touch screen out? no SOFT KEYS? - Touch Pro2, Tilt 2 Windows Mobile General

Soooo I had to call tmobile warranty. My touch on the my screen no longer works. But what I find crazy is that for this to be a phone that is not just ALL touch im starting to wonder why even have a keyboard or am i just dumb? I cannot press send on a text if i want to send a message. I cannot even save a number 2 my contacts. With out the touch screen am I just SOL till my new phone comes in the mail? I can make phone calls my opening up the keyboard and using the arrow keys. But the limitations with this phone and no touch screen are ridiculous.
Just wondering am I not able to do NOTHING while my touch screen is out? If anything I want to send text messages and I cannot even do that. Any help? PLEASE ASAP THANKS! CED

so 20 people gladly view my post and out of the 20 no replies...wow

in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.

cbeck said:
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
Click to expand...
Click to collapse
The shortcuts are the same for his device, but you may have forgotten that the TMo version is unique in that it has no PTT button, no OK button (the enter key works fine to get rid of the shortcut box, however), and the Start button is actually a Home button. you could install tarkim's key remapper and set a hard key to the left soft button, but I haven't used this in a while and it may require some touch input.
Also, I use ZoomBarPlus which makes the zoombar function as a d-pad with up/down, action, and back keys. If you follow the instructions on the thread, you can omit the inbox from the default action and have ZoomBar work with it.
If these don't do it for you, then just wait it out for a couple of days. TMo sends these replacements out very quickly.

Thanks a lot !! worked like charm !!
Im from India , a place where TP2 is not released ( Can you believe that ?? ) , Hence no service for it..
So checking out some new mobiles or will wait for Q1 of 2011 ..

Related

! Newbie Help: Mass SMS? !

Hi - hope this is not an old question...
Just got my Excalibur....
Is there a way to do MASS SMS to Groups?
Used to be able to do that in my old PPC Phone by Contact Categories....
Oh... another thing...
In a new message - the 'TO:' field takes only numbers... in the old phone - it was able to enter by name... any fix?
Any help appreciated!
Don't know about the Mass SMS, but you can enter names in the sms window by pressing the Center key of the D-Pad once to bring up your contact list. Just press the keys then and it will search for the contact in T9 mode. Select your contact and press the center key again.
I don't think the default input mode of the To: field can be changed. Just press the Enter/Center key to search by name.
PhoenixAG said:
Don't know about the Mass SMS, but you can enter names in the sms window by pressing the Center key of the D-Pad once to bring up your contact list. Just press the keys then and it will search for the contact in T9 mode. Select your contact and press the center key again.
I don't think the default input mode of the To: field can be changed. Just press the Enter/Center key to search by name.
Click to expand...
Click to collapse
I thought there was a registry hack for this???
PhoenixAG said:
Don't know about the Mass SMS, but you can enter names in the sms window by pressing the Center key of the D-Pad once to bring up your contact list. Just press the keys then and it will search for the contact in T9 mode. Select your contact and press the center key again.
I don't think the default input mode of the To: field can be changed. Just press the Enter/Center key to search by name.
Click to expand...
Click to collapse
Hey thanks for the tip...
Still hoping there'll be a solution to the MASS sms thingy....
Well.... found a solution - not ideal but workable...
A bit tedious at first - but once setup - it really works well.
http://www.gpcarreon.com/?p=466
You'll need this first to run the MortScript:
http://www.sto-helit.de/modules/edito/content.php?id=38
Sorry - download here instead for the mortscript.exe
http://www.smartphone-freeware.com/download-mortscript.html

PTT - Button 5 for 3.30.0.9 [LVSW Edition]

Hello All
Is any fix for PTT - button 5, when I push it a pop-up windows is saying "the file Start cannot be open, Either is not signed with a trusted certificate, or one of its components cannot be found, If te problem persists, try reinstalling or restoring this file" 10x4 help
yo3gjc said:
Hello All
Is any fix for PTT - button 5, when I push it a pop-up windows is saying "the file Start cannot be open, Either is not signed with a trusted certificate, or one of its components cannot be found, If te problem persists, try reinstalling or restoring this file" 10x4 help
Click to expand...
Click to collapse
in settings..buttons what is button 5 set to to open as an app?
from sleuth...
@shadowmite: PTTFix might not help this case since lvsw's ROM isn't from Cingular. Cingular removed button 5 from the standard mapping and attached it to PTT in their ROM. My fix traps the custom messages they generate then re-directs them by interpreting the button manager's registry entries.
@yo3gjc:Sounds like you're mapped to an invalid app or shortcut. You should be able to re-map button 5 using the button manager though.
PTT fix
Yapp, you are right, my device has a cingy origin, the PTT fix is not fixing my problem. Any idea is kindly appreciated
can you see button 5 in button manager? (start->settings->personal tab->Buttons). If so, please post a screencap so we can see what you're trying to tell us.
PTT fix
Yapp I can see it in Button Settings, Button 5 (press and hold), and I can select the application for it but is not functional and when I press it shows me that pop-up message
So it pops the error message no matter what app you select? Looks like a hard reset is in your near future....
PTT fix
Yes this is correct, no metter what apps I am selecting from Button selection the "poo-up" message is there, at least to disble the button, this one is the easiest to be pushed ), and sorry my newbee question, how to do a hard reset, my device is 3 days old, I am still learning it.
tks
Using hardware:
while holding down the left & right softkeys, press the reset button. Follow the instructions that appear on the screen
Using software:
in Settings->System Tab, choose "Clear Storage" and follow the instructions. Not all ROMs have this but yours should.
PTT fix
I've done a hard reset and still the PTT button is not working, another message there is no apps assign for the button but from the buttons selection regardless what apps I am selecting I am getting the same message. Tks for support
yo3gjc said:
Yapp I can see it in Button Settings, Button 5 (press and hold), and I can select the application for it but is not functional and when I press it shows me that pop-up message
Click to expand...
Click to collapse
you have to assign an application to Button 5, not Button 5 (press and hold)
BINGO!!!!! yes, you are right, is working, so Button 5 press and hold stays unassigned and assign to Button 5, Tks , you make my day

AE Button 2.6.6 - 2.2.09 - Experiences

there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!

[REF] Sky's Remote Record Service on Touch HD

I've always been frustrated that sky have never released remote record for windows mobile, and recently even more frustrated when i noticed they've released an official iphone version!
It's ok to use the java version if you have a keyboard on your phone but i've never managed to log-in using just a touchscreen, until not. Here's how:
Before doing the following make sure you have activated remote record from your sky account.
Firstly download and install AE-Button Plus. Set it up in the following way:
Volume Up:
1: Press Up arrow key
2: Press Left arrow key
3: Press Enter
Long: Press Left SoftKey
Volume Down:
1: Press Down arrow key
2: Press Right arrow key
3: Press Enter
Long: Press Right SoftKey
Next download and instal the attached file (SkyMobile_SonyWithoutTv.jar), it's the java version of sky remote record.
Once it's installed run it and you'll be presented with a login screen. The username field should be highlighted in yellow. Press the volume up key 3 times. Your keyboard should pop up. Enter your username and press ok.
now pres the volume down key once to highlight password then press again 3 times. Now enter your password and press ok. Press the volume up key for a few seconds to login. It should take a few seconds and you'll be logged in to sky's remote record service.
To navigate around it just use the key mappings from above.
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
trice1921 said:
I've always been frustrated that sky have never released remote record for windows mobile, and recently even more frustrated when i noticed they've released an official iphone version!
It's ok to use the java version if you have a keyboard on your phone but i've never managed to log-in using just a touchscreen, until not. Here's how:
Before doing the following make sure you have activated remote record from your sky account.
Firstly download and install AE-Button Plus. Set it up in the following way:
Volume Up:
1: Press Up arrow key
2: Press Left arrow key
3: Press Enter
Long: Press Left SoftKey
Volume Down:
1: Press Down arrow key
2: Press Right arrow key
3: Press Enter
Long: Press Right SoftKey
Next download and instal the attached file (SkyMobile_SonyWithoutTv.jar), it's the java version of sky remote record.
Once it's installed run it and you'll be presented with a login screen. The username field should be highlighted in yellow. Press the volume up key 3 times. Your keyboard should pop up. Enter your username and press ok.
now pres the volume down key once to highlight password then press again 3 times. Now enter your password and press ok. Press the volume up key for a few seconds to login. It should take a few seconds and you'll be logged in to sky's remote record service.
To navigate around it just use the key mappings from above.
Click to expand...
Click to collapse
Trice,
I had solved this a couple of weeks ago on www.coolsmartphone.com , where it had been discussed for the Kaiser, but could not get it to work simply by mapping the buttons as you mention (Left & Right Soft keys would not work even when mapped in aebutton plus). Had meant to post the solution here, but forgot!!
The built in java did not work for me, so i had to install the java software they provided...and there was a registry key change needed as well.
See http://www.coolsmartphone.com/forum/viewtopic.php?t=13782&postdays=0&postorder=asc&start=15 for my solution, I've posted it below as well.
Firstly, follow the instructions in the original article posted by gears ie. register on the web for sky mobile and download and install the java software and SkyMobile_SonyWithoutTv.jar file.
Also register for "Remote Record" via your Sky+ box (instructions on the Sky.com website)
Next, as the HD does not have a hardware keyboard, we need to "spoof" the OS into thinking the HD does have one. This is done in one key in the
registry (which I found completely by accident while looking for a different one!).
Goto... "HKCU/Software/Microsoft/Shell" and change the value of "HasKeyboard" to 1
Soft Reset the phone.
We will then need to map some of the buttons to give us up/down/left/right, Enter and Left/Right Soft keys. As NickMilner suggests above, i use "AE Button Plus" and my mapping instructions assume that's what you will use. (the program does cost but i don't know of any other one that provides double, triple and long press options for each key and appears to work well enough in free/trial mode anyway!)
Map the following in AE Button Plus
Volume Up button: Single press - Volume Up
Double press - Press Up Arrow
Triple press - Press Left Arrow
Long press - Press Left Soft Key
Volume Down Button: Single press - Volume Down
Double press - Press Down Arrow
Triple press - Press Right Arrow
Long press - Press Right Soft Key
Green Phone Button: Single Press - Press Green Button
Double Press - Press Enter
I would have liked to use the Red Phone button, but whatever selection i made, the red button always acted as an "Exit" button in the java app, so I went with the above. It's a bit complicated I know with all those double and triple presses, but IT WORKS and i've soon got used to it. I'm sure you could chose your own combination of presses, but the above ones work.
Well, there you go, see if it works for you (I Bl**dy hope so...this has taken me ages to write!!)
Click to expand...
Click to collapse
Slightly different key mappings than yours (mine keeps vol up/down on the same keys), but the effect is the same!
I would suggest people try whichever works for them.
cirrus363 said:
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
Click to expand...
Click to collapse
Yep, same here.
JimLin said:
Yep, same here.
Click to expand...
Click to collapse
Have you tried both mine and trice's methods?
colthekid said:
Have you tried both mine and trice's methods?
Click to expand...
Click to collapse
Sorry, I hadn't refreshed after I posted so hadn't seen your method. I'll try this evening.
cirrus363 said:
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
Click to expand...
Click to collapse
I was getting a connection error when i was trying to login while connected to activesync. I disconnected and tried again through 3g and it worked fine. Are you trying to connect through 3g?
I've downloaded the file, SkyMobile_SonyWithoutTv.jar.zip - and an app to open it, but I can't actually get it to run? I know it's bound to be something really simple, but can someone tell me what I'm likely to be doing wrong? Thanks.
Boris71 said:
I've downloaded the file, SkyMobile_SonyWithoutTv.jar.zip - and an app to open it, but I can't actually get it to run? I know it's bound to be something really simple, but can someone tell me what I'm likely to be doing wrong? Thanks.
Click to expand...
Click to collapse
You have to extract SkyMobile_SonyWithoutTv.jar from the zip file. Once you've done that move SkyMobile_SonyWithoutTv.jar to your HD and install it using the java client that should already be installed on the HD.
That helped me get a bit further thanks, only now, when I actually try to install it, I get the message, " The archive file (.jar) for /_SkyMobile_SonyWithoutTv.jar appears to be corrupt. -36".
Any ideas?
Can you not write a Dpad program to run the Jar program inside it???
trice1921 said:
I was getting a connection error when i was trying to login while connected to activesync. I disconnected and tried again through 3g and it worked fine. Are you trying to connect through 3g?
Click to expand...
Click to collapse
Yes I was standalone connecting to 3G.
Hi All,
I'm new to this forum, but I've been interested in the above problem for a while. I'm using the Xperia X1 Phone and have recently installed a windows mobile 6.5 rom - http://forum.xda-developers.com/showthread.php?t=508057
Previously I was using 6.1 and unable to connect to the application, receiving the message:
'The data connection has failed. Please check the network coverage'
From reading the previous comments and other threads I wasn't the only one. However, after installing the above rom, everything seems to be working perfectly (including remote record). I didn't even have to do any button mapping.
I think the internet config settings applied by my network provider (vodafone) was stopping the application from connecting. Installing the new rom applied default settings and eliminated what was causing the connection problems. I also tried via my WIFI connection, but it wouldn’t connect using this methos.
Hope some of this helps,
MJ
Followed the instructions as per OP, but seem to be struggling with AE Button Plus. I thought I'd mapped the buttons correctly, but they still don't work! Does anyone have any suggestions? (using v 2.6.6)
An update that might help some. I couldn't get AE Button to work with the CAB mentioned in this thread - so no Sky on my mobile! - but a different approach saw me try to access Sky Player using Skyfire ................ and it worked! A little bit fiddly, but useable.

What does this button on the Touch Pro2 do? Where is the windows and okay key?

What does the this button on the Touch Pro2?
Is this button also an okay button? I don't see any ok button on the Touch Pro2 keyboard and if it doesn't have it, I won't get the Touch Pro2. The picture is attached on my first post.
It is the "back" button
RMU said:
It is the "back" button
Click to expand...
Click to collapse
So it deletes text and moves back in opera browser? That's all? That's the dumbest hardware choice ever.
Seriously man, what does it do and WHEN DOES IT DO IT?
When it goes back, does it alt tab also?
Please be specific, I obviously know what back does but the point is that I need to know exactly how it works.
For example the zoom bar on toshiba tg01 only works in the web browser while the zoom bar on the touch pro2 works in both the browser and in images.
So please explain in detail. I need an okay button.
poetryrocksalot said:
What does the this button on the Touch Pro2?
Is this button also an okay button? I don't see any ok button on the Touch Pro2 keyboard and if it doesn't have it, I won't get the Touch Pro2. The picture is attached on my first post.
Click to expand...
Click to collapse
No TP2 for you. It's a return key.
What is does? Well, it goes back. Twice if you press it twice.
Pimmr said:
No TP2 for you. It's a return key.
What is does? Well, it goes back. Twice if you press it twice.
Click to expand...
Click to collapse
Oh I see it's like the back key (which also functions as delete) on my Xperia.
poetryrocksalot said:
Oh I see it's like the back key (which also functions as delete) on my Xperia.
Click to expand...
Click to collapse
Yea. it backs up pretty much any program your in. Also, if your in a windows menu, hitting that will take you back to the previous menu, or to the home screen if you hit it enough times. hitting the 'end call' button im told also takes you directly to the home screen.
Not sure if it works for Text typing. as when your typing, you should either be using the on-screen keyboard, or the hardware keyboard, both of which have their own backspace.
It interesting that not a lot of people know this. The back key can be used as an okay key. Every time you have a window with an okay button, you can use the back key for it.
(I've actually seen a review of the TP2 that blasts it for not having an okay button)
Hmmm very interesting posts.
You see my Xperia has an okay button but it only serves as functions for pressing the ok or x on the screen.
However the okay button does not goes back between web pages and that kind of stuff or text editing.
But my Xperia has a [del/backspace] key on the keyboard and it also serves as a backspace and web page browsing button that goes to the previous page.
So are you saying that the 3rd button on the TP2 is a combination of both the [del/backspace] and the okay button?
By the way...does the Touch Pro2's back button also apply settings when it presses [ok]?
poetryrocksalot said:
Hmmm very interesting posts.
You see my Xperia has an okay button but it only serves as functions for pressing the ok or x on the screen.
However the okay button does not goes back between web pages and that kind of stuff or text editing.
But my Xperia has a [del/backspace] key on the keyboard and it also serves as a backspace and web page browsing button that goes to the previous page.
So are you saying that the 3rd button on the TP2 is a combination of both the [del/backspace] and the okay button?
By the way...does the Touch Pro2's back button also apply settings when it presses [ok]?
Click to expand...
Click to collapse
Yes it functions exactly as the ok button on screen. I've just tried it out and it saves settings etc
Here's my attempt at a definitive answer to this. The back key
does the following:
-In Opera, if any text fiels is selected (ie, address bar, search bar, text box in website) it functions as the backspace key. (This is quite silly, I think)
-In Opera, if no text fields are selected, it functions as a back button.
-In all apps, it functions as an ok and minimize button. It will save settings. Eg, if you have the calculator app opened, pressing this button will minimize it.
-In level 1 TF3D tabs, it'll return you to the Home tab. Eg, if at Weather tab, it'll bring you to Home tab.
-In the Album app, if viewing a picture, it'll bring you back out to thumbnail view.
-In all 2nd level views of TF3D, it'll bring you back to the level 1 tab where you were. Eg, if you're in the Music Library, it'll bring you out to the Music tab.
-In Calendar day view, it'll bring you back to month view.
ohyeahar said:
Here's my attempt at a definitive answer to this. The back key
does the following:
-In Opera, if any text fiels is selected (ie, address bar, search bar, text box in website) it functions as the backspace key. (This is quite silly, I think)
-In Opera, if no text fields are selected, it functions as a back button.
-In all apps, it functions as an ok and minimize button. It will save settings. Eg, if you have the calculator app opened, pressing this button will minimize it.
-In level 1 TF3D tabs, it'll return you to the Home tab. Eg, if at Weather tab, it'll bring you to Home tab.
-In the Album app, if viewing a picture, it'll bring you back out to thumbnail view.
-In all 2nd level views of TF3D, it'll bring you back to the level 1 tab where you were. Eg, if you're in the Music Library, it'll bring you out to the Music tab.
-In Calendar day view, it'll bring you back to month view.
Click to expand...
Click to collapse
Thanks, I will highly consider swapping this for the Xperia X1 and paying maybe 100-150 dollars that the X1 can't pay for (if I get the money of course).
I wonder if anyone knows about what the "House" button on the T-Mobile Touch Pro2 is going to do. They switched it from a Windows Symbol into a House.

Categories

Resources