[REF] Sky's Remote Record Service on Touch HD - Touch HD Themes and Apps

I've always been frustrated that sky have never released remote record for windows mobile, and recently even more frustrated when i noticed they've released an official iphone version!
It's ok to use the java version if you have a keyboard on your phone but i've never managed to log-in using just a touchscreen, until not. Here's how:
Before doing the following make sure you have activated remote record from your sky account.
Firstly download and install AE-Button Plus. Set it up in the following way:
Volume Up:
1: Press Up arrow key
2: Press Left arrow key
3: Press Enter
Long: Press Left SoftKey
Volume Down:
1: Press Down arrow key
2: Press Right arrow key
3: Press Enter
Long: Press Right SoftKey
Next download and instal the attached file (SkyMobile_SonyWithoutTv.jar), it's the java version of sky remote record.
Once it's installed run it and you'll be presented with a login screen. The username field should be highlighted in yellow. Press the volume up key 3 times. Your keyboard should pop up. Enter your username and press ok.
now pres the volume down key once to highlight password then press again 3 times. Now enter your password and press ok. Press the volume up key for a few seconds to login. It should take a few seconds and you'll be logged in to sky's remote record service.
To navigate around it just use the key mappings from above.

Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta

trice1921 said:
I've always been frustrated that sky have never released remote record for windows mobile, and recently even more frustrated when i noticed they've released an official iphone version!
It's ok to use the java version if you have a keyboard on your phone but i've never managed to log-in using just a touchscreen, until not. Here's how:
Before doing the following make sure you have activated remote record from your sky account.
Firstly download and install AE-Button Plus. Set it up in the following way:
Volume Up:
1: Press Up arrow key
2: Press Left arrow key
3: Press Enter
Long: Press Left SoftKey
Volume Down:
1: Press Down arrow key
2: Press Right arrow key
3: Press Enter
Long: Press Right SoftKey
Next download and instal the attached file (SkyMobile_SonyWithoutTv.jar), it's the java version of sky remote record.
Once it's installed run it and you'll be presented with a login screen. The username field should be highlighted in yellow. Press the volume up key 3 times. Your keyboard should pop up. Enter your username and press ok.
now pres the volume down key once to highlight password then press again 3 times. Now enter your password and press ok. Press the volume up key for a few seconds to login. It should take a few seconds and you'll be logged in to sky's remote record service.
To navigate around it just use the key mappings from above.
Click to expand...
Click to collapse
Trice,
I had solved this a couple of weeks ago on www.coolsmartphone.com , where it had been discussed for the Kaiser, but could not get it to work simply by mapping the buttons as you mention (Left & Right Soft keys would not work even when mapped in aebutton plus). Had meant to post the solution here, but forgot!!
The built in java did not work for me, so i had to install the java software they provided...and there was a registry key change needed as well.
See http://www.coolsmartphone.com/forum/viewtopic.php?t=13782&postdays=0&postorder=asc&start=15 for my solution, I've posted it below as well.
Firstly, follow the instructions in the original article posted by gears ie. register on the web for sky mobile and download and install the java software and SkyMobile_SonyWithoutTv.jar file.
Also register for "Remote Record" via your Sky+ box (instructions on the Sky.com website)
Next, as the HD does not have a hardware keyboard, we need to "spoof" the OS into thinking the HD does have one. This is done in one key in the
registry (which I found completely by accident while looking for a different one!).
Goto... "HKCU/Software/Microsoft/Shell" and change the value of "HasKeyboard" to 1
Soft Reset the phone.
We will then need to map some of the buttons to give us up/down/left/right, Enter and Left/Right Soft keys. As NickMilner suggests above, i use "AE Button Plus" and my mapping instructions assume that's what you will use. (the program does cost but i don't know of any other one that provides double, triple and long press options for each key and appears to work well enough in free/trial mode anyway!)
Map the following in AE Button Plus
Volume Up button: Single press - Volume Up
Double press - Press Up Arrow
Triple press - Press Left Arrow
Long press - Press Left Soft Key
Volume Down Button: Single press - Volume Down
Double press - Press Down Arrow
Triple press - Press Right Arrow
Long press - Press Right Soft Key
Green Phone Button: Single Press - Press Green Button
Double Press - Press Enter
I would have liked to use the Red Phone button, but whatever selection i made, the red button always acted as an "Exit" button in the java app, so I went with the above. It's a bit complicated I know with all those double and triple presses, but IT WORKS and i've soon got used to it. I'm sure you could chose your own combination of presses, but the above ones work.
Well, there you go, see if it works for you (I Bl**dy hope so...this has taken me ages to write!!)
Click to expand...
Click to collapse
Slightly different key mappings than yours (mine keeps vol up/down on the same keys), but the effect is the same!
I would suggest people try whichever works for them.

cirrus363 said:
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
Click to expand...
Click to collapse
Yep, same here.

JimLin said:
Yep, same here.
Click to expand...
Click to collapse
Have you tried both mine and trice's methods?

colthekid said:
Have you tried both mine and trice's methods?
Click to expand...
Click to collapse
Sorry, I hadn't refreshed after I posted so hadn't seen your method. I'll try this evening.

cirrus363 said:
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
Click to expand...
Click to collapse
I was getting a connection error when i was trying to login while connected to activesync. I disconnected and tried again through 3g and it worked fine. Are you trying to connect through 3g?

I've downloaded the file, SkyMobile_SonyWithoutTv.jar.zip - and an app to open it, but I can't actually get it to run? I know it's bound to be something really simple, but can someone tell me what I'm likely to be doing wrong? Thanks.

Boris71 said:
I've downloaded the file, SkyMobile_SonyWithoutTv.jar.zip - and an app to open it, but I can't actually get it to run? I know it's bound to be something really simple, but can someone tell me what I'm likely to be doing wrong? Thanks.
Click to expand...
Click to collapse
You have to extract SkyMobile_SonyWithoutTv.jar from the zip file. Once you've done that move SkyMobile_SonyWithoutTv.jar to your HD and install it using the java client that should already be installed on the HD.

That helped me get a bit further thanks, only now, when I actually try to install it, I get the message, " The archive file (.jar) for /_SkyMobile_SonyWithoutTv.jar appears to be corrupt. -36".
Any ideas?

Can you not write a Dpad program to run the Jar program inside it???

trice1921 said:
I was getting a connection error when i was trying to login while connected to activesync. I disconnected and tried again through 3g and it worked fine. Are you trying to connect through 3g?
Click to expand...
Click to collapse
Yes I was standalone connecting to 3G.

Hi All,
I'm new to this forum, but I've been interested in the above problem for a while. I'm using the Xperia X1 Phone and have recently installed a windows mobile 6.5 rom - http://forum.xda-developers.com/showthread.php?t=508057
Previously I was using 6.1 and unable to connect to the application, receiving the message:
'The data connection has failed. Please check the network coverage'
From reading the previous comments and other threads I wasn't the only one. However, after installing the above rom, everything seems to be working perfectly (including remote record). I didn't even have to do any button mapping.
I think the internet config settings applied by my network provider (vodafone) was stopping the application from connecting. Installing the new rom applied default settings and eliminated what was causing the connection problems. I also tried via my WIFI connection, but it wouldn’t connect using this methos.
Hope some of this helps,
MJ

Followed the instructions as per OP, but seem to be struggling with AE Button Plus. I thought I'd mapped the buttons correctly, but they still don't work! Does anyone have any suggestions? (using v 2.6.6)

An update that might help some. I couldn't get AE Button to work with the CAB mentioned in this thread - so no Sky on my mobile! - but a different approach saw me try to access Sky Player using Skyfire ................ and it worked! A little bit fiddly, but useable.

Related

PTT - Button 5 for 3.30.0.9 [LVSW Edition]

Hello All
Is any fix for PTT - button 5, when I push it a pop-up windows is saying "the file Start cannot be open, Either is not signed with a trusted certificate, or one of its components cannot be found, If te problem persists, try reinstalling or restoring this file" 10x4 help
yo3gjc said:
Hello All
Is any fix for PTT - button 5, when I push it a pop-up windows is saying "the file Start cannot be open, Either is not signed with a trusted certificate, or one of its components cannot be found, If te problem persists, try reinstalling or restoring this file" 10x4 help
Click to expand...
Click to collapse
in settings..buttons what is button 5 set to to open as an app?
from sleuth...
@shadowmite: PTTFix might not help this case since lvsw's ROM isn't from Cingular. Cingular removed button 5 from the standard mapping and attached it to PTT in their ROM. My fix traps the custom messages they generate then re-directs them by interpreting the button manager's registry entries.
@yo3gjc:Sounds like you're mapped to an invalid app or shortcut. You should be able to re-map button 5 using the button manager though.
PTT fix
Yapp, you are right, my device has a cingy origin, the PTT fix is not fixing my problem. Any idea is kindly appreciated
can you see button 5 in button manager? (start->settings->personal tab->Buttons). If so, please post a screencap so we can see what you're trying to tell us.
PTT fix
Yapp I can see it in Button Settings, Button 5 (press and hold), and I can select the application for it but is not functional and when I press it shows me that pop-up message
So it pops the error message no matter what app you select? Looks like a hard reset is in your near future....
PTT fix
Yes this is correct, no metter what apps I am selecting from Button selection the "poo-up" message is there, at least to disble the button, this one is the easiest to be pushed ), and sorry my newbee question, how to do a hard reset, my device is 3 days old, I am still learning it.
tks
Using hardware:
while holding down the left & right softkeys, press the reset button. Follow the instructions that appear on the screen
Using software:
in Settings->System Tab, choose "Clear Storage" and follow the instructions. Not all ROMs have this but yours should.
PTT fix
I've done a hard reset and still the PTT button is not working, another message there is no apps assign for the button but from the buttons selection regardless what apps I am selecting I am getting the same message. Tks for support
yo3gjc said:
Yapp I can see it in Button Settings, Button 5 (press and hold), and I can select the application for it but is not functional and when I press it shows me that pop-up message
Click to expand...
Click to collapse
you have to assign an application to Button 5, not Button 5 (press and hold)
BINGO!!!!! yes, you are right, is working, so Button 5 press and hold stays unassigned and assign to Button 5, Tks , you make my day

Black Majik with Cyberon Voice Dial Enchantment

Has anyone gotte the Voice dialer in the Enchantment pack to work correctly under Majik? I've assigned the button as normal and although I can run the application directly from Programs, calling it via the button results in an error opening the shortcut or locating the target filename.
Yes I've gotten it to work correctly. I've map button 5 (press and hold) to Voice Speed Dial.
Hmmm. Did you use the one in Enchantments.zip or the one from the old Shadow archive?
Yes I had the same problem ,I assigned the button (PTT) the quick one and it worked about twice and then the error. I then reassigned it to the push and hold
button and it has worked for me fine ever since about 4 days I will say I also tried that same button combination with Microsoft Voice Command got the same results so I don't think it has anything with the programs.
edbutler said:
Yes I had the same problem ,I assigned the button (PTT) the quick one and it worked about twice and then the error. I then reassigned it to the push and hold
button and it has worked for me fine ever since about 4 days I will say I also tried that same button combination with Microsoft Voice Command got the same results so I don't think it has anything with the programs.
Click to expand...
Click to collapse
I also found this bug if you asign PTT button to something it will work fine untill you change another button (or even if you just open the "buttons" program), then you'll have to change PTT button to something else, and change it back to what you want, after that it will work fine untill you change something else again.

Repurposing the volume up/down buttons?

i really miss hardware scroll buttons.
on the rhodium there are two little side buttons for adjusting the volume. i'd really like to repurpose these as scroll up/down. For example, to work inside a browser. Unfortunately, there is no standard option (i can find) to redefine the purpose of these buttons.
i'm hoping there's another way. eg registry hack etc.
thanks for any help,
Use AEBPlus
I am doing exactly the same thing with my Volume Up/Volume Down, I've turned them into arrow keys. The lack of these is my biggest annoyance with the TP2.
That said, I have noticed a little flakiness - most of the time they work fine, but sometimes I hit them and they don't scroll as I expect. Then a moment later they start working.
Anyway, it's much better than not having them re-assigned.
Incidentally, AEBPlus has a cool feature where you can tell it not to remap the Volume keys when you're on a call, so they can still be used then.
Thanks for the tip, i'll give it a go!
AEBPlus works? I'll try it. heard from another TP2 user that it caused his device to freeze up resulting in a hard reset...
Putra said:
AEBPlus works? I'll try it. heard from another TP2 user that it caused his device to freeze up resulting in a hard reset...
Click to expand...
Click to collapse
Been OK for me so far
Yes, AEB Plus works (no hard reset), but I can only add the windows button. The <-- (back) button does not work when mapped using AEB Plus.
Also, if you're using the JBed Midlet manager, the arrow keys automatically scroll up and down. It works well with Opera Mini.
AEB plus does nothing for me... i just have a list of buttons I can't do anythign with, a giant memory leak and crashing.
julienrl said:
AEB plus does nothing for me... i just have a list of buttons I can't do anythign with, a giant memory leak and crashing.
Click to expand...
Click to collapse
Yeah there appears to be no way to open an entry from the list using touch alone - must be a bug.
Highlight one of the buttons in the list, flip out your keyboard and then press enter/return. It will open the Edit menu where you can assign that button to something.
tjobbins said:
Yeah there appears to be no way to open an entry from the list using touch alone - must be a bug.
Highlight one of the buttons in the list, flip out your keyboard and then press enter/return. It will open the Edit menu where you can assign that button to something.
Click to expand...
Click to collapse
ahhhhhhhhhhhhhhhhhhhhhh! lol, I was wondering why people were talking so much about an app that does nothing
Did you guys install to main memory? I had no problems with AEB Plus on my 1.19.707.2 ROM.
I could assign the vol up/down keys and could also add the windows key. It is a bit tricky using the windows key as the first press brings up the programs tab.
I added the back key also, but couldn't get it to work. I didn't touch the send and end keys.
BTW, I used AEBPlus v2661
Putra said:
Did you guys install to main memory? I had no problems with AEB Plus on my 1.19.707.2 ROM.
I could assign the vol up/down keys and could also add the windows key. It is a bit tricky using the windows key as the first press brings up the programs tab.
I added the back key also, but couldn't get it to work. I didn't touch the send and end keys.
BTW, I used AEBPlus v2661
Click to expand...
Click to collapse
This all is my biggest concern upgrading from a Tilt.. I REALLY like hardware buttons, and make extensive use of AEButtonPLus as it is...
tjobbins said:
Yeah there appears to be no way to open an entry from the list using touch alone - must be a bug.
Highlight one of the buttons in the list, flip out your keyboard and then press enter/return. It will open the Edit menu where you can assign that button to something.
Click to expand...
Click to collapse
Press the entry in the list and keep holding for a few seconds more.
I've been using it since I had my touch hd and it works perfectly and I haven't found it to cause any issues.
Personally i assign one volume button to a task switcher (spb ms3 task manager) which makes multi-tasking far easier. You can then map double clicking to the original volume functions and even long hold to something else useful such as comm manager.
Awesome Tip. AEBplus Confirmed to be working fine on TP2 from T-Mobile (still stock rom for now). I made the volume buttons map to up and down like suggested but also made a long hold for volume up do "enter/activate" and a long hold for down do rotate the display.
my phone (telus rom) keeps getting screwed up when I install AEBplus and gets back to normal when I undo it.

touch screen out? no SOFT KEYS?

Soooo I had to call tmobile warranty. My touch on the my screen no longer works. But what I find crazy is that for this to be a phone that is not just ALL touch im starting to wonder why even have a keyboard or am i just dumb? I cannot press send on a text if i want to send a message. I cannot even save a number 2 my contacts. With out the touch screen am I just SOL till my new phone comes in the mail? I can make phone calls my opening up the keyboard and using the arrow keys. But the limitations with this phone and no touch screen are ridiculous.
Just wondering am I not able to do NOTHING while my touch screen is out? If anything I want to send text messages and I cannot even do that. Any help? PLEASE ASAP THANKS! CED
so 20 people gladly view my post and out of the 20 no replies...wow
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
cbeck said:
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
Click to expand...
Click to collapse
The shortcuts are the same for his device, but you may have forgotten that the TMo version is unique in that it has no PTT button, no OK button (the enter key works fine to get rid of the shortcut box, however), and the Start button is actually a Home button. you could install tarkim's key remapper and set a hard key to the left soft button, but I haven't used this in a while and it may require some touch input.
Also, I use ZoomBarPlus which makes the zoombar function as a d-pad with up/down, action, and back keys. If you follow the instructions on the thread, you can omit the inbox from the default action and have ZoomBar work with it.
If these don't do it for you, then just wait it out for a couple of days. TMo sends these replacements out very quickly.
Thanks a lot !! worked like charm !!
Im from India , a place where TP2 is not released ( Can you believe that ?? ) , Hence no service for it..
So checking out some new mobiles or will wait for Q1 of 2011 ..

[Q] Strange HW-Keyboard behavior

Hi,
im using the i927 with OsiMood-Rom.
Today its the second time, that my hardware keyboard behaves a bit strange:
- When I press "e" the Email App opens
- When I press "b" the browser opens
First time I got it "repaired" with a reboot, for now a re-open of the keyboard helped.
What is going on there?
That is not a weird behaviour but a feature. It's called "Quick Launch" and is started by pressing and holding the search button on hw keyboard plus any key in the hw keyboard. the "E" key is the default for email (press "Search" + "E" = Email), you can modify this in settings > applications > quick launch
Thanks, I mentioned that it's something like this but I didn't know what other button activates the shortcut or where to disable it
Roeni said:
Thanks, I mentioned that it's something like this but I didn't know what other button activates the shortcut or where to disable it
Click to expand...
Click to collapse
Like me, you might be using the "Search" button (either soft/hardware keys) to launch apps a lot.....most of the time, I end up pressing search plus the first character of an app i want to launch that results in pressing the two keys almost at the same time. That is how I accidentally discovered it....
I was like searching the "Email app" then I accidentally pressed the "E" key while the "Search" key is pressed then I went "How did this thing know that I want to launch Email?"
Press your search key again on your keyboard it is stuck. Happened to me once or twice. Quick launch is launching your short cuts that are programmed because it thinks you are hitting a 2 key combination. (Search and E)

Categories

Resources