Hi guys,
Just flashed a new version of EnergyROM. After flashing, the device is stuck in the screen "please wait while your device is being setup blablalbal".
The problem right now is, i cannot connect through active sync with my pc, so i'm not able to flash a stock Rom for instance over this rom. I have already done hard resets etc, nothing helps.
The only option is to flash a new ROM over this one, but i have to do it over active sync i guess, but i cannot connect
HELP
use MTTY to format and reinstall =)
http://forum.xda-developers.com/showthread.php?t=540290
BTW, i dont get that MTTY thing, i totally dont understand it
I get this screen right now:
The problem is, can't connect my device to the pc! There is nothing i can do!?
WHA!
I press and hold the VOL down button and reset button. Then my device was connected through USB, finally! Now just flashing
DAMN, i was worried that my device was bricked
Sleehond said:
WHA!
I press and hold the VOL down button and reset button. Then my device was connected through USB, finally! Now just flashing
DAMN, i was worried that my device was bricked
Click to expand...
Click to collapse
Yes, Correct...this is called the BootLoader mode. Congratts on making it work again!!
Sleehond said:
BTW, i dont get that MTTY thing, i totally dont understand it
Click to expand...
Click to collapse
I had to find out the hard way how to use MTTY, almost bricked someone elses device... but got it back thanks to MTTY.
It's not as hard as it looks. Had to use it on my own device now too (flashed to many different ROMS), and all worked out well.
If you ever have any problems again, pm if you want...i'm dutch.
Related
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
I've been hacking dash' for a long time now... my friend gave me his phone to hack...
Thought it was easy...
I mustv'e messed something up... now every time i boot my device up it gets stuck on the screen with three colors... red, green and blue one
i have try hard resseting it - two soft keys power button...
i have tried leaving the battery out... no good
any help would be greatly appreciated
the tri color screen is the bootloader. you need to use that to flash back to a stock rom, then try to flash again.
because I am stuck on this screen my phone will not connect to the computer and sync... what should I do?
Nano3 said:
because I am stuck on this screen my phone will not connect to the computer and sync... what should I do?
Click to expand...
Click to collapse
Turn the damn thing off.
Press and hold in the camera button.
After 10 secs or so, plug in your USB cable.
You can now install an Official, (from your provider), ROM available at a Sticky near you.
Once an official ROM is back on, you can continue with your evil plans.
You have to use an OFFICIAL ROM first.
thanks for that help... i did as i was told, advance to a white screen where it said "checking sd contents" still not being able to connect to my computer via activesync so i can run the original factory rom
Remove your SD card prior to flashing. It's really a very simple process man, so if it's not working for you, you're making a rather minor mistake. Just follow the information in the stickies. You may even find a video on Youtube of someone flashing from the bootloader. Oh, and if you'd read the stickies, you'd know that you don't need to connect via activesync when in bootloader mode. The PC should automatically connect and install whatever driver it needs to communicate with your phone so you can flash.
right now my dash, when powered on, will just display a white screen.. when doing a hard-reset...nothing happens, when trying to do to the bootloader thing,the tri-color thing doesnt show but the computer does detect the dash...so i tried an update to stock...and it said that instalation was successful,alltho it was not
IceNova said:
right now my dash, when powered on, will just display a white screen.. when doing a hard-reset...nothing happens, when trying to do to the bootloader thing,the tri-color thing doesnt show but the computer does detect the dash...so i tried an update to stock...and it said that instalation was successful,alltho it was not
Click to expand...
Click to collapse
Welcome to the forum
Have a read here:
http://forum.xda-developers.com/showthread.php?t=397583
And:
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
i thank you for the swift response,but im sorry to say that those two posts dont help me in the least bit...i fully understand the upgrade process, im just having some technical difficulties that i cant figure out, but please if there is anymore information that i can offer,feel free to ask... im kinda phone-less until i can solve this problem
how about these essages
you tried plugging it into the computer while holding the camera key? also how about the normal press two home keys and cycle the power button? If these dont work PM me and I will help you out. When you use the bootloader make sure that you are flashing back to a tmboile rom
Hi guys,
Can anyone help me here ?
When I try to start up my Phone, it always loads the bootloader ...
I tried running reflashing a rom and task29, but no help there :s
Does anyone have an idea what to try ?
Tnx
Nick
Some people with the same problem said that their batterie was broken. Can you try another batterie?
I'll give it a try
Will let you know ...
Lennyz1988 said:
Some people with the same problem said that their batterie was broken. Can you try another batterie?
Click to expand...
Click to collapse
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Trickass said:
Nope, doesnt help.
Tried with a friend's battery, and have the same result.
Also tried using his phone with my battery and worked perfectly.
Any other ideas?
Click to expand...
Click to collapse
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
MCbrian said:
Just to ask: You're not (accidentally) holding down the volume key when you press the power key (or reset) to turn on, are you? That puts it into bootloader.
Click to expand...
Click to collapse
No, I'm not doing that
I thought maybe it got stuck though, something like that :s but when I do press it, I hear a pretty clear "click", so I guess it's not broken at all...
Also, I noticed that when I try to reflash a ROM, the "current image" (or whatever it's called) is blank ...
(I mean the thing that sais the version number of the currently installed rom)
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Same issues.
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
ultramag69 said:
Okay, sounds dumb I know, but did you flash a new rom after flashing Task29?
It is used to wipe the OS out completely BUT you then have to re-install a new OS...
Just thought I'd ask.....
Click to expand...
Click to collapse
Lol yeah I know that
Thanks anyway
Frederic.james said:
Same issues on my touch pro 2.
The only solution i find in order to make it boot is with mtty on a Windows xp pc with no activesync.
Perform a
set 14 0
task 8
then the phone boot on the os but on the next reset stay in bootloader !
Click to expand...
Click to collapse
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Trickass said:
Lol yeah I know that
Thanks anyway
Hm, I'll see if I can find a Windows XP pc somewhere and try ... MTTY doesn't seem to work with Win7 x64
Click to expand...
Click to collapse
Hummm i have see somwhere a howto for mtty on W7... but i'm a little lazy i have choose to do this on a old windows xp
But this command are just temporary i'm searching for something more stable !
Some news from my Rhodium Stuck in bootloader
I have try to Hardspl it (Olinex 0.85)
The good news is i have manage to do it, the bad news is after that even the
set 14 0
don't manage to make it boot.
After a while searching, (thanks wiki of another phone) i have find those command :
password BsaD5SeoA
set 14 0 # Maybe it's usless now but in fact i don't know
set 1 0
task 8
And now i'm back to my start....
I tried using the MTTY commands, and when I did it the first time, the phone booted and performed its "first run setup" thing.
After rebooting though, it went back to the tricolor screen, and I can't get past it anymore, even with the same MTTY commands ...
Any other ideas ? :/
mtty, a lot of post on the internet...
hi,
I think we are a the same point !
I have find a way to start a boot with the HTC screen but the phone tel me that a txt file is missing on the sd card ???!!!???
with mtty :
boot
yes it's quite simple why i haven't think of that befor i don't know... but that didn't solve my problem at all.
I have send a mail to HTC in order to have a diferent point of view but all they said to me is doing a hard reset (who didn't do anything...)
I will post the avancement of my test but i feel a little stuck.
Note : After searchin on the internet, the set 14 0 tel to the phone to boot on the os after a flash (sometime the phone don't reconize the end of flash)
the set 16 0 (or set 16 1) disable (or enable) the RUUNBH tag on boot loader.
More Infos...
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Frederic.james said:
I have find a post on a other forum whos said that a defective battery could result to an unstable beaviour of the phone.
I have let it without battery for a day and, today it has directly boot on the OS.
I have ordered a battery on ebay and waiting for it maybe the solution ?
Click to expand...
Click to collapse
Oke, I will try to take out the battery tomorrow as well ... Although, I tried using a different battery and it didn't help ...
Right now, I managed to boot using mtty set 14 0 > task 8, which seems to work
(sometimes, I need to do the task 8 twice in a row ...)
So as of now, I managed to flash a stock rom onto the phone, and only have to try and reset hardspl back to stock as well.
Waranty here I come ...
lol mine is out of waranty, and it's the solution i ve find everywhere !
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
PUTALE said:
did you try hard reset by holding the call and hang up button together when you power up the phone.
last time I remove a program and tha cause me to boot ot a black screen after teh bootloader. Hard reset fix the issue as it return teh phone to the sotck setting of the rom.
Click to expand...
Click to collapse
yes, i've try it (HTC has send me the same advise) and... same issue !
In order to done the hard reset (who didn't execute when the phone is to boot in bootloader) i have do a set 14 0 and reset with power and holding the two call hang and power.
But thanks for the advise !
Frederic.james said:
lol mine is out of waranty, and it's the solution i ve find everywhere !
Click to expand...
Click to collapse
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Trickass said:
Out of warranty ?
How old is it then ?
Mine is just under 1 year old, so I'm lucky I guess ... and I hope
Click to expand...
Click to collapse
Hum it's the phone of a firend who give it to me... and he has buy it on e-bay.... for the waranty sound difficult to retreive a bill and... I will search till i find something to do
hello guys,
after a long research i landed to this forum at last.
today morning i had a client who wanted to have new rom on his tp2 with russian language. but unfortunatly i flashed the tp2 with a wrong flasher! first time hapening something like this... i was pretty sleepy that i didnt even recognised that it was the wrong one... and now the client wants his phone back but the phone dosnt even turn on and not going in the boot menu... only when i plug the usb cable to the pc with the tp2, the pc recognises that there is a usb connected.. but only this.. im really stuck in a bad situation i would be very appreciative if someone can help me with this out the client will come tomorrow again, i hope there is some options to get the tp2 back alive
Try to flash back with stock, but depending on what you've flashed, it might very well be bricked.
This is why you should always be careful as to pay attention to what you are flashing.
Did you apply the wrong hSPL, or the wrong ROM? Did you flash something meant for a CDMA device on a GSM device...? Please, explain exactly what you have done.
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
yildizgsm said:
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
Click to expand...
Click to collapse
You flashed a RHOD with hSPL for BLAC. That's pretty blatant mistake dude.
I'm not sure if there's a way back. Try flashing stock like I already suggested. Try relocking too, I don't know.
You might have to go into mtty, erase everything, flash the radio, then flash stock. Next time, be more careful.
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
yildizgsm said:
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
Click to expand...
Click to collapse
Try flashing via SD?
yildizgsm said:
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Click to expand...
Click to collapse
HardSpl doesn't show a progress bar when flashed. Can you manually put the phone in bootloader mode (Press volume down button and power it up)?
If you can get it into bootloader what does it show on the screen? You may be able to flash the shipped rom after you are in bootloader if when you connect to your PC it says USB toward the bottom of the bootloader screen and then click on the exe for the shipped rom on your PC. Or maybe try flashing the re-locker as suggested earlier to see if you can install the correct SPL.
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
Click to expand...
Click to collapse
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
cajunflavoredbob said:
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
Click to expand...
Click to collapse
Indeed, and a great way to end the thread.