PTT - Button 5 for 3.30.0.9 [LVSW Edition] - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hello All
Is any fix for PTT - button 5, when I push it a pop-up windows is saying "the file Start cannot be open, Either is not signed with a trusted certificate, or one of its components cannot be found, If te problem persists, try reinstalling or restoring this file" 10x4 help

yo3gjc said:
Hello All
Is any fix for PTT - button 5, when I push it a pop-up windows is saying "the file Start cannot be open, Either is not signed with a trusted certificate, or one of its components cannot be found, If te problem persists, try reinstalling or restoring this file" 10x4 help
Click to expand...
Click to collapse
in settings..buttons what is button 5 set to to open as an app?

from sleuth...

@shadowmite: PTTFix might not help this case since lvsw's ROM isn't from Cingular. Cingular removed button 5 from the standard mapping and attached it to PTT in their ROM. My fix traps the custom messages they generate then re-directs them by interpreting the button manager's registry entries.
@yo3gjc:Sounds like you're mapped to an invalid app or shortcut. You should be able to re-map button 5 using the button manager though.

PTT fix
Yapp, you are right, my device has a cingy origin, the PTT fix is not fixing my problem. Any idea is kindly appreciated

can you see button 5 in button manager? (start->settings->personal tab->Buttons). If so, please post a screencap so we can see what you're trying to tell us.

PTT fix
Yapp I can see it in Button Settings, Button 5 (press and hold), and I can select the application for it but is not functional and when I press it shows me that pop-up message

So it pops the error message no matter what app you select? Looks like a hard reset is in your near future....

PTT fix
Yes this is correct, no metter what apps I am selecting from Button selection the "poo-up" message is there, at least to disble the button, this one is the easiest to be pushed ), and sorry my newbee question, how to do a hard reset, my device is 3 days old, I am still learning it.
tks

Using hardware:
while holding down the left & right softkeys, press the reset button. Follow the instructions that appear on the screen
Using software:
in Settings->System Tab, choose "Clear Storage" and follow the instructions. Not all ROMs have this but yours should.

PTT fix
I've done a hard reset and still the PTT button is not working, another message there is no apps assign for the button but from the buttons selection regardless what apps I am selecting I am getting the same message. Tks for support

yo3gjc said:
Yapp I can see it in Button Settings, Button 5 (press and hold), and I can select the application for it but is not functional and when I press it shows me that pop-up message
Click to expand...
Click to collapse
you have to assign an application to Button 5, not Button 5 (press and hold)

BINGO!!!!! yes, you are right, is working, so Button 5 press and hold stays unassigned and assign to Button 5, Tks , you make my day

Related

press and hold button assignment error

I am unable to use any of the press and hold button assignments.
does not matter what I assign to the 'press and hold' button....it will not execute.
I know the apps work when assigned to the press buttons.
Any ideas on what is wrong or what needs to be corrected?
thanks
Nutton on the button issue anyone?
Try PTT fix cab and see if it fixes it!
Thanks for the response.................................
but that did not fix it.
any other ideas?
It is not crippling..just very inconvenient.....i would like to use all of the possible button functions.

[REF] Sky's Remote Record Service on Touch HD

I've always been frustrated that sky have never released remote record for windows mobile, and recently even more frustrated when i noticed they've released an official iphone version!
It's ok to use the java version if you have a keyboard on your phone but i've never managed to log-in using just a touchscreen, until not. Here's how:
Before doing the following make sure you have activated remote record from your sky account.
Firstly download and install AE-Button Plus. Set it up in the following way:
Volume Up:
1: Press Up arrow key
2: Press Left arrow key
3: Press Enter
Long: Press Left SoftKey
Volume Down:
1: Press Down arrow key
2: Press Right arrow key
3: Press Enter
Long: Press Right SoftKey
Next download and instal the attached file (SkyMobile_SonyWithoutTv.jar), it's the java version of sky remote record.
Once it's installed run it and you'll be presented with a login screen. The username field should be highlighted in yellow. Press the volume up key 3 times. Your keyboard should pop up. Enter your username and press ok.
now pres the volume down key once to highlight password then press again 3 times. Now enter your password and press ok. Press the volume up key for a few seconds to login. It should take a few seconds and you'll be logged in to sky's remote record service.
To navigate around it just use the key mappings from above.
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
trice1921 said:
I've always been frustrated that sky have never released remote record for windows mobile, and recently even more frustrated when i noticed they've released an official iphone version!
It's ok to use the java version if you have a keyboard on your phone but i've never managed to log-in using just a touchscreen, until not. Here's how:
Before doing the following make sure you have activated remote record from your sky account.
Firstly download and install AE-Button Plus. Set it up in the following way:
Volume Up:
1: Press Up arrow key
2: Press Left arrow key
3: Press Enter
Long: Press Left SoftKey
Volume Down:
1: Press Down arrow key
2: Press Right arrow key
3: Press Enter
Long: Press Right SoftKey
Next download and instal the attached file (SkyMobile_SonyWithoutTv.jar), it's the java version of sky remote record.
Once it's installed run it and you'll be presented with a login screen. The username field should be highlighted in yellow. Press the volume up key 3 times. Your keyboard should pop up. Enter your username and press ok.
now pres the volume down key once to highlight password then press again 3 times. Now enter your password and press ok. Press the volume up key for a few seconds to login. It should take a few seconds and you'll be logged in to sky's remote record service.
To navigate around it just use the key mappings from above.
Click to expand...
Click to collapse
Trice,
I had solved this a couple of weeks ago on www.coolsmartphone.com , where it had been discussed for the Kaiser, but could not get it to work simply by mapping the buttons as you mention (Left & Right Soft keys would not work even when mapped in aebutton plus). Had meant to post the solution here, but forgot!!
The built in java did not work for me, so i had to install the java software they provided...and there was a registry key change needed as well.
See http://www.coolsmartphone.com/forum/viewtopic.php?t=13782&postdays=0&postorder=asc&start=15 for my solution, I've posted it below as well.
Firstly, follow the instructions in the original article posted by gears ie. register on the web for sky mobile and download and install the java software and SkyMobile_SonyWithoutTv.jar file.
Also register for "Remote Record" via your Sky+ box (instructions on the Sky.com website)
Next, as the HD does not have a hardware keyboard, we need to "spoof" the OS into thinking the HD does have one. This is done in one key in the
registry (which I found completely by accident while looking for a different one!).
Goto... "HKCU/Software/Microsoft/Shell" and change the value of "HasKeyboard" to 1
Soft Reset the phone.
We will then need to map some of the buttons to give us up/down/left/right, Enter and Left/Right Soft keys. As NickMilner suggests above, i use "AE Button Plus" and my mapping instructions assume that's what you will use. (the program does cost but i don't know of any other one that provides double, triple and long press options for each key and appears to work well enough in free/trial mode anyway!)
Map the following in AE Button Plus
Volume Up button: Single press - Volume Up
Double press - Press Up Arrow
Triple press - Press Left Arrow
Long press - Press Left Soft Key
Volume Down Button: Single press - Volume Down
Double press - Press Down Arrow
Triple press - Press Right Arrow
Long press - Press Right Soft Key
Green Phone Button: Single Press - Press Green Button
Double Press - Press Enter
I would have liked to use the Red Phone button, but whatever selection i made, the red button always acted as an "Exit" button in the java app, so I went with the above. It's a bit complicated I know with all those double and triple presses, but IT WORKS and i've soon got used to it. I'm sure you could chose your own combination of presses, but the above ones work.
Well, there you go, see if it works for you (I Bl**dy hope so...this has taken me ages to write!!)
Click to expand...
Click to collapse
Slightly different key mappings than yours (mine keeps vol up/down on the same keys), but the effect is the same!
I would suggest people try whichever works for them.
cirrus363 said:
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
Click to expand...
Click to collapse
Yep, same here.
JimLin said:
Yep, same here.
Click to expand...
Click to collapse
Have you tried both mine and trice's methods?
colthekid said:
Have you tried both mine and trice's methods?
Click to expand...
Click to collapse
Sorry, I hadn't refreshed after I posted so hadn't seen your method. I'll try this evening.
cirrus363 said:
Got everything as you detailed......But trying to log in gives "Make sure tyou are connected" I thought logging in would instruct a connection! Connected to the internet and tried again! Same error message. Any suggestions? Ta
Click to expand...
Click to collapse
I was getting a connection error when i was trying to login while connected to activesync. I disconnected and tried again through 3g and it worked fine. Are you trying to connect through 3g?
I've downloaded the file, SkyMobile_SonyWithoutTv.jar.zip - and an app to open it, but I can't actually get it to run? I know it's bound to be something really simple, but can someone tell me what I'm likely to be doing wrong? Thanks.
Boris71 said:
I've downloaded the file, SkyMobile_SonyWithoutTv.jar.zip - and an app to open it, but I can't actually get it to run? I know it's bound to be something really simple, but can someone tell me what I'm likely to be doing wrong? Thanks.
Click to expand...
Click to collapse
You have to extract SkyMobile_SonyWithoutTv.jar from the zip file. Once you've done that move SkyMobile_SonyWithoutTv.jar to your HD and install it using the java client that should already be installed on the HD.
That helped me get a bit further thanks, only now, when I actually try to install it, I get the message, " The archive file (.jar) for /_SkyMobile_SonyWithoutTv.jar appears to be corrupt. -36".
Any ideas?
Can you not write a Dpad program to run the Jar program inside it???
trice1921 said:
I was getting a connection error when i was trying to login while connected to activesync. I disconnected and tried again through 3g and it worked fine. Are you trying to connect through 3g?
Click to expand...
Click to collapse
Yes I was standalone connecting to 3G.
Hi All,
I'm new to this forum, but I've been interested in the above problem for a while. I'm using the Xperia X1 Phone and have recently installed a windows mobile 6.5 rom - http://forum.xda-developers.com/showthread.php?t=508057
Previously I was using 6.1 and unable to connect to the application, receiving the message:
'The data connection has failed. Please check the network coverage'
From reading the previous comments and other threads I wasn't the only one. However, after installing the above rom, everything seems to be working perfectly (including remote record). I didn't even have to do any button mapping.
I think the internet config settings applied by my network provider (vodafone) was stopping the application from connecting. Installing the new rom applied default settings and eliminated what was causing the connection problems. I also tried via my WIFI connection, but it wouldn’t connect using this methos.
Hope some of this helps,
MJ
Followed the instructions as per OP, but seem to be struggling with AE Button Plus. I thought I'd mapped the buttons correctly, but they still don't work! Does anyone have any suggestions? (using v 2.6.6)
An update that might help some. I couldn't get AE Button to work with the CAB mentioned in this thread - so no Sky on my mobile! - but a different approach saw me try to access Sky Player using Skyfire ................ and it worked! A little bit fiddly, but useable.

Button remapping question

Alright, so I've tried AEButton plus, and dug around here for 2 days and haven't been able to find a solution.
I'd like to remap the "Home" and "Back" hardware buttons on my T-Mo TP2 to Arrow Down (for the Home) and Ok/Select for the Back. Since neither of those functions are an "application" I don't see how that would work.
A friend of mine wrote an app for the ATT Fuze that allows the PTT button to be visible in the standard button mapping area, but I don't know what the scan codes are for the Home and the Back buttons are. Anyone have an idea?
Otherwise, I'd love an application that actually... you know ... worked.
AEBplus can map to key strokes. I have Volume Up mapped to the Up arrow and Volume Down mapped to down arrow.
So I think you just need to:
* Add Button in AEBPlus
* Press the appropraite hardware button
* Select the new hardware button and edit it (I think you hit enter while it is selected).
* Choose the action as a keypress of Up Arrow or whatever you want.
when I try to add the volume buttons as a remap I just get the volume changed... any solution for that?
When I attempt to remap the Home and Back buttons on my T-Mobile TP2, it fails to map them. I've tried everything.
Volume kind of works, but I want those ... for the volume
Ghallo said:
but I don't know what the scan codes are for the Home and the Back buttons are. Anyone have an idea?
Click to expand...
Click to collapse
I'm not totally sure what mean by scan codes, but are these them: http://ae.inc.ru/aebpluscline.php ?
Aebutton Plus no longer maps vol keys w stock 6.5
Someone else in this thread is reporting what I'm seeing -
Before the 6.5 upgrade, Aebutton plus would let me remap the volume keys to do nothing on single or double press, then execute the volume change on the third press. I liked this because I've always found that I tend to turn the volume off inadvertently - and not just on this phone.
Now, it won't do this, and I can't disable the single or double press.
I've tried it with simplemode set in registry (one volume control, vs. ring and system) in either setting.
Does anyone have an idea as to what they've changed? I'd really like to be able to put this back the way it was.
try to use the program on this link http://forum.xda-developers.com/showthread.php?t=554240. This is the one I am using right now to map my home key into start menu button.
Im having the same issue. I need something to remap my buttons in order to scroll up and down and open task manager. I have Sprint TP2 with the 6.5 update and tried AEB already, any solutions?

touch screen out? no SOFT KEYS?

Soooo I had to call tmobile warranty. My touch on the my screen no longer works. But what I find crazy is that for this to be a phone that is not just ALL touch im starting to wonder why even have a keyboard or am i just dumb? I cannot press send on a text if i want to send a message. I cannot even save a number 2 my contacts. With out the touch screen am I just SOL till my new phone comes in the mail? I can make phone calls my opening up the keyboard and using the arrow keys. But the limitations with this phone and no touch screen are ridiculous.
Just wondering am I not able to do NOTHING while my touch screen is out? If anything I want to send text messages and I cannot even do that. Any help? PLEASE ASAP THANKS! CED
so 20 people gladly view my post and out of the 20 no replies...wow
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
cbeck said:
in your inbox for mms/text, press and hold H for a list of keyboard shortcuts. Press OK to get out of that list. press and hold key for desired shortcut. They are listed below:
H - List Shortcuts
A - Reply All
R - Reply
K- Mark Read/Unread
F - Flag
M - Move
O - Forward
D - Delete
L - Download Message
S - Send/Receive
But unfortunately, I can't figure out how to actually get the message to send once creating and typing it. Maybe you will have better luck.
Edit: actually you can use front facing buttonto get to start menu then use arrokeys and enter to navigate to (start->settings->personal->buttons), then you can set your ppt button or other button to left softkey and send that way... to get to set the button, use down arrow to get to the button you want,then right arrow once to highlight the "assign a program:" field, hit enter to expand that field, then scroll up or down with arrows to get to the <left softkey> (its at/near the top of the list), then hit enter and "OK" your way out of it. I'm assuming the version of the phone you have has the OK shortcut. You may need to soft reset afterwards, but should be good to go at that point.
Click to expand...
Click to collapse
The shortcuts are the same for his device, but you may have forgotten that the TMo version is unique in that it has no PTT button, no OK button (the enter key works fine to get rid of the shortcut box, however), and the Start button is actually a Home button. you could install tarkim's key remapper and set a hard key to the left soft button, but I haven't used this in a while and it may require some touch input.
Also, I use ZoomBarPlus which makes the zoombar function as a d-pad with up/down, action, and back keys. If you follow the instructions on the thread, you can omit the inbox from the default action and have ZoomBar work with it.
If these don't do it for you, then just wait it out for a couple of days. TMo sends these replacements out very quickly.
Thanks a lot !! worked like charm !!
Im from India , a place where TP2 is not released ( Can you believe that ?? ) , Hence no service for it..
So checking out some new mobiles or will wait for Q1 of 2011 ..

[Q] Strange HW-Keyboard behavior

Hi,
im using the i927 with OsiMood-Rom.
Today its the second time, that my hardware keyboard behaves a bit strange:
- When I press "e" the Email App opens
- When I press "b" the browser opens
First time I got it "repaired" with a reboot, for now a re-open of the keyboard helped.
What is going on there?
That is not a weird behaviour but a feature. It's called "Quick Launch" and is started by pressing and holding the search button on hw keyboard plus any key in the hw keyboard. the "E" key is the default for email (press "Search" + "E" = Email), you can modify this in settings > applications > quick launch
Thanks, I mentioned that it's something like this but I didn't know what other button activates the shortcut or where to disable it
Roeni said:
Thanks, I mentioned that it's something like this but I didn't know what other button activates the shortcut or where to disable it
Click to expand...
Click to collapse
Like me, you might be using the "Search" button (either soft/hardware keys) to launch apps a lot.....most of the time, I end up pressing search plus the first character of an app i want to launch that results in pressing the two keys almost at the same time. That is how I accidentally discovered it....
I was like searching the "Email app" then I accidentally pressed the "E" key while the "Search" key is pressed then I went "How did this thing know that I want to launch Email?"
Press your search key again on your keyboard it is stuck. Happened to me once or twice. Quick launch is launching your short cuts that are programmed because it thinks you are hitting a 2 key combination. (Search and E)

Categories

Resources