Help relocking Vogue - Touch CDMA Windows Mobile ROM Development

Ok i bought my vogue unlocked w .41 (nonGPS) and since i have had it i have been unable to relock or upgrade unlocker to 2.31. I am trying to get it flashed with a custom GPS rom that i can set to MetroPCS. Any advise would be greatly appreciated.

I'm nowhere near an expert on this, but did you try upgrading to the latest ROM posted on HTC.com? I hear this will relock your device and enable GPS/Rev A, and after that you can install your unlocker and custom ROM.
This is assuming it is a Sprint Touch since I'm not sure if other Touches have the same GPS/Rev A ROM available direct from HTC.

MikeD655321 said:
Ok i bought my vogue unlocked w .41 (nonGPS) and since i have had it i have been unable to relock or upgrade unlocker to 2.31. I am trying to get it flashed with a custom GPS rom that i can set to MetroPCS. Any advise would be greatly appreciated.
Click to expand...
Click to collapse
All the info you need is here and to relock the vogue click here google is your best friend.
Good luck

tried all of that. Im running the sprint 1.12/2.13 original stock rom. Any other updated stock rom flashed my radio away (thanks to .41 unlocker that will not get the f*#k off my phone!). Imcokeman's .40 and 2.31 fail to relock or upgrade to 2.31. Ive had this phone for about 3 weeks now trying to get it switched to Metro. Getting very frustrated.

nvm, im a dumb ass. I've been extracting unlockers and running just the RUU. Big mistake. just got it relocked.

Related

Vogue Stuck at HTC Screen

Hey Guys,
I was trying to flash ToO's Cricket Rom to an HTC Sprint Vogue and after the process was finished it is stuck on the "HTC Smart Mobility" screen. I used an unlocker by cokeman before flashing I I think I need to re-lock the handset to flash it back to the original sprint ROM. However I need the older sprint rom and not the new one with GPS. When I put the phone in bootloader mode this is what it says:
It says:
VOGU100
SPL-0.41 Coke
CPLD-3
Where can I get the older ROM for the sprint vogue?
Update:
I am not able to load the original Sprint ROM. It errors out everytime at about 29%
Planetneo said:
Hey Guys,
I was trying to flash ToO's Cricket Rom to an HTC Sprint Vogue and after the process was finished it is stuck on the "HTC Smart Mobility" screen. I used an unlocker by cokeman before flashing I I think I need to re-lock the handset to flash it back to the original sprint ROM. However I need the older sprint rom and not the new one with GPS. When I put the phone in bootloader mode this is what it says:
It says:
VOGU100
SPL-0.41 Coke
CPLD-3
Where can I get the older ROM for the sprint vogue?
Update:
I am not able to load the original Sprint ROM. It errors out everytime at about 29%
Click to expand...
Click to collapse
Check PPCGeeks, there is a thread with factory ROM's.
Try doing this check your registry under HKEY_LOCAL_MACHINE\Software\Arcosoft\ArcSoft MMS UA\Config\mm1\MMSCsettings\make sure you only have one entry: Cricket MMS if you have another named Default or Sample, delete them and then try again; if it fails Delete all, soft re-boot and then install your ROM. Good luck.
Planetneo said:
Hey Guys,
I was trying to flash ToO's Cricket Rom to an HTC Sprint Vogue and after the process was finished it is stuck on the "HTC Smart Mobility" screen. I used an unlocker by cokeman before flashing I I think I need to re-lock the handset to flash it back to the original sprint ROM. However I need the older sprint rom and not the new one with GPS. When I put the phone in bootloader mode this is what it says:
It says:
VOGU100
SPL-0.41 Coke
CPLD-3
Where can I get the older ROM for the sprint vogue?
Update:
I am not able to load the original Sprint ROM. It errors out everytime at about 29%
Click to expand...
Click to collapse
I'm a little confused on the issue. If you want to flash roms with GPS you need to be unlocked with Imcokes 2.31 not 0.41 unlocker. Once unlocked you can flash to the stock roms. I flash back to Sprints stock GPS rom all the time. Be careful of flashing from a GPS rom back to a non GPS rom. This could cause some issues.
If you are trying to relock your phone thats a different issue.
EDIT: After rereading. Did you try flashing from a non gps rom to a gps rom or vice versa? Your phone looks to be unlocked with a non-gps unlocker. Is the cricket rom GPS?
When flashing a custom ROM your Vogue needs to be unlock with 2.31 (GPS) or .40 (non GPS). Not too sure about cricket but would assume if you have a radio version of 3.xx.xx would be GPS. Hopefully you have not bricked your Vogue.
You may find more help at ppcgeeks.com or ppchaven.com.
You may have to resort flashing your ROM in the bootloader mode,
SAME PROBLEM with Vogue
I think I have the same problem as the one who started this thread. here is what I did:
I unlocked a Vogue with the non-gps unlocker (SPL-0.41.Coke)
then I loaded a GPS rom onto the phone (OMJ 3.09)
and now it is stuck at the HTC Screen.
I then tried to flash a stock ROM to the phone, but as descreibed above it will not fully load- it stops at 29 percent- tried it a couple times.
I then tried the OMJ 3.09 again and it still stuck in HTC Screen, and says "No radio.'
I am trying to figure out what to do. I was told by someone to load a GPS radio into it and see if it boots. I have the radio to install but not sure if thats best bet.
I was told by someone else to install nongps radio and then install a nongps rom.
One concern I have is that I will brick my phone that way (if i try to downgrade to a nongps radio after installing a gps rom...but im not sure that the gps rom actually installed a gps radio or not cuz my phone was only .41 unlocked)
Also, I cant seem to install a stock rom because it stops at 29 percent.
Any ideas?
Thanks
found answer
to anyone else with this problem- I just installed this rom: http://forum.xda-developers.com/showthread.php?t=357762
and all was well including radio.
Just thought that I would post what happened to my phone and the steps that eventually recovered it in case it helps somebody else:
My phone was stuck with "No Radio" on the boot loader screen and the SPL as "SPL-2.31.CoKe", but none of the 3.x ROMs would flash properly that I tried. So here are the steps that eventually recovered it (mostly...):
1.) I installed the ROM above from the tri-color screen (power+camera+reset). I still had no radio, but it was letting me past this and booting up to WM.
2.) I then re-flashed the 2.31.CoKe boot loader (not sure if this step is necessary but listing what worked...)
3.) I tried to install RUU_Vogue_VZW_WWE_3.14.605.1_Radio_3.37.78_Ship.exe but it failed at 10% restarting to RUUNBH screen and the installer gave me Error [290]: Invalid Command
4.) I then tried to install the latest sprint ROM straight from the HTC site:_Touch by HTC (Sprint)_RUU_PPST_Vogue_SPRINT_WWE_3.03.651.4_2_Radio_3.42.30_AM_NV_2.04_Ship this looked like it was going to fail at the same part the Verizon rom did as it rebooted at 10% to RUUNBH screen, but the Sprint installer did something (I heard the computer lose and gain connection multiple times) and eventually it went right back and continued on from 11% and finished successfully.
5.) Rebooted and I had a radio now! Rather then risking trying to install the Verizon ROM again I went straight to the custom ROM I had originally started out with: NFSFAN 6.5 V6 which is working fine for me, except the GPS which is what started out my adventure of the last 3 days...
Just a note: for all flashes except the final one I simply waited till it was at the "Tap the screen..." stage till flashing. I never let any ROM but the final one run it's customization.

Reverting to Stock Rom (Warranty Replacement)

Hi, I searched but couldn't quite find the anwser.
I am sending in my Vogue back to BELL for a warranty replacement. I have unlocked the phone and installed a custom rom (NFSAN 1.31 Bell).
I unlocked the phone using coke 2.31, and I need to relock and install the original Bell Rom before I send it off for warranty replacement. Any help is appreciated, as I don't know how to relock the device. I have the latest Bell rom ready to install, but I dont want the load screen to show coke-2.31 when it is being assessed for replacement.
ernestchi said:
Hi, I searched but couldn't quite find the anwser.
I am sending in my Vogue back to BELL for a warranty replacement. I have unlocked the phone and installed a custom rom (NFSAN 1.31 Bell).
I unlocked the phone using coke 2.31, and I need to relock and install the original Bell Rom before I send it off for warranty replacement. Any help is appreciated, as I don't know how to relock the device. I have the latest Bell rom ready to install, but I dont want the load screen to show coke-2.31 when it is being assessed for replacement.
Click to expand...
Click to collapse
Search for a vogue relocker.
Put this into google: "vogue relocker xda ppcgeeks"
without quotes, should pull up anything about a vogue relocker on ppcgeeks and xda. if i get some time i'll search for it also later tonight, but don't count on that!!
also before you relock it, you'll have to flash to bell's stock 6.1 rom.
search htc.com for that.
if you look good enough for those, you should find it.
I was able to relock the device by installing the coKe 0.40 unlocker, and then installing the stock Bell rom from the HTC site on top of that. It seems to have worked.
Is there any other way to verify that the device is locked and in its original state? How do i enter bootloading state without actually installing another ROM?
SPL-2.01.0000
CPLD-3
Is what the bootloader displays. I assume this means the device is in its original state?
press and hold the power and camera button and hit the soft reset button. Keep holding the power and camera buttons and it will bring you to the boot loader screen. I don't know what it should say if it's locked though
ernestchi said:
I was able to relock the device by installing the coKe 0.40 unlocker, and then installing the stock Bell rom from the HTC site on top of that. It seems to have worked.
Is there any other way to verify that the device is locked and in its original state? How do i enter bootloading state without actually installing another ROM?
SPL-2.01.0000
CPLD-3
Is what the bootloader displays. I assume this means the device is in its original state?
Click to expand...
Click to collapse
before i unlocked my device i wrote down my screen mine says spl-2.01.0000 and cpld-3 so you should be good to go
Thanks for the help everyone... flashed to .40 unlocker, then flashed to stock Alltel Rom, now ready to return my Vogue to Verizon for warranty replacement! Cheers!!!
For future reference:
http://forum.xda-developers.com/showthread.php?t=498964

Upgrading Rom of already upgraded Uni... Unlock again?

So, I got my hand on an Uni G4 (xda exec) that has 6.5 on it... I want to downgrade to the Tmo UK WM5 rom.
How do I know if I have to unlock the sim and cid (again)?
Under what circumstances would the sim and/or cid be re-locked (after it had been unlocked)?
And how do I know if I should do a DOC format? I see that there are a few ROMs that once installed require a DOC format if you want to change the ROM again.
And I did search the forums first, and could find the answers I need. I'm still checking up on the ROM that is currently installed on my Uni - 5.2.23016 (5.3.0 Luca16)
TIA!
Once it has flashed the 1st cooked ROM it has to be full unlocked, no need to do it again so you can downgrade without any problem os locking sim.
Have a look here to get one great wm5 ROM
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helped,
Awsome!
Thanks!

24/11 - Finally, an unlocked SPL for Hero!

I've had this unlocked Hero SPL for a while now, and it's super useful for flashing unsigned updates and cool stuff like custom splashes. Unfortunately i've not been able to distribute it... until now!
WARNING
A PROBLEM FLASHING THE SPL CAN BRICK YOUR DEVICE - as such, proceed with caution. Don't flash this unless you need it, flash at your own risk, flash only to a GSM Hero and do not interrupt the flashing process (which happens on the first reboot after applying the zip). YOU HAVE BEEN WARNED!
The SPL, version 1.76.2007, is in the usual update zip format.
Download: MoDaCo
Enjoy!
P
MoDaCo splash...
http://android.modaco.com/content/s...ial-splash-on-your-device-with-a-modaco-logo/
P
What exactly is the SPL and what benefits will we get from flashing it?
modaco said:
it's super useful for flashing unsigned updates and cool stuff like custom splashes.
Click to expand...
Click to collapse
^^ What he said...
P
fleming222 said:
What exactly is the SPL and what benefits will we get from flashing it?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=SPL%20Questions%3F
Searching is hard so why not get someone else to do it
Thanks modaco I will try it after christmas, just to be sure that my phone won't be bricked till I learn some things better
Nice!
Thanks Paul (and any other eventual leakers not mentioned).
Now I can get rid of my hacked SPL
do we copy this zip file to sd card and update through recovery image? like other radio, rom and theme applying?
Would I be right in thinking I need to CID unlock my Orange Hero (rooted) before I can flash an unlocked SPL? Or is that the whole point of an unlocked SPL?
Not planning on using phone on another network at the moment, just want rid of all locks.
I remember way back when, on my Kaiser, I needed to run Kaiserunlocker.exe when hardSPL'd it, but can't remember the exact procedure.
Many thanks
Phone:
UK Orange Hero (rooted)
ROM: MCR 2.8
Radio: 63.18.55.06IU_6.35.08.22
HBOOT:
hero cvt ship s-on
hboot-1.76.0007 (hero10000)
microp-010f
radio-6.35.08.22
on the device.
Thanks.. easy as cake.
Ready to flash all fun.
First your roms and now this ..
Forever thankfull.
Sulus1179 said:
Would I be right in thinking I need to CID unlock my Orange Hero (rooted) before I can flash an unlocked SPL? Or is that the whole point of an unlocked SPL?
Not planning on using phone on another network at the moment, just want rid of all locks.
Click to expand...
Click to collapse
There should be no need for that, and long as you have rooted phone and a custom recovery you should be able to flash it.
You're confusing CID lock with SIM lock. The SIM lock is what limits your phone to a specific network.
CID lock is software enforced "label" that is used to limit what software can be installed on your phone.
For example: Your Orange branded phone is identical hardware-wise to my sim-unlocked Nordic Hero. However the phones have different CID values. Assuming you havn't rooted it you would be stuck to just running Orange approved ROMs on it. No other ROM would be allowed to be installed even if your hardware is identical and can run it.
CID is a non-issue once the phone is rooted and you got a custom recovery on it that allow us to install whatever we want since it ignores CID.
I'm not that versed in the SIM lock function, but from what I've seen it seems you can get some code to disable it from within Android (look around on the forum for instructions), or there is the serial cable method (explained in a sticky on this forum).
Hope that explains it.
just flashed and flashed modaco startup image too. its so cool. thnx a lot Paul. btw. how to make startup images? cheers
Sulus1179 said:
Would I be right in thinking I need to CID unlock my Orange Hero (rooted) before I can flash an unlocked SPL? Or is that the whole point of an unlocked SPL?
Click to expand...
Click to collapse
Just flashed on a Orange Hero Thanks Paul.
This is what i have now:
HERO CVT ENG S-OFF
HBOOT-1.76.2007 (HERO10000)
Just a little Help
Noob... although i have done this on a windows mobile.... how do i flash it? just as i do it with an update.zip?
Thanks.... and please forgive my ignorance.
You read the first post which answers your question exactly.
P
flashed and done! thanks Paul
P.S. I HATE flashing SPL's because of what can go wrong if not done correctly
finally..superCID without a serial cable..~~
thanks paul,
flashed on t-mobile g2,
HERO CVT ENG S-OFF
HBOOT-1.76.2007 (HERO10000)
i tried to flash the startup image, but failed
EDIT: i flashed again and it works the startup image!!
thanks a lot paul
great work paul, will try this out
Works great just flashed it.
Anyone that can provide the original hero splash1 image logo so i can flash it over a t-mobile logo.
Thanks

Vogue stuck in HTC logo

Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
motoyola said:
Help guys, I have a Sprint vogue that was flashed before. It was CID unlocked and has custom ROM on it. My cousin was the one using it then he returned it to me at this state. Problem is the phone does not have any radio. So i tried to bootload it and flash it with a radio but it does not accept it . It's now CID locked.
VOGU100 MFG
SPL-2.01.1000
CPLD-3
I tried to flash it with an OEM ROM, Sprint, USC, Alltel, telus, Bell, VZW nothing seems to work. is there any way to ICD unlock this? so i could flash it with an OEM rom. Thanks.
Click to expand...
Click to collapse
Hi,
Please post your questions in the Q&A thread of the site. Opening threads should be done only if it is for contributing to the site in any way (roms, kitchens, apps, tips, skins, etc).
Please follow your question over there (I have transferred it there)
Thanks.

Categories

Resources