've flashed 100's of times across many fones and unbricked a few with some careful reading but this seems very odd and stupidly simple. No idea what i'm missing.... only thing i can think to try is to flash from internal storage, but i would think this unwise with the hardspl as I thought hardspl would control access to the internal storage like some sort of bios perhaps?!
Same here
Hey guys,
Does anyone knows what is the resolution for this? I having the same problem as well.
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
gladiac said:
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
Click to expand...
Click to collapse
i have almost same problem but the only difference that my Diamond don't have hardspl on it and whenever i try to flash any hardspl phone stops at 0% and stays there for a long time....I want to change my Diamonds language...So can anyone suggest me solution.....I have already posted here on forum but no answer yet!
http://forum.xda-developers.com/showthread.php?t=749664
Another little question that how i can flash hardspl via internal storage and where its root???Root is the device path which we seen as drive in computer when we use mass storage or any other?
gladiac said:
Hi guys!
HSPL blocks write attempts to the SPL-part of the nand! You need to run SSPL from windows mobile and then flash the HSPL-Version you want. This is pretty much the only way to override that write-protection!
cheers
chris
Click to expand...
Click to collapse
Thank you. used this and it worked
Hi everybody,
got yesterday another diamond, after mine died some time ago. It has 193 spl and I cannot upgrade to olinex spl. It runs through everything, but upon reboot it still has the original 193 spl. Any ideas? I really need to flash, mine speaks Dutch and I want it in English. Please help. Kind regards. Ben
Hi i have a HTC TD device and I am traing to update rom from 1.93.401.2 to 2.03.401.2 but not sucssesifuly and at the end of update update utility shows this massage : 270 update error , the image file is corrupted, please check youre update utility.
This is frustrating because i tried all possibilities to fix a problem and still nothing, does anybody have any expirience with something like this to help me thanks a lot.
have you tried downloading the rom again?
Is your device locked by provider? If yes, you have to hardspl.
nickytheshaft said:
have you tried downloading the rom again?
Is your device locked by provider? If yes, you have to hardspl.
Click to expand...
Click to collapse
Yes I have tried all available posibilities : Hard Reset, changeing radio, and it is not locked by provider because first time i was sucssesifuly updated and then i saw olinex and i instaled that one after olinex there is no way to instal 2.03.401.2 I think that olinex is my problem but i do not have any idea to remove it because i have tried all available options and this is my 5th day that i am fighting with that and still i did not find any solution but anyway THANKS A LOT and get back to me soon if you know how to resolve this.
Diamond-HD said:
Yes I have tried all available posibilities : Hard Reset, changeing radio, and it is not locked by provider because first time i was sucssesifuly updated and then i saw olinex and i instaled that one after olinex there is no way to instal 2.03.401.2 I think that olinex is my problem but i do not have any idea to remove it because i have tried all available options and this is my 5th day that i am fighting with that and still i did not find any solution but anyway THANKS A LOT and get back to me soon if you know how to resolve this.
Click to expand...
Click to collapse
I seem to remember that error 270 means that you need to udate your bootloader, Try flashing an updated HardSpl.
And remember olinex has two spl's, one for gsm and one for cdma, they are not interchangeable.
thanks
Thank you i solved my problem i have know that olinex is for gsm and cdma i am fixed with hard spl 1.34 and now work perfect and after this long problem resolving now i know everithing about rom because i have try everything THANKS A LOT AND STAY GOOD AS WHOLE THIS SITE IS THANKS AGAIN
Error 270 when flashing to 2.03 stock firmware
I had the exact same problem. I went out on a limb and try something different and it worked! When you have just completed a fail upgrade (you see the 3 colored bars on your phones screen) quit the firmware update software, soft reset phone, re-connect to computer, and immediately flash to hard spl 1.34 signed. When finished the phone will reboot to and viola, you will have the latest firmware installed. At this point you can put back on the latest spl (1.40 I think) so that you can load custom ROM's. Just remeber if you want to get back to the latest stock ROM from HTC you have to rollback to the 1.34 SPL. Hope this helps peeps.