Related
When i'm in the car i want to get my spvM650 automaticly on speaker when i answer calls... is that possible?
...sort of...
I have a prog installed called Teksoft Speakerphone. This allows a button to be allocated to turn the speaker on.
You can even activate it without a call in progress so that it will answer on speaker. I use it all the time in the car.
It also comes with a today screen button type plugin - but as far as I can tell its completely and utterley useless....but the prog itself rules!!!
I have attached the cab - let me know how you get on....I know it works on my Orbit....
chandlercjh said:
I have a prog installed called Teksoft Speakerphone. This allows a button to be allocated to turn the speaker on.
You can even activate it without a call in progress so that it will answer on speaker. I use it all the time in the car.
It also comes with a today screen button type plugin - but as far as I can tell its completely and utterley useless....but the prog itself rules!!!
I have attached the cab - let me know how you get on....I know it works on my Orbit....
Click to expand...
Click to collapse
Thanx very much, just dl'd. Will install tonight and let you know. many thanx
Installed and working great... many thanx for the app.
Great app! Thanks for sharing.
I've been looking for an app like this for a while thanks.......
One question. How do you toggle it off once you've selected it ??
Gilgamesh1066 said:
I've been looking for an app like this for a while thanks.......
One question. How do you toggle it off once you've selected it ??
Click to expand...
Click to collapse
thats the only flaw I can find......it turns itself off once you have ended your phone call.
During a call you have to turn it off using the button in call status.
Its good for turning the speaker on - just not for turning it off again....you soon get used to it!!
Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF
Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!
I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.
Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!
Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF
Hi Guys,
Ive got a few BT niggles which im sure are easy enough to get round when someone starts getting some custom roms out but i cant seem to find a way around them at the minute, issues are:
- When phone is in standby (aka screen off) and you try and make a call via bluetooth car kit it turns phone and on says please unlock before making a call, if i turn the screen on before making the call it goes through.
- When you disconnect from car kit aka turn the car off etc it comes up with a notification and says its been disconnected and to hold the phone to your ear, this doesnt go away until you press dismiss.
None of these problems are show stoppers by any means but they are annoying when you just want to get in / out the car and making calls etc, aka i cant just get in the car and make a call, i have to turn the screen on first, and i cant get out the car and carry on as ive got to press dismiss on the screen as it keeps the phone switched on (screen on) until you press dismiss so i could accidentally press buttons etc plus will wear battery down.
If anyones managed to work these problems out then please let me know!
Cheers
Jas
Voice Command V1.6
Hi Guys,
I also have a problem with bluetooth... well voice command.
I had the TYTN 2 with WM6.1 working perfectly with VC 1.6 and so naturally assumed that TP2 would be the same, sadly I was wrong :-(
It doesnt even try to use the software, bluetooth connects perfectly but I cannot initiate VC with the usual hardware button.
Does anyone have any ideas?
jaso2005 said:
Hi Guys,
Ive got a few BT niggles which im sure are easy enough to get round when someone starts getting some custom roms out but i cant seem to find a way around them at the minute, issues are:
- When phone is in standby (aka screen off) and you try and make a call via bluetooth car kit it turns phone and on says please unlock before making a call, if i turn the screen on before making the call it goes through.
- When you disconnect from car kit aka turn the car off etc it comes up with a notification and says its been disconnected and to hold the phone to your ear, this doesnt go away until you press dismiss.
None of these problems are show stoppers by any means but they are annoying when you just want to get in / out the car and making calls etc, aka i cant just get in the car and make a call, i have to turn the screen on first, and i cant get out the car and carry on as ive got to press dismiss on the screen as it keeps the phone switched on (screen on) until you press dismiss so i could accidentally press buttons etc plus will wear battery down.
If anyones managed to work these problems out then please let me know!
Cheers
Jas
Click to expand...
Click to collapse
I had the same problems - in an Audi A6 for what it's worth. On my TP2 had both a PIN device lock and the option to show owners info when switched on.
Disabled both of these, and it now works perfectly in the car. Not quite sure which was causing the problem and may reinstate PIN followed by Show Owners Info to try to isolate.
TP2 Brilliant phone - have been using a TyTn2 for the last 18 months or so which I also thought was exceptional.
desperately seeking BT DUN
Hi all,
I am missing to be able to connect my TP2 via Bluetooth to my Nokia mobiles (N73, 5800) which do not provide PAN or NAP profiles but only DUN.
I need to use the SIM-card in the Nokia for the data-only connection whilst using the SIM-card in TP2 for phone-only connection.
I tried all the tricks in this and other forums. Unfortunately the most promising approach ("New installation file for Bluesoleil drivers! " - http://forum.xda-developers.com/showthread.php?t=251995) doesn't let me download the file.
Who got it to work? Who knows how to enable in the TP2?
thank you, Franky
As above...
Anyone has any ideas on this?
if your rooted just delete android_audio.mp3 from either /system/customise/resource/ or/data/local/
Nah, not rooted here.
bryant_16 said:
Nah, not rooted here.
Click to expand...
Click to collapse
you can't do it then, on stock roms the boot up sound is in /system/customise/resource/ without root, you have no permission to edit the contents of /system though
bryant_16 said:
As above...
Anyone has any ideas on this?
Click to expand...
Click to collapse
Put your phone in silent mode and turn off your phone and turn on.... Or remember to put your phone to silent mode before you restart
sphuyal said:
Put your phone in silent mode and turn off your phone and turn on.... Or remember to put your phone to silent mode before you restart
Click to expand...
Click to collapse
That doesn't work
I have a HTC Desire HD with the official HTC ROM 1.72 (installed withe the RUU .exe) and there is always a very noisy sound at start up
I just made the test . i put my phone in silence mode and i check in stetting that all the volume are to 0 (Ring, Multimedia, Alarm and notification). Then i turn off the phone. Then i turn on the phone ant the noisy ring of HTC is still there on a start up. Good luck if you are on a work meeting and you need to turn on you'r phone -> impossible to do it quietly.
vvander said:
That doesn't work
I have a HTC Desire HD with the official HTC ROM 1.72 (installed withe the RUU .exe) and there is always a very noisy sound at start up
I just made the test . i put my phone in silence mode and i check in stetting that all the volume are to 0 (Ring, Multimedia, Alarm and notification). Then i turn off the phone. Then i turn on the phone ant the noisy ring of HTC is still there on a start up. Good luck if you are on a work meeting and you need to turn on you'r phone -> impossible to do it quietly.
Click to expand...
Click to collapse
try it with the media volume not the ring volume
I try it with all the 4 volume to 0 : Ring, Media Alarm and Notification.
Noisy HTC musique still there at start up.
Silent Boot form Androidi Market doesn't work on my HTC Desire H neither.
I think my only chance is to wait form a offical rom update from HTC... i can wait
I have the same problem. On 1.32.405.6 there wasn't the sound when the phone was in silent/vibrant mode. But on 1.72.405.3 there is the sound.
I have installed Clockworkmod. whn i click on RECOVERY BOOT inside CWM, my motorola reboots & after showing up RED moto logo it freezes on a BLANK SCREEN.
If i boot manualy by holding down Power on + UP vol. key.. it shows me deafult boot menu.. But it doesn't show Clockworkmod Boot window.
But how do i install this call_recorder.zip in my Motorola Defy ?
http://forum.xda-developers.com/showthread.php?t=994570&highlight=call+recorder
I want a call recorder that will record both sides voice.. and not only incoming voice. Im NOT using Chinese rom.
im using MB525 (Defy) 2.2 Froyo, rooted.
bump.. help please
can any make a Defy app like this http://forum.xda-developers.com/showthread.php?t=806451
i solved this problem.
I just had to SET USB Debugging OFF.
Thank to this > http://forum.xda-developers.com/showthread.php?p=15976080#post15976080
And what do you have working call recording ?
yes im using audio files from Chinese rom. My phone used to record only incoming voice, but not mine.
Now it records my sound as well without needed to keep phone on speakerphone.
Im using Total Recall to record calls.
Hmmm ... interesting , I'll try it soon .
With or without beeps?
shorty66 said:
With or without beeps?
Click to expand...
Click to collapse
its without beeps, during the call just press "4" on dial screen to mute the BEEP sound.
SteeLx said:
yes im using audio files from Chinese rom. My phone used to record only incoming voice, but not mine.
Now it records my sound as well without needed to keep phone on speakerphone.
Im using Total Recall to record calls.
Click to expand...
Click to collapse
Hi,
Interesting subject indeed.
If I install only the zip from the OP, I will not be able to record; only with that other apk installed - right?
If so, it might be less interesting to have to start an apk (or leave it running) to record calls. That was part of my Chinese stock Froyo dialer: just one button touch for 2-way record...
But I've long left Froyo for CM7.
I will try this with cm7 soon.
Can the recorder be altered to mute the beeps right away without pressing '4' ?
Edit: Tried, but doesnt work due to a wrong Update-Script.
Could anyone try to make a new zip with the ne "Edify" scripting out of this one?
Edit2: i just converted the script myself. Seems to work, just booting.
those libs r from froyo Chinese. Dont if it work in CM7, u shud ask author.
I converted the script but after install i had a bootloop. Perhaps i missed something with the defy's mounts.
is it work on CM7 or MIUI ? i need call recorder, if it don't work on CM7 or MIUI, i will back to froyo
No, not yet. So stay on froyo.
Yes, i would like this on CM7 too, i added it up in the main CM7 thread to the devs but no response, lets post there to get the devs attention.
remove 10 second beep automatically with tasker
hey guys, not sure if someone has posted this already, but
To get rid of the beeps every 10 seconds AUTOMATICALLY, i used the Tasker app to auto press a button after 3seconds.
tasker can detect that the phone has just started a call, and then will execute any action, e.g. press a button or send a keystroke or even start recording audio.
Tasker setup:
Task Context type: Event -> Phone -> Phone Offhook (priority = normal)
Task Actions: Wait (3 secs); Type ( "*" )
this just waits for 3 seconds after (incoming or outgoing) and then presses the asteriks key to stop the beep from happening.
I use total recall to auto record all incoming and outgoing calls.
sometimes this doesnt work, id say 70% reliable
maybe someone can check out tasker and find out a more reliable way of detecting the phone call is ringing and thus send a key press to the dailer app and not just to the currently focused app window.
i'm back to froyo for use call recorder funtion, but i install total recall, it not work, it only recorde 1 way in or out, not 2 way. who can guide me setup total recall for this funtion, thanks