Hi,
i've been searching this forum all day now, and i haven't found a post for my problem. I've been using schap's rom for a few weeks now and yesterday, when i got in my car and put my hermes (t-mobile vario II) into the charger it resetted and it didn't boot anymore. the dark screen comes up (the one with the red numbers) and it goes into the next screen but thats it. I even left it that way for an hour but still no working phone...
Can anybody please help me out? i'd hate it to go back to my old nokia...
HELP!
thanks in advance
Have you tried a hard reset? Also, my phone got stuck there once, and hitting the little reset button on the bottom of the phone got it to work.
I did try a hard reset several times.. still the same problem...
please refer to the unbricking thread here: http://forum.xda-developers.com/showthread.php?t=286755
You will find all the info you need in that thread.
Fixed it!
Hi!
Well i did fix it all right! (happy happy joy joy)
I don't know what went wrong, but i made myself a nice new rom with pandorras kitchen (hermes style) which i installed via the SD card using this info: http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Thanks for that!
you could also fix that problem by installing Hardspl7 , it happened with me twice i don't remember with what rom , but it happened and fixed using HardSPL7 .
WBR
Related
hello!
Can anyone help me with this:
after 5 or 10 minutes, or even at the splash screen, my device automatically restarts and does it for several times.
When i try to put it into bootloader mode i see usb,..... but only for a minute. after that it goes out of bootloader mode and starts the OS again...
So i'm a bit worried that when i flash it, the bootloader mode will go out and the device will try to restart.
Any known sollutions to this problem? Any help would be appreciated!!
ps: no answers in the wiki nor in the forum.
thanks in advance to your replies!!!!!
I think your battery is given up or you have bad connection so that you dont get enough power.
Try first to clean the battery and device connections(best to use contact spray for PCB boards) if doesnt help then you need to have new battery
Thanks for your reply.
I just got it back 2 weeks ago and they installed a new board in it... i made them send it back and fix it (i blamed them)
they also putted french rom and AZERTY keyboard in it so they can fix that to (i had englis OS and Qwerty).
Thx for your post, i appreciate it!
Restarting Problem - PLEASE HELP!!!
Hi
I have an Orange SPV m5000 that I rely on for to carry my contact address book and send text messages (I know other phones would do it but I really like my Uni).
Recently mine has decided that it's going restart itself every few seconds. I have no idea why it's doing this, but the shop I bought it from are not helping me at all.
I've hard reset the device and that hasn't worked so if anyone has any ideas then please let me know, or if you know of anywhere I can send it to be repaired (I'm in the UK).
Thanks in advance
Nick
Hi, Sorry, I know a lot of you guys are guru's on here but just need a little help. I have an unlocked T mobile mda which I am running on at&t.It has the 2.26 rom at present.I tried to install WM6 from here http://forum.xda-developers.com/showthread.php?t=324632 last night. Everything was going fine until the download reached 99%. Then it just hung for a while then gave me an error message '302'..From then on all I could get on the phone was the boot screen. I tried several times in boot mode to install again but same thing every time. I thought I had bricked my phone !
This morning I downloaded the 'lite' version from the same page and installed and hey presto, we are back to normal.
I don't know if WM6 is downloaded or not. I do get a different screen as it boots up now though..Firstly i get a screen with 'htc technology' written on it and then I get a screen with like a car speedometer with xda mobile 6 showing. Then it just comes on as normal......I don't know, All I really wanted was the 'touchflo' installed which I thought came with WM6...
Any info would be much appreciated,
Thanks, Paul
Hi
Yes You download the new version. There are more different roms maybe you download wrong rom to your device. İf you download rom with no error message I think you download wm6 rom and you should make hard reset for your device than I think it will be ok soon
Thanks for the reply...
I just did a hard reset and it's just the same as before.....any ideas ??
" 'touchflo' installed which I thought came with WM6..."
it dont
but if the top and buttom bars are not glossy
and the device info in
settings dont say the correct version you dont have wm6
Hi there,
I was running vanilla 3.01 fine!
But this evening my phone was turned off and it did nothing... no light not on the charger and my computer doesn't connect.
I've read a few threads which explained how i could fix this.
So after a hard reset my device only shows the 1st screen with the following information:
IPL 3.04.0001
SPL 1.11.0000
Then nothing.. it sticks to this screen.
Would any of you genuisses help me find a solution?
I would really appreciate! thanx! :-(
found the solution!!!! pffeww
Enter bootloader
Flash original ROM
cid-unlock
update ROM to Vanilla's 3.01
HAPPY!!!!
ps.. THANKS to Aje_fr!!!! (who already posted the solution!)
just in case you don't know how to enter bootloader;
hold down the note and power button and soft reset.
Veel plezier!
now really dead...
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
mtomassen said:
I was installing all my software but when I soft reset it was dead....AGAIN!!..
I entered bootloader again and repeated my previous steps.. but now my device goes to sleep instantly.
it doesn't do anything...
Send it to T-mobile I guess... (Glad I was able to flash the WM6 T-mobile [NL] version)
Anyone got an idea whit it could be?
Click to expand...
Click to collapse
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
nm8 said:
It could just be the backlight switching off. Ive read about this in a few threads. Ive experienced it myself with Meschles 3.01 ROM.
Click to expand...
Click to collapse
Nope, even with te original T-mobile rom it dies after a few minutes...
Thanks for the tip though!
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
I think this is normal my Diamond vibrate on every Startup and when I inital an Call.
Ghostrider
No actually it's not the phone's vibration. It's the image on the screen witch is "flashing" and vibrating.
After a sleeping time, the vibrations are less visible.
If the image on the screen becomes "fuzzy" (like TV interference), it almost sounds like faulty screen some people were experiencing. I doubt it have to do something with your flashing, just happened coincidentially at same time.
nael33 said:
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi, i did have the same problem using TLR (cant remember what version).
What i did was to flash it again with another ROM (bElite v0.54) and my picture was fine after that
Ive got that problem when I flash ANY rom with HARD-SPL running so what I do is flash back to a stock version of spl (1.37) from here http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
So in this order......
1 - Flash HARD SPL
2 - Flash rom
3 - Flash Stock SPL
Problem solved
nael33 said:
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Try what ratcom said. If it still flashes with standard ROM, I would advise you to make everything original again (ie original ROM & SPL) then send back to HTC for repair.
Hi. After my issue, I decided to downgrade the phone and, when I put the official SPL, it was working. 5 minutes later, I read ratcom's post that confirm the problem and the solution. So, this morning, after charging the battery, I used unsigned SSPL, put the HTC rom, get one more time the sreen issue, and reflash the SPL by an original one just like ratcom said. And ... it's working. No more sreen vibration ! And a new and nice HTC rom !
So, thanks for your help !
Hi!
I've got an iPAQ hx4700, well I HAD one yesterday, now I think I've got a piece of metal with electronic inside (until I can fix it and use it). The problem is:
Yesterday I tried to install Sprite Backup on my iPAQ and it was stuck on the installation screen. I soft-reset it and it was stuck on the HP Invent screen. I tried to do a hard-reset and it got stuck on the screen that says"Please wait, cleaning data" (or something like that). I had Alkor 21054 rom with the Wifi patch. I saw that Alkor had made version 21057 and when it began to flash it suddenly said Error and a lot of numbers started to appear on the mtty.I took it out from the dock and soft-reset it and it didn't do Anything at all. Then I tried to enter the bootloader mode (iTASK+Contacts+Soft Reset) and anything again. The charging led doesn't blink when it's connected and my PC doesn't detect it. I know it's not dead because it has never fallen to the floor and it has never get wet, as I said, it was working yesterday.
Please help me.
Thanks in advance
¿Anyone knows anything about this? Please...
vagaerg said:
¿Anyone knows anything about this? Please...
Click to expand...
Click to collapse
Have you tried removing your battery will wait a few minutes and put it back?
After attempts to load and once loaded iPAQ tries to install a new ROM.
Alkor has a new ROM posted on XDA and 4PDA, is more stable than the ROM 20514. When these loading this ROM with "BootLoader_GUI" the process does not reach beyond 38%. When you reach the 38% make two Hard-Reset and you should work.
Good luck.
Greetings
My iPAQ has been without battery during all the night. And what do you mean with "After attempts to load and once loaded iPAQ tries to install a new ROM"
Thanks a lot.
vagaerg said:
My iPAQ has been without battery during all the night. And what do you mean with "After attempts to load and once loaded iPAQ tries to install a new ROM"
Thanks a lot.
Click to expand...
Click to collapse
Hello.
I leave this internet address PDAVIET if it's any help.
It explains how to recover hx4700
http://www.pdaviet.net/showthread.php?26286-PHƯƠNG-PHÁP-CỨU-HP4700-BỊ-LỖI-TRONG-QUÁ-TRÌNH-UP-ROM
I hope it is helpful.
A greeting.
Hello
try remove backup battery (inside the pocket) and wait couple minutes ...
chears
Thanks to all of you, but I have already taken the backup battery for a while and nothing changed and it doesn't get into the bootloader mode, so I can't flash it with an SD card.
Does anyone know what I could do?
Thanks in advance.
Hi Vagaerg, did you ever get this issue sorted? I'm having the same issue with a iPaq HX4700 that I just purchased.