Hi all, when my TP2 is closed (keyboard) and I hit the start menu it appears as blank spaces unless I drag my finger from start menu to blank screen then everything appears again. Anybody come across this yet?
I have a T-Mo TP2...Thanks...Tj
PS I attached a pic.
Anyone have any ideas?
Related
Hi all,
I apologise if this is not the right place to pose this question, but I just got a Touch HD on an Orange contract a couple of days ago, and I can't seem to be able to change the text entry method on my handset. It always stays as 'Phone Keypad', no matter which method I select, from the several methods listed: Block Recognizer, Compact QWERTY, Full QWERTY, Keyboard, etc. It's the same whether I try to make the selection by pressing the "OPTIONS" button on the phone keypad, or whether I go through Start->Settings->Input
All the software/hardware configuration on my handset is exactly as it was when I received it from Orange, so far I haven't even installed a single new program.
Any help? TIA
Hi.
Can't offer any advice as such, but can tell you that I got my HD from Orange just over a week ago, and I can change the keyboard without any problems.
I originally had a Touch Diamond, so I knew how I wanted it set up. I just brought up the menu from the keyboard at the bottom of the screen when it first popped up and did it from there.
Sorry I can't be any help, other than to tell you that you should be able to do it!
Good luck mate.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed Gyrator and everything started to work.
Hi,
I had the exact same problem but i wasnt too bothered but then I installed HD Tweak and Gyrator and everything started to work. I have no idea how it worked though.
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen.
Since then, mine's stayed as I selected it - on Full QWERTY.
Hope this helps!
langauld said:
I got this phone yesterday, and I too was confused as to how I selected the different input method. Then I worked it out
It must be a bug with their firmware. You have to HOLD DOWN the centre button, keep your finger pressed and slide it up the screen to select the preferred input method. I think I did this when I was in the Compose SMS screen."
Same happened with mine. If you click on the options then you cant change it, however if you click on the box in the middle of the screen at the bottom, you can change them.. Bizarre!
Click to expand...
Click to collapse
Thanks for the replies and suggestions, guys. I've got it working for me too: by pressing the 4x4 grid-like icon at the bottom centre of the screen to bring up the keyboard, and then pressing the small upward-pointing arrowhead that brings up keyboard options. I guess that's what ultrazonixe probably means... although I couldn't get it work by sliding my finger upwards off the centre button as langauld suggested (except if incidently I did it from the arrowhead icon).
Thanks for the help!
Yes this is quite tricky till you get the idea.
Press the bottom middle button (icon of keypad) to get the keypad up, if its not already up.
Then the bottom icon changes and adds a small up arrow just to the right of the keypad icon. (nothing to do with the four arrows just below the keypad)
you have to press this small up arrow just to the right of the keypad icon and a menu pops labled "touch input settings".
its not the same one that comes up when you press the options tab which does not work.
Press the right choice eg full qwerty or whatever, and hey presto the keypad changes instantly.
same here
Yes I could change it .. via selecting the arrow next to the mini keyboard on the bottom ... but it used to reset it self every time I starsted the phone...
Now I have TouchPal.. I have never looked back.
I have a TP2 and for some reason, the icons on my start screen have vanished! Basically, when I press the start/windows button in the top left, it opens up the start screen but the icons cannot be seen.
The funny thing is, they are still there because if I press the screen, I can load up the programs that you can use from the start screen - it's like the icons are invisible but are actually still there, I just can't see them but I can use them. Can anyone help me out with that?
Don't worry, it's fixed, soft reset XD
Soooo I had to call tmobile warranty. My touch on the my screen no longer works. But what I find crazy is that for this to be a phone that is not just ALL touch im starting to wonder why even have a keyboard or am i just dumb? I cannot press send on a text if i want to send a message. I cannot even save a number 2 my contacts. With out the touch screen am I just SOL till my new phone comes in the mail? I can make phone calls my opening up the keyboard and using the arrow keys. But the limitations with this phone and no touch screen are ridiculous.
Just wondering am I not able to do NOTHING while my touch screen is out? If anything I want to send text messages and I cannot even do that. Any help? PLEASE ASAP THANKS! CED
so 20 people gladly view my post and out of the 20 no replies...wow
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
cbeck said:
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
Click to expand...
Click to collapse
The shortcuts are the same for his device, but you may have forgotten that the TMo version is unique in that it has no PTT button, no OK button (the enter key works fine to get rid of the shortcut box, however), and the Start button is actually a Home button. you could install tarkim's key remapper and set a hard key to the left soft button, but I haven't used this in a while and it may require some touch input.
Also, I use ZoomBarPlus which makes the zoombar function as a d-pad with up/down, action, and back keys. If you follow the instructions on the thread, you can omit the inbox from the default action and have ZoomBar work with it.
If these don't do it for you, then just wait it out for a couple of days. TMo sends these replacements out very quickly.
Thanks a lot !! worked like charm !!
Im from India , a place where TP2 is not released ( Can you believe that ?? ) , Hence no service for it..
So checking out some new mobiles or will wait for Q1 of 2011 ..
HTC TP2
TMobl
6.0 WM
I use remote desktop periodically, usually to see a Sent msg on my desktop. Sometime I get stuck. It is especially frustrating because I do not have a TAB button.
Like today, I clicked on the To: button of the email message and the address book popped up. but it was half off and half on the screen. The close button did not have an Alt+C short cut to close. I could not drag the window. I was stuck. When I get home tonight it will still be on my desktop.
Anybody have any tricks or tips for tabing, dragging windows, increasing or decreasing the size of panes, etc?
my htc screen not work properly
sometimes when i tap to screen it does not tap properly....wat should i do
Hey Guys
after unlocking my Bootloader last Week, i cant find the setting to activate Dual-Window-Mode, i couldn't find a solution with the search function and google either.
When i first got the phone, it was just there sitting in the recent apps list, next to the "Clear All" button, and i was also able to add a shortcut for it to the navigation bar.
Has anyone else experienced this or does know how to get it back?
Would apreciate some help,
Greetings from Germany
Tom
That is strange. It should be there. I have a dual window button there and also as one of my permanent buttons at the bottom of the screen along with home, back and recent. To do that go to settings, display, home touch buttons and then button combination. You should be able to add a dual window button there. Doesn't answer your question but should help you use dual window.
Thanks for your help, but it just was not there
After flashing my older backup of the /system partition it decided to show up again, so everything is fine now