I keep getting cannot read setings from network on o2 sim
Phone did work till i did a hard reset as it froze
when It rebooted it all went wrong
I have flashed rom to 3.6.3.5
still will not work
please help
Related
Please, please help... During an O2 rom upgrade my xda IIs suddenly rebooted and now it is stuck in bootloader mode. I have worked out there is no rom left in the phone.
I have tried evrything I could search for in the forums but I get the dreaded error 101 whenever I try to re run the o2 upgrade. It seems the xda won't connect to anything.
ANY suggestions would be appreciated
Read Wiki
Especially for the No Operator Updade files, that might hepl you.
ok then...wish me luck
hi hope someone can help me.i tried updati ng my xda exec after downloading the rom update from o2, and now my pc doesnt recognise the xda and my xda doesnt start its gone completely bank.i tried holding the softkeys and pressing the reset button, it says hit 0 to get back to factory settings and nothing happens........please it looks like my phones gone comatose
Moved to Uni Upgrade forum form Upgrade general
i believe u r stuck in bootloader
hi
try the following
disable usb connection from connection settings in active sync
then re upgrade the rom , and when you reach the screen where it tells u the rom version (it wont tell u this time) u ll HAVE to wait for few seconds before pressing "upgrade" , hopefully it will work this time
good luck
hi
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Does anybody have a solution to the above problem as I now have 2 xda execs in the same situation. It's a bloody nightmare! I understand it's in bootloader mode. Just don't know how to get the xda up and running again without sending it off to O2...
Please help!
LOOK HERE I have been in this situation myself a couple of times. Personally I use method 2 which is at the bottom of the page as it's very easy to follow. I suggest you try this method first.
Regards,
Psi
Those of you having trouble after a Rom Flash. If it goes wrong, start by pressing THE BACKLIGHT BUTTON, THE POWER BUTTON AND PRESS IN TO THE SOFT RESET HOLE ALL at the same time. This should put you back into BOOTLOADER. Then try your rom flash again. If the WM6 fails I re-flashed with the O2 EXEC WM5 first. Forget Active Synch saying it cant etc.
Providing you can just see some very faint words then you are back in bootloader. I have got the original O2 XDA EXEC WM5 Rom files so if you want them, as I can not find out how to put a large zip file on here then I can email it to you. Let me know on
[email protected]
pls i need it send to [email protected]
Hi,
i've been searching this forum all day now, and i haven't found a post for my problem. I've been using schap's rom for a few weeks now and yesterday, when i got in my car and put my hermes (t-mobile vario II) into the charger it resetted and it didn't boot anymore. the dark screen comes up (the one with the red numbers) and it goes into the next screen but thats it. I even left it that way for an hour but still no working phone...
Can anybody please help me out? i'd hate it to go back to my old nokia...
HELP!
thanks in advance
Have you tried a hard reset? Also, my phone got stuck there once, and hitting the little reset button on the bottom of the phone got it to work.
I did try a hard reset several times.. still the same problem...
please refer to the unbricking thread here: http://forum.xda-developers.com/showthread.php?t=286755
You will find all the info you need in that thread.
Fixed it!
Hi!
Well i did fix it all right! (happy happy joy joy)
I don't know what went wrong, but i made myself a nice new rom with pandorras kitchen (hermes style) which i installed via the SD card using this info: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Thanks for that!
you could also fix that problem by installing Hardspl7 , it happened with me twice i don't remember with what rom , but it happened and fixed using HardSPL7 .
WBR
after installing a rom update my diamond reboots before windows mobile even appears. I see HTC diamond, seconds pass....vibrate....reboot.
is there anyway to break the cycle....i hope i haven't bricked it.....
please help..... i dont want a $280 crime deterrent device
I had this same problem when I flashed to 1.93, i got pissed and just set my phone aside and let it do its thing then it eventually booted up after like 10 minutes of rebooting. but now my phone is even more messed up because now my phone is not even picking up my t mobile network signal, so ya 1.93 does have some big problems, well at least to me it did. so now im looking to take my phone back to HTC for repairs as I have tried everything I could have myself.
Hard Reset
My friend had the same problem... He let it reboot for a while, ventually i it paused the rebooting and he had the chance to do a har reset. Has been running smoothe ever since.
Remember to do a hard reset everytime you install a new rom...
hello,
i solved this problem by going to bootloader-modus and flash it
with an other rom.
my problem was that i used my own cooked rom by cooking again ...
okokur
Ok, I tried to upgrade from the original WM6 to WM6.1... didn't work (Phone was freezing at the HTC boot up logo)... tried the hard reset many time and still doesn't work. So I recovered with the original Rogers WM6 ROM using the bootloader mode but phone still doesn't boot. Now I only get a black screen.... Please help... not sure if there is anymore hope for my S621.
DrDCT said:
Ok, I tried to upgrade from the original WM6 to WM6.1... didn't work (Phone was freezing at the HTC boot up logo)... tried the hard reset many time and still doesn't work. So I recovered with the original Rogers WM6 ROM using the bootloader mode but phone still doesn't boot. Now I only get a black screen.... Please help... not sure if there is anymore hope for my S621.
Click to expand...
Click to collapse
Welcome to the forum
please search and read
here a good start
http://forum.xda-developers.com/showthread.php?t=415225
Goos luck